Re: Looking for a new self stick tape measure for my Legacy

2020-01-16 Thread 'Curt George' via Legacy Ornamental Mills 
 Thank you JIm.For the time being I will keep using my center finding ruler for 
this job.  Legacy used a 0 point tape on there Y axis... I am sure some how, 
Some way I will find what I seek, To everyone Please keep an eye out for this, 
for me.But, for at least this moment, this is not an emergency,must have for 
me.Thank you very much.
C.A.G.
On Thursday, January 16, 2020, 09:57:56 AM EST, Jim Riggen 
 wrote:  
 
 Curt,
These might work for you.
https://www.mscdirect.com/product/details/67754572    left to right
https://www.mscdirect.com/product/details/67754580?fromRR=Y   right to left



They're supposedly American made too!
Just butt the two together at the zero point.
Jim

On Tuesday, January 14, 2020 at 11:31:32 PM UTC-6, Curt George wrote:
 Thank you Mac.
I will let you know what I find.
C.A.G.
On Tuesday, January 14, 2020, 09:08:26 PM EST, MWF  
wrote:  
 
 Hi Curt,
Just saw your inquiry.
Try Kreg Tool Company at:   Steel TapesYou can bump two together (Left & Right 
reading ones) to give you the "center reading" effect.
Or try Incramental Tools:    Imperial Scales  (Scroll way down the page) 

And of course - Amazon - Here is a link to what is supposedly made by (for?) 
Starrett:   Starrett Tape - 12'
(At that price - it is supposed to be Starrett?  I suspect its made in China.)
Good luck,
Mac

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jan 9, 2020 8:43 AM
To: legacy-orna...@ googlegroups.com
Subject: Re: Looking for a new self stick tape measure for my Legacy

 Good morning everyone.Thank you for the reply's.Tim I will call. Bill I have 
thought of that, but I would like something more like what Legacy use to sell. 
(but if need be Thank you.)Tim Z. and Paul. Both thank you.  I find it funny 
something so simple is so hard to find...
The search go's on... ;-)
Have a good day.
C.A.G.On Thursday, January 9, 2020, 06:42:57 AM EST, Tim Ziegler 
 wrote:  
 Hey Curtis,
Fastcap sells steel tapes like that I'm just not sure about the width?
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Thu, Jan 9, 2020 at 12:17 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

Hello everyone.I am looking for a new adhesive tape for my Y axis.  it needs to 
be 0 to both left and right, like a center finding ruler.Everyone that owns a 
Legacy has what I am looking for, (it came with the machine.) But sadly for me. 
I need a new one and can not find them anywhere. dose anyone know where to find 
this tape? 
the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 
C.A.G.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/ 
msgid/legacy-ornamental-mills/ 1165209108.9592.1579054104323% 
40wamui-abby.atl.sa.earthlink. net.
  


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3fb93147-1b65-4039-a36f-ac3956aaf95c%40googlegroups.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1861709917.8580875.1579237211712%40mail.yahoo.com.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-16 Thread Jim Riggen 
Curt,

These might work for you.

https://www.mscdirect.com/product/details/67754572left to right

https://www.mscdirect.com/product/details/67754580?fromRR=Y   right to 
left


They're supposedly American made too!

Just butt the two together at the zero point.

Jim


On Tuesday, January 14, 2020 at 11:31:32 PM UTC-6, Curt George wrote:

> Thank you Mac.
>
> I will let you know what I find.
>
> C.A.G.
>
> On Tuesday, January 14, 2020, 09:08:26 PM EST, MWF  > wrote: 
>
>
> Hi Curt,
>
> Just saw your inquiry.
>
> Try Kreg Tool Company at:   Steel Tapes 
> <https://www.kregtool.com/store/c17/adhesive-tapes/>
> You can bump two together (Left & Right reading ones) to give you the 
> "center reading" effect.
>
> Or try Incramental Tools:Imperial Scales 
> <https://www.incrementaltools.com/ProductDetails.asp?ProductCode=PC-SCALES>  
> (Scroll way down the page) 
>
> And of course - Amazon - Here is a link to what is supposedly made by 
> (for?) Starrett:   Starrett Tape - 12' 
> <https://www.amazon.com/Starrett-SM412WRL-Adhesive-Graduation-Interval/dp/B003FWCSYG?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-ffsb-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B003FWCSYG>
> (At that price - it is supposed to be Starrett?  I suspect its made in 
> China.)
>
> Good luck,
> Mac
> --
> --
>
> -----Original Message- 
> From: 'Curt George' via Legacy Ornamental Mills 
> Sent: Jan 9, 2020 8:43 AM 
> To: legacy-orna...@googlegroups.com  
> Subject: Re: Looking for a new self stick tape measure for my Legacy 
>
> Good morning everyone.
> Thank you for the reply's.
> Tim I will call. 
> Bill I have thought of that, but I would like something more like what 
> Legacy use to sell. (but if need be Thank you.)
> Tim Z. and Paul. Both thank you.  I find it funny something so simple is 
> so hard to find...
>
> The search go's on... ;-)
>
> Have a good day.
>
> C.A.G.
> --
> --
> On Thursday, January 9, 2020, 06:42:57 AM EST, Tim Ziegler <
> timjz...@gmail.com > wrote: 
>
> Hey Curtis,
>
> Fastcap sells steel tapes like that I'm just not sure about the width?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
> --
> --
>
> On Thu, Jan 9, 2020 at 12:17 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com > wrote:
>
> Hello everyone.
> I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to 
> both left and right, like a center finding ruler.
> Everyone that owns a Legacy has what I am looking for, (it came with the 
> machine.) 
> But sadly for me. I need a new one and can not find them anywhere. dose 
> anyone know where to find this tape? 
>
> the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on 
> ether side would work out great. I don't even care about the color. (the 
> silver was nice, but I will go with anything I can read.) 
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1165209108.9592.1579054104323%40wamui-abby.atl.sa.earthlink.net
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1165209108.9592.1579054104323%40wamui-abby.atl.sa.earthlink.net?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3fb93147-1b65-4039-a36f-ac3956aaf95c%40googlegroups.com.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-14 Thread 'Curt George' via Legacy Ornamental Mills 
 Thank you Mac.
I will let you know what I find.
C.A.G.
On Tuesday, January 14, 2020, 09:08:26 PM EST, MWF  
wrote:  
 
 #yiv7832970893 #yiv7832970893 -- DIV {margin:0px;}#yiv7832970893 Hi Curt,
Just saw your inquiry.
Try Kreg Tool Company at:   Steel TapesYou can bump two together (Left & Right 
reading ones) to give you the "center reading" effect.
Or try Incramental Tools:    Imperial Scales  (Scroll way down the page) 

And of course - Amazon - Here is a link to what is supposedly made by (for?) 
Starrett:   Starrett Tape - 12'
(At that price - it is supposed to be Starrett?  I suspect its made in China.)
Good luck,
Mac

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jan 9, 2020 8:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for a new self stick tape measure for my Legacy

 Good morning everyone.Thank you for the reply's.Tim I will call. Bill I have 
thought of that, but I would like something more like what Legacy use to sell. 
(but if need be Thank you.)Tim Z. and Paul. Both thank you.  I find it funny 
something so simple is so hard to find...
The search go's on... ;-)
Have a good day.
C.A.G.On Thursday, January 9, 2020, 06:42:57 AM EST, Tim Ziegler 
 wrote:  
 Hey Curtis,
Fastcap sells steel tapes like that I'm just not sure about the width?
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Thu, Jan 9, 2020 at 12:17 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

Hello everyone.I am looking for a new adhesive tape for my Y axis.  it needs to 
be 0 to both left and right, like a center finding ruler.Everyone that owns a 
Legacy has what I am looking for, (it came with the machine.) But sadly for me. 
I need a new one and can not find them anywhere. dose anyone know where to find 
this tape? 
the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 
C.A.G.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1165209108.9592.1579054104323%40wamui-abby.atl.sa.earthlink.net.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1856007040.7782284.1579066289001%40mail.yahoo.com.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-14 Thread MWF 
Hi Curt,Just saw your inquiry.Try Kreg Tool Company at:   Steel TapesYou can bump two together (Left & Right reading ones) to give you the "center reading" effect.Or try Incramental Tools:    Imperial Scales  (Scroll way down the page) And of course - Amazon - Here is a link to what is supposedly made by (for?) Starrett:   Starrett Tape - 12'(At that price - it is supposed to be Starrett?  I suspect its made in China.)Good luck,Mac-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jan 9, 2020 8:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Looking for a new self stick tape measure for my Legacy


Good morning everyone.Thank you for the reply's.Tim I will call. Bill I have thought of that, but I would like something more like what Legacy use to sell. (but if need be Thank you.)Tim Z. and Paul. Both thank you.  I find it funny something so simple is so hard to find...The search go's on... ;-)Have a good day.C.A.G.





On Thursday, January 9, 2020, 06:42:57 AM EST, Tim Ziegler  wrote:



Hey Curtis,Fastcap sells steel tapes like that I'm just not sure about the width?Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Thu, Jan 9, 2020 at 12:17 AM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Hello everyone.I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to both left and right, like a center finding ruler.Everyone that owns a Legacy has what I am looking for, (it came with the machine.) But sadly for me. I need a new one and can not find them anywhere. dose anyone know where to find this tape? the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether side would work out great. I don't even care about the color. (the silver was nice, but I will go with anything I can read.) C.A.G.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1165209108.9592.1579054104323%40wamui-abby.atl.sa.earthlink.net.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-11 Thread 'Curt George' via Legacy Ornamental Mills 
This is not tape, but for the price isnt not bad.

https://www.amazon.com/Ludwig-Precision-Center-Finding-Aluminum-81206/dp/B01BX5IFCU/ref=pd_rhf_dp_s_pd_crcd_0_3/142-7486434-1227715?_encoding=UTF8&pd_rd_i=B01BX5KO5G&pd_rd_r=6265cabf-444e-4f05-977b-ee297c729118&pd_rd_w=nbgYT&pd_rd_wg=gJmId&pf_rd_p=1b93de15-e9af-47f7-b562-4ce91b743ae9&pf_rd_r=0GQCKE7W0YGBDGHGFEEH&refRID=0GQCKE7W0YGBDGHGFEEH&th=1
>  
>
 

> C.A.G. 
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/b8f795e8-53b9-4691-a225-6092fd10a7ac%40googlegroups.com.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-09 Thread 'Curt George' via Legacy Ornamental Mills 
 Good morning everyone.Thank you for the reply's.Tim I will call. Bill I have 
thought of that, but I would like something more like what Legacy use to sell. 
(but if need be Thank you.)Tim Z. and Paul. Both thank you.  I find it funny 
something so simple is so hard to find...
The search go's on... ;-)
Have a good day.
C.A.G.
On Thursday, January 9, 2020, 06:42:57 AM EST, Tim Ziegler 
 wrote:  
 
 Hey Curtis,
Fastcap sells steel tapes like that I'm just not sure about the width?
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Thu, Jan 9, 2020 at 12:17 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

Hello everyone.I am looking for a new adhesive tape for my Y axis.  it needs to 
be 0 to both left and right, like a center finding ruler.Everyone that owns a 
Legacy has what I am looking for, (it came with the machine.) But sadly for me. 
I need a new one and can not find them anywhere. dose anyone know where to find 
this tape? 
the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 
C.A.G. 



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGMJkYGrysTaJ0hi8GxtBGc1g93Te7vfGiBmiz4AD2uDA%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1855106121.5893415.1578577383030%40mail.yahoo.com.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-09 Thread Tim Ziegler 
Hey Curtis,

Fastcap sells steel tapes like that I'm just not sure about the width?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 9, 2020 at 12:17 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello everyone.
> I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to
> both left and right, like a center finding ruler.
> Everyone that owns a Legacy has what I am looking for, (it came with the
> machine.)
> But sadly for me. I need a new one and can not find them anywhere. dose
> anyone know where to find this tape?
>
> the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on
> ether side would work out great. I don't even care about the color. (the
> silver was nice, but I will go with anything I can read.)
>
> C.A.G.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGMJkYGrysTaJ0hi8GxtBGc1g93Te7vfGiBmiz4AD2uDA%40mail.gmail.com.

Re: Looking for a new self stick tape measure for my Legacy

2020-01-09 Thread Paul Richmond 
Check Fastcap.com, leevalley.com, or perhaps rockier.

Paul

>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAA5i9D6i1yUJFK6CakfQCCacHDQM6h3_Lxj%3DYRP%3DMJE-6Hxxhw%40mail.gmail.com.

RE: Looking for a new self stick tape measure for my Legacy

2020-01-09 Thread bulkeley 
Sorry tim thought it was curt answering 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of artmarb...@comcast.net
Sent: Thursday, 9 January 2020 7:09 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for a new self stick tape measure for my Legacy

 

We talk all the time. Do you feel left out? 😊

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Thursday, January 9, 2020 12:05 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for a new self stick tape measure for my Legacy

 

Call ? don’t mean email 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
artmarb...@comcast.net <mailto:artmarb...@comcast.net> 
Sent: Thursday, 9 January 2020 6:56 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for a new self stick tape measure for my Legacy

 

I’ve got a custom  on that you would like, give me a call on Saturday.

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, January 8, 2020 10:17 PM
To: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Looking for a new self stick tape measure for my Legacy

 

Hello everyone.

I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to both 
left and right, like a center finding ruler.

Everyone that owns a Legacy has what I am looking for, (it came with the 
machine.) 

But sadly for me. I need a new one and can not find them anywhere. dose anyone 
know where to find this tape? 

 

the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 

 

C.A.G. 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5c6c3%2471aad0c0%2455007240%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5c6c3%2471aad0c0%2455007240%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/00a101d5c6c4%241bd9dcd0%24538d9670%24%40comcast.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/00a101d5c6c4%241bd9dcd0%24538d9670%24%40comcast.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To u

RE: Looking for a new self stick tape measure for my Legacy

2020-01-09 Thread artmarbles 
We talk all the time. Do you feel left out? 😊

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Thursday, January 9, 2020 12:05 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for a new self stick tape measure for my Legacy

 

Call ? don’t mean email 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
artmarb...@comcast.net <mailto:artmarb...@comcast.net> 
Sent: Thursday, 9 January 2020 6:56 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Looking for a new self stick tape measure for my Legacy

 

I’ve got a custom  on that you would like, give me a call on Saturday.

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, January 8, 2020 10:17 PM
To: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Looking for a new self stick tape measure for my Legacy

 

Hello everyone.

I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to both 
left and right, like a center finding ruler.

Everyone that owns a Legacy has what I am looking for, (it came with the 
machine.) 

But sadly for me. I need a new one and can not find them anywhere. dose anyone 
know where to find this tape? 

 

the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 

 

C.A.G. 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5c6c3%2471aad0c0%2455007240%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5c6c3%2471aad0c0%2455007240%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/00a101d5c6c4%241bd9dcd0%24538d9670%24%40comcast.net.

RE: Looking for a new self stick tape measure for my Legacy

2020-01-09 Thread bulkeley 
Call ? don’t mean email 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of artmarb...@comcast.net
Sent: Thursday, 9 January 2020 6:56 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Looking for a new self stick tape measure for my Legacy

 

I’ve got a custom  on that you would like, give me a call on Saturday.

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, January 8, 2020 10:17 PM
To: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Looking for a new self stick tape measure for my Legacy

 

Hello everyone.

I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to both 
left and right, like a center finding ruler.

Everyone that owns a Legacy has what I am looking for, (it came with the 
machine.) 

But sadly for me. I need a new one and can not find them anywhere. dose anyone 
know where to find this tape? 

 

the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 

 

C.A.G. 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d5c6c3%2471aad0c0%2455007240%24%40mmnet.com.au.

RE: Looking for a new self stick tape measure for my Legacy

2020-01-08 Thread artmarbles 
I’ve got a custom  on that you would like, give me a call on Saturday.

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Wednesday, January 8, 2020 10:17 PM
To: 'Curt George' via Legacy Ornamental Mills 

Subject: Looking for a new self stick tape measure for my Legacy

 

Hello everyone.

I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to both 
left and right, like a center finding ruler.

Everyone that owns a Legacy has what I am looking for, (it came with the 
machine.) 

But sadly for me. I need a new one and can not find them anywhere. dose anyone 
know where to find this tape? 

 

the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 

 

C.A.G. 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/008901d5c6c2%242dc778a0%24895669e0%24%40comcast.net.

RE: Looking for a new self stick tape measure for my Legacy

2020-01-08 Thread bulkeley 
The only way I can find is to buy 2

https://www.amazon.com/Starrett-SM412WRL-Adhesive-Graduation-Interval/dp/B003FWCSYG/ref=sxbs_sxwds-stvp?cv_ct_cx=left+to+right+adhesive+measure+tape+5%2F16+wide
 

 
&keywords=left+to+right+adhesive+measure+tape+5%2F16+wide&pd_rd_i=B003FWCSYG&pd_rd_r=7fdd7da3-fc71-45a0-a993-1ae903ebd080&pd_rd_w=ogysH&pd_rd_wg=m3CKg&pf_rd_p=a6d018ad-f20b-46c9-8920-433972c7d9b7&pf_rd_r=0C3BRQQPFMAHD4H97M48&psc=1&qid=1578556016

 

 

https://www.amazon.com/Starrett-SM66W-Adhesive-Graduation-Interval/dp/B004HMDFRM/ref=sr_1_fkmr1_2?keywords=left+to+right+adhesive+measure+tape+5%2F16+wide
 

 &qid=1578556088&sr=8-2-fkmr1

 

and join them

 

Bill

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, 9 January 2020 5:17 PM
To: 'Curt George' via Legacy Ornamental Mills 

Subject: Looking for a new self stick tape measure for my Legacy

 

Hello everyone.

I am looking for a new adhesive tape for my Y axis.  it needs to be 0 to both 
left and right, like a center finding ruler.

Everyone that owns a Legacy has what I am looking for, (it came with the 
machine.) 

But sadly for me. I need a new one and can not find them anywhere. dose anyone 
know where to find this tape? 

 

the Legacy is 15" form out rail to rail, So a  tape with 0 and 7.5" on ether 
side would work out great. I don't even care about the color. (the silver was 
nice, but I will go with anything I can read.) 

 

C.A.G. 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1385044062.5817005.1578550591170%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d5c6c1%24c336bd70%2449a43850%24%40mmnet.com.au.