Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Tim Ziegler]

Call and ask for Cindy, she takes care of the parts of these machines. Not
everything is available and it takes a bit. But I just received my brand
new sets last week. So give her a call and see where it goes.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 20, 2019 at 10:12 AM Ryan Hellmer 
wrote:

> I thought LOM was no longer supporting any of the manual machines.  Where
> could I order a set?  The LWMCNC site pretty clearly says they no longer
> support. - Ryan
>
> Sent from my iPhone
>
> On Mar 20, 2019, at 10:01 AM, Tim Ziegler  wrote:
>
> Ok Bill I will ck on that as well.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Mar 20, 2019 at 9:49 AM Bill Bulkeley 
> wrote:
>
>> Tim i would be interested in a Linear Drive Motor if not too expensive
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
>> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
>> *Sent:* Thursday, 21 March 2019 12:39 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Prices on thin stock follower,thin stock support and
>> vertical Bench vise
>>
>>
>>
>> I'll let him know Ryan. If not these can still be ordered from LOM too
>>
>>
>>
>>
>>
>> On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer 
>> wrote:
>>
>> I’d be interested in a 2x multiplier gear set.  - Ryan
>>
>> Sent from my iPhone
>>
>>
>> On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:
>>
>> Curtis I have a guy that is parting out a 1000 steely.
>>
>> Can you send me copies of all the prices you have like you sent me
>> earlier?
>>
>>
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills
>>  wrote:
>>
>> Hello Tim
>>
>> This is what I found.
>>
>> I hope it helps?
>>
>>
>>
>> C.A.G.
>>
>>
>>
>>
>>
>>
>>
>> Thin Stock Support
>>
>> (part no. LTHINSTK)
>>
>>
>>
>> [image: Thin Stock Support]
>>
>>
>>
>> *$99.00* [image: Add To Cart]
>> <https://web.archive.org/web/20120505180504/http:/legacywoodworking.com/cart.cfm?add=15>
>>
>>
>>
>> *Projects*
>>
>> * featuring the Vertical Vise*:
>>
>>- Table
>>
>> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/galleryItem.cfm?project=90>
>>
>> Home
>> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/index.cfm>
>>  > Products
>> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/productList.cfm>
>>  > Mill Accessories
>> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/productList.cfm?type=2>
>>  >
>> Vertical Vise
>>
>> Cart : 1 items - $89.00 View
>> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/cart.cfm>
>>
>>
>>
>> Vertical Vise
>>
>> (part no. LVISEVERT10)
>>
>>
>>
>> [image: Vertical Vise]
>>
>>
>>
>> *$119.00* [image: Add To Cart]
>> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/cart.cfm?add=17>
>>
>>
>>
>>
>>
>> [image: Thin Stock Follower]
>> Thin Stock Follower
>> <https://web.archive.org/web/20101009040546/http:/legacywoodworking.com/products.cfm?product=99>
>>
>> ???$$$??? There is not price on this, It only shows up on three catolog
>> listings and none have a price on them.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler <
>> timjzieg...@gmail.com> wrote:
>>
>>
>>
>>
>>
>> Good morning All,
>>
>>
>>
>

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Ryan Hellmer]

I thought LOM was no longer supporting any of the manual machines.  Where could 
I order a set?  The LWMCNC site pretty clearly says they no longer support. - 
Ryan 

Sent from my iPhone

> On Mar 20, 2019, at 10:01 AM, Tim Ziegler  wrote:
> 
> Ok Bill I will ck on that as well.
> Kind Regards,
> 
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
> 
> 320-294-5798 shop
> 320-630-2243 cell
> 
> 
>> On Wed, Mar 20, 2019 at 9:49 AM Bill Bulkeley  wrote:
>> Tim i would be interested in a Linear Drive Motor if not too expensive
>> 
>>  
>> 
>> Bill
>> 
>>  
>> 
>> From: legacy-ornamental-mills@googlegroups.com 
>> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
>> Sent: Thursday, 21 March 2019 12:39 AM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Re: Prices on thin stock follower,thin stock support and vertical 
>> Bench vise
>> 
>>  
>> 
>> I'll let him know Ryan. If not these can still be ordered from LOM too
>> 
>>  
>> 
>>  
>> 
>> On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer  wrote:
>> 
>> I’d be interested in a 2x multiplier gear set.  - Ryan 
>> 
>> Sent from my iPhone
>> 
>> 
>> On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:
>> 
>> Curtis I have a guy that is parting out a 1000 steely.
>> 
>> Can you send me copies of all the prices you have like you sent me earlier?
>> 
>>  
>> 
>> 
>> 
>> Kind Regards,
>> 
>>  
>> 
>> Timothy J. Ziegler
>> 
>> Ziegler WoodWork & Specialty
>> 
>> 14171 160th Ave.
>> 
>> Foreston MN 56330
>> 
>>  
>> 
>> 320-294-5798 shop
>> 
>> 320-630-2243 cell
>> 
>>  
>> 
>>  
>> 
>> On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills 
>>  wrote:
>> 
>> Hello Tim
>> 
>> This is what I found.
>> 
>> I hope it helps?
>> 
>>  
>> 
>> C.A.G.
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> Thin Stock Support
>> 
>> (part no. LTHINSTK)
>> 
>>  
>> 
>> 
>>  
>> 
>> $99.00 
>> 
>> 
>> 
>> 
>> Projects
>> featuring the
>> Vertical Vise:
>> 
>> Table
>> Home > Products > Mill Accessories > Vertical Vise
>> 
>> Cart : 1 items - $89.00 View
>> 
>>  
>> 
>> Vertical Vise
>> 
>> (part no. LVISEVERT10)
>> 
>>  
>> 
>> 
>>  
>> 
>> $119.00 
>> 
>>  
>> 
>>  
>> 
>> 
>> Thin Stock Follower
>> 
>> ???$$$??? There is not price on this, It only shows up on three catolog 
>> listings and none have a price on them.
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler 
>>  wrote:
>> 
>>  
>> 
>>  
>> 
>> Good morning All,
>> 
>>  
>> 
>> Does anyone have a price list of the parts that were available for the LOM's 
>> besides what is listed in the back of the manual.
>> 
>>  
>> 
>> I have a lead on some parts I have been looking to purchase for my 1200 LOM  
>> and need to know what they cost originally to may a fair offer.
>> 
>>  
>> 
>> 1. Thin stock follower
>> 
>>  
>> 
>> 2. Thin Stock Support
>> 
>>  
>> 
>> 3. Vertical Bench Vise
>> 
>>  
>> 
>>  
>> 
>> Kind regards,
>> 
>>  
>> 
>>  
>> 
>> Tim of ZWW&S
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to 
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> T

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Tim Ziegler]

Ok Bill I will ck on that as well.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 20, 2019 at 9:49 AM Bill Bulkeley  wrote:

> Tim i would be interested in a Linear Drive Motor if not too expensive
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 21 March 2019 12:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Prices on thin stock follower,thin stock support and
> vertical Bench vise
>
>
>
> I'll let him know Ryan. If not these can still be ordered from LOM too
>
>
>
>
>
> On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer 
> wrote:
>
> I’d be interested in a 2x multiplier gear set.  - Ryan
>
> Sent from my iPhone
>
>
> On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:
>
> Curtis I have a guy that is parting out a 1000 steely.
>
> Can you send me copies of all the prices you have like you sent me earlier?
>
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Hello Tim
>
> This is what I found.
>
> I hope it helps?
>
>
>
> C.A.G.
>
>
>
>
>
>
>
> Thin Stock Support
>
> (part no. LTHINSTK)
>
>
>
> [image: Thin Stock Support]
>
>
>
> *$99.00* [image: Add To Cart]
> <https://web.archive.org/web/20120505180504/http:/legacywoodworking.com/cart.cfm?add=15>
>
>
>
> *Projects*
>
> * featuring the Vertical Vise*:
>
>- Table
>
> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/galleryItem.cfm?project=90>
>
> Home
> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/index.cfm>
>  > Products
> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/productList.cfm>
>  > Mill Accessories
> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/productList.cfm?type=2>
>  >
> Vertical Vise
>
> Cart : 1 items - $89.00 View
> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/cart.cfm>
>
>
>
> Vertical Vise
>
> (part no. LVISEVERT10)
>
>
>
> [image: Vertical Vise]
>
>
>
> *$119.00* [image: Add To Cart]
> <https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/cart.cfm?add=17>
>
>
>
>
>
> [image: Thin Stock Follower]
> Thin Stock Follower
> <https://web.archive.org/web/20101009040546/http:/legacywoodworking.com/products.cfm?product=99>
>
> ???$$$??? There is not price on this, It only shows up on three catolog
> listings and none have a price on them.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Good morning All,
>
>
>
> Does anyone have a price list of the parts that were available for the
> LOM's besides what is listed in the back of the manual.
>
>
>
> I have a lead on some parts I have been looking to purchase for my 1200
> LOM  and need to know what they cost originally to may a fair offer.
>
>
>
> 1. Thin stock follower
>
>
>
> 2. Thin Stock Support
>
>
>
> 3. Vertical Bench Vise
>
>
>
>
>
> Kind regards,
>
>
>
>
>
> Tim of ZWW&S
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mi

RE: Prices on thin stock follower,thin stock support and vertical Bench vise

[Bill Bulkeley]

Tim i would be interested in a Linear Drive Motor if not too expensive

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Thursday, 21 March 2019 12:39 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Prices on thin stock follower,thin stock support and vertical 
Bench vise

 

I'll let him know Ryan. If not these can still be ordered from LOM too

 

 

On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer  wrote:

I’d be interested in a 2x multiplier gear set.  - Ryan 

Sent from my iPhone


On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:

Curtis I have a guy that is parting out a 1000 steely.

Can you send me copies of all the prices you have like you sent me earlier?

 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

Hello Tim

This is what I found.

I hope it helps?

 

C.A.G.

 

 

 

Thin Stock Support

(part no. LTHINSTK)

 

 Thin Stock Support 
<https://web.archive.org/web/20120505180504im_/http:/legacywoodworking.com/images/product/15.jpg>
 

 

$99.00  
<https://web.archive.org/web/20120505180504/http:/legacywoodworking.com/cart.cfm?add=15>
 Add To Cart






Projects
featuring the
Vertical Vise:

*
<https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/galleryItem.cfm?project=90>
 Table

 
<https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/index.cfm>
 Home >  
<https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/productList.cfm>
 Products >  
<https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/productList.cfm?type=2>
 Mill Accessories > Vertical Vise

Cart : 1 items - $89.00  
<https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/cart.cfm>
 View

 


Vertical Vise

(part no. LVISEVERT10)

 

 Vertical Vise 
<https://web.archive.org/web/20061017023815im_/http:/www.legacywoodworking.com/images/product/17.jpg>
 

 

$119.00  
<https://web.archive.org/web/20061017023815/http:/www.legacywoodworking.com/cart.cfm?add=17>
 Add To Cart

 

 

 
<https://web.archive.org/web/20101009040546/http:/legacywoodworking.com/products.cfm?product=99>
 Thin Stock Follower
Thin Stock Follower

???$$$??? There is not price on this, It only shows up on three catolog 
listings and none have a price on them.

 

 

 

 

 

 

 

 

 

On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler  
wrote: 

 

 

Good morning All,

 

Does anyone have a price list of the parts that were available for the LOM's 
besides what is listed in the back of the manual.

 

I have a lead on some parts I have been looking to purchase for my 1200 LOM  
and need to know what they cost originally to may a fair offer.

 

1. Thin stock follower

 

2. Thin Stock Support

 

3. Vertical Bench Vise

 

 

Kind regards,

 

 

Tim of ZWW&S

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-m

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

['Curt George' via Legacy Ornamental Mills]

 Hello 
Timhttps://web.archive.org/web/20041205143900/http://www.legacywoodworking.com/productList.cfm?type=2
  OR this one.  
https://web.archive.org/web/20051025222338/http://www.legacywoodworking.com/productList.cfm?type=2
 I hope these help might help?

C.A.G.
On Wednesday, March 20, 2019, 9:39:42 AM EDT, Tim Ziegler 
 wrote:  
 
 I'll let him know Ryan. If not these can still be ordered from LOM too

On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer  wrote:

I’d be interested in a 2x multiplier gear set.  - Ryan 

Sent from my iPhone
On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:


Curtis I have a guy that is parting out a 1000 steely.Can you send me copies of 
all the prices you have like you sent me earlier?

Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

 Hello TimThis is what I found.I hope it helps?
C.A.G.



Thin Stock Support
(part no. LTHINSTK)



$99.00 
| 


Projects
featuring the
Vertical Vise:
   
   - Table
 | Home > Products > Mill Accessories > Vertical ViseCart : 1 items - $89.00 
View

| 
Vertical Vise
(part no. LVISEVERT10)



$119.00 


Thin Stock Follower
???$$$??? There is not price on this, It only shows up on three catolog 
listings and none have a price on them.








 |

 |


On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler 
 wrote:  
 
 Good morning All,
Does anyone have a price list of the parts that were available for the LOM's 
besides what is listed in the back of the manual.
I have a lead on some parts I have been looking to purchase for my 1200 LOM  
and need to know what they cost originally to may a fair offer.
1. Thin stock follower
2. Thin Stock Support
3. Vertical Bench Vise

Kind regards,

Tim of ZWW&S

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Tim Ziegler]

I'll let him know Ryan. If not these can still be ordered from LOM too


On Wed, Mar 20, 2019, 7:46 AM Ryan Hellmer  wrote:

> I’d be interested in a 2x multiplier gear set.  - Ryan
>
> Sent from my iPhone
>
> On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:
>
> Curtis I have a guy that is parting out a 1000 steely.
> Can you send me copies of all the prices you have like you sent me earlier?
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
>> Hello Tim
>> This is what I found.
>> I hope it helps?
>>
>> C.A.G.
>>
>>
>>
>> Thin Stock Support
>> (part no. LTHINSTK)
>>
>>
>> [image: Thin Stock Support]
>>
>> *$99.00* [image: Add To Cart]
>> 
>>
>>
>>
>>
>>
>> *Projectsfeaturing theVertical Vise*:
>>
>>- Table
>>
>> 
>>
>> Home
>> 
>>  > Products
>> 
>>  > Mill Accessories
>> 
>>  >
>> Vertical Vise
>> Cart : 1 items - $89.00 View
>> 
>>
>> Vertical Vise
>> (part no. LVISEVERT10)
>>
>>
>> [image: Vertical Vise]
>>
>> *$119.00* [image: Add To Cart]
>> 
>>
>>
>> [image: Thin Stock Follower]
>> Thin Stock Follower
>> 
>> ???$$$??? There is not price on this, It only shows up on three catolog
>> listings and none have a price on them.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler <
>> timjzieg...@gmail.com> wrote:
>>
>>
>> Good morning All,
>>
>> Does anyone have a price list of the parts that were available for the
>> LOM's besides what is listed in the back of the manual.
>>
>> I have a lead on some parts I have been looking to purchase for my 1200
>> LOM  and need to know what they cost originally to may a fair offer.
>>
>> 1. Thin stock follower
>>
>> 2. Thin Stock Support
>>
>> 3. Vertical Bench Vise
>>
>>
>> Kind regards,
>>
>>
>> Tim of ZWW&S
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Ryan Hellmer]

I’d be interested in a 2x multiplier gear set.  - Ryan 

Sent from my iPhone

> On Mar 20, 2019, at 7:13 AM, Tim Ziegler  wrote:
> 
> Curtis I have a guy that is parting out a 1000 steely.
> Can you send me copies of all the prices you have like you sent me earlier?
> 
> 
> Kind Regards,
> 
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
> 
> 320-294-5798 shop
> 320-630-2243 cell
> 
> 
>> On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills 
>>  wrote:
>> Hello Tim
>> This is what I found.
>> I hope it helps?
>> 
>> C.A.G.
>> 
>> 
>> 
>> Thin Stock Support
>> 
>> (part no. LTHINSTK)
>> 
>> 
>> 
>> $99.00 
>> 
>> 
>> 
>> Projects
>> featuring the
>> Vertical Vise:
>> Table
>> Home > Products > Mill Accessories > Vertical Vise
>> Cart : 1 items - $89.00 View
>> 
>> Vertical Vise
>> 
>> (part no. LVISEVERT10)
>> 
>> 
>> 
>> $119.00 
>> 
>> 
>> 
>> Thin Stock Follower
>> ???$$$??? There is not price on this, It only shows up on three catolog 
>> listings and none have a price on them.
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler 
>>  wrote:
>> 
>> 
>> Good morning All,
>> 
>> Does anyone have a price list of the parts that were available for the LOM's 
>> besides what is listed in the back of the manual.
>> 
>> I have a lead on some parts I have been looking to purchase for my 1200 LOM  
>> and need to know what they cost originally to may a fair offer.
>> 
>> 1. Thin stock follower
>> 
>> 2. Thin Stock Support
>> 
>> 3. Vertical Bench Vise
>> 
>> 
>> Kind regards,
>> 
>> 
>> Tim of ZWW&S
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to 
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to 
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Tim Ziegler]

Curtis I have a guy that is parting out a 1000 steely.
Can you send me copies of all the prices you have like you sent me earlier?


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Tim
> This is what I found.
> I hope it helps?
>
> C.A.G.
>
>
>
> Thin Stock Support
> (part no. LTHINSTK)
>
>
> [image: Thin Stock Support]
>
> *$99.00* [image: Add To Cart]
> 
>
>
>
>
>
> *Projectsfeaturing theVertical Vise*:
>
>- Table
>
> 
>
> Home
> 
>  > Products
> 
>  > Mill Accessories
> 
>  >
> Vertical Vise
> Cart : 1 items - $89.00 View
> 
>
> Vertical Vise
> (part no. LVISEVERT10)
>
>
> [image: Vertical Vise]
>
> *$119.00* [image: Add To Cart]
> 
>
>
> [image: Thin Stock Follower]
> Thin Stock Follower
> 
> ???$$$??? There is not price on this, It only shows up on three catolog
> listings and none have a price on them.
>
>
>
>
>
>
>
>
>
>
> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Good morning All,
>
> Does anyone have a price list of the parts that were available for the
> LOM's besides what is listed in the back of the manual.
>
> I have a lead on some parts I have been looking to purchase for my 1200
> LOM  and need to know what they cost originally to may a fair offer.
>
> 1. Thin stock follower
>
> 2. Thin Stock Support
>
> 3. Vertical Bench Vise
>
>
> Kind regards,
>
>
> Tim of ZWW&S
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

[Tim Ziegler]

exactly what I needed thanks Curtis
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Mar 18, 2019 at 7:22 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Tim
> This is what I found.
> I hope it helps?
>
> C.A.G.
>
>
>
> Thin Stock Support
> (part no. LTHINSTK)
>
>
> [image: Thin Stock Support]
>
> *$99.00* [image: Add To Cart]
> 
>
>
>
>
>
> *Projectsfeaturing theVertical Vise*:
>
>- Table
>
> 
>
> Home
> 
>  > Products
> 
>  > Mill Accessories
> 
>  >
> Vertical Vise
> Cart : 1 items - $89.00 View
> 
>
> Vertical Vise
> (part no. LVISEVERT10)
>
>
> [image: Vertical Vise]
>
> *$119.00* [image: Add To Cart]
> 
>
>
> [image: Thin Stock Follower]
> Thin Stock Follower
> 
> ???$$$??? There is not price on this, It only shows up on three catolog
> listings and none have a price on them.
>
>
>
>
>
>
>
>
>
>
> On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Good morning All,
>
> Does anyone have a price list of the parts that were available for the
> LOM's besides what is listed in the back of the manual.
>
> I have a lead on some parts I have been looking to purchase for my 1200
> LOM  and need to know what they cost originally to may a fair offer.
>
> 1. Thin stock follower
>
> 2. Thin Stock Support
>
> 3. Vertical Bench Vise
>
>
> Kind regards,
>
>
> Tim of ZWW&S
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Prices on thin stock follower,thin stock support and vertical Bench vise

['Curt George' via Legacy Ornamental Mills]

 Hello TimThis is what I found.I hope it helps?
C.A.G.



Thin Stock Support
(part no. LTHINSTK)



$99.00 
| 


Projects
featuring the
Vertical Vise:
   
   - Table
 | Home > Products > Mill Accessories > Vertical ViseCart : 1 items - $89.00 
View

| 
Vertical Vise
(part no. LVISEVERT10)



$119.00 


Thin Stock Follower
???$$$??? There is not price on this, It only shows up on three catolog 
listings and none have a price on them.








 |

 |


On Monday, March 18, 2019, 7:23:43 AM EDT, Tim Ziegler 
 wrote:  
 
 Good morning All,
Does anyone have a price list of the parts that were available for the LOM's 
besides what is listed in the back of the manual.
I have a lead on some parts I have been looking to purchase for my 1200 LOM  
and need to know what they cost originally to may a fair offer.
1. Thin stock follower
2. Thin Stock Support
3. Vertical Bench Vise

Kind regards,

Tim of ZWW&S

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.