RE: Holy Smokes!
Can’t take it with you .I’m having mine disassembled and put in the box with me lolol :-)::-):-):-) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bawdsey64 Sent: Tuesday, 12 February 2019 9:22 PM To: MWF; Mike Pung Subject: Re: Holy Smokes! Hi Mac, Thought for the day. Sometimes that "slope" stays level but gets very, very, very hot at the end. It is one of lives certainties and you cannot take your Legacy with you but you can leave behind a number of legacies including a big red Legacy! Cheers Roger From: MWF Received: 12/02/2019 03:37:40 +00:00 To: legacy-ornamental-mills@googlegroups.com Mike, Thanks. Yes, it does. It appears that that "slope into the ground" gets steeper as time goes on. Mac -Original Message- From: "Okla Mike (Liltwisted)" Sent: Feb 11, 2019 10:29 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! It was on Feb 5th 2013, Time flies On 2/11/2019 9:24 PM, MWF wrote: Yes Bill, I heard it too - with your own ears too. LoL That conference call (or whatever it was) was about 8-10 years ago if I remember correctly. Thanks for reminding the Group members about it. Great point. Mac -Original Message- From: Bill Bulkeley Sent: Feb 11, 2019 4:02 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Holy Smokes! A while back legacy did a live pod cast with the members of this group and I heard with my own ears that the members of this group were given permission to share information about the old manual mills amongst each other in the group so you didn’t do anything wrong and to get a woodchuck manual again in sure you would be forgiven even if you did Bill From: <mailto:legacy-ornamental-mills@googlegroups.com> legacy-ornamental-mills@googlegroups.com [ <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler Sent: Tuesday, 12 February 2019 3:32 AM To: <mailto:legacy-ornamental-mills@googlegroups.com> legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause < <mailto:artmarb...@comcast.net> artmarb...@comcast.net> wrote: There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, at 4:15 AM, Tim Ziegler < <mailto:timjzieg...@gmail.com> timjzieg...@gmail.com> wrote: Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < <mailto:artmarb...@comcast.net> artmarb...@comcast.net> wrote: OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, at 6:50 PM, Tim Ziegler < <mailto:timjzieg...@gmail.com> timjzieg...@gmail.com> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. <https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf> https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < <mailto:rick.wat...@gmail.com> rick.wat...@gmail.com> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then
Re: Holy Smokes!
Hi Mac, Thought for the day. Sometimes that "slope" stays level but gets very, very, very hot at the end. It is one of lives certainties and you cannot take your Legacy with you but you can leave behind a number of legacies including a big red Legacy! Cheers Roger From: MWF Received: 12/02/2019 03:37:40 +00:00 To: legacy-ornamental-mills@googlegroups.com Mike, Thanks. Yes, it does. It appears that that "slope into the ground" gets steeper as time goes on. Mac -Original Message- From: "Okla Mike (Liltwisted)" Sent: Feb 11, 2019 10:29 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! It was on Feb 5th 2013, Time flies On 2/11/2019 9:24 PM, MWF wrote: Yes Bill, I heard it too - with your own ears too. LoL That conference call (or whatever it was) was about 8-10 years ago if I remember correctly. Thanks for reminding the Group members about it. Great point. Mac -Original Message- From: Bill Bulkeley Sent: Feb 11, 2019 4:02 PM To: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] Subject: RE: Holy Smokes! A while back legacy did a live pod cast with the members of this group and I heard with my own ears that the members of this group were given permission to share information about the old manual mills amongst each other in the group so you didn’t do anything wrong and to get a woodchuck manual again in sure you would be forgiven even if you did Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] [mailto:legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com]] On Behalf Of Tim Ziegler Sent: Tuesday, 12 February 2019 3:32 AM To: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] Subject: Re: Holy Smokes! Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause mailto:artmarb...@comcast.net]> wrote: There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, at 4:15 AM, Tim Ziegler mailto:timjzieg...@gmail.com]> wrote: Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < artmarb...@comcast.net [mailto:artmarb...@comcast.net]> wrote: OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, at 6:50 PM, Tim Ziegler < timjzieg...@gmail.com [mailto:timjzieg...@gmail.com]> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf [https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf] Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com [mailto:rick.wat...@gmail.com]> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you see how
Re: Holy Smokes!
Mike,Thanks. Yes, it does. It appears that that "slope into the ground" gets steeper as time goes on.Mac-Original Message- From: "Okla Mike (Liltwisted)" Sent: Feb 11, 2019 10:29 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! It was on Feb 5th 2013, Time flies On 2/11/2019 9:24 PM, MWF wrote: Yes Bill, I heard it too - with your own ears too. LoL That conference call (or whatever it was) was about 8-10 years ago if I remember correctly. Thanks for reminding the Group members about it. Great point. Mac -Original Message- From: Bill Bulkeley Sent: Feb 11, 2019 4:02 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Holy Smokes! A while back legacy did a live pod cast with the members of this group and I heard with my own ears that the members of this group were given permission to share information about the old manual mills amongst each other in the group so you didn’t do anything wrong and to get a woodchuck manual again in sure you would be forgiven even if you did Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler Sent: Tuesday, 12 February 2019 3:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause <artmarb...@comcast.net> wrote: There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, at 4:15 AM, Tim Ziegler <timjzieg...@gmail.com> wrote: Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards,
Re: Holy Smokes!
It was on Feb 5th 2013, Time flies On 2/11/2019 9:24 PM, MWF wrote: Yes Bill, I heard it too - with *your own ears* too. LoL That conference call (or whatever it was) was about 8-10 years ago if I remember correctly. Thanks for reminding the Group members about it. Great point. Mac -Original Message- From: Bill Bulkeley Sent: Feb 11, 2019 4:02 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Holy Smokes! A while back legacy did a live pod cast with the members of this group and I heard with my own ears that the members of this group were given permission to share information about the old manual mills amongst each other in the group so you didn’t do anything wrong and to get a woodchuck manual again in sure you would be forgiven even if you did Bill *From:*legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler *Sent:* Tuesday, 12 February 2019 3:32 AM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* Re: Holy Smokes! Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause mailto:artmarb...@comcast.net>> wrote: There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, at 4:15 AM, Tim Ziegler mailto:timjzieg...@gmail.com>> wrote: Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < artmarb...@comcast.net <mailto:artmarb...@comcast.net>> wrote: OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, at 6:50 PM, Tim Ziegler < timjzieg...@gmail.com <mailto:timjzieg...@gmail.com>> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com <mailto:rick.wat...@gmail.com>> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you s
RE: Holy Smokes!
Yes Bill, I heard it too - with your own ears too. LoLThat conference call (or whatever it was) was about 8-10 years ago if I remember correctly.Thanks for reminding the Group members about it. Great point.Mac-Original Message- From: Bill Bulkeley Sent: Feb 11, 2019 4:02 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Holy Smokes! A while back legacy did a live pod cast with the members of this group and I heard with my own ears that the members of this group were given permission to share information about the old manual mills amongst each other in the group so you didn’t do anything wrong and to get a woodchuck manual again in sure you would be forgiven even if you did Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler Sent: Tuesday, 12 February 2019 3:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause <artmarb...@comcast.net> wrote: There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, at 4:15 AM, Tim Ziegler <timjzieg...@gmail.com> wrote: Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < artmarb...@comcast.net> wrote: OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, at 6:50 PM, Tim Ziegler < timjzieg...@gmail.com> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you see how configurable this is up close, your mind runs wild! If anyone has a Woodchuck manual, or even an extra one, I'd be interested it copying it. The company I own is a professional training company, and I make training manuals all the time. I can make PDFs out of anything. So if you want, I can make professional manuals that are out of print... Just an offer. Thanks again to Mike Pung! Rick -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this grou
Re: Holy Smokes!
Thanks you guys. On Mon, Feb 11, 2019, 3:02 PM Bill Bulkeley A while back legacy did a live pod cast with the members of this group and > I heard with my own ears that the members of this group were given > permission to share information about the old manual mills amongst each > other in the group so you didn’t do anything wrong and to get a woodchuck > manual again in sure you would be forgiven even if you did > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, 12 February 2019 3:32 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Holy Smokes! > > > > Did I do something wrong? > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Feb 11, 2019 at 9:39 AM Tim Krause wrote: > > There's things silently going on in the background when it comes to the > information not getting lost. No worries there. > > Tim > > On Feb 11, 2019, at 4:15 AM, Tim Ziegler wrote: > > Hey Tim, > > My Pleasure. I am honestly glad I was able to contribute something that > others will benefit from. I just happened to connect with the right person > the day when I started my search. Now if a few guys save it to their > computers and or a DVD or something. I printed it off of course too. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < artmarb...@comcast.net> > wrote: > > OMG, I can die now knowing the official woodchuck manual has been found. > Long mystified to be lost and never to be found again...at Legacy even!!! > Thanks for sharing this Tim, it honestly has been well over a 10 year > search. > > Tim > > On Feb 10, 2019, at 6:50 PM, Tim Ziegler < timjzieg...@gmail.com> wrote: > > Ok Rick, > > > > This may not be exactly the manual but has tons of the info you need and > want. this what legacy sent me when I landed my big catch AKA the WoodChuck > > Triple click or highlight the link right click once pick go too... and > there you go. hope it helps. > > > https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf > > > > Let me know if you can open it. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> > wrote: > > OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), > and I haven't really touched it since I got it. Mostly because I had an > unheated garage as a workshop, and Chicago temps have been prohibitively > cold lately. > > > > I took 20 minutes this morning to take the crank handle Mike Pung sent me > (thanks Mike!) out and figure out how it goes on the machine. I had to > take off some giant washers, but figured it out. > > > > Then I started taking a bunch of parts off that were rust frozen, oiled > them up and got some of the surface rust off so they could move freely (to > some extent). > > > > Then I saw it... This machine is AWESOME! I'm still not sure about a lot > of things, but the possibilities are endless! I just wanted something to > make pool cues with, but this can do so much more! > > > > Yeah, I've seen the braiding and twist videos, flute routing and all > that. But when you see how configurable this is up close, your mind runs > wild! > > > > If anyone has a Woodchuck manual, or even an extra one, I'd be interested > it copying it. The company I own is a professional training company, and I > make training manuals all the time. I can make PDFs out of anything. So > if you want, I can make professional manuals that are out of print... Just > an offer. > > > > Thanks again to Mike Pung! > > > > Rick > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >
RE: Holy Smokes!
A while back legacy did a live pod cast with the members of this group and I heard with my own ears that the members of this group were given permission to share information about the old manual mills amongst each other in the group so you didn’t do anything wrong and to get a woodchuck manual again in sure you would be forgiven even if you did Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler Sent: Tuesday, 12 February 2019 3:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause wrote: There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, at 4:15 AM, Tim Ziegler wrote: Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < artmarb...@comcast.net> wrote: OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, at 6:50 PM, Tim Ziegler < timjzieg...@gmail.com> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0 <https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf> &preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you see how configurable this is up close, your mind runs wild! If anyone has a Woodchuck manual, or even an extra one, I'd be interested it copying it. The company I own is a professional training company, and I make training manuals all the time. I can make PDFs out of anything. So if you want, I can make professional manuals that are out of print... Just an offer. Thanks again to Mike Pung! Rick -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com
Re: Holy Smokes!
Recollection of copyright laws.I think you can duplicate anything you wish as long as it is not sold in the market max From: legacy-ornamental-mills@googlegroups.com on behalf of Tim Ziegler Sent: Monday, February 11, 2019 10:29 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! Did I do something wrong again??? This manual came from Legacy. Sorry if I wasn't suppose to share that. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:47 AM Tim Krause mailto:artmarb...@comcast.net>> wrote: Hi, I can answer this question. I am the only person that has the right to redistribute the manuals and videos. There are certain conditions that do apply. Of them the most important one is the material must only be redistributed to members in this group and preferable to owners of the equipment. If anyone else claims to be selling copies or CDs of information, that is extremely prohibited. If there are copies of the full training menus on eBay or any other streaming services, they are also prohibited. If you or anyone else have any questions, feel free to ask in the group or to my personal email address. Tim On Feb 11, 2019, at 6:23 AM, Ray Leaman mailto:view...@gmail.com>> wrote: Not to be a Debbie Downer but page 2 shows Copyright by Phantom Engineering in 1991. I'm no expert on copyright law but just sayin...is Legacy permission needed before duplicating??? On Sun, Feb 10, 2019 at 11:20 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>> wrote: Hello Rick Welcome to the OM world.(that is Ornamental Milling) I am glad that you can see the potential for your Wood Chuck. There are some pretty neat things you can do with your Ornamental mill. I cant wait to see what you come up with. Wishing you the best of luck. C.A.G. On Sunday, February 10, 2019, 10:03:02 PM EST, Rick Waters < rick.wat...@gmail.com<mailto:rick.wat...@gmail.com>> wrote: Wow! That's perfect! Thanks!!! On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler < timjzieg...@gmail.com<mailto:timjzieg...@gmail.com>> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com<mailto:rick.wat...@gmail.com>> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you see how configurable this is up close, your mind runs wild! If anyone has a Woodchuck manual, or even an extra one, I'd be interested it copying it. The company I own is a professional training company, and I make training manuals all the time. I can make PDFs out of anything. So if you want, I can make professional manuals that are out of print... Just an offer. Thanks again to Mike Pung! Rick -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message bec
Re: Holy Smokes!
Did I do something wrong? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:39 AM Tim Krause wrote: > There's things silently going on in the background when it comes to the > information not getting lost. No worries there. > > Tim > On Feb 11, 2019, at 4:15 AM, Tim Ziegler wrote: >> >> Hey Tim, >> My Pleasure. I am honestly glad I was able to contribute something that >> others will benefit from. I just happened to connect with the right person >> the day when I started my search. Now if a few guys save it to their >> computers and or a DVD or something. I printed it off of course too. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Mon, Feb 11, 2019 at 12:36 AM Tim Krause < artmarb...@comcast.net> >> wrote: >> >>> OMG, I can die now knowing the official woodchuck manual has been >>> found. Long mystified to be lost and never to be found again...at Legacy >>> even!!! Thanks for sharing this Tim, it honestly has been well over a 10 >>> year search. >>> >>> Tim >>> On Feb 10, 2019, at 6:50 PM, Tim Ziegler < timjzieg...@gmail.com> >>> wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> wrote: > OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 > months), and I haven't really touched it since I got it. Mostly because I > had an unheated garage as a workshop, and Chicago temps have been > prohibitively cold lately. > > I took 20 minutes this morning to take the crank handle Mike Pung sent > me (thanks Mike!) out and figure out how it goes on the machine. I had to > take off some giant washers, but figured it out. > > Then I started taking a bunch of parts off that were rust frozen, > oiled them up and got some of the surface rust off so they could move > freely (to some extent). > > Then I saw it... This machine is AWESOME! I'm still not sure about a > lot of things, but the possibilities are endless! I just wanted something > to make pool cues with, but this can do so much more! > > Yeah, I've seen the braiding and twist videos, flute routing and all > that. But when you see how configurable this is up close, your mind runs > wild! > > If anyone has a Woodchuck manual, or even an extra one, I'd be > interested it copying it. The company I own is a professional training > company, and I make training manuals all the time. I can make PDFs out of > anything. So if you want, I can make professional manuals that are out of > print... Just an offer. > > Thanks again to Mike Pung! > > Rick > > -- > You received this message because you are subscribed to the Google > Groups "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To post to this group, send email to >>> legacy-ornamental-mills@googlegroups.com. >>> Visit this group at >>> https://groups.google.com/group/legacy-ornamental-mills. >>> For m
Re: Holy Smokes!
Did I do something wrong again??? This manual came from Legacy. Sorry if I wasn't suppose to share that. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 9:47 AM Tim Krause wrote: > Hi, > > I can answer this question. I am the only person that has the right to > redistribute the manuals and videos. There are certain conditions that do > apply. Of them the most important one is the material must only be > redistributed to members in this group and preferable to owners of the > equipment. If anyone else claims to be selling copies or CDs of > information, that is extremely prohibited. If there are copies of the full > training menus on eBay or any other streaming services, they are also > prohibited. If you or anyone else have any questions, feel free to ask in > the group or to my personal email address. > > Tim > On Feb 11, 2019, at 6:23 AM, Ray Leaman wrote: >> >> Not to be a Debbie Downer but page 2 shows Copyright by Phantom >> Engineering in 1991. >> >> I'm no expert on copyright law but just sayin...is Legacy permission >> needed before duplicating??? >> >> On Sun, Feb 10, 2019 at 11:20 PM 'Curt George' via Legacy Ornamental >> Mills < legacy-ornamental-mills@googlegroups.com> wrote: >> >>> Hello Rick >>> Welcome to the OM world.(that is Ornamental Milling) >>> I am glad that you can see the potential for your Wood Chuck. There are >>> some pretty neat things you can do with >>> your Ornamental mill. >>> I cant wait to see what you come up with. >>> Wishing you the best of luck. >>> >>> C.A.G. >>> >>> On Sunday, February 10, 2019, 10:03:02 PM EST, Rick Waters < >>> rick.wat...@gmail.com> wrote: >>> >>> >>> Wow! That's perfect! Thanks!!! >>> >>> On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler < timjzieg...@gmail.com> >>> wrote: >>> >>> Ok Rick, >>> >>> This may not be exactly the manual but has tons of the info you need and >>> want. this what legacy sent me when I landed my big catch AKA the WoodChuck >>> Triple click or highlight the link right click once pick go too... and >>> there you go. hope it helps. >>> >>> https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf >>> >>> Let me know if you can open it. >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 shop >>> 320-630-2243 cell >>> >>> >>> On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> >>> wrote: >>> >>> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 >>> months), and I haven't really touched it since I got it. Mostly because I >>> had an unheated garage as a workshop, and Chicago temps have been >>> prohibitively cold lately. >>> >>> I took 20 minutes this morning to take the crank handle Mike Pung sent >>> me (thanks Mike!) out and figure out how it goes on the machine. I had to >>> take off some giant washers, but figured it out. >>> >>> Then I started taking a bunch of parts off that were rust frozen, oiled >>> them up and got some of the surface rust off so they could move freely (to >>> some extent). >>> >>> Then I saw it... This machine is AWESOME! I'm still not sure about a >>> lot of things, but the possibilities are endless! I just wanted something >>> to make pool cues with, but this can do so much more! >>> >>> Yeah, I've seen the braiding and twist videos, flute routing and all >>> that. But when you see how configurable this is up close, your mind runs >>> wild! >>> >>> If anyone has a Woodchuck manual, or even an extra one, I'd be >>> interested it copying it. The company I own is a professional training >>> company, and I make training manuals all the time. I can make PDFs out of >>> anything. So if you want, I can make professional manuals that are out of >>> print... Just an offer. >>> >>> Thanks again to Mike Pung! >>> >>> Rick >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To post to this group, send email to >>> legacy-ornamental-mills@googlegroups.com. >>> Visit this group at >>> https://groups.google.com/group/legacy-ornamental-mills. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To post to this group, send email to >>> legacy-ornamental-mills@googlegroups.com. >>> Visit this group at >>> https://groups.google.com/group/legacy-ornamental-mills. >>> For more options, visit https://groups.google.com/d/optou
Re: Holy Smokes!
Hi, I can answer this question. I am the only person that has the right to redistribute the manuals and videos. There are certain conditions that do apply. Of them the most important one is the material must only be redistributed to members in this group and preferable to owners of the equipment. If anyone else claims to be selling copies or CDs of information, that is extremely prohibited. If there are copies of the full training menus on eBay or any other streaming services, they are also prohibited. If you or anyone else have any questions, feel free to ask in the group or to my personal email address. Tim On Feb 11, 2019, 6:23 AM, at 6:23 AM, Ray Leaman wrote: >Not to be a Debbie Downer but page 2 shows Copyright by Phantom >Engineering >in 1991. > >I'm no expert on copyright law but just sayin...is Legacy permission >needed >before duplicating??? > >On Sun, Feb 10, 2019 at 11:20 PM 'Curt George' via Legacy Ornamental >Mills < >legacy-ornamental-mills@googlegroups.com> wrote: > >> Hello Rick >> Welcome to the OM world.(that is Ornamental Milling) >> I am glad that you can see the potential for your Wood Chuck. There >are >> some pretty neat things you can do with >> your Ornamental mill. >> I cant wait to see what you come up with. >> Wishing you the best of luck. >> >> C.A.G. >> >> On Sunday, February 10, 2019, 10:03:02 PM EST, Rick Waters < >> rick.wat...@gmail.com> wrote: >> >> >> Wow! That's perfect! Thanks!!! >> >> On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler >wrote: >> >> Ok Rick, >> >> This may not be exactly the manual but has tons of the info you need >and >> want. this what legacy sent me when I landed my big catch AKA the >WoodChuck >> Triple click or highlight the link right click once pick go too... >and >> there you go. hope it helps. >> >> >https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf >> >> Let me know if you can open it. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Sun, Feb 10, 2019 at 12:02 PM Rick Waters >> wrote: >> >> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 >months), >> and I haven't really touched it since I got it. Mostly because I had >an >> unheated garage as a workshop, and Chicago temps have been >prohibitively >> cold lately. >> >> I took 20 minutes this morning to take the crank handle Mike Pung >sent me >> (thanks Mike!) out and figure out how it goes on the machine. I had >to >> take off some giant washers, but figured it out. >> >> Then I started taking a bunch of parts off that were rust frozen, >oiled >> them up and got some of the surface rust off so they could move >freely (to >> some extent). >> >> Then I saw it... This machine is AWESOME! I'm still not sure about >a lot >> of things, but the possibilities are endless! I just wanted >something to >> make pool cues with, but this can do so much more! >> >> Yeah, I've seen the braiding and twist videos, flute routing and all >> that. But when you see how configurable this is up close, your mind >runs >> wild! >> >> If anyone has a Woodchuck manual, or even an extra one, I'd be >interested >> it copying it. The company I own is a professional training company, >and I >> make training manuals all the time. I can make PDFs out of anything. > So >> if you want, I can make professional manuals that are out of print... > Just >> an offer. >> >> Thanks again to Mike Pung! >> >> Rick >> >> -- >> You received this message because you are subscribed to the Google >Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, >send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google >Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, >send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google >Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, >send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills.
Re: Holy Smokes!
There's things silently going on in the background when it comes to the information not getting lost. No worries there. Tim On Feb 11, 2019, 4:15 AM, at 4:15 AM, Tim Ziegler wrote: >Hey Tim, >My Pleasure. I am honestly glad I was able to contribute something that >others will benefit from. I just happened to connect with the right >person >the day when I started my search. Now if a few guys save it to their >computers and or a DVD or something. I printed it off of course too. >Kind Regards, > >Timothy J. Ziegler >Ziegler WoodWork & Specialty >14171 160th Ave. >Foreston MN 56330 > >320-294-5798 shop >320-630-2243 cell > > >On Mon, Feb 11, 2019 at 12:36 AM Tim Krause >wrote: > >> OMG, I can die now knowing the official woodchuck manual has been >found. >> Long mystified to be lost and never to be found again...at Legacy >even!!! >> Thanks for sharing this Tim, it honestly has been well over a 10 year >> search. >> >> Tim >> On Feb 10, 2019, at 6:50 PM, Tim Ziegler >wrote: >>> >>> Ok Rick, >>> >>> This may not be exactly the manual but has tons of the info you need >and >>> want. this what legacy sent me when I landed my big catch AKA the >WoodChuck >>> Triple click or highlight the link right click once pick go too... >and >>> there you go. hope it helps. >>> >>> >https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf >>> >>> Let me know if you can open it. >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 shop >>> 320-630-2243 cell >>> >>> >>> On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < >rick.wat...@gmail.com> >>> wrote: >>> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly >because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung >sent me (thanks Mike!) out and figure out how it goes on the machine. I >had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, >oiled them up and got some of the surface rust off so they could move >freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure >about a lot of things, but the possibilities are endless! I just wanted >something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and >all that. But when you see how configurable this is up close, your >mind runs wild! If anyone has a Woodchuck manual, or even an extra one, I'd be interested it copying it. The company I own is a professional >training company, and I make training manuals all the time. I can make PDFs >out of anything. So if you want, I can make professional manuals that are >out of print... Just an offer. Thanks again to Mike Pung! Rick -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, >send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. >>> -- >>> You received this message because you are subscribed to the Google >Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, >send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To post to this group, send email to >>> legacy-ornamental-mills@googlegroups.com. >>> Visit this group at >>> https://groups.google.com/group/legacy-ornamental-mills. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to the Google >Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, >send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To post to this group, send email to >legacy-ornamental-mills@goo
Re: Holy Smokes!
Not to be a Debbie Downer but page 2 shows Copyright by Phantom Engineering in 1991. I'm no expert on copyright law but just sayin...is Legacy permission needed before duplicating??? On Sun, Feb 10, 2019 at 11:20 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Rick > Welcome to the OM world.(that is Ornamental Milling) > I am glad that you can see the potential for your Wood Chuck. There are > some pretty neat things you can do with > your Ornamental mill. > I cant wait to see what you come up with. > Wishing you the best of luck. > > C.A.G. > > On Sunday, February 10, 2019, 10:03:02 PM EST, Rick Waters < > rick.wat...@gmail.com> wrote: > > > Wow! That's perfect! Thanks!!! > > On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler wrote: > > Ok Rick, > > This may not be exactly the manual but has tons of the info you need and > want. this what legacy sent me when I landed my big catch AKA the WoodChuck > Triple click or highlight the link right click once pick go too... and > there you go. hope it helps. > > https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf > > Let me know if you can open it. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sun, Feb 10, 2019 at 12:02 PM Rick Waters > wrote: > > OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), > and I haven't really touched it since I got it. Mostly because I had an > unheated garage as a workshop, and Chicago temps have been prohibitively > cold lately. > > I took 20 minutes this morning to take the crank handle Mike Pung sent me > (thanks Mike!) out and figure out how it goes on the machine. I had to > take off some giant washers, but figured it out. > > Then I started taking a bunch of parts off that were rust frozen, oiled > them up and got some of the surface rust off so they could move freely (to > some extent). > > Then I saw it... This machine is AWESOME! I'm still not sure about a lot > of things, but the possibilities are endless! I just wanted something to > make pool cues with, but this can do so much more! > > Yeah, I've seen the braiding and twist videos, flute routing and all > that. But when you see how configurable this is up close, your mind runs > wild! > > If anyone has a Woodchuck manual, or even an extra one, I'd be interested > it copying it. The company I own is a professional training company, and I > make training manuals all the time. I can make PDFs out of anything. So > if you want, I can make professional manuals that are out of print... Just > an offer. > > Thanks again to Mike Pung! > > Rick > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email
Re: Holy Smokes!
Hey Tim, My Pleasure. I am honestly glad I was able to contribute something that others will benefit from. I just happened to connect with the right person the day when I started my search. Now if a few guys save it to their computers and or a DVD or something. I printed it off of course too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Feb 11, 2019 at 12:36 AM Tim Krause wrote: > OMG, I can die now knowing the official woodchuck manual has been found. > Long mystified to be lost and never to be found again...at Legacy even!!! > Thanks for sharing this Tim, it honestly has been well over a 10 year > search. > > Tim > On Feb 10, 2019, at 6:50 PM, Tim Ziegler wrote: >> >> Ok Rick, >> >> This may not be exactly the manual but has tons of the info you need and >> want. this what legacy sent me when I landed my big catch AKA the WoodChuck >> Triple click or highlight the link right click once pick go too... and >> there you go. hope it helps. >> >> https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf >> >> Let me know if you can open it. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> >> wrote: >> >>> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 >>> months), and I haven't really touched it since I got it. Mostly because I >>> had an unheated garage as a workshop, and Chicago temps have been >>> prohibitively cold lately. >>> >>> I took 20 minutes this morning to take the crank handle Mike Pung sent >>> me (thanks Mike!) out and figure out how it goes on the machine. I had to >>> take off some giant washers, but figured it out. >>> >>> Then I started taking a bunch of parts off that were rust frozen, oiled >>> them up and got some of the surface rust off so they could move freely (to >>> some extent). >>> >>> Then I saw it... This machine is AWESOME! I'm still not sure about a >>> lot of things, but the possibilities are endless! I just wanted something >>> to make pool cues with, but this can do so much more! >>> >>> Yeah, I've seen the braiding and twist videos, flute routing and all >>> that. But when you see how configurable this is up close, your mind runs >>> wild! >>> >>> If anyone has a Woodchuck manual, or even an extra one, I'd be >>> interested it copying it. The company I own is a professional training >>> company, and I make training manuals all the time. I can make PDFs out of >>> anything. So if you want, I can make professional manuals that are out of >>> print... Just an offer. >>> >>> Thanks again to Mike Pung! >>> >>> Rick >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To post to this group, send email to >>> legacy-ornamental-mills@googlegroups.com. >>> Visit this group at >>> https://groups.google.com/group/legacy-ornamental-mills. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Holy Smokes!
I thought you might like that Tim K when you saw it I was waiting for you to chime in :-):-):-):-):-):-):-):-):-):-):-):-) Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Monday, 11 February 2019 5:36 PM:-):-):-):-) To: legacy-ornamental-mills@googlegroups.com Subject: Re: Holy Smokes! OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, at 6:50 PM, Tim Ziegler wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0 <https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf> &preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters < rick.wat...@gmail.com> wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you see how configurable this is up close, your mind runs wild! If anyone has a Woodchuck manual, or even an extra one, I'd be interested it copying it. The company I own is a professional training company, and I make training manuals all the time. I can make PDFs out of anything. So if you want, I can make professional manuals that are out of print... Just an offer. Thanks again to Mike Pung! Rick -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Holy Smokes!
OMG, I can die now knowing the official woodchuck manual has been found. Long mystified to be lost and never to be found again...at Legacy even!!! Thanks for sharing this Tim, it honestly has been well over a 10 year search. Tim On Feb 10, 2019, 6:50 PM, at 6:50 PM, Tim Ziegler wrote: >Ok Rick, > >This may not be exactly the manual but has tons of the info you need >and >want. this what legacy sent me when I landed my big catch AKA the >WoodChuck >Triple click or highlight the link right click once pick go too... and >there you go. hope it helps. >https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf > >Let me know if you can open it. >Kind Regards, > >Timothy J. Ziegler >Ziegler WoodWork & Specialty >14171 160th Ave. >Foreston MN 56330 > >320-294-5798 shop >320-630-2243 cell > > >On Sun, Feb 10, 2019 at 12:02 PM Rick Waters >wrote: > >> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 >months), >> and I haven't really touched it since I got it. Mostly because I had >an >> unheated garage as a workshop, and Chicago temps have been >prohibitively >> cold lately. >> >> I took 20 minutes this morning to take the crank handle Mike Pung >sent me >> (thanks Mike!) out and figure out how it goes on the machine. I had >to >> take off some giant washers, but figured it out. >> >> Then I started taking a bunch of parts off that were rust frozen, >oiled >> them up and got some of the surface rust off so they could move >freely (to >> some extent). >> >> Then I saw it... This machine is AWESOME! I'm still not sure about >a lot >> of things, but the possibilities are endless! I just wanted >something to >> make pool cues with, but this can do so much more! >> >> Yeah, I've seen the braiding and twist videos, flute routing and all >> that. But when you see how configurable this is up close, your mind >runs >> wild! >> >> If anyone has a Woodchuck manual, or even an extra one, I'd be >interested >> it copying it. The company I own is a professional training company, >and I >> make training manuals all the time. I can make PDFs out of anything. > So >> if you want, I can make professional manuals that are out of print... > Just >> an offer. >> >> Thanks again to Mike Pung! >> >> Rick >> >> -- >> You received this message because you are subscribed to the Google >Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, >send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To post to this group, send email to >legacy-ornamental-mills@googlegroups.com. >Visit this group at >https://groups.google.com/group/legacy-ornamental-mills. >For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Holy Smokes!
Hello RickWelcome to the OM world.(that is Ornamental Milling) I am glad that you can see the potential for your Wood Chuck. There are some pretty neat things you can do with your Ornamental mill.I cant wait to see what you come up with.Wishing you the best of luck. C.A.G. On Sunday, February 10, 2019, 10:03:02 PM EST, Rick Waters wrote: Wow! That's perfect! Thanks!!! On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler wrote: Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuckTriple click or highlight the link right click once pick go too... and there you go. hope it helps.https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters wrote: OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), and I haven't really touched it since I got it. Mostly because I had an unheated garage as a workshop, and Chicago temps have been prohibitively cold lately. I took 20 minutes this morning to take the crank handle Mike Pung sent me (thanks Mike!) out and figure out how it goes on the machine. I had to take off some giant washers, but figured it out. Then I started taking a bunch of parts off that were rust frozen, oiled them up and got some of the surface rust off so they could move freely (to some extent). Then I saw it... This machine is AWESOME! I'm still not sure about a lot of things, but the possibilities are endless! I just wanted something to make pool cues with, but this can do so much more! Yeah, I've seen the braiding and twist videos, flute routing and all that. But when you see how configurable this is up close, your mind runs wild! If anyone has a Woodchuck manual, or even an extra one, I'd be interested it copying it. The company I own is a professional training company, and I make training manuals all the time. I can make PDFs out of anything. So if you want, I can make professional manuals that are out of print... Just an offer. Thanks again to Mike Pung! Rick -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Holy Smokes!
Your very welcome. Enjoy and have a great evening young man. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 9:03 PM Rick Waters wrote: > Wow! That's perfect! Thanks!!! > > On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler wrote: > >> Ok Rick, >> >> This may not be exactly the manual but has tons of the info you need and >> want. this what legacy sent me when I landed my big catch AKA the WoodChuck >> Triple click or highlight the link right click once pick go too... and >> there you go. hope it helps. >> >> https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf >> >> Let me know if you can open it. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Sun, Feb 10, 2019 at 12:02 PM Rick Waters >> wrote: >> >>> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 >>> months), and I haven't really touched it since I got it. Mostly because I >>> had an unheated garage as a workshop, and Chicago temps have been >>> prohibitively cold lately. >>> >>> I took 20 minutes this morning to take the crank handle Mike Pung sent >>> me (thanks Mike!) out and figure out how it goes on the machine. I had to >>> take off some giant washers, but figured it out. >>> >>> Then I started taking a bunch of parts off that were rust frozen, oiled >>> them up and got some of the surface rust off so they could move freely (to >>> some extent). >>> >>> Then I saw it... This machine is AWESOME! I'm still not sure about a >>> lot of things, but the possibilities are endless! I just wanted something >>> to make pool cues with, but this can do so much more! >>> >>> Yeah, I've seen the braiding and twist videos, flute routing and all >>> that. But when you see how configurable this is up close, your mind runs >>> wild! >>> >>> If anyone has a Woodchuck manual, or even an extra one, I'd be >>> interested it copying it. The company I own is a professional training >>> company, and I make training manuals all the time. I can make PDFs out of >>> anything. So if you want, I can make professional manuals that are out of >>> print... Just an offer. >>> >>> Thanks again to Mike Pung! >>> >>> Rick >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To post to this group, send email to >>> legacy-ornamental-mills@googlegroups.com. >>> Visit this group at >>> https://groups.google.com/group/legacy-ornamental-mills. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Holy Smokes!
Wow! That's perfect! Thanks!!! On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler wrote: > Ok Rick, > > This may not be exactly the manual but has tons of the info you need and > want. this what legacy sent me when I landed my big catch AKA the WoodChuck > Triple click or highlight the link right click once pick go too... and > there you go. hope it helps. > > https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf > > Let me know if you can open it. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Sun, Feb 10, 2019 at 12:02 PM Rick Waters > wrote: > >> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 >> months), and I haven't really touched it since I got it. Mostly because I >> had an unheated garage as a workshop, and Chicago temps have been >> prohibitively cold lately. >> >> I took 20 minutes this morning to take the crank handle Mike Pung sent me >> (thanks Mike!) out and figure out how it goes on the machine. I had to >> take off some giant washers, but figured it out. >> >> Then I started taking a bunch of parts off that were rust frozen, oiled >> them up and got some of the surface rust off so they could move freely (to >> some extent). >> >> Then I saw it... This machine is AWESOME! I'm still not sure about a >> lot of things, but the possibilities are endless! I just wanted something >> to make pool cues with, but this can do so much more! >> >> Yeah, I've seen the braiding and twist videos, flute routing and all >> that. But when you see how configurable this is up close, your mind runs >> wild! >> >> If anyone has a Woodchuck manual, or even an extra one, I'd be interested >> it copying it. The company I own is a professional training company, and I >> make training manuals all the time. I can make PDFs out of anything. So >> if you want, I can make professional manuals that are out of print... Just >> an offer. >> >> Thanks again to Mike Pung! >> >> Rick >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To post to this group, send email to >> legacy-ornamental-mills@googlegroups.com. >> Visit this group at >> https://groups.google.com/group/legacy-ornamental-mills. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Holy Smokes!
Ok Rick, This may not be exactly the manual but has tons of the info you need and want. this what legacy sent me when I landed my big catch AKA the WoodChuck Triple click or highlight the link right click once pick go too... and there you go. hope it helps. https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0&preview=Woodchuck+IRT+manual.pdf Let me know if you can open it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters wrote: > OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), > and I haven't really touched it since I got it. Mostly because I had an > unheated garage as a workshop, and Chicago temps have been prohibitively > cold lately. > > I took 20 minutes this morning to take the crank handle Mike Pung sent me > (thanks Mike!) out and figure out how it goes on the machine. I had to > take off some giant washers, but figured it out. > > Then I started taking a bunch of parts off that were rust frozen, oiled > them up and got some of the surface rust off so they could move freely (to > some extent). > > Then I saw it... This machine is AWESOME! I'm still not sure about a lot > of things, but the possibilities are endless! I just wanted something to > make pool cues with, but this can do so much more! > > Yeah, I've seen the braiding and twist videos, flute routing and all > that. But when you see how configurable this is up close, your mind runs > wild! > > If anyone has a Woodchuck manual, or even an extra one, I'd be interested > it copying it. The company I own is a professional training company, and I > make training manuals all the time. I can make PDFs out of anything. So > if you want, I can make professional manuals that are out of print... Just > an offer. > > Thanks again to Mike Pung! > > Rick > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Holy Smokes!
I might have a PDF copy Legacy sent me when I got my Wood Chuck Let me ck. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 10, 2019 at 12:02 PM Rick Waters wrote: > OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months), > and I haven't really touched it since I got it. Mostly because I had an > unheated garage as a workshop, and Chicago temps have been prohibitively > cold lately. > > I took 20 minutes this morning to take the crank handle Mike Pung sent me > (thanks Mike!) out and figure out how it goes on the machine. I had to > take off some giant washers, but figured it out. > > Then I started taking a bunch of parts off that were rust frozen, oiled > them up and got some of the surface rust off so they could move freely (to > some extent). > > Then I saw it... This machine is AWESOME! I'm still not sure about a lot > of things, but the possibilities are endless! I just wanted something to > make pool cues with, but this can do so much more! > > Yeah, I've seen the braiding and twist videos, flute routing and all > that. But when you see how configurable this is up close, your mind runs > wild! > > If anyone has a Woodchuck manual, or even an extra one, I'd be interested > it copying it. The company I own is a professional training company, and I > make training manuals all the time. I can make PDFs out of anything. So > if you want, I can make professional manuals that are out of print... Just > an offer. > > Thanks again to Mike Pung! > > Rick > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.