subject:"Wood Chuck usage"

Re: Wood Chuck usage

2023-02-15 Thread Tim Ziegler

Thats what I thought. But now I may have to buy another Chuck as that
machine is in another building lol.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Feb 15, 2023 at 9:50 AM  wrote:

> Great
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 February 2023 10:40 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Thanks Bill. lot more confident with this method too.
>
> Plus the bonus, I have now figured out how to install a chuck on my
> WoodChuck.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Feb 14, 2023 at 10:40 PM  wrote:
>
> That look really good now Tim great job
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 February 2023 2:01 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Ok after some excellent advice from Bill, I did some more testing tonight
> and come up with this
>
> for now which is much more accurate then what I was originally doing.
>
> Any other input of thoughts?
>
> I am working on setting up the put a decorative look on some duck, goose,
> turkey, deer etc... calls.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Feb 14, 2023 at 7:50 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> ;-P.  Poor Bill!
>
>
>
> C.A.G.
>
>
>
> On Tuesday, February 14, 2023 at 08:47:36 AM EST, 
> wrote:
>
>
>
>
>
> Oh ok sus it out from me I get it
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 11:47 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Get idea's, use input to add to what I am already doing.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 10:19 PM  wrote:
>
> gleen off of 
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Thanks Bill,
>
>
>
> Yeah thanks for the advice on how to hold them. I will need more
> information from you on that as I was
>
> having a lot of trouble getting it square. so maybe you can share some
> pics of your thoughts for me to gleen off of lol.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 9:43 PM  wrote:
>
> Rotary cross slide brilliant that exactly the way I would have gone that’s
> why we own these right Tim 😉 ,perhaps next time double side tape a
> spigot and chuck it instead of the dogs and hub and start in the middle
> with the groove and go back and forward might work just a thought .
>
> But you found a use for our rotary cross slides apart from square spirals
> great and even so nice job buddy
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:11 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Wood Chuck usage
>
>
>
> I am doing some tests for a customer and needed to figure out a way of
> putting
>
> grooves in at an angle. So I set up my Wood Chuck with the Angl

RE: Wood Chuck usage

2023-02-15 Thread bulkeley

Great 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, 15 February 2023 10:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

 

Thanks Bill. lot more confident with this method too. 

Plus the bonus, I have now figured out how to install a chuck on my WoodChuck.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Feb 14, 2023 at 10:40 PM mailto:bulke...@mmnet.com.au> > wrote:

That look really good now Tim great job 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Wednesday, 15 February 2023 2:01 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Ok after some excellent advice from Bill, I did some more testing tonight and 
come up with this 

for now which is much more accurate then what I was originally doing. 

Any other input of thoughts? 

I am working on setting up the put a decorative look on some duck, goose, 
turkey, deer etc... calls. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Feb 14, 2023 at 7:50 AM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

;-P.  Poor Bill! 

 

C.A.G.

 

On Tuesday, February 14, 2023 at 08:47:36 AM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Oh ok sus it out from me I get it 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 11:47 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Get idea's, use input to add to what I am already doing. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 10:19 PM mailto:bulke...@mmnet.com.au> > wrote:

gleen off of 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Thanks Bill,

 

Yeah thanks for the advice on how to hold them. I will need more information 
from you on that as I was

having a lot of trouble getting it square. so maybe you can share some pics of 
your thoughts for me to gleen off of lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 9:43 PM mailto:bulke...@mmnet.com.au> > wrote:

Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legac

Re: Wood Chuck usage

2023-02-15 Thread Tim Ziegler

Thanks Bill. lot more confident with this method too.
Plus the bonus, I have now figured out how to install a chuck on my
WoodChuck.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 14, 2023 at 10:40 PM  wrote:

> That look really good now Tim great job
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 February 2023 2:01 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Ok after some excellent advice from Bill, I did some more testing tonight
> and come up with this
>
> for now which is much more accurate then what I was originally doing.
>
> Any other input of thoughts?
>
> I am working on setting up the put a decorative look on some duck, goose,
> turkey, deer etc... calls.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Feb 14, 2023 at 7:50 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> ;-P.  Poor Bill!
>
>
>
> C.A.G.
>
>
>
> On Tuesday, February 14, 2023 at 08:47:36 AM EST, 
> wrote:
>
>
>
>
>
> Oh ok sus it out from me I get it
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 11:47 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Get idea's, use input to add to what I am already doing.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 10:19 PM  wrote:
>
> gleen off of 
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Thanks Bill,
>
>
>
> Yeah thanks for the advice on how to hold them. I will need more
> information from you on that as I was
>
> having a lot of trouble getting it square. so maybe you can share some
> pics of your thoughts for me to gleen off of lol.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 9:43 PM  wrote:
>
> Rotary cross slide brilliant that exactly the way I would have gone that’s
> why we own these right Tim 😉 ,perhaps next time double side tape a
> spigot and chuck it instead of the dogs and hub and start in the middle
> with the groove and go back and forward might work just a thought .
>
> But you found a use for our rotary cross slides apart from square spirals
> great and even so nice job buddy
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:11 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Wood Chuck usage
>
>
>
> I am doing some tests for a customer and needed to figure out a way of
> putting
>
> grooves in at an angle. So I set up my Wood Chuck with the Angle Table and
> thought nowhere near perfect here is what I came up with. Using a #40
> indexing plate on a 4.25 diameter piece of Red Oak.
>
> Along with that I used a  3 flute veining style bit.
>
> It does appear that the dogs do not match the old version of the Hub I
> have on it. But overall my Customer was excited.
>
> Thoughts feed back?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe f

RE: Wood Chuck usage

2023-02-14 Thread bulkeley

That look really good now Tim great job 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, 15 February 2023 2:01 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

 

Ok after some excellent advice from Bill, I did some more testing tonight and 
come up with this 

for now which is much more accurate then what I was originally doing. 

Any other input of thoughts? 

I am working on setting up the put a decorative look on some duck, goose, 
turkey, deer etc... calls. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Feb 14, 2023 at 7:50 AM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

;-P.  Poor Bill! 

 

C.A.G.

 

On Tuesday, February 14, 2023 at 08:47:36 AM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Oh ok sus it out from me I get it 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 11:47 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Get idea's, use input to add to what I am already doing. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 10:19 PM mailto:bulke...@mmnet.com.au> > wrote:

gleen off of 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Thanks Bill,

 

Yeah thanks for the advice on how to hold them. I will need more information 
from you on that as I was

having a lot of trouble getting it square. so maybe you can share some pics of 
your thoughts for me to gleen off of lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 9:43 PM mailto:bulke...@mmnet.com.au> > wrote:

Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the

Re: Wood Chuck usage

2023-02-14 Thread Tim Ziegler

lol ok
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Feb 14, 2023 at 7:47 AM  wrote:

> Oh ok sus it out from me I get it
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 11:47 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Get idea's, use input to add to what I am already doing.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 10:19 PM  wrote:
>
> gleen off of 
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Thanks Bill,
>
>
>
> Yeah thanks for the advice on how to hold them. I will need more
> information from you on that as I was
>
> having a lot of trouble getting it square. so maybe you can share some
> pics of your thoughts for me to gleen off of lol.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 9:43 PM  wrote:
>
> Rotary cross slide brilliant that exactly the way I would have gone that’s
> why we own these right Tim 😉 ,perhaps next time double side tape a
> spigot and chuck it instead of the dogs and hub and start in the middle
> with the groove and go back and forward might work just a thought .
>
> But you found a use for our rotary cross slides apart from square spirals
> great and even so nice job buddy
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:11 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Wood Chuck usage
>
>
>
> I am doing some tests for a customer and needed to figure out a way of
> putting
>
> grooves in at an angle. So I set up my Wood Chuck with the Angle Table and
> thought nowhere near perfect here is what I came up with. Using a #40
> indexing plate on a 4.25 diameter piece of Red Oak.
>
> Along with that I used a  3 flute veining style bit.
>
> It does appear that the dogs do not match the old version of the Hub I
> have on it. But overall my Customer was excited.
>
> Thoughts feed back?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view thi

Re: Wood Chuck usage

2023-02-14 Thread 'Curt George' via Legacy Ornamental Mills

 ;-P.  Poor Bill! 
C.A.G.
On Tuesday, February 14, 2023 at 08:47:36 AM EST,  
wrote:  
 
 
Oh ok sus it out from me I get it 

  

Bill

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 11:47 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

  

Get idea's, use input to add to what I am already doing. 




Kind Regards,

  

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

  

320-294-5798 shop

320-630-2243 cell

  

  

On Mon, Feb 13, 2023 at 10:19 PM  wrote:


gleen off of 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

 

Thanks Bill,

 

Yeah thanks for the advice on how to hold them. I will need more information 
from you on that as I was

having a lot of trouble getting it square. so maybe you can share some pics of 
your thoughts for me to gleen off of lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 9:43 PM  wrote:


Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group ; Tim Ziegler 

Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002e01d9402b%248c061300%24a4123900%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG5HwwP%2Bmg41EjJUOyJhm7g8P6bKuEB4YQDurJw9J%3DpbQ%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mil

RE: Wood Chuck usage

2023-02-14 Thread bulkeley

Oh ok sus it out from me I get it 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 11:47 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

 

Get idea's, use input to add to what I am already doing. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 10:19 PM mailto:bulke...@mmnet.com.au> > wrote:

gleen off of 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Thanks Bill,

 

Yeah thanks for the advice on how to hold them. I will need more information 
from you on that as I was

having a lot of trouble getting it square. so maybe you can share some pics of 
your thoughts for me to gleen off of lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 9:43 PM mailto:bulke...@mmnet.com.au> > wrote:

Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To u

RE: Wood Chuck usage

2023-02-14 Thread bulkeley

Thank you jeff different cultures there I guess lol we say sus it out from you

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jeff Richmond
Sent: Tuesday, 14 February 2023 10:27 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

 

“Learn” off of

 

Jeff from Connecticut 
Sent from my iPhone





On Feb 13, 2023, at 11:19 PM, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  wrote:



gleen off of 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:48 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Wood Chuck usage

 

Thanks Bill,

 

Yeah thanks for the advice on how to hold them. I will need more information 
from you on that as I was

having a lot of trouble getting it square. so maybe you can share some pics of 
your thoughts for me to gleen off of lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 9:43 PM mailto:bulke...@mmnet.com.au> > wrote:

Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-o

Re: Wood Chuck usage

2023-02-14 Thread Tim Ziegler

Get idea's, use input to add to what I am already doing.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 13, 2023 at 10:19 PM  wrote:

> gleen off of 
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:48 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Wood Chuck usage
>
>
>
> Thanks Bill,
>
>
>
> Yeah thanks for the advice on how to hold them. I will need more
> information from you on that as I was
>
> having a lot of trouble getting it square. so maybe you can share some
> pics of your thoughts for me to gleen off of lol.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Feb 13, 2023 at 9:43 PM  wrote:
>
> Rotary cross slide brilliant that exactly the way I would have gone that’s
> why we own these right Tim 😉 ,perhaps next time double side tape a
> spigot and chuck it instead of the dogs and hub and start in the middle
> with the groove and go back and forward might work just a thought .
>
> But you found a use for our rotary cross slides apart from square spirals
> great and even so nice job buddy
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:11 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Wood Chuck usage
>
>
>
> I am doing some tests for a customer and needed to figure out a way of
> putting
>
> grooves in at an angle. So I set up my Wood Chuck with the Angle Table and
> thought nowhere near perfect here is what I came up with. Using a #40
> indexing plate on a 4.25 diameter piece of Red Oak.
>
> Along with that I used a  3 flute veining style bit.
>
> It does appear that the dogs do not match the old version of the Hub I
> have on it. But overall my Customer was excited.
>
> Thoughts feed back?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit

Re: Wood Chuck usage

2023-02-14 Thread Jeff Richmond

“Learn” off ofJeff from Connecticut Sent from my iPhoneOn Feb 13, 2023, at 11:19 PM, bulke...@mmnet.com.au wrote:gleen off of  From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Tuesday, 14 February 2023 2:48 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Wood Chuck usage Thanks Bill, Yeah thanks for the advice on how to hold them. I will need more information from you on that as I washaving a lot of trouble getting it square. so maybe you can share some pics of your thoughts for me to gleen off of lol. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Mon, Feb 13, 2023 at 9:43 PM <bulke...@mmnet.com.au> wrote:Rotary cross slide brilliant that exactly the way I would have gone that’s why we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck it instead of the dogs and hub and start in the middle with the groove and go back and forward might work just a thought .But you found a use for our rotary cross slides apart from square spirals great and even so nice job buddy Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Tuesday, 14 February 2023 2:11 PMTo: LOM Group <legacy-ornamental-mills@googlegroups.com>; Tim Ziegler <timjzieg...@gmail.com>Subject: Wood Chuck usage I am doing some tests for a customer and needed to figure out a way of putting grooves in at an angle. So I set up my Wood Chuck with the Angle Table and thought nowhere near perfect here is what I came up with. Using a #40 indexing plate on a 4.25 diameter piece of Red Oak. Along with that I used a  3 flute veining style bit. It does appear that the dogs do not match the old version of the Hub I have on it. But overall my Customer was excited. Thoughts feed back? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/002e01d9402b%248c061300%24a4123900%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0F13E002-F812-4028-BA92-59648B1F9474%40gmail.com.

Nice Job Tim 👍Jeff from Connecticut Sent from my iPhoneOn Feb 13, 2023, at 10:11 PM, Tim Ziegler wrote:I am doing some tests for a customer and needed to figure out a way of putting grooves in at an angle. So I set up my Wood Chuck with the Angle Table and thought nowhere near perfect here is what I came up with. Using a #40 indexing plate on a 4.25 diameter piece of Red Oak. Along with that I used a 3 flute veining style bit. It does appear that the dogs do not match the old version of the Hub I have on it. But overall my Customer was excited. Thoughts feed back? Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com.
<5 WC.jpg><4 WC.jpg><6 WC.jpg><3 WC.jpg><2 WC.jpg><1 WC.jpg>

RE: Wood Chuck usage

2023-02-13 Thread bulkeley

gleen off of 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:48 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Wood Chuck usage

 

Thanks Bill,

 

Yeah thanks for the advice on how to hold them. I will need more information 
from you on that as I was

having a lot of trouble getting it square. so maybe you can share some pics of 
your thoughts for me to gleen off of lol. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Feb 13, 2023 at 9:43 PM mailto:bulke...@mmnet.com.au> > wrote:

Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002e01d9402b%248c061300%24a4123900%24%40mmnet.com.au.

Re: Wood Chuck usage

2023-02-13 Thread Tim Ziegler

Thanks Bill,

Yeah thanks for the advice on how to hold them. I will need more
information from you on that as I was
having a lot of trouble getting it square. so maybe you can share some pics
of your thoughts for me to gleen off of lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 13, 2023 at 9:43 PM  wrote:

> Rotary cross slide brilliant that exactly the way I would have gone that’s
> why we own these right Tim 😉 ,perhaps next time double side tape a
> spigot and chuck it instead of the dogs and hub and start in the middle
> with the groove and go back and forward might work just a thought .
>
> But you found a use for our rotary cross slides apart from square spirals
> great and even so nice job buddy
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 14 February 2023 2:11 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Wood Chuck usage
>
>
>
> I am doing some tests for a customer and needed to figure out a way of
> putting
>
> grooves in at an angle. So I set up my Wood Chuck with the Angle Table and
> thought nowhere near perfect here is what I came up with. Using a #40
> indexing plate on a 4.25 diameter piece of Red Oak.
>
> Along with that I used a  3 flute veining style bit.
>
> It does appear that the dogs do not match the old version of the Hub I
> have on it. But overall my Customer was excited.
>
> Thoughts feed back?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLExK90RDbDLvtRPvdG5dCX35%3Df6RV6avmk%2BWCqRge9bng%40mail.gmail.com.

Re: Wood Chuck usage

2023-02-13 Thread 'Curt George' via Legacy Ornamental Mills

Pretty Slick Tim.I know you collecting all those Legacy part would pay off one
day. ;-)
Very Nice.
C.A.G.
On Monday, February 13, 2023 at 10:11:17 PM EST, Tim Ziegler
wrote:

I am doing some tests for a customer and needed to figure out a way of putting
grooves in at an angle. So I set up my Wood Chuck with the Angle Table and
thought nowhere near perfect here is what I came up with. Using a #40 indexing
plate on a 4.25 diameter piece of Red Oak. Along with that I used a 3 flute
veining style bit. It does appear that the dogs do not match the old version of
the Hub I have on it. But overall my Customer was excited. Thoughts feed
back?
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/851603262.737700.1676344616727%40mail.yahoo.com.

Re: Wood Chuck usage

2023-02-13 Thread Tim Ziegler

Yeah and I am super glad I have the Wood Chuck with all the bells and
whistles on it.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Feb 13, 2023 at 9:17 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Pretty Slick Tim.
> I know you collecting all those Legacy part would pay off one day. ;-)
>
> Very Nice.
>
> C.A.G.
>
> On Monday, February 13, 2023 at 10:11:17 PM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> I am doing some tests for a customer and needed to figure out a way of
> putting
> grooves in at an angle. So I set up my Wood Chuck with the Angle Table and
> thought nowhere near perfect here is what I came up with. Using a #40
> indexing plate on a 4.25 diameter piece of Red Oak.
> Along with that I used a  3 flute veining style bit.
> It does appear that the dogs do not match the old version of the Hub I
> have on it. But overall my Customer was excited.
> Thoughts feed back?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/851603262.737700.1676344616727%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEajg8_OaeqVR6uHNTrVyyh-SLwz_Frr4qvz%2BBkzYyHGA%40mail.gmail.com.

RE: Wood Chuck usage

2023-02-13 Thread bulkeley

Rotary cross slide brilliant that exactly the way I would have gone that’s why 
we own these right Tim 😉 ,perhaps next time double side tape a spigot and chuck 
it instead of the dogs and hub and start in the middle with the groove and go 
back and forward might work just a thought .

But you found a use for our rotary cross slides apart from square spirals great 
and even so nice job buddy

 

Bill

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 14 February 2023 2:11 PM
To: LOM Group ; Tim Ziegler 

Subject: Wood Chuck usage

 

I am doing some tests for a customer and needed to figure out a way of putting 

grooves in at an angle. So I set up my Wood Chuck with the Angle Table and 
thought nowhere near perfect here is what I came up with. Using a #40 indexing 
plate on a 4.25 diameter piece of Red Oak. 

Along with that I used a  3 flute veining style bit. 

It does appear that the dogs do not match the old version of the Hub I have on 
it. But overall my Customer was excited. 

Thoughts feed back? 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFv3YkDSc33x%2B8g7jQAPb9AxSPahVmbnhsem4ANCrHSsw%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d94026%2487554e70%2495ffeb50%24%40mmnet.com.au.

Re: Wood Chuck usage

RE: Wood Chuck usage

Re: Wood Chuck usage

RE: Wood Chuck usage

Re: Wood Chuck usage

Re: Wood Chuck usage

RE: Wood Chuck usage

RE: Wood Chuck usage

Re: Wood Chuck usage

Re: Wood Chuck usage

Re: Wood Chuck usage

RE: Wood Chuck usage

Re: Wood Chuck usage

Re: Wood Chuck usage

Re: Wood Chuck usage

RE: Wood Chuck usage

16 matches

Site Navigation

Mail list logo

Footer information