Re: candy dish
I have not tried/used that "new" 3M sanding product - so, like Tim, I can't comment on it.As for 3M products in general, I have always found their products to be of very good to excellent quality and function (meaning they do what they are intended to do.) I have contacted their Customer Service in the past with questions (and an "issue" one time). In ALL cases, I was IMPRESSED with the Customer Service Representative's answering my questions and addressing my concerns.Mac-Original Message- From: Tim Krause <artmarb...@comcast.net> Sent: Aug 14, 2016 2:33 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish <zzz!--[if !mso]=""> <zzz![endif]--> <zzz!--[if gte="" mso="" 9]=""> <zzz![endif]--><zzz!--[if gte="" mso="" 9]=""> <zzz![endif]--> I like Klingspor, the gold kind. It's available in clothback as well. As for 3M, I can't comment. -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, August 13, 2016 11:44 PM Subject: RE: candy dish Ok now we all have the name what do you all think about the sandpaper any good or not? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWFSent: Saturday, 13 August 2016 11:41 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: candy dish BINGO!!! You win "The Prize"! Here it is: (It is 5 Gold Stars.)I'll bet you are either of "The Greatest Generation" or a "Baby Boomer".I don't think that the Gen-Xer's or Millenials have any idea about the background of the company. '3M' is certainly easier to "spell".Mac -Original Message- From: MAX LATHAM Sent: Aug 13, 2016 7:09 AM To: "legacy-ornamental-mills@googlegroups.com" Subject: Re: candy dish Minnesota Mining and Manufacturing From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> on behalf of MWF <mwfos...@earthlink.net>Sent: Saturday, August 13, 2016 12:20 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: candy dish Bill,Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"?Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!)Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?)Mac -Original Message- From: Bill Bulkeley Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill BulkeleySent: Saturday, 13 August 2016 8:15 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY 3M Pro Grade Precision Ultra Flexible Sanding Sheets www.youtube.com Get your hands on these ultra flexible sanding sheets. Learn how they can fold, roll, shape or twist! Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim KrauseSent: Saturday, 13 August 2016 3:43 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had
Re: candy dish
I like Klingspor, the gold kind. It's available in clothback as well. As for 3M, I can't comment. -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, August 13, 2016 11:44 PM Subject: RE: candy dish Ok now we all have the name what do you all think about the sandpaper any good or not? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF Sent: Saturday, 13 August 2016 11:41 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish BINGO!!! You win "The Prize"! Here it is:(It is 5 Gold Stars.) I'll bet you are either of "The Greatest Generation" or a "Baby Boomer". I don't think that the Gen-Xer's or Millenials have any idea about the background of the company. '3M' is certainly easier to "spell". Mac -- -Original Message- From: MAX LATHAM Sent: Aug 13, 2016 7:09 AM To: "legacy-ornamental-mills@googlegroups.com" Subject: Re: candy dish Minnesota Mining and Manufacturing From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> on behalf of MWF <mwfos...@earthlink.net> Sent: Saturday, August 13, 2016 12:20 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Bill, Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"? Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!) Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?) Mac -Original Message- From: Bill Bulkeley Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY 3M Pro Grade Precision Ultra Flexible Sanding Sheets www.youtube.com Get your hands on these ultra flexible sanding sheets. Learn how they can fold, roll, shape or twist! Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland To: Legacy Ornamental Mills Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I wo
RE: candy dish
Ok now we all have the name what do you all think about the sandpaper any good or not? Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF Sent: Saturday, 13 August 2016 11:41 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish BINGO!!! You win "The Prize"! Here it is:(It is 5 Gold Stars.) I'll bet you are either of "The Greatest Generation" or a "Baby Boomer". I don't think that the Gen-Xer's or Millenials have any idea about the background of the company. '3M' is certainly easier to "spell". Mac _ -Original Message- From: MAX LATHAM Sent: Aug 13, 2016 7:09 AM To: "legacy-ornamental-mills@googlegroups.com" Subject: Re: candy dish Minnesota Mining and Manufacturing _ From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> on behalf of MWF <mwfos...@earthlink.net> Sent: Saturday, August 13, 2016 12:20 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Bill, Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"? Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!) Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?) Mac _ _ -Original Message----- From: Bill Bulkeley Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY <https://www.youtube.com/watch?v=BmOYBlaIuBY> <https://www.youtube.com/watch?v=BmOYBlaIuBY> 3M Pro Grade Precision Ultra Flexible Sanding Sheets www.youtube.com Get your hands on these ultra flexible sanding sheets. Learn how they can fold, roll, shape or twist! Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland <mailto:dexterbl...@gmail.com> To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strip
Re: candy dish
BINGO!!! You win "The Prize"! Here it is: (It is 5 Gold Stars.)I'll bet you are either of "The Greatest Generation" or a "Baby Boomer".I don't think that the Gen-Xer's or Millenials have any idea about the background of the company. '3M' is certainly easier to "spell".Mac-Original Message- From: MAX LATHAM <ma...@hotmail.com> Sent: Aug 13, 2016 7:09 AM To: "legacy-ornamental-mills@googlegroups.com" <legacy-ornamental-mills@googlegroups.com> Subject: Re: candy dish Minnesota Mining and Manufacturing From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> on behalf of MWF <mwfos...@earthlink.net> Sent: Saturday, August 13, 2016 12:20 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Bill, Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"? Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!) Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?) Mac -----Original Message- From: Bill Bulkeley Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY 3M Pro Grade Precision Ultra Flexible Sanding Sheets www.youtube.com Get your hands on these ultra flexible sanding sheets. Learn how they can fold, roll, shape or twist! Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland To: Legacy Ornamental Mills Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamen
Re: candy dish
Minnesota Mining and Manufacturing From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> on behalf of MWF <mwfos...@earthlink.net> Sent: Saturday, August 13, 2016 12:20 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Bill, Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"? Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!) Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?) Mac -Original Message- From: Bill Bulkeley Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY [https://www.bing.com/th?id=OVP.Vfeba9dd7dfc0c91280bd9ebf3326e974=Api]<https://www.youtube.com/watch?v=BmOYBlaIuBY> 3M Pro Grade Precision Ultra Flexible Sanding Sheets<https://www.youtube.com/watch?v=BmOYBlaIuBY> www.youtube.com Get your hands on these ultra flexible sanding sheets. Learn how they can fold, roll, shape or twist! Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland<mailto:dexterbl...@gmail.com> To: Legacy Ornamental Mills<mailto:legacy-ornamental-mills@googlegroups.com> Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legac
RE: candy dish
No its generally always can’t get it here. I usually have more mail from overseas come to me than from my own country. This thing looks good especially rolling it or twisting it for doing the shoe shine buff of mikes on a hollow spiral. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF Sent: Saturday, 13 August 2016 3:20 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Bill, Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"? Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!) Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?) Mac _ _ -Original Message- From: Bill Bulkeley Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland <mailto:dexterbl...@gmail.com> To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. Tim No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4647/12799 - Release Date: 08/12/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegrou
RE: candy dish
Bill,Thanks for the clarification. After reading your post, I thought "Does he mean to say he Can or Cannot get it "Down Under"?Watching the advert., I thought "This ad seems to be geared towards "Amer-glish" vs "Aus-glish" or "NY-glish" for Joe). (Are those "words"? They are now!)Thanks for sharing the info about that 3M product. (By the way - do any of ya'll know what the 3M stands for/used to be?)Mac-Original Message- From: Bill Bulkeley <bulke...@mmnet.com.au> Sent: Aug 12, 2016 7:14 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish <zzz!--[if gte="" mso="" 9]=""> <zzz![endif]--><zzz!--[if gte="" mso="" 9]=""> <zzz![endif]--> Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland To: Legacy Ornamental Mills Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Curtis it is made of walnut there are 6 spindles but made 8 used the best 6. Aussiman don't remember pitch bit was a1" barley hollowed with 3/8 straight. Turned the part the bowl sits on on a J line lathe. when I went to glue up the base could not find my band clamp late at night and on a deadline , took a piece of a 2"ratchet strap screwed it on the jaws of a handscrew clamp instant band clamp .Sanded them with strips of sandpaper finish is rattlecan poly semi gloss On Tuesday, August 9, 2016 at 11:02:31 PM UTC-4, Stan Eichelberger wrote: > > candy dish made for Mansfield State Prison honor guard to thank the > furnual home where they practice. Spindles made on 900 mill > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: candy dish
Correction i have not seen them here in Australia Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, 13 August 2016 8:15 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: candy dish How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter <mailto:dexterbl...@gmail.com> Bland To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4647/12797 - Release Date: 08/12/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4647/12797 - Release Date: 08/12/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send emai
RE: candy dish
How about these for sanding hollow spirals as usual i have seen them here down under https://www.youtube.com/watch?v=BmOYBlaIuBY Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Saturday, 13 August 2016 3:43 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter <mailto:dexterbl...@gmail.com> Bland To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4647/12797 - Release Date: 08/12/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
I remember Tracy's sales pitch at the wood shows. He would say making a hollow twist in his high school class was the biggest challenge and now he can make them in no time on the legacy. The shoe shine method was the only way I could see it being done. Regarding Stuart's methods, they seem to be the one I learned in shop and in fine woodworking articles. It's tedious work. He came to our woodturning club but I had others that thought they where more important. It's something I do regret. I don't know if I'm too inspired to try making some, but I guess my life with Legacy won't be complete until I've made one or two :-) Thanks for all the input. -Tim - Original Message - From: Dexter Bland To: Legacy Ornamental Mills Sent: Friday, August 12, 2016 8:48 AM Subject: Re: candy dish Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Yes, Tim there is lots of sanding on doing spirals. Due to cutting into a cylinder, you are exposing a lot of end grain that is not easy to get smooth. A good sharp router bit is best to start with as smooth a cut as possible. Most of the spiral turnings that I have done were before I added a motor so I just sit in a chair and sanded all by hand. With the wood being Walnut, that makes the sanding even more difficult because that is a pretty "hard" wood. I have resisted getting a sanding mop since it is something I would not use that often and the sandpaper you use on it could not be used on any of the other sanders I already have. I already own about 6 other kind of sanders. OK Mike gives the most practical suggestion of using strips of sandpaper to "shoeshine" the turning while it is still slowing turning on the machine. Sanding is the most un-fun part of woodworking, but a bad job will show like wart on your nose when finish is applied. On Thursday, August 11, 2016 at 8:40:55 PM UTC-5, Tim wrote: > > Good comment Dexter, > > I'm going to admit something as your fearless leader, I've never done a > spiral! Is there a lot of sanding involved when doing a twist? I'm > guessing the quickest way would be to use some cloth backed sandpaper > strips and go up the grits. Can anyone please share some experience here. > > -Tim > > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: candy dish
Regarding Stuart Mortimer: Have had the fortune of seeing Stuart demonstrate in person many times over the years the last in Provo, Utah Craft Supplies show in 2012; his work inspired me to emulate several of his spiral turnings and then buy a 1200 Legacy myself some 14 years ago in an attempt to short cut the process which there is no substitute for that kind of skill. He is a master at the very pinnacle of the craft and I would say that Legacy owes their beginnings to him. Interesting tidbit about Stewart, he is a former constable with very large and strong hands but a master of finesses. Cheers, Michael Kratky From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bawdsey 64 Sent: Friday, August 12, 2016 6:55 AM To: Tim Krause; Legacy-Ornamental-Mills Subject: Re: candy dish Hi Tim You don't need a Legacy for making a Hollow Spiral just take a look at Stuart Mortimer who believe me is a genius at this https://www.youtube.com/watch?v=XDD0ZQzPNt8 Also watch this video by Stuart https://www.youtube.com/watch?v=V5kKJpR9xSI He does have a Legacy 1200 and I know as I sold it to him a good few years ago. He basically marks up the piece of timber then gets to work using an ArborTech followed by rasps and very long twists of various grade sandpaper. I am lucky enough to belong to the Stuart Mortimer Woodturning Club and so I have seen him in action and see his marvellous work every month when the club meets. Enjoy Roger From: Tim Krause Received: 12/08/2016 02:45:24 +01:00 To: legacy-ornamental-mills@googlegroups.com Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim - Original Message - From: Dexter Bland <mailto:dexterbl...@gmail.com> To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> Sent: Thursday, August 11, 2016 8:09 AM Subject: Re: candy dish Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Hi Tim You don't need a Legacy for making a Hollow Spiral just take a look at Stuart Mortimer who believe me is a genius at this https://www.youtube.com/watch?v=XDD0ZQzPNt8 [https://www.youtube.com/watch?v=XDD0ZQzPNt8] Also watch this video by Stuart https://www.youtube.com/watch?v=V5kKJpR9xSI [https://www.youtube.com/watch?v=V5kKJpR9xSI] He does have a Legacy 1200 and I know as I sold it to him a good few years ago. He basically marks up the piece of timber then gets to work using an ArborTech followed by rasps and very long twists of various grade sandpaper. I am lucky enough to belong to the Stuart Mortimer Woodturning Club and so I have seen him in action and see his marvellous work every month when the club meets. Enjoy Roger From: Tim Krause Received: 12/08/2016 02:45:24 +01:00 To: legacy-ornamental-mills@googlegroups.com Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim - Original Message - From: Dexter Bland [mailto:dexterbl...@gmail.com] To: Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Thursday, August 11, 2016 8:09 AM Subject: Re: candy dish Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com [mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com]. To post to this group, send email to legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com]. Visit this group at https://groups.google.com/group/legacy-ornamental-mills [https://groups.google.com/group/legacy-ornamental-mills]. For more options, visit https://groups.google.com/d/optout [https://groups.google.com/d/optout]. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: candy dish
I use strips of cloth back sand paper too to shape it then sanding mops and small flap sanders in a dermal and some times buffs to polish. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 12 August 2016 11:45 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: candy dish Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim - Original Message - From: Dexter <mailto:dexterbl...@gmail.com> Bland To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> Sent: Thursday, August 11, 2016 8:09 AM Subject: Re: candy dish Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4633/12794 - Release Date: 08/11/16 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Leave it chucked in and start it moving on a slow rotation Use a section of sandpaper cut in 1/2" strips. I use 20" strips of shop roll, 80 grit to start. pass it around the twist and do a shoe shine buff on it you will be able to handle the inside as well as the outside by passing the paper all the way through the hollow and out the other side. Then it's up in grit and finish as needed. Mike OK On 8/11/2016 8:45 PM, Tim Krause wrote: Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim - Original Message - *From:* Dexter Bland <mailto:dexterbl...@gmail.com> *To:* Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> *Sent:* Thursday, August 11, 2016 8:09 AM *Subject:* Re: candy dish Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Hey There Tim That's exactly what Ive done in the past. I sand the outer edges pretty much the normal way, on the lathe or Legacy, then I take sand cloth (I like the mesh type, It sorta looks like door screen, and come in roles, 3/4"-1" wide. with a wide range of grits. ) and sand the inside edges with the spindle locked in place, until the cut out looks like a round spindle. There is a lot of sanding to do, but its the best way that I know to get it done. I would think that those hollow spindles being small, something like 3/8" opening and small /short length, would be easier to do than something big. (but I could be wrong.) I've not tried anything this small on me 1000ex. I would like to know more about this candy dish. Please keep the commentary going... ;-) C.A.G. - Original Message - From: "Tim Krause" <artmarb...@comcast.net> To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, August 11, 2016 9:45:24 PM Subject: Re: candy dish Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim - Original Message - From: Dexter Bland To: Legacy Ornamental Mills Sent: Thursday, August 11, 2016 8:09 AM Subject: Re: candy dish Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Good comment Dexter, I'm going to admit something as your fearless leader, I've never done a spiral! Is there a lot of sanding involved when doing a twist? I'm guessing the quickest way would be to use some cloth backed sandpaper strips and go up the grits. Can anyone please share some experience here. -Tim - Original Message - From: Dexter Bland To: Legacy Ornamental Mills Sent: Thursday, August 11, 2016 8:09 AM Subject: Re: candy dish Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
nice work On Thu, Aug 11, 2016 at 10:09 AM, Dexter Bland <dexterbl...@gmail.com> wrote: > Stan, > Very nice work. The wood appears to be walnut. I'm sure lots of time > sanding the spindles. What kind of finish did you use? Some poly or tongue > oil? > > > On Tuesday, August 9, 2016 at 10:02:31 PM UTC-5, Stan Eichelberger wrote: > >> candy dish made for Mansfield State Prison honor guard to thank the >> furnual home where they practice. Spindles made on 900 mill >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To post to this group, send email to legacy-ornamental-mills@ > googlegroups.com. > Visit this group at https://groups.google.com/ > group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Stan, Very nice work. The wood appears to be walnut. I'm sure lots of time sanding the spindles. What kind of finish did you use? Some poly or tongue oil? On Tuesday, August 9, 2016 at 10:02:31 PM UTC-5, Stan Eichelberger wrote: > candy dish made for Mansfield State Prison honor guard to thank the > furnual home where they practice. Spindles made on 900 mill > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: candy dish
Very very nice excellent job I really like it What woods? and what spiral was it pitch and starts etc, and what bits were used? And what other machines were used to make it Again great job Bill From: 'Stan Eichelberger' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Wednesday, 10 August 2016 1:03 PM To: Legacy Ornamental Mills Subject: candy dish candy dish made for Mansfield State Prison honor guard to thank the furnual home where they practice. Spindles made on 900 mill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Hello Stan. I very much like Your project ! Are there 6 hollow spindles on this project? Are they Black Walnut? or some-other kind of tropical wood? As I said, I like your project. Nicely done. Thanks for Sharing . C.A.G. - Original Message - From: "'Stan Eichelberger' via Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com> To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com> Sent: Tuesday, August 9, 2016 11:02:30 PM Subject: candy dish candy dish made for Mansfield State Prison honor guard to thank the furnual home where they practice. Spindles made on 900 mill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: candy dish
Really impressive gift and craftsmanship max From: 'Stan Eichelberger' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Sent: Tuesday, August 9, 2016 10:02 PM To: Legacy Ornamental Mills Subject: candy dish candy dish made for Mansfield State Prison honor guard to thank the furnual home where they practice. Spindles made on 900 mill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.