Re: [LIB] Music Playback on 100CT
Date: Fri, 1 Nov 2002 08:48:02 + From: barnacle <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT On Friday 01 Nov 2002 4:16 am, you wrote: > Date: Fri, 01 Nov 2002 04:09:26 + > From: "Matthew Hanson" <[EMAIL PROTECTED]> > > Maybe I ought to find list where problems relating specifically > to audio recording and playback are discussed. I'm suspecting > that even the various HDDs may enter the picture. As I've > mentioned, one HDD I have starts clicking after it runs a while > and gets a bit hot. I'm wondering if it's possible that an over > heated HDD could suddenly loose data transfer speed, and this > these tiny clicks, or dropouts. Any HD as it heats could drop into an autocalibrate mode to reposition the head properly. Time was (when I were but a lad) that one could get special AV drives guaranteed not to do this but I suspect those days are past. Neil ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Fri, 01 Nov 2002 04:09:26 + From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT From: [EMAIL PROTECTED] In a message dated 10/31/02 8:18:42 PM Mountain Standard Time, [EMAIL PROTECTED] writes: > Lee, > > Did you ever find out what was causing your audio noise, encoding > or playback of MP3s? > > Matt > > There was so much information and so many suggestions that I'll need some uninterrupted time (who has that?) to try them all in a systematic way - so I guess the answer to your question is no. I doubt that encoding is the problem, as the noise does not occur at the same point(s) in consecutive playbacks of the same file. Well... David got this WavJammer sound card working fairly well, but it still creates these tiny little clicks in recorded files. I've found that these clicks can indeed orrur both in record and playback of audio. I recall calling Philips support to figure out why their CD-R/RW drive was inserting these same little clicks into copies of music CDs. He had me tweak sound driver settings, CD burning software settings, and driver settings for the CD-ROM and CD-R/RW drive, and the problem went away. Maybe I ought to find list where problems relating specifically to audio recording and playback are discussed. I'm suspecting that even the various HDDs may enter the picture. As I've mentioned, one HDD I have starts clicking after it runs a while and gets a bit hot. I'm wondering if it's possible that an over heated HDD could suddenly loose data transfer speed, and this these tiny clicks, or dropouts. Matt _ Unlimited Internet access -- and 2 months free! Try MSN. http://resourcecenter.msn.com/access/plans/2monthsfree.asp ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 31 Oct 2002 22:27:25 EST From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/31/02 8:18:42 PM Mountain Standard Time, [EMAIL PROTECTED] writes: > Lee, > > Did you ever find out what was causing your audio noise, encoding or > playback of MP3s? > > Matt > > There was so much information and so many suggestions that I'll need some uninterrupted time (who has that?) to try them all in a systematic way - so I guess the answer to your question is no. I doubt that encoding is the problem, as the noise does not occur at the same point(s) in consecutive playbacks of the same file. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Fri, 01 Nov 2002 03:17:35 + From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT Lee, Did you ever find out what was causing your audio noise, encoding or playback of MP3s? Matt From: [EMAIL PROTECTED] In a message dated 10/31/02 3:45:25 PM Mountain Standard Time, [EMAIL PROTECTED] writes: > > Date: Thu, 31 Oct 2002 13:31:53 -0800 (PST) > > From: David Chien <[EMAIL PROTECTED]> > > Subject: Re: [LIB] Valvoline SynPower Penetrating Lubricant > > > > The Valvoline stuff, even though it puts out an odor that takes > > forever to dissipate, works fine in my HP m820e. Just used the > > straw, dropped a few drops over the rails, moved the heads back > > and forth by the gears a few times to get total coverage, and > > that was it. Working fine ever since. > > You might find a teflon lubricant in drop form in a gun shop. ISTR > that they were sold in the UK for air rifles and pistols because > they didn't diesel. OTOH I've never been in a US gun shop, they > might consider air weapons beneath their contempt. > > Neil > Well since the topic's been broached, there is a very good light gun oil - Break-Free CLP - which used to be mil-spec, don't know if it is anymore. It has the dreaded petroleum distillates, but also teflon. I use it for everything, and it has not yet caused any damage to plastic parts. Also a product called Rem-Oil, made by Remington. Same kind of formulation. I would stay away from WD-40. It is great stuff for certain applications, but its lubricant is quite volatile, and won't provide lasting lubrication. And Neil, there is a great following here for air weapons, although you're right, the US gun shops typically don't specialize in them. Lee _ Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Fri, 18 Oct 2002 19:22:59 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT At 02:48 AM 18/10/2002 -0700, you wrote: Date: Fri, 18 Oct 2002 13:42:45 +0300 From: Vitaly Pavlenko <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT Raymond! > (I did a few test runs on how long it'd take to drain the battery on the > various settings when I first got it and going from full to halfway made > about 5 minutes difference and from halfway to all throttled back made > about 1 minute difference). A bit strange to hear that from you :). How much is 1 minute? What was the lib doing during the test? How much was the CPU power (MIPS, whatever) for each setting? I always assumed that there was no reason for anything but full power CPU setting if you are using NT/Win2K or Win9x + CPU idling software. That is no reason at all. Am I wrong? All tests were done with a standard Win98SE setup with all Toshiba power saving drivers active (ie. hairy lightbulb), no CPU idling and Winamp playing in a loop with full quality (so the CPU and hard drives don't get a chance to sleep) and the screen set to be always on and on full brightness. I spent a weekend performing these tests when I first got my L100 using a variety of settings so I could get some idea of how accurate that battery meter was. I was surprised with the result as well, it would seem that throttling the CPU back, at least when it's doing something that'll keep it working at a reasonable level continuously, makes no difference. Of course, if one were, say, using text editors and compilers and the like (ie. the CPU will spend a lot of time unoccupied) then perhaps you'd get a bigger difference. In normal everyday use though I do use CPU idling plus I turn the screen down (and set it to turn off after a while) but even in general use I don't see an awful lot of difference between throttling the CPU and not throttling the CPU so generally I don't bother. - Raymond --- /~\ | | "Does fuzzy logic tickle?"| | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Fri, 18 Oct 2002 13:42:45 +0300 From: Vitaly Pavlenko <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT Raymond! > (I did a few test runs on how long it'd take to drain the battery on the > various settings when I first got it and going from full to halfway made > about 5 minutes difference and from halfway to all throttled back made > about 1 minute difference). A bit strange to hear that from you :). How much is 1 minute? What was the lib doing during the test? How much was the CPU power (MIPS, whatever) for each setting? I always assumed that there was no reason for anything but full power CPU setting if you are using NT/Win2K or Win9x + CPU idling software. That is no reason at all. Am I wrong? Vitaly ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 17 Oct 2002 13:16:25 -0700 (PDT) From: David Chien <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT > > > static discharge. It's the same sort of scratch noise, but bI haven't > > been > raise an interesting point - maybe the noise I'm getting is a function of the > > original ripping or other electronic mangling. All the music on my 100ct was > > ripped from CDs and then converted to .mp3 format to save HDD space. In > addition, they were ripped to one hard drive, converted to .mp3, then copied Should not be a problem at all to move data around like this. I do it all the time w/o any problems at all. Also, on the L110 with the HP 820 CD-RW 4x4x20x portable SCSI PCMCIA drive, ripping cds to WAVE files on the Libretto works just fine. It won't rip to MP3s in real time because it's too little CPU power. Razorlame converts the waves to MP3s after that just fine, albeit a bit longer than on the P4 2Ghz desktop. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos & More http://faith.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 17 Oct 2002 11:49:06 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/17/02 8:41:30 AM Mountain Daylight Time, [EMAIL PROTECTED] writes: > almost like > > static discharge. It's the same sort of scratch noise, but bI haven't > been > > able to correlate it with anything. I'm starting to think I'm too picky, > > or > > that my expectations are too high. > > > > >So translate for us Lee... did you get the pops to go away? I'll try > what > > >ever you've done if you managed to fix the problem. > > > I know next to nothing about .mp3 and music on the computer ( although I > would like very much to do more with it... I enjoy certain music you can't > get on the radio and since I almost always have my Libretto with me when > travelling I would like to have my music with me... ) > > But I do recall very bright "scratch" noise bursts as well as a constant > ticking sound when ripping from CDs. Perhaps these noise bursts are more > common than you would think. Do some searching for keywords like "ripping" > "pops" "ticks" etc. > > Thanks > > Pres Waterman W2PW > c/o Patchogue Motors, Inc. > Long Island Ford and Kia dealer > > GO BILLS! > ©¿© Pres, Yours are the same reasons I started putting .mp3s on my 100ct. And you raise an interesting point - maybe the noise I'm getting is a function of the original ripping or other electronic mangling. All the music on my 100ct was ripped from CDs and then converted to .mp3 format to save HDD space. In addition, they were ripped to one hard drive, converted to .mp3, then copied to the 100ct through an SCSI connection. Too much electronic handling, maybe? I hesitate to rip directly to the 100ct, as it seemed to choke on that in early attempts. Maybe copying .wav file format to the 100ct and then converting to .mp3 format might help. Lots to try - thanks for the idea. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 17 Oct 2002 10:34:33 -0400 From: =?iso-8859-1?B?t1ByZXMgV2F0ZXJtYW63?= <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT almost like > static discharge. It's the same sort of scratch noise, but bI haven't been > able to correlate it with anything. I'm starting to think I'm too picky, or > that my expectations are too high. > > >So translate for us Lee... did you get the pops to go away? I'll try what > >ever you've done if you managed to fix the problem. I know next to nothing about .mp3 and music on the computer ( although I would like very much to do more with it... I enjoy certain music you can't get on the radio and since I almost always have my Libretto with me when travelling I would like to have my music with me... ) But I do recall very bright "scratch" noise bursts as well as a constant ticking sound when ripping from CDs. Perhaps these noise bursts are more common than you would think. Do some searching for keywords like "ripping" "pops" "ticks" etc. Thanks Pres Waterman W2PW c/o Patchogue Motors, Inc. Long Island Ford and Kia dealer GO BILLS! ©¿© ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 17 Oct 2002 06:17:18 + From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >From: [EMAIL PROTECTED] Good job Lee! > >So translate for us Lee... did you get the pops to go away? I'll try >what > >ever you've done if you managed to fix the problem. > >Yes, with Andy's idea. The downside is using lots of RAM and therefore >limiting other activities. As I said, I'll keep working on the Winamp >buffers and see how that works. Do you have another hard drive by any chance? I'd be really curious to find out if another drive would have the same problem. I know that switching HDDs in my Lib, the problem goes away. And that I'll not hear >any< such faint clicks until the system has been working hard for a period of time. Shut the system down, le it cool, boot it up again, and the click are gone. I'll be interested in trying Andy's fix myself. Matt _ Get faster connections -- switch to MSN Internet Access! http://resourcecenter.msn.com/access/plans/default.asp ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 22:04:47 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/16/02 7:59:32 PM Mountain Daylight Time, [EMAIL PROTECTED] writes: > >If anyone has tested specifc mics, I'd enjoy reading about it. Testing > >high-quality mics is an expensive proposition! > > Well I can tell you right now, the microphone on my notetaker is VERY omni > directional. It picks up everything I don't want (tape transport noise, the > guy coughing next to me, the fluoro lights buzzing) and it never picks up > what I do want! > > > - Raymond Well, that gave me a laugh. Brings back the exact same memories...getting home from class, turning on the mini-cassette recorder to review the lecture, and getting the sounds of people in the hall, somebody blowing their nose, and way, way off in the background the unmistakable, but undecipherable, voice of the prof. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 17 Oct 2002 09:56:23 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT At 06:40 PM 16/10/2002 -0700, you wrote: >Date: Wed, 16 Oct 2002 21:35:09 EDT >From: [EMAIL PROTECTED] >Subject: Re: [LIB] Music Playback on 100CT > > >In a message dated 10/16/02 12:12:36 PM Mountain Daylight Time, >[EMAIL PROTECTED] writes: > > > These are just the sorts of things I'd love to be able to record myself > Lee! > > >If anyone has tested specifc mics, I'd enjoy reading about it. Testing >high-quality mics is an expensive proposition! Well I can tell you right now, the microphone on my notetaker is VERY omni directional. It picks up everything I don't want (tape transport noise, the guy coughing next to me, the fluoro lights buzzing) and it never picks up what I do want! - Raymond --- /~\ | | "Does fuzzy logic tickle?"| | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Thu, 17 Oct 2002 09:53:32 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT At 04:30 PM 16/10/2002 -0700, you wrote: >Date: Wed, 16 Oct 2002 16:24:42 -0700 (PDT) >From: David Chien <[EMAIL PROTECTED]> >Subject: Re: [LIB] Music Playback on 100CT > > >Dont' recall if I mentioned it, but remember to turn the Toshiba Power Control >ICON (hairy lightbulb in taskbar) to FULL POWER. > >Even my L110 will skip and stutter if it's turned down to LOW POWER because >it sleeps the CPU quite often without regard to what the programs really want >out of it. Strange ... I routinely run my L100 as an MP3 player on low power setting with the lid closed to save power and I don't get skipping problems at all I think I did adjust it so it only turned the CPU down halfway though (I did a few test runs on how long it'd take to drain the battery on the various settings when I first got it and going from full to halfway made about 5 minutes difference and from halfway to all throttled back made about 1 minute difference). Having said that, whatever I do, whenever I play MP3s on my old Tecra 500 (P120, 48 MB RAM) it skips like mad ... - Raymond --- /~\ | | "Does fuzzy logic tickle?"| | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 21:35:09 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/16/02 12:12:36 PM Mountain Daylight Time, [EMAIL PROTECTED] writes: > These are just the sorts of things I'd love to be able to record myself Lee! > > >so the mic would have to be non-directional. > >I've tried the various PC mics but they're not suitable. > > The mics are the very heart of recording. In order to record sound well in > varying settings, the professionals have a quiver of different mics to draw > from for each individual recording situation. I'm not famliar with them all > > myself, but I know they're not cheap. However I think I'd want at least > three types. Ones with a narrow field (is that how they'd be described... > Neil... where are you thee days?), ones with a medium, and ones wide field > capcity. I have a couple condenser mics which work quite well, but they're much too large to pack along on trips. The small size of the Libretto sets a high standard for ancillary equipment! I hope to find something small that is at least a decent compromise of size and performance. I think a small wide-field mic would be optimal in that the recording challenge would be things like church bells or other sounds at a distance. If anyone has tested specifc mics, I'd enjoy reading about it. Testing high-quality mics is an expensive proposition! Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 21:24:08 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT All: First, thanks for all the suggestions. I will try to recap the various tests. First, Raymond suggested a separate volume control (as a near-cure for the background hiss) for the headphones - I have not had time to get a volume control yet. To fix the dropout/scratch noises: In a message dated 10/15/02 6:36:11 PM Mountain Daylight Time, [EMAIL PROTECTED] writes: > Now I do realize that Win98 doesn't have software IRQs but perhaps a > related issue may be at work in your case? Do you have any PCMCIA cards in > your laptop which might be sharing an IRQ with the sound system? I can't > remember on the libby (and it's not with me at the moment) but can you > shift the sound card to a different IRQ in the BIOS? As it happens, I use a TDK Global Freedom modem which adds a "Wave Device for Voice" line under Sound in Device Mangler. I tried deactivating the modem during audio playback, which removed the Wave Device, but it was difficult to gauge any improvement in playback. The modem uses IRQ 3 and the Yamaha sound uses IRQ 5. From: "Andy Lawn" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >Raymond wrote: >> Winamp options>preferences>input>Nullsoft MPEG Audio Decoder>Configure >> Change the decode thread priority to highest. Yes I know this isn't a >> buffer setting, I just remembered I made this adjustment but I can't >> remember if it's there by default. The setting was already on highest. >> Winamp options>preferences>output>(whatever you have it set to here, >> probably DirectSound) >>Play with the buffer settings here, it will vary depending on >> what output >> module you're using and how much RAM you want to devote to this task. I played with the various buffer settings a little, but because the noise occurs infrequently, it takes some time to evaluate the effect of each change. Worth exploring further here. >Lee, another setting you could try is in options>preferences>plugins>input>Nullsoft >MPEG Audio Decoder. There's a setting called "Buffer entire file from disk if file is >smaller than:". If you can spare the memory then try setting this to 5000KB, or some >other size that is larger than most of your mp3 tracks. That should give smoother >playback (at the expense of longer gaps between tracks), and extend battery life as >the lib will be able to put the hard disk to sleep while playing each track. >.Andy This worked very well. Setting the "file smaller than" to 5000KB prevented hard drive hits during playback, and so noise was mostly eliminated. I say mostly because some noise seems to be unrelated to HDD activity, almost like static discharge. It's the same sort of scratch noise, but bI haven't been able to correlate it with anything. I'm starting to think I'm too picky, or that my expectations are too high. >So translate for us Lee... did you get the pops to go away? I'll try what >ever you've done if you managed to fix the problem. > >Matt Yes, with Andy's idea. The downside is using lots of RAM and therefore limiting other activities. As I said, I'll keep working on the Winamp buffers and see how that works. One additional change I made in Winamp was options>preferences>output>nullsoft waveOut plug-in v2.02(x86) - changed from Wavemapper to Yamaha Audio. No real change noted. Anybody know why Wavemapper is recommended on this setting, rather than Yamaha Audio? Thanks again for all the help, folks. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 16:24:42 -0700 (PDT) From: David Chien <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT Dont' recall if I mentioned it, but remember to turn the Toshiba Power Control ICON (hairy lightbulb in taskbar) to FULL POWER. Even my L110 will skip and stutter if it's turned down to LOW POWER because it sleeps the CPU quite often without regard to what the programs really want out of it. --- I was suggesting Winamp 2.8 or lower because they work for certain; 3.x+ is the latest, bigger, takes up more space, and may just skip on slower systems because it hogs more resources. Oh, maybe try one of the DOS MP3 players just to make sure it's not a HW thing -- for 100% sure, the L100 should easily playback the MP3s w/o any problems under DOS. d =) = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos & More http://faith.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 18:09:17 + From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >From: [EMAIL PROTECTED] > >I'd hoped to be able to record source-to-Libretto too, and have been >looking >for a decent sound card with line-in jack, ... You're the first person beside myself that I can recall who's experessed an interest in this. I'm hoping I can find a card with the input/output plugs on the end that remains outside of the system, if such a thing exists. The long cord with a large jack box on the end that the WavJammer would be pretty clumsy in a portable situation. >Too bad no-one on the list has had a report...if I find a decent card >I'll post the review. Have you or anyone else tried different microphones >on >the Librettos? I'd like to record touristy things like church bells, music >festivals, conversations, etc. These are just the sorts of things I'd love to be able to record myself Lee! >so the mic would have to be non-directional. >I've tried the various PC mics but they're not suitable. The mics are the very heart of recording. In order to record sound well in varying settings, the professionals have a quiver of different mics to draw from for each individual recording situation. I'm not famliar with them all myself, but I know they're not cheap. However I think I'd want at least three types. Ones with a narrow field (is that how they'd be described... Neil... where are you thee days?), ones with a medium, and ones wide field capcity. >#1: OK, I'll try that >#2: Done >#3: Done inadvertently - almost upgraded a few days ago. What is the >advantage of 2.80? >#4: Done >#5: Mostly just audio playback, no other programs running. >#6: Done > >Thanks, David. So translate for us Lee... did you get the pops to go away? I'll try what ever you've done if you managed to fix the problem. Matt _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 09:41:39 +0100 From: "Andy Lawn" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT Raymond wrote: > Winamp options>preferences>input>Nullsoft MPEG Audio Decoder>Configure > Change the decode thread priority to highest. Yes I know this isn't a > buffer setting, I just remembered I made this adjustment but I can't > remember if it's there by default. > > Winamp options>preferences>output>(whatever you have it set to here, > probably DirectSound) > Play with the buffer settings here, it will vary depending on > what output > module you're using and how much RAM you want to devote to this task. Lee, another setting you could try is in options>preferences>plugins>input>Nullsoft MPEG Audio Decoder. There's a setting called "Buffer entire file from disk if file is smaller than:". If you can spare the memory then try setting this to 5000KB, or some other size that is larger than most of your mp3 tracks. That should give smoother playback (at the expense of longer gaps between tracks), and extend battery life as the lib will be able to put the hard disk to sleep while playing each track. .Andy ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Wed, 16 Oct 2002 08:31:42 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >Looks as though my recollection of this problem was a lot worse than reality. > I've been out of town (away from the Libretto) for most of the summer, and >posted this question without rechecking the problem. While there are >occasional dropouts (sounds like a light scratch on a vinyl record), these >occur infrequently and not always in association with hard drive activity. It just occurs to me ... I have this EXACT same problem on my desktop computer (Athlon XP1600+, SB Live 5.1D, 512MB RAM, ATA RAID array, Intel Pro/100B NIC, Win2kSP2 ... as far as MP3 playing is concerned, speed ain't a problem for this thing) where during times of disk activity (and to a lesser extent hectic network activity) MP3 playback (or ANY audio playback for that matter) stutters slightly and does the scratchy record thing, even when CPU utilization is sitting at below 10% ... in my case though I've traced it to the fact that my sound card, network card and RAID controller are all on virtual software IRQs (the sound card and network card are both on IRQ16, the RAID controller on IRQ17) as a result of Win2k's bizarre IRQ steering algorithms. Unfortunately, in my case I can't do anything about it because the Win2k ACPI kernel doesn't let you assign IRQs yourself (to the extent that even if you go in the BIOS and change the IRQ settings round, Win2k will change them back and the slot-shuffle doesn't work either). Next time I reinstall (you can't switch kernels without reinstalling because the registry stuffs up) I'll be forcing Win2k to install the standard non-ACPI kernel (I don't use the power saving stuff anyway), I'm just putting up with it in the meantime (it really only gets annoying when I'm doing a file copy, everyday use is fine presumably because the sound card's on-board buffer smooths things over). Now I do realize that Win98 doesn't have software IRQs but perhaps a related issue may be at work in your case? Do you have any PCMCIA cards in your laptop which might be sharing an IRQ with the sound system? I can't remember on the libby (and it's not with me at the moment) but can you shift the sound card to a different IRQ in the BIOS? - Raymond --- /~\ | | "Does fuzzy logic tickle?"| | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 16:43:26 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/15/02 2:05:58 PM Mountain Daylight Time, [EMAIL PROTECTED] writes: > > I have recently begun to use my 100CT's 20GB HDD for mp3 storage and > > playback. This works nicely except for very short dropouts in the > playback > > which correspond perfectly and consistently with hard drive hits. Two > other > > PCs (a laptop and a desktop) don't have this problem. I'm using Winamp > and > > the hard drive is an almost new IBM 30GN. Does anyone have any ideas? TIA > >Increase the Winamp waveout buffer size if you're using that. >Defrag the HD. >Use winamp 2.80 vs. the latest 3.x. >Upgrade to 64MB RAM total if not already. >Kill background tasks and applications and try again. >Kill virus scanner. #1: OK, I'll try that #2: Done #3: Done inadvertently - almost upgraded a few days ago. What is the advantage of 2.80? #4: Done #5: Mostly just audio playback, no other programs running. #6: Done Thanks, David. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 16:39:26 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/15/02 8:31:36 AM Mountain Daylight Time, [EMAIL PROTECTED] writes: > I routinely run my libby close to the crash line (Word2k, Excel2k, Matlab, > Winamp and IE all running at once whilst being on a network for instance) > and apart from the music stopping whilst everything else is busy loading > something, it's been *relatively* fine as far as audio playback goes ... I > do recall turning the quality down (eg. quater wave, 8 bit, mono) to > actually make everything else useable though. I tried this last night, everything worked well, except a moment of silence, then modem- screech-over-Copland as I got on-line. Couldn't make the HDD affect the sound, though. >Turn the volume on the libby all >the way up on all the mixers (Winamp mixer, wave mixer and main mixer all >set to their highest settings) then use the external inline volume control >to adjust the volume to a comfortable level. This serves as a crude >de-emphasis system and does reduce the noise considerably. I'll give this a try as soon as I can get a volume control. Winamp options>preferences>input>Nullsoft MPEG Audio Decoder>Configure Change the decode thread priority to highest. Yes I know this isn't a buffer setting, I just remembered I made this adjustment but I can't remember if it's there by default. Winamp options>preferences>output>(whatever you have it set to here, probably DirectSound) Play with the buffer settings here, it will vary depending on what output module you're using and how much RAM you want to devote to this task. Hope this helps! Thanks, it does! Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 16:33:03 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/15/02 11:51:31 AM Mountain Daylight Time, [EMAIL PROTECTED] writes: > I've had problems similar to this with some hard drives in the past after > they've been running for a while, and start to heat up. It sounded very > much like a not too scratchy LP with the clicks being fairly quiet, but > continuous and random. Does your system do this when playing MP3s right > after you first boot the system? Or does this happen only after the system > has been running for a while? The noise, which is just as you describe, seems to be more frequent after the Libretto is warm and has had some HDD activity. It's a little disappointing since the HDD is a fluid-drive IBM which is otherwise quiet and reliable. And the Libretto does everything else so well, it's frustrating that playback suffers. I'll try the separate volume control idea ASAP. >Besides wanting to record a decent signal with the Lib, this has been >something I've been dealing with since I got my MP3 player that is getting >me interested in finding a decent sound card. I've yet to get any feedback >from anyone on the list who actually has one, and has tested it out fairly >extensively. I really wonder how well those old 16 bit sound cards from the >late 90s manage to filter out all of the noise from the system's hardware, >what kind of signal to noise ratio they offer, and just how little noise is >introduced into recorded and feedback signals. I'd hoped to be able to record source-to-Libretto too, and have been looking for a decent sound card with line-in jack, but they're pretty expensive on ebay. Too bad no-one on the list has had a report...if I find a decent card I'll post the review. Have you or anyone else tried different microphones on the Librettos? I'd like to record touristy things like church bells, music festivals, conversations, etc. so the mic would have to be non-directional. I've tried the various PC mics but they're not suitable. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 13:01:28 -0700 (PDT) From: David Chien <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT > I have recently begun to use my 100CT's 20GB HDD for mp3 storage and > playback. This works nicely except for very short dropouts in the playback > which correspond perfectly and consistently with hard drive hits. Two other > PCs (a laptop and a desktop) don't have this problem. I'm using Winamp and > the hard drive is an almost new IBM 30GN. Does anyone have any ideas? TIA Increase the Winamp waveout buffer size if you're using that. Defrag the HD. Use winamp 2.80 vs. the latest 3.x. Upgrade to 64MB RAM total if not already. Kill background tasks and applications and try again. Kill virus scanner. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos & More http://faith.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 17:47:42 + From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >From: [EMAIL PROTECTED] > >While there are occasional dropouts (sounds like a light scratch on a vinyl >record), these occur infrequently and not always in association with hard >drive activity. I've had problems similar to this with some hard drives in the past after they've been running for a while, and start to heat up. It sounded very much like a not too scratchy LP with the clicks being fairly quiet, but continuous and random. Does your system do this when playing MP3s right after you first boot the system? Or does this happen only after the system has been running for a while? >System Resources show 94% after a fresh boot, so no problem there. I guess this isn't a problem then, esp. after reading Raymond's note. >What I have noticed, in addition to the occasional "dropouts", is >background noise very much like tape hiss. Since I got my portable MP3 player, and started listening to my Lib with headphones, I've noticed that the Yamaha OPL3-SAx sound chip on these Librettos is a >very< noisy chip. I never noticed it was quite as bad is it is when I was playing music through external speakers. The signal to noise ratio is not very high at all, and I'd be surprised if it's in the mid 70db range, where the high 90db, and over 100db mark is really preferable. As Raymond pointed out, the only way to deal with this is to crank up the volume of the signal, and try to drown out the noise. However if you listen to albums with a lot of low level signal and quiet passages like some tracks from Peter Gabriel's new 'Up' CD, that nasty noise just can't be avoided. Besides wanting to record a decent signal with the Lib, this has been something I've been dealing with since I got my MP3 player that is getting me interested in finding a decent sound card. I've yet to get any feedback from anyone on the list who actually has one, and has tested it out fairly extensively. I really wonder how well those old 16 bit sound cards from the late 90s manage to filter out all of the noise from the system's hardware, what kind of signal to noise ratio they offer, and just how little noise is introduced into recorded and feedback signals. Matt _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 22:27:20 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >System Resources show 94% after a fresh boot, so no problem there. I routinely run my libby close to the crash line (Word2k, Excel2k, Matlab, Winamp and IE all running at once whilst being on a network for instance) and apart from the music stopping whilst everything else is busy loading something, it's been *relatively* fine as far as audio playback goes ... I do recall turning the quality down (eg. quater wave, 8 bit, mono) to actually make everything else useable though. >I have >the "hairy" light bulb, speaker, and PCMCIA monitor on the system tray. I'm >running W98se with 64MB RAM. Same here. >What I have noticed, in addition to the occasional "dropouts", is background >noise very much like tape hiss. This is through headphones. Any way to >reduce that? That's normal. The EE's out there correct me if I'm wrong but you'll notice that the impedance of your headphones is probably 32 ohms, a lot higher than, say, a pair of 8 ohm speakers jacked into the port. This means that the current induced in the audio circuit AFTER the amplifier from, say, the video refresh (you'll notice the hiss changes when you flick resolutions for instance) or the hard drive (try listening carefully when you wake the hard drive) is a lot more noticeable. Another thing is that you set the volume itself significantly lower for headphones than for speaker but the noise, being mainly injected into the amplifier circuit AFTER the volume control, stays at the same level hence it'll be more noticeable through headphones than through speakers where your volume would be higher. Although this is probably NOT the most elegant way of doing things, I've found that simply getting one of those little inline volume controls (or a pair of headphones with inline volume controls or volume controls on the 'phones themselves) does the trick nicely. Turn the volume on the libby all the way up on all the mixers (Winamp mixer, wave mixer and main mixer all set to their highest settings) then use the external inline volume control to adjust the volume to a comfortable level. This serves as a crude de-emphasis system and does reduce the noise considerably. The volume control probably also does some rudimentary matching as well depending on how it was designed. Remember to turn the volume down again on the mixers (or mute it) when you unplug the headphones or that little internal speaker will overdrive like mad next time you next get a system 'ding'! > And Raymond, how do I change the buffer size? Thanks for any >suggestions. Winamp options>preferences>input>Nullsoft MPEG Audio Decoder>Configure Change the decode thread priority to highest. Yes I know this isn't a buffer setting, I just remembered I made this adjustment but I can't remember if it's there by default. Winamp options>preferences>output>(whatever you have it set to here, probably DirectSound) Play with the buffer settings here, it will vary depending on what output module you're using and how much RAM you want to devote to this task. Hope this helps! - Raymond --- /~\ | | "Does fuzzy logic tickle?"| | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 09:42:45 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] Music Playback on 100CT In a message dated 10/14/02 7:25:13 PM Mountain Daylight Time, [EMAIL PROTECTED] writes: > By dropouts do you mean the sound goes completely silent for the 'drop out' > period (perhaps a hardware issue) or the sound keeps going but you hear the > last fraction of a second repeated two or more times during the 'drop out' > period (perhaps more a software issue)? I've been using my un-overclocked > 100CT with a 20GB Fujitsu for a while now playing MP3s on full quality > without any problems but I do recall having to push the buffer size up a > bit, maybe that may be it? > Have you checked to see what the Windows system resources are at boot > recently? Are you running Win98? I can't remember about W95, but you can > check resources at boot on the "Performance" tab of "System Properties". I > keep mine at 94%-96% at boot by shutting >everything< down in MSCONFIG > except system tray (actually a couple little things won't use much power). > Do you have a lot of icons on the right end of your task bar? > Matt Raymond & Matt, Looks as though my recollection of this problem was a lot worse than reality. I've been out of town (away from the Libretto) for most of the summer, and posted this question without rechecking the problem. While there are occasional dropouts (sounds like a light scratch on a vinyl record), these occur infrequently and not always in association with hard drive activity. It is less of a problem than I imagined it to be, but I'm curious about the cause. System Resources show 94% after a fresh boot, so no problem there. I have the "hairy" light bulb, speaker, and PCMCIA monitor on the system tray. I'm running W98se with 64MB RAM. What I have noticed, in addition to the occasional "dropouts", is background noise very much like tape hiss. This is through headphones. Any way to reduce that? And Raymond, how do I change the buffer size? Thanks for any suggestions. Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 05:45:30 + From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT >From: Raymond <[EMAIL PROTECTED]> >>From: [EMAIL PROTECTED] >> >>I have recently begun to use my 100CT's 20GB HDD for mp3 storage and >>playback. This works nicely except for very short dropouts in the >>playback which correspond perfectly and consistently with hard drive hits. >> Two other PCs (a laptop and a desktop) don't have this problem. I'm >>using Winamp and the hard drive is an almost new IBM 30GN. Does anyone >>have any ideas? TIA > >By dropouts do you mean the sound goes completely silent for the 'drop out' >period (perhaps a hardware issue) or the sound keeps going but you hear the >last fraction of a second repeated two or more times during the 'drop out' >period (perhaps more a software issue)? I've been using my un-overclocked >100CT with a 20GB Fujitsu for a while now playing MP3s on full quality >without any problems but I do recall having to push the buffer size up a >bit, maybe that may be it? I haven't experienced this with my L50 or L70, and I run the power sucking monster Musicmatch v.4.0. Have you checked to see what the Windows system resources are at boot recently? Are you running Win98? I can't remember about W95, but you can check resources at boot on the "Performance" tab of "System Properties". I keep mine at 94%-96% at boot by shutting >everything< down in MSCONFIG except system tray (actually a couple little things won't use much power). Do you have a lot of icons on the right end of your task bar? Matt _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Music Playback on 100CT
Date: Tue, 15 Oct 2002 09:22:35 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Music Playback on 100CT At 04:56 PM 14/10/2002 -0700, you wrote: >Date: Mon, 14 Oct 2002 19:50:10 EDT >From: [EMAIL PROTECTED] >Subject: Music Playback on 100CT > > >I have recently begun to use my 100CT's 20GB HDD for mp3 storage and >playback. This works nicely except for very short dropouts in the playback >which correspond perfectly and consistently with hard drive hits. Two other >PCs (a laptop and a desktop) don't have this problem. I'm using Winamp and >the hard drive is an almost new IBM 30GN. Does anyone have any ideas? TIA By dropouts do you mean the sound goes completely silent for the 'drop out' period (perhaps a hardware issue) or the sound keeps going but you hear the last fraction of a second repeated two or more times during the 'drop out' period (perhaps more a software issue)? I've been using my un-overclocked 100CT with a 20GB Fujitsu for a while now playing MP3s on full quality without any problems but I do recall having to push the buffer size up a bit, maybe that may be it? - Raymond --- /~\ | | "Does fuzzy logic tickle?"| | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Music Playback on 100CT
Date: Mon, 14 Oct 2002 19:50:10 EDT From: [EMAIL PROTECTED] Subject: Music Playback on 100CT I have recently begun to use my 100CT's 20GB HDD for mp3 storage and playback. This works nicely except for very short dropouts in the playback which correspond perfectly and consistently with hard drive hits. Two other PCs (a laptop and a desktop) don't have this problem. I'm using Winamp and the hard drive is an almost new IBM 30GN. Does anyone have any ideas? TIA Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **