Re: request mailing list settings
ario wrote: When I receive a message from this mailing list, often I hit reply and answer the message, to find out later that my reply only has been sent to the private mail address of the sender of the original message which I'm replying to. This poor person then has to send me an e-mail asking me to keep the discussion in the mailing list. And I have then to resend the message to the mailing list itself. This I think is waste of time and energy and could be avoided by setting the mailing list parameters (if possible) such that, when replying, the reply is sent to the mailing list itself, not to the original sender. Wouldn't it be as simple as letting the mailing list server insert something like X-Reply-to: [EMAIL PROTECTED] or something like that into the header of the forwarded mails? It's not that I (and several other list members) am too lazy to change the header, but sometimes (or more often than not :) I simply forget to do this. I have agreed with you for quite some time since I subscribe to quite a few lists that are set up like this one. I have made the mistakes you have made often. OTOH I appreciate that many lists like this one are set up so that people who are not subscribed to the list can also post. What I have started to do is to choose Reply All and then adjust the header as necessary. This works for this list as well as for subscriber-only lists. I suggest you consider developing this habit as a compromise that should benefit all. If the list is changed as you suggest then all non-subscribers will not receive the benefit of seeing your contributions to this list unless they constantly search the archives. Then again allowing non-subscribers to post does invite SPAM so there might not be a simple solution here but the Reply All solution works for me. Regards, Paul Scott ___ Lilypond-user mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/lilypond-user
Re: I NEED ASSISTANCE PLEASE
I sincerely hope no one pays any attention to these help me transfer my corrupt father/uncle/husband's stash out of Nigeria/Congo/Rwanda scams. Just in case: they are nothing but scams designed to bilk the gullible and avaricious. Oscar El sab, 21-06-2003 a las 10:04, [EMAIL PROTECTED] escribio: Date: Sat, 21 Jun 2003 17:47:45 +0200 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: I NEED ASSISTANCE PLEASE Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=CHINESEBIG5 Precedence: list Reply-To: [EMAIL PROTECTED] Message: 2 Sir, I need your help,I am Davis Moful the son of a Late minister during the reign of mobutu seseko, I came to know you in the course of my search for a reliable and God fearing partner and I decide to contact you because I believe you are a reputable person and I felt you can help us over this confidential matter. I count on your intergrity and honesty to be able to handle this business. My father was a minister in Democratic Republic of Congo during the reign of Late President Mobutu. Our father was killed during the rebel attack and our house was burnt. We manage to escape to Accra Ghana with my mother and two of my sisters where we are now taking refuge.Before the death of my father he deposited US$25 MILLION, with a security company firm that transports valuable goods and consignments through diplomatic means.The money is kept in a trunk boxes and was registered as precious substance. Thus there is nobody that knows that it is money that is in the box. All the documents with which the money was deposited is with us. I am looking for somebody that is capable and willing to travel to Madrid-Spain to receive the two trunk boxes of money on behalf of my family from the security company and buy a house where we can live the rest of our life, for us and invest the rest part of the money in any lucrative business. We need a trust worthy and experience person that will help us to invest this money in your country and take us as one family and will also buy a house for us over there where we can live safely. We are expecting to hear from you.Please contact me on this Email for now first [EMAIL PROTECTED] for your anticipated cooperation.please include your telephone number and fax number in your reply. Best Regards DAVIS MOFUL -- ___ Lilypond-user mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/lilypond-user End of Lilypond-user Digest, Vol 7, Issue 39 ___ Lilypond-user mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/lilypond-user
getting closer
Hi all,
I made a wrapper file as follows:
\documentclass [a4paper] {article}
\usepackage[english,hebrew]{babel}
\usepackage{amsmath}
\usepackage[dvips]{graphicx}
\begin{document}
input{lilyponddefs.tex}
\input titledefs.tex
\def\mustmakelilypondtitle{abcd}
\begin{document}
\lilypondfile{myscore.ly}
\end{document}
and ran:
[EMAIL PROTECTED] aamehl]$ lilypond-book mywrapper.lytex
lilypond-book (GNU LilyPond) 1.6.10
Reading `/home/aamehl/mywrapper.lytex'
Reading `/home/aamehl/myscore.ly'
Running Latex for finding dimensions...
invoking `latex '\nonstopmode \input lily-tmp.tex' 1 /dev/null 2
/dev/null'
Error command exited with value 256
Exiting ...
Invoking LaTeX failed.
This is the error log:
This is TeX, Version 3.14159 (Web2C 7.3.1) (format=latex 2003.2.18) 21
JUN 2003 21:26
**\nonstopmode \input lily-tmp.tex
(lily-tmp.tex (/usr/share/texmf/tex/latex/base/article.cls
Document Class: article 2001/04/21 v1.4e Standard LaTeX document class
(/usr/share/texmf/tex/latex/base/size10.clo
File: size10.clo 2001/04/21 v1.4e Standard LaTeX file (size option)
)
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
(/usr/share/texmf/tex/generic/babel/babel.sty
Package: babel 2001/03/01 v3.7h The Babel package
(/usr/share/texmf/tex/generic/babel/english.ldf
Language: english 2001/04/15 v3.3l English support from the babel system
(/usr/share/texmf/tex/generic/babel/babel.def
File: babel.def 2001/03/01 v3.7h Babel common definitions
[EMAIL PROTECTED]
[EMAIL PROTECTED]
)
[EMAIL PROTECTED] = a dialect from [EMAIL PROTECTED]
)
(/usr/share/texmf/tex/generic/0ivritex/rlbabel.def
File: rlbabel.def 2003/06/05 v2.3g1 Right-to-Left support from the babel
system
Hebrew language support from the babel system
To avoid this error message,
run TeX--XeT or e-TeX engine instead of regular TeX.
! Right-to-Left Support Error: use TeX--XeT or e-TeX engine.
l.77 engine}
%
This error message was generated by an \errmessage
... (further messages elided)...
[EMAIL PROTECTED] aamehl]$ lilypond-book mywrapper.lytex
So where do I tell it to use e-TeX or Tex--Xet??
This is starting to get exciting.
Thanks
Mats (lilypond users) And Tzafrir (Ivritex)
Aaron
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
Re: getting closer
Hi,
Again
On Sun, 2003-06-22 at 00:21, Tzafrir Cohen wrote:
On Sat, Jun 21, 2003 at 10:10:06PM +0300, Aaron wrote:
HI I am still stuck,
Well the directions I got from lilypond group said to make a wrapper
file which I did. Then:
- Run 'lilypond-book mywrapper.lytex' (here is where I got the messege
to use etex)
Maybe try:
TEX=etex lilypond-book mywrapper.lytex
I tried this and also figured maybe I should change the order to start
with lilypond-book mywrapper.lytex TEX=etex but also no go
any ides??
But see alsos below
here is my wrapper file again:
\documentclass [a4paper] {article}
\usepackage[english,hebrew]{babel}
\usepackage{amsmath}
\usepackage[dvips]{graphicx}
\begin{document}
input{lilyponddefs.tex}
\input titledefs.tex
\def\mustmakelilypondtitle{abcd}
\begin{document}
\lilypondfile{myscore.ly}
\end{document}
maybe I should remove the babel line and add something for etex??
- Run 'latex mywrapper.tex' ( didn't get to here)
elatex mywrapper.tex
Frankly I have no idea why defalut 'latex' is the one using etex.
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
OT mailers - was - request mailing list settings
Graham Percival wrote: I recommend that people use the keyboard shortcut for reply to all, instead of using icons. Then you can simply remember hit g when replying on a lilypond- mailing list (for example) and then type your message. With Mozilla it's Ctrl-shift-R which I could memorize but clicking Reply All is just as easy or easier. I haven't found a mail client that handles all of my needs as well as Mozilla and I have tried quite a few. I need easy handling of threads on many lists filtered into many folders from multiple mailboxes. Don't worry about the headers; it's more trouble than it's worth. No trouble here. It's just a couple of clicks with Mozilla. Since I know you are subscribed it was quite easy to avoid sending you two copies. I used to actually click on Address and remove the individual address and replace it with the Lilypond user address from my address book. Have fun, Paul ___ Lilypond-user mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/lilypond-user
[Fwd: Re: getting closer]
-Forwarded Message-
From: Tzafrir Cohen [EMAIL PROTECTED]
To: Aaron [EMAIL PROTECTED]
Subject: Re: getting closer
Date: 22 Jun 2003 01:39:54 +0300
On Sat, Jun 21, 2003 at 11:38:53PM +0300, Aaron wrote:
Hi,
Again
On Sun, 2003-06-22 at 00:21, Tzafrir Cohen wrote:
On Sat, Jun 21, 2003 at 10:10:06PM +0300, Aaron wrote:
HI I am still stuck,
Well the directions I got from lilypond group said to make a wrapper
file which I did. Then:
- Run 'lilypond-book mywrapper.lytex' (here is where I got the messege
to use etex)
Maybe try:
TEX=etex lilypond-book mywrapper.lytex
I tried this and also figured maybe I should change the order to start
with lilypond-book mywrapper.lytex TEX=etex but also no go
any ides??
But see alsos below
here is my wrapper file again:
\documentclass [a4paper] {article}
\usepackage[english,hebrew]{babel}
\usepackage{amsmath}
\usepackage[dvips]{graphicx}
\begin{document}
input{lilyponddefs.tex}
\input titledefs.tex
\def\mustmakelilypondtitle{abcd}
\begin{document}
\lilypondfile{myscore.ly}
\end{document}
maybe I should remove the babel line and add something for etex??
- Run 'latex mywrapper.tex' ( didn't get to here)
elatex mywrapper.tex
^
|
|
here -
Frankly I have no idea why defalut 'latex' is the one using etex.
Ivrix-discuss list. See http://ivrix.org.il.
To unsubscribe, please send mail to [EMAIL PROTECTED] with
only the following line in the message body (NOT SUBJECT!): unsubscribe
--
Tzafrir Cohen +---+
http://www.technion.ac.il/~tzafrir/ |vim is a mutt's best friend|
mailto:[EMAIL PROTECTED] +---+
___
Lilypond-user mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/lilypond-user
