Hi,
I am using the ALIP filesystem with my own kernel and kernel modules (2.6.35).
The startup seems to encounter 3 errors after which it does not proceed any
further. If I am moving outside of an area you can help with I understand. If
you can give me a tip on what could possibly be happening here that would be a
bonus.
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing init memory: 140K
init: ureadahead main process (454) terminated with status 5
mount.nfs: remote share not in 'host:dir' format
mountall: mount / [460] terminated with status 32
Regards,
Fred
-Original Message-
From: Tom Gall [mailto:tom.g...@linaro.org]
Sent: 14 September 2011 16:36
To: Frederik Lotter
Cc: Linaro Dev
Subject: Re: ALIP filesystem
Yes you should be able do something like that. You'll need to care of
installation of modules (if any) that your kernel might need as well
as any other kernel oriented setup you would need.
On Wed, Sep 14, 2011 at 10:29 AM, Frederik Lotter
frederik.lot...@arm.com wrote:
Dear Linaro,
I am looking at using the ALIP filesystem on a Cortex-A8 based RTSM model
(Fast Model). My question is whether the base filesystem can be used without
the HWPACK? In other words, can I use the
http://releases.linaro.org/platform/linaro-n/alip/11.08/alip-n-tar-20110823-1.tar.gz;
as an NFS root filesystem standalone?
Regards,
Fred
**
Frederik Lotter, Application Engineer at ARM Ltd.
UK Support Team:+44 (0)1223 400600
US Support Team:+1 512 381 2928 110
Direct Dial:+44 (0)1223 400549
Email..:frederik.lot...@arm.com
**
snip
--
Regards,
Tom
We want great men who, when fortune frowns will not be discouraged.
- Colonel Henry Knox
Linaro.org │ Open source software for ARM SoCs
w) tom.gall att linaro.org
w) tom_gall att vnet.ibm.com
h) tom_gall att mac.com
-- IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the contents to any
other person, use it for any purpose, or store or copy the information in any
medium. Thank you.
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Linux version 2.6.35.8-arm1-ds5 (psg@spongebob) (gcc version 4.5.2 (Sourcery
G++ Lite 2011.03-41) ) #3 Tue Sep 13 16:38:17 BST 2011
CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: ARM-RealView EB
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: root=/dev/nfs rw
nfsroot=10.1.72.151:/home/psg/Downloads/fsfull rootwait ip=dhcp mem=256M
console=ttyAMA0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 255304k/255304k available, 6840k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0x - 0x1000 ( 4 kB)
fixmap : 0xfff0 - 0xfffe ( 896 kB)
DMA : 0xffc0 - 0xffe0 ( 2 MB)
vmalloc : 0xd080 - 0xf800 ( 632 MB)
lowmem : 0xc000 - 0xd000 ( 256 MB)
pkmap : 0xbfe0 - 0xc000 ( 2 MB)
modules : 0xbf00 - 0xbfe0 ( 14 MB)
.init : 0xc0008000 - 0xc002b000 ( 140 kB)
.text : 0xc002b000 - 0xc03f9000 (3896 kB)
.data : 0xc0412000 - 0xc0436160 ( 145 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 124.51 BogoMIPS (lpj=622592)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a AMBA/PL011
console [ttyAMA0] enabled
dev:uart1: ttyAMA1 at MMIO 0x1000a000 (irq = 45) is a AMBA/PL011
dev:uart2: ttyAMA2 at MMIO 0x1000b000 (irq = 46) is a AMBA/PL011
fpga:uart3: ttyAMA3 at MMIO 0x1000c000 (irq = 47) is a AMBA/PL011
bio: create slab bio-0 at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource timer3
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries
