Re: Novell Linux Technical Resource Kit
On Tue, 29 Jun 2004, Adam Thornton wrote: Has anyone ever had ACPI do anything useful for them? One of my boxen here has an Asus P4P800 MB, carrying an Intel P4 with HT. Unless I enabled ACPI in the kernel (2.6.4-ish, was the same with late-2.4) the second CPU was not recognised. Might have been a peculiarity of the mobo or chipset, but that was useful to me ;) Cheers, Vic Cross -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: logical volume question
On Tue, 29 Jun 2004, Andy Engels wrote: I'm dropping in some software and all of a sudden I'm out of space. Is there a way to verify that /home is really the mounted logical volume file system? As usual with UNIX/Linux, there's more than one way to see what your mounted filesystems are. Two common examples (these from an i386 system): $ mount /dev/root on / type ext3 (rw) none on /dev type devfs (rw) none on /proc type proc (rw) /dev/hda2 on /usr type ext3 (rw) none on /dev/shm type tmpfs (rw) /dev/vg0/newhome on /home type ext3 (rw) /dev/hdc1 on /mnt/hdc1 type ext3 (rw) /mnt/hdc1/ISOs on /home/samba/ISOs type none (rw,bind) none on /proc/bus/usb type usbfs (rw) $ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 1921156 1305408518156 72% / /dev/hda2 9614148 3002532 6123240 33% /usr none 516288 0516288 0% /dev/shm /dev/vg0/newhome 41284928 26131060 13056716 67% /home /dev/hdc176922968 48704152 24311284 67% /mnt/hdc1 /mnt/hdc1/ISOs 76922968 48704152 24311284 67% /home/samba/ISOs mount just tells you what's mounted where, df gives you utilisation data as well. You can see in these examples that my /home is on an LV, so you should see something very similar on your system if /home is mounted correctly. If it's not, the problem might be that /etc/fstab was not updated after the LV was created and formatted. You'll need to fix that, but not before moving the existing /home into the LV (without overwriting what may already be on the LV, if it was at some stage successfully mounted). Mark has some hints on moving filesystems on linuxvm.org that might be useful to you for this. Cheers, Vic Cross -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Trouble booting a new guest
I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: suse 7.2 for s390 running on 03 processors
Is this on z/VM, or in an LPAR? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Nilson Vieira Sent: Tuesday, June 29, 2004 12:40 PM To: [EMAIL PROTECTED] Subject: suse 7.2 for s390 running on 03 processors Hi all, I have a suse 7.2 s390 set up with 02 processors running fine. The problem is when i try to put one more processor the system won´t IPL with no messages. Does anyone knows what is going on? Regards -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
How to force a java thread to take a java core dump?
I have a problem in WebSphere using the Shadow Direct client 5.1.22 driver. JDBC connections are being created and not being cleaned up. Is there a way to force a java thread to dump? I have 50 open connections to Shadow Direct, and 40+ java threads using 4.5% of the CP each, pegging my 2 IFL's. Any advise on how to make these dump so we can see what they were doing would be greatly appreciated. Thanks! -J -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
Hmm. Normally I would see some info about interface binding to eth0 which will give you an IP. Looks like you can log in as root. Can you type 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you manually perform 'init 3'? __ Ranga Nathan / CSG Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Eric Sammons [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 08:37 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to
Re: Trouble booting a new guest
You didn't post the whole of your boot messages. There may be something near the top that might be of interest. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 11:38 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
Re: Trouble booting a new guest
The guest never gets to run level 2. None of the commands are available. Because ls and other commands are not available I use echo *, from / that returns: bin dev lib linuxrc Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Ranga Nathan [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:52 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Hmm. Normally I would see some info about interface binding to eth0 which will give you an IP. Looks like you can log in as root. Can you type 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you manually perform 'init 3'? __ Ranga Nathan / CSG Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Eric Sammons [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 08:37 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if
TeamQuest announces SUSE support on z/Series
Unfortunately nothing about VM performance that I could see. http://www.linuxworld.com/story/45432.htm +--- + | Chris Little[EMAIL PROTECTED] | | Ok Dept of Human Services Data Services Division (405)522-1306 | +--- + -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
Doesn't look like everything was installed. Are you sure it completed successfully? -Original Message- From: Eric Sammons [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 30, 2004 11:54 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The guest never gets to run level 2. None of the commands are available. Because ls and other commands are not available I use echo *, from / that returns: bin dev lib linuxrc Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Ranga Nathan [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:52 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Hmm. Normally I would see some info about interface binding to eth0 which will give you an IP. Looks like you can log in as root. Can you type 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you manually perform 'init 3'? __ Ranga Nathan / CSG Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Eric Sammons [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 08:37 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets
Re: Trouble booting a new guest
I cut and paste directly from my terminal, I believe everything is there. If not I will post messages again after I attempt the build again. === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 12:48 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest You didn't post the whole of your boot messages. There may be something near the top that might be of interest. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 11:38 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple
Re: suse 7.2 for s390 running on 03 processors
It4s in lpar mode - Original Message - From: Post, Mark K [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, June 30, 2004 12:21 PM Subject: Re: suse 7.2 for s390 running on 03 processors Is this on z/VM, or in an LPAR? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Nilson Vieira Sent: Tuesday, June 29, 2004 12:40 PM To: [EMAIL PROTECTED] Subject: suse 7.2 for s390 running on 03 processors Hi all, I have a suse 7.2 s390 set up with 02 processors running fine. The problem is when i try to put one more processor the system won4t IPL with no messages. Does anyone knows what is going on? Regards -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
It would probably be easier to make sure your virtual console is spooled so that it captures everything, and you don't have to worry about stuff scrolling off the screen. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 1:14 PM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest I cut and paste directly from my terminal, I believe everything is there. If not I will post messages again after I attempt the build again. === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 12:48 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest You didn't post the whole of your boot messages. There may be something near the top that might be of interest. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 11:38 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300= /dev/dasdf1 = /boot = ext3 0301= /dev/dasdg1 = / = ext3 I can not figure out what is going on
Re: Trouble booting a new guest
Can't tell, after the install I get a message that the system will now shutdown and that I should proceed to boot using my root dasd. Which I do... At which point all appears well and then when it appears things should be moving into run level 2 it drops into the root shell, from which I can see nothing other than the 3 directories and the command linuxrc. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman David Kreuter [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 01:59 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest What initialization level does /etc/inittab say it is attempting? David Kreuter From: Linux on 390 Port on behalf of Eric Sammons Sent: Wed 6/30/2004 1:54 PM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest Here it is again, a fresh build with 0300ext2/boot 0301ext3/ 0302ext3/var 0303ext3/home Ready; T=0.01/0.02 13:50:31 ipl 300 clear hwc low level driver: can write messages hwc low level driver: can not read state change notifications hwc low level driver: can receive signal quiesce hwc low level driver: can read commands hwc low level driver: can read priority commands Linux version 2.4.19-3suse-SMP ([EMAIL PROTECTED]) (gcc version 3.2) #1 SMP Wed Nov 6 22:34:43 UTC 2002 We are running under VM (31 bit mode) This machine has an IEEE fpu On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: root=/dev/ram0 ro Highest subchannel number detected (hex) : 0023 Calibrating delay loop... 627.50 BogoMIPS Memory: 513944k/524288k available (1706k kernel code, 0k reserved, 396k data, 56 k init) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) , Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured , RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # Thoughts? === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Little, Chris [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 01:11 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Doesn't look like everything was installed. Are you sure it completed successfully? -Original Message- From: Eric Sammons
Re: NFS Help - RHEL3 Linux client, VM server
I searched the TCP/IP manuals, and didn't find any references to vmlogin. Is MOUNTPW the same thing? MOUNTPW and MOUNT both have parameters to specify VM userids and passwords. Dennis O'Brien Bank of America Mr. Gorbachev, tear down this wall! -- Ronald Reagan, 12 Jun 1987 -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of David Boyes Sent: Monday, May 24, 2004 18:49 To: [EMAIL PROTECTED] Subject: Re: NFS Help - RHEL3 Linux client, VM server Can someone point me in the direction I need to go to get my RHEL3 NFS client to connect to the VM NFS server? You need to compile and run mvslogin/vmlogin.c which are provided with the CMS NFS server. See the VM TCPIP Planning and Configuraiton Guide and the VM TCPIP Users Guide for all the gory details. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: NFS Help - RHEL3 Linux client, VM server
I know nothing, but from the email below, vmlogin.c is not a command, but it is a C file that needs to be compiled. I would suggest looking in the indexes of the manuals below for vmlogin or vmlogin.c. This world is a confusing place for those not used to it. Be careful out there! - Hill Street Blues _/) Tom Shilson ~GEDW VM System Services Aloha Tel: 651-733-7591 tshilson at mmm dot com Fax: 651-736-7689 O'Brien, Dennis L Dennis.L.O'Brien To @bankofamerica.co [EMAIL PROTECTED] m cc Sent by: Linux on 390 Port Subject [EMAIL PROTECTED] Re: NFS Help - RHEL3 Linux client, IST.EDU VM server 06/30/2004 05:30 PM Please respond to Linux on 390 Port [EMAIL PROTECTED] IST.EDU I searched the TCP/IP manuals, and didn't find any references to vmlogin. Is MOUNTPW the same thing? MOUNTPW and MOUNT both have parameters to specify VM userids and passwords. Dennis O'Brien Bank of America Mr. Gorbachev, tear down this wall! -- Ronald Reagan, 12 Jun 1987 -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of David Boyes Sent: Monday, May 24, 2004 18:49 To: [EMAIL PROTECTED] Subject: Re: NFS Help - RHEL3 Linux client, VM server Can someone point me in the direction I need to go to get my RHEL3 NFS client to connect to the VM NFS server? You need to compile and run mvslogin/vmlogin.c which are provided with the CMS NFS server. See the VM TCPIP Planning and Configuraiton Guide and the VM TCPIP Users Guide for all the gory details. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: NFS Help - RHEL3 Linux client, VM server
I searched all five z/VM 4.4.0 TCP/IP manuals for vmlogin and vmlogin.c, but got no hits. MOUNTPW is a C program on TCPMAINT 592. There are some other C programs on that disk, but nothing with a name remotely like vmlogin. Dennis O'Brien Bank of America Mr. Gorbachev, tear down this wall! -- Ronald Reagan, 12 Jun 1987 -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of Tom Shilson Sent: Wednesday, June 30, 2004 16:12 To: [EMAIL PROTECTED] Subject: Re: NFS Help - RHEL3 Linux client, VM server I know nothing, but from the email below, vmlogin.c is not a command, but it is a C file that needs to be compiled. I would suggest looking in the indexes of the manuals below for vmlogin or vmlogin.c. This world is a confusing place for those not used to it. Be careful out there! - Hill Street Blues _/) Tom Shilson ~GEDW VM System Services Aloha Tel: 651-733-7591 tshilson at mmm dot com Fax: 651-736-7689 O'Brien, Dennis L Dennis.L.O'Brien To @bankofamerica.co [EMAIL PROTECTED] m cc Sent by: Linux on 390 Port Subject [EMAIL PROTECTED] Re: NFS Help - RHEL3 Linux client, IST.EDU VM server 06/30/2004 05:30 PM Please respond to Linux on 390 Port [EMAIL PROTECTED] IST.EDU I searched the TCP/IP manuals, and didn't find any references to vmlogin. Is MOUNTPW the same thing? MOUNTPW and MOUNT both have parameters to specify VM userids and passwords. Dennis O'Brien Bank of America Mr. Gorbachev, tear down this wall! -- Ronald Reagan, 12 Jun 1987 -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of David Boyes Sent: Monday, May 24, 2004 18:49 To: [EMAIL PROTECTED] Subject: Re: NFS Help - RHEL3 Linux client, VM server Can someone point me in the direction I need to go to get my RHEL3 NFS client to connect to the VM NFS server? You need to compile and run mvslogin/vmlogin.c which are provided with the CMS NFS server. See the VM TCPIP Planning and Configuraiton Guide and the VM TCPIP Users Guide for all the gory details. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: NFS Help - RHEL3 Linux client, VM server
I defer to REAL experts. _/) Tom Shilson ~GEDW VM System Services Aloha Tel: 651-733-7591 tshilson at mmm dot com Fax: 651-736-7689 O'Brien, Dennis L Dennis.L.O'Brien To @bankofamerica.co [EMAIL PROTECTED] m cc Sent by: Linux on 390 Port Subject [EMAIL PROTECTED] Re: NFS Help - RHEL3 Linux client, IST.EDU VM server 06/30/2004 06:19 PM Please respond to Linux on 390 Port [EMAIL PROTECTED] IST.EDU I searched all five z/VM 4.4.0 TCP/IP manuals for vmlogin and vmlogin.c, but got no hits. MOUNTPW is a C program on TCPMAINT 592. There are some other C programs on that disk, but nothing with a name remotely like vmlogin. Dennis O'Brien Bank of America -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
On Wed, Jun 30, 2004 at 12:53:56PM -0400, Eric Sammons wrote: The guest never gets to run level 2. None of the commands are available. Because ls and other commands are not available I use echo *, from / that returns: bin dev lib linuxrc Clearly it has booted to the initrd and given you a shell prompt rather than doing what it should. Probably it should be running that linuxrc script (or binary), which should be loading the dasd driver kernel modules, mounting the real root filesystem, and pivoting to that. Details depend on the particular distro and version you are running though. Could be a problem with the kernel parameters; for example having init=/bin/sh might give you this effect. Richard Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Ranga Nathan [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:52 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Hmm. Normally I would see some info about interface binding to eth0 which will give you an IP. Looks like you can log in as root. Can you type 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you manually perform 'init 3'? __ Ranga Nathan / CSG Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Eric Sammons [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 08:37 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it. -- Richard Feynman Post, Mark K [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux
Linux on Mainframe
Does anybody know how I get the SUSE Linux 8.0 Administration Guide for s/390. We can't find it at the SUSE web site. Thanks, -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390