Re: Reconnect
tks Sam From: Sam Bass To: LINUX-390@VM.MARIST.EDU Date: 12/12/2014 09:05 AM Subject:Re: Reconnect Sent by:Linux on 390 Port This is a VM PTF to address this, missing interrupt problem. Apply VM65501 and VM65416 Sam Bass -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ron Wells Sent: Friday, December 12, 2014 7:48 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Reconnect Found out VM itself was having problems/it crashed trying figure out was going on..reipl'd.. From: Patrick Lafargue To: LINUX-390@VM.MARIST.EDU Date: 12/11/2014 04:50 PM Subject:Re: Reconnect Sent by:Linux on 390 Port Are you sure your VM is in a normal state? It seems to hang cpu in disable wait for instance - Message d'origine - De : Ron Wells [mailto:ron.we...@springleaf.com] Envoyé : Thursday, December 11, 2014 09:58 PM Romance Standard Time À : LINUX-390@VM.MARIST.EDU Objet : Re: Reconnect not an ICC connection...the console/icc still works fine.. my tn3270..wait long enough and comes back...vm/logo...then log back in From: "Poirier, James" To: LINUX-390@VM.MARIST.EDU Date: 12/11/2014 02:25 PM Subject:Re: Reconnect Sent by:Linux on 390 Port Ron, If your emulator is assigned a specific slot on a HMC/ICC then the slot on the ICC has to be reset. If you are going directly into TCPIP and there are no specific exits that assign you to a particular terminal then I am not sure what your problem could be. Usually the first case above is the problem. Jim P. On 12/11/14, 1:49 PM, "Ron Wells" wrote: >missing what you are saying...Dif port?? >other than 23 ?? > > > >From: "Poirier, James" >To: LINUX-390@VM.MARIST.EDU >Date: 12/11/2014 12:07 PM >Subject:Re: Reconnect >Sent by:Linux on 390 Port > > > >Ron, > >Not sure how your emulator is set up, but you will have to point your >emulator to a different port, then do LOGON x here. > > Jim P. > >On 12/11/14, 12:34 PM, "Ron Wells" wrote: > >>when tn3270 for the VM started...I get a blank screen >> >> >> >> >>From: "Poirier, James" >>To: LINUX-390@VM.MARIST.EDU >>Date: 12/11/2014 10:11 AM >>Subject:Re: Reconnect >>Sent by:Linux on 390 Port >> >> >> >>Ron, >> >> Try LOGON xxx here xx= user-id or machine name >> >> Jim P. >> >>On 12/11/14, 10:25 AM, "Ron Wells" wrote: >> >>>Any one have an idea or have procedure on how to logon/reconnect to a >>virt >>>machine. >>>Have logged in..lost connection--my tn3270..tried to log back in to >virt. >>>machine I was logged into but keep timeing out rtying to connect?? >>> >>>-- >>>Email Disclaimer >>>This E-mail contains confidential information belonging to the >>>sender, which may be legally privileged information. This information >>>is intended only for the use of the individual or entity addressed >>>above. If you are not the intended recipient, or an employee or >>>agent responsible for delivering it to the intended recipient, you are >>>hereby notified that any disclosure, copying, distribution, or the >>>taking of any action in reliance on the contents of the E-mail or >>>attached files is strictly prohibited. >>> >>>-- >>>For LINUX-390 subscribe / signoff / archive access instructions, >>>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>>visit >>>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>>-- >>>For more information on Linux on System z, visit >>>http://wiki.linuxvm.org/ >> >>-- >>For LINUX-390 subscribe / signoff / archive access instructions, >>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>visit >>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>-- >>For more information on Linux on System z, visit >>http://wiki.linuxvm.org/ >> >>-- >>Email Disclaimer >>This E-mail contains confidential information belonging to the >>sender, which may be legally privileged information. This information >>is intended only for the use of the individual or entity addressed >>above. If you are not the intended recipient, or an employee or >>agent responsible for delivering it to the intended recipient, you are >>hereby notified that any disclosure, copying, distribution, or the >>taking of any action in reliance on the contents of the E-mail or >>attached files is strictly prohibited. >> >>-- >>For LINUX-390 subscribe / signoff / archive access instructions, >>send email
Re: Question on The Virtualization Cookbook for IVM z/VM V6.3
Mike, As soon as I changed from USER LNXMAINT LXPSEGLI 64M 128M G INCLUDE TCPCMSU LINK TCPMAINT 592 592 RR MDISK 0191 3390 0001 0020 VM1090 MR READ WRITE MULTIPLE MDISK 0192 3390 0021 0500 VM1090 MR ALL WRITE MULTIPLE To USER LNXMAINT LXPSEGLI 64M 128M G INCLUDE TCPCMSU LINK TCPMAINT 592 592 RR MDISK 0191 3390 0001 0020 VM1090 MR PASSWORD PASSWORD PASSWORD MDISK 0192 3390 0021 0500 VM1090 MR PASSWORD PASSWORD PASSWORD * It works. Ray -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Michael MacIsaac Sent: Friday, December 12, 2014 6:44 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Question on The Virtualization Cookbook for IVM z/VM V6.3 Email sent from outside of PSEG. Use caution before using links/attachments. Ray, When I wrote: > Yes, each Linux system will need its own disk. Sorry, I meant that for LNXADMIN (the sysadmin's Linux on each member LPAR), not LNXMAINT (the CMS machine designed for a common 191 disk on all Linux virtual machines). If you make LNXMAINT an IDENTITY, you will have to maintain four common disks, not just one. Why make things more complex? I would recommend going back to the original USER directory entry. If you are getting an error on the other members, post the error message(s) here and we'll figure it out. -Mike On Thu, Dec 11, 2014 at 3:37 PM, Chu, Raymond wrote: > > Mike, > > This is how I modified the user direct file and it worked but I would > like your assistance to confirm what and how to make it better. > > Step 1 - modified the LNXMAINT from > > USER LNXMAINT PASSWORD 64M 128M G > INCLUDE TCPCMSU > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1090 MR READ WRITE MULTIPLE MDISK 0192 > 3390 0021 0500 VM1090 MR ALL WRITE MULTIPLE > > > To > > IDENTITY LNXMAINT PASSWORD 64M 128M G > INCLUDE TCPCMSU > BUILD ON NAVY USING SUBCONFIG LNXMNT-1 > BUILD ON AIRFORCE USING SUBCONFIG LNXMNT-2 > BUILD ON ARMY USING SUBCONFIG LNXMNT-3 > BUILD ON MARINES USING SUBCONFIG LNXMNT-4 > SUBCONFIG LNXMNT-1 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1090 MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM1090 MR PASSWORD PASSWORD PASSWORD > SUBCONFIG LNXMNT-2 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1526 MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM1526 MR PASSWORD PASSWORD PASSWORD > SUBCONFIG LNXMNT-3 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM149F MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM149F MR PASSWORD PASSWORD PASSWORD > SUBCONFIG LNXMNT-4 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1528 MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM1528 MR PASSWORD PASSWORD PASSWORD > * > Step 2 - Shutdown the LNXADMIN (Linux image) with halt command Step 3 > - Make sure LNXADMIN be logged off from the current LPAR let's day > zVM3 > Step 4 - Logon to zVM2 LPAR as LNXADMIN and start up the Linux image > Step 5 - Logon to the LNXADMIN in Linux and run the famous "clone" script. > It picks the expected specified range of macprefix. > > It works. > > Here is the question. It seems the LNXADMIN and RH65GOLD are only be > picked up from the first zVM1 (DISK VM10901) and other disks (VM1526, > VM149F and VM1528) are not used at all. I would like to save some > DASDs and use them for something else. It there a way to work around them. > > Thanks, > > Ray > > > -Original Message- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Michael MacIsaac > Sent: Thursday, December 11, 2014 2:27 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Question on The Virtualization Cookbook for IVM z/VM V6.3 > > Email sent from outside of PSEG. Use caution before using > links/attachments. > > > Ray, > > > But I am unable to use zVM2, zVM3 and zVM4 to do any cloning at all. > What error are you getting? > > The golden image is a USER, not an IDENTITY, right? If the minidisk > volume(s) of the golden image are available to all member systems, > then you should be OK. > > -Mike > > On Thu, Dec 11, 2014 at 12:14 PM, Chu, Raymond > wrote: > > > Mike, > > > > I actually have the following set up shown below: > > > > IDENTITY LNXADMIN PASSWORD 256M 1G BG INCLUDE LNXDFLT > > BUILD ON zVM1 USING SUBCONFIG LNXADM-1 > > BUILD ON zVM2 USING SUBCONFIG LNXADM-2 > > BUILD ON zVM3 USING SUBCONFIG LNXADM-3 > > BUILD ON zVM4 USING SUBCONFIG LNXADM-4 > > OPTION LNKNOPAS > > SUBCONFIG LNXADM-1 > >MDISK 0100 3390 0001 10016 VM1091
Re: Reconnect
This is a VM PTF to address this, missing interrupt problem. Apply VM65501 and VM65416 Sam Bass -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ron Wells Sent: Friday, December 12, 2014 7:48 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Reconnect Found out VM itself was having problems/it crashed trying figure out was going on..reipl'd.. From: Patrick Lafargue To: LINUX-390@VM.MARIST.EDU Date: 12/11/2014 04:50 PM Subject:Re: Reconnect Sent by:Linux on 390 Port Are you sure your VM is in a normal state? It seems to hang cpu in disable wait for instance - Message d'origine - De : Ron Wells [mailto:ron.we...@springleaf.com] Envoyé : Thursday, December 11, 2014 09:58 PM Romance Standard Time À : LINUX-390@VM.MARIST.EDU Objet : Re: Reconnect not an ICC connection...the console/icc still works fine.. my tn3270..wait long enough and comes back...vm/logo...then log back in From: "Poirier, James" To: LINUX-390@VM.MARIST.EDU Date: 12/11/2014 02:25 PM Subject:Re: Reconnect Sent by:Linux on 390 Port Ron, If your emulator is assigned a specific slot on a HMC/ICC then the slot on the ICC has to be reset. If you are going directly into TCPIP and there are no specific exits that assign you to a particular terminal then I am not sure what your problem could be. Usually the first case above is the problem. Jim P. On 12/11/14, 1:49 PM, "Ron Wells" wrote: >missing what you are saying...Dif port?? >other than 23 ?? > > > >From: "Poirier, James" >To: LINUX-390@VM.MARIST.EDU >Date: 12/11/2014 12:07 PM >Subject:Re: Reconnect >Sent by:Linux on 390 Port > > > >Ron, > >Not sure how your emulator is set up, but you will have to point your >emulator to a different port, then do LOGON x here. > > Jim P. > >On 12/11/14, 12:34 PM, "Ron Wells" wrote: > >>when tn3270 for the VM started...I get a blank screen >> >> >> >> >>From: "Poirier, James" >>To: LINUX-390@VM.MARIST.EDU >>Date: 12/11/2014 10:11 AM >>Subject:Re: Reconnect >>Sent by:Linux on 390 Port >> >> >> >>Ron, >> >> Try LOGON xxx here xx= user-id or machine name >> >> Jim P. >> >>On 12/11/14, 10:25 AM, "Ron Wells" wrote: >> >>>Any one have an idea or have procedure on how to logon/reconnect to a >>virt >>>machine. >>>Have logged in..lost connection--my tn3270..tried to log back in to >virt. >>>machine I was logged into but keep timeing out rtying to connect?? >>> >>>-- >>>Email Disclaimer >>>This E-mail contains confidential information belonging to the >>>sender, which may be legally privileged information. This information >>>is intended only for the use of the individual or entity addressed >>>above. If you are not the intended recipient, or an employee or >>>agent responsible for delivering it to the intended recipient, you are >>>hereby notified that any disclosure, copying, distribution, or the >>>taking of any action in reliance on the contents of the E-mail or >>>attached files is strictly prohibited. >>> >>>-- >>>For LINUX-390 subscribe / signoff / archive access instructions, >>>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>>visit >>>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>>-- >>>For more information on Linux on System z, visit >>>http://wiki.linuxvm.org/ >> >>-- >>For LINUX-390 subscribe / signoff / archive access instructions, >>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>visit >>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>-- >>For more information on Linux on System z, visit >>http://wiki.linuxvm.org/ >> >>-- >>Email Disclaimer >>This E-mail contains confidential information belonging to the >>sender, which may be legally privileged information. This information >>is intended only for the use of the individual or entity addressed >>above. If you are not the intended recipient, or an employee or >>agent responsible for delivering it to the intended recipient, you are >>hereby notified that any disclosure, copying, distribution, or the >>taking of any action in reliance on the contents of the E-mail or >>attached files is strictly prohibited. >> >>-- >>For LINUX-390 subscribe / signoff / archive access instructions, >>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>visit >>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>--
Re: Reconnect
Found out VM itself was having problems/it crashed trying figure out was going on..reipl'd.. From: Patrick Lafargue To: LINUX-390@VM.MARIST.EDU Date: 12/11/2014 04:50 PM Subject:Re: Reconnect Sent by:Linux on 390 Port Are you sure your VM is in a normal state? It seems to hang cpu in disable wait for instance - Message d'origine - De : Ron Wells [mailto:ron.we...@springleaf.com] Envoyé : Thursday, December 11, 2014 09:58 PM Romance Standard Time À : LINUX-390@VM.MARIST.EDU Objet : Re: Reconnect not an ICC connection...the console/icc still works fine.. my tn3270..wait long enough and comes back...vm/logo...then log back in From: "Poirier, James" To: LINUX-390@VM.MARIST.EDU Date: 12/11/2014 02:25 PM Subject:Re: Reconnect Sent by:Linux on 390 Port Ron, If your emulator is assigned a specific slot on a HMC/ICC then the slot on the ICC has to be reset. If you are going directly into TCPIP and there are no specific exits that assign you to a particular terminal then I am not sure what your problem could be. Usually the first case above is the problem. Jim P. On 12/11/14, 1:49 PM, "Ron Wells" wrote: >missing what you are saying...Dif port?? >other than 23 ?? > > > >From: "Poirier, James" >To: LINUX-390@VM.MARIST.EDU >Date: 12/11/2014 12:07 PM >Subject:Re: Reconnect >Sent by:Linux on 390 Port > > > >Ron, > >Not sure how your emulator is set up, but you will have to point your >emulator to a different port, then do LOGON x here. > > Jim P. > >On 12/11/14, 12:34 PM, "Ron Wells" wrote: > >>when tn3270 for the VM started...I get a blank screen >> >> >> >> >>From: "Poirier, James" >>To: LINUX-390@VM.MARIST.EDU >>Date: 12/11/2014 10:11 AM >>Subject:Re: Reconnect >>Sent by:Linux on 390 Port >> >> >> >>Ron, >> >> Try LOGON xxx here xx= user-id or machine name >> >> Jim P. >> >>On 12/11/14, 10:25 AM, "Ron Wells" wrote: >> >>>Any one have an idea or have procedure on how to logon/reconnect to a >>virt >>>machine. >>>Have logged in..lost connection--my tn3270..tried to log back in to >virt. >>>machine I was logged into but keep timeing out rtying to connect?? >>> >>>-- >>>Email Disclaimer >>>This E-mail contains confidential information belonging to the >>>sender, which may be legally privileged information. This information >>>is intended only for the use of the individual or entity addressed >>>above. If you are not the intended recipient, or an employee or >>>agent responsible for delivering it to the intended recipient, you are >>>hereby notified that any disclosure, copying, distribution, or the >>>taking of any action in reliance on the contents of the E-mail or >>>attached files is strictly prohibited. >>> >>>-- >>>For LINUX-390 subscribe / signoff / archive access instructions, >>>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>>visit >>>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>>-- >>>For more information on Linux on System z, visit >>>http://wiki.linuxvm.org/ >> >>-- >>For LINUX-390 subscribe / signoff / archive access instructions, >>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>visit >>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>-- >>For more information on Linux on System z, visit >>http://wiki.linuxvm.org/ >> >>-- >>Email Disclaimer >>This E-mail contains confidential information belonging to the >>sender, which may be legally privileged information. This information >>is intended only for the use of the individual or entity addressed >>above. If you are not the intended recipient, or an employee or >>agent responsible for delivering it to the intended recipient, you are >>hereby notified that any disclosure, copying, distribution, or the >>taking of any action in reliance on the contents of the E-mail or >>attached files is strictly prohibited. >> >>-- >>For LINUX-390 subscribe / signoff / archive access instructions, >>send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >>visit >>http://www.marist.edu/htbin/wlvindex?LINUX-390 >>-- >>For more information on Linux on System z, visit >>http://wiki.linuxvm.org/ > >-- >For LINUX-390 subscribe / signoff / archive access instructions, >send email to lists...@vm.marist.edu with the
Re: Question on The Virtualization Cookbook for IVM z/VM V6.3
Ray, When I wrote: > Yes, each Linux system will need its own disk. Sorry, I meant that for LNXADMIN (the sysadmin's Linux on each member LPAR), not LNXMAINT (the CMS machine designed for a common 191 disk on all Linux virtual machines). If you make LNXMAINT an IDENTITY, you will have to maintain four common disks, not just one. Why make things more complex? I would recommend going back to the original USER directory entry. If you are getting an error on the other members, post the error message(s) here and we'll figure it out. -Mike On Thu, Dec 11, 2014 at 3:37 PM, Chu, Raymond wrote: > > Mike, > > This is how I modified the user direct file and it worked but I would like > your assistance to confirm what and how to make it better. > > Step 1 - modified the LNXMAINT from > > USER LNXMAINT PASSWORD 64M 128M G > INCLUDE TCPCMSU > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1090 MR READ WRITE MULTIPLE > MDISK 0192 3390 0021 0500 VM1090 MR ALL WRITE MULTIPLE > > > To > > IDENTITY LNXMAINT PASSWORD 64M 128M G > INCLUDE TCPCMSU > BUILD ON NAVY USING SUBCONFIG LNXMNT-1 > BUILD ON AIRFORCE USING SUBCONFIG LNXMNT-2 > BUILD ON ARMY USING SUBCONFIG LNXMNT-3 > BUILD ON MARINES USING SUBCONFIG LNXMNT-4 > SUBCONFIG LNXMNT-1 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1090 MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM1090 MR PASSWORD PASSWORD PASSWORD > SUBCONFIG LNXMNT-2 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1526 MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM1526 MR PASSWORD PASSWORD PASSWORD > SUBCONFIG LNXMNT-3 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM149F MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM149F MR PASSWORD PASSWORD PASSWORD > SUBCONFIG LNXMNT-4 > LINK TCPMAINT 592 592 RR > MDISK 0191 3390 0001 0020 VM1528 MR PASSWORD PASSWORD PASSWORD > MDISK 0192 3390 0021 0500 VM1528 MR PASSWORD PASSWORD PASSWORD > * > Step 2 - Shutdown the LNXADMIN (Linux image) with halt command > Step 3 - Make sure LNXADMIN be logged off from the current LPAR let's day > zVM3 > Step 4 - Logon to zVM2 LPAR as LNXADMIN and start up the Linux image > Step 5 - Logon to the LNXADMIN in Linux and run the famous "clone" script. > It picks the expected specified range of macprefix. > > It works. > > Here is the question. It seems the LNXADMIN and RH65GOLD are only be > picked up from the first zVM1 (DISK VM10901) and other disks (VM1526, > VM149F and VM1528) are not used at all. I would like to save some DASDs > and use them for something else. It there a way to work around them. > > Thanks, > > Ray > > > -Original Message- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Michael MacIsaac > Sent: Thursday, December 11, 2014 2:27 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Question on The Virtualization Cookbook for IVM z/VM V6.3 > > Email sent from outside of PSEG. Use caution before using > links/attachments. > > > Ray, > > > But I am unable to use zVM2, zVM3 and zVM4 to do any cloning at all. > What error are you getting? > > The golden image is a USER, not an IDENTITY, right? If the minidisk > volume(s) of the golden image are available to all member systems, then > you should be OK. > > -Mike > > On Thu, Dec 11, 2014 at 12:14 PM, Chu, Raymond > wrote: > > > Mike, > > > > I actually have the following set up shown below: > > > > IDENTITY LNXADMIN PASSWORD 256M 1G BG > > INCLUDE LNXDFLT > > BUILD ON zVM1 USING SUBCONFIG LNXADM-1 > > BUILD ON zVM2 USING SUBCONFIG LNXADM-2 > > BUILD ON zVM3 USING SUBCONFIG LNXADM-3 > > BUILD ON zVM4 USING SUBCONFIG LNXADM-4 > > OPTION LNKNOPAS > > SUBCONFIG LNXADM-1 > >MDISK 0100 3390 0001 10016 VM1091 MR PASSWORD PASSWORD PASSWORD > >MDISK 0101 3390 0521 9496 VM1090 MR PASSWORD PASSWORD PASSWORD > > SUBCONFIG LNXADM-2 > >MDISK 0100 3390 0001 10016 VM1525 MR PASSWORD PASSWORD PASSWORD > >MDISK 0101 3390 0521 9496 VM1526 MR PASSWORD PASSWORD PASSWORD > > SUBCONFIG LNXADM-3 > >MDISK 0100 3390 0001 10016 VM149E MR PASSWORD PASSWORD PASSWORD > >MDISK 0101 3390 0521 9496 VM149F MR PASSWORD PASSWORD PASSWORD > > SUBCONFIG LNXADM-4 > >MDISK 0100 3390 0001 10016 VM1527 MR PASSWORD PASSWORD PASSWORD > >MDISK 0101 3390 0521 9496 VM1528 MR PASSWORD PASSWORD PASSWORD > > > > It works great to use the zVM1 to do cloning and I can create zLinux z > > Images from the zVM1 LPAR. But I am unable to use zVM2, zVM3 and zVM4 > > to do any cloning at all. > > > > I also cloned MDISK 100 (VM1091) of zVM1 to VM1525, VM149E and VM1527 > > and MDISK 101 (VM1090) of zVM1 to VM1526, VM149F and VM1528. > > Understood that the MISK 101 started at 521 because 1 to 520 were used > > by LNXMAINT for two virtual mode A and D for SWAPGEN, RH65GOLD and > > LNXADMIN parameters and configurations and so on. > > > > I have been
