Re: Attach OSA express3 to a guest

2010-08-02 Thread Berry van Sleeuwen 
Hi Mark,

Thank you, after reboot the network has been started correctly.

To make you smile, now our client noted the java 1.5 and tomcat5 but he
realy wants java1.6. and tomcat6. So yes, i'm pulling SLES11 SP1 at this
moment.

Regards, Berry.

Op 30-07-10 20:59, Mark Post schreef:
>
> It looks like that part of the support didn't make it into SP2, only SP3 and 
> later.  Since you're running an out of service system anyway, you could just 
> make this update:
>
>
> Mark Post
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> --
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>
>
>

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-30 Thread Mark Post 
>>> On 7/30/2010 at 08:30 AM, "van Sleeuwen, Berry"
 wrote: 
> Hi Mark,
> 
> It didn't work after we setup with "QETH_PORTNO=1". To verify I tried to
> enable port 1 online as descibed in the Device driver manual. That did
> the trick. So we can use port1 on the OSA. But once we reboot the
> linuxguest will be using port0 again. How can we make sure it is
> correctly configured after a reboot?

It looks like that part of the support didn't make it into SP2, only SP3 and 
later.  Since you're running an out of service system anyway, you could just 
make this update:
--- /etc/sysconfig/hardware/scripts/hwup-qeth   2010-07-30 14:44:26.0 
-0400
+++ /etc/sysconfig/hardware/scripts/hwup-qeth  2009-09-05 
07:51:01.0 -0400
@@ -57,6 +57,13 @@
echo 1 > $_ccwgroup_dir/layer2
fi
fi
+   # Choose local port number
+   if [ -w "$_ccwgroup_dir/portno" ] && [ "$QETH_PORTNO" ]; then
+   if [ "$QETH_PORTNO" -gt "0" ]; then
+   message_n "(Port $QETH_PORTNO) "
+   echo $QETH_PORTNO >$_ccwgroup_dir/portno
+   fi
+   fi
# Set additional options
if [ "$QETH_OPTIONS" ]; then
for opt in $QETH_OPTIONS; do

There won't be any future maintenance coming along to wipe out the change.  
You'd be better off upgrading to SP3, however.


Mark Post

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-30 Thread van Sleeuwen, Berry 
Hi Mark,

It didn't work after we setup with "QETH_PORTNO=1". To verify I tried to
enable port 1 online as descibed in the Device driver manual. That did
the trick. So we can use port1 on the OSA. But once we reboot the
linuxguest will be using port0 again. How can we make sure it is
correctly configured after a reboot?

Current config:

nlzlx119:/mnt/etc/sysconfig/hardware # cat hwcfg-qeth-bus-ccw-0.0.0f00
CCW_CHAN_IDS='0.0.0f00 0.0.0f01 0.0.0f02'
CCW_CHAN_MODE='OSACPLUS'
CCW_CHAN_NUM='3'
MODULE='qeth'
MODULE_OPTIONS=''
QETH_PORTNO='1'
SCRIPTDOWN='hwdown-ccw'
SCRIPTUP='hwup-ccw'
SCRIPTUP_ccw='hwup-ccw'
SCRIPTUP_ccwgroup='hwup-qeth'
STARTMODE='auto'

nlzlx119:/mnt/etc/sysconfig/network # cat ifcfg-qeth-bus-ccw-0.0.0f00
BOOTPROTO=static
BROADCAST=''
IPADDR=194.4.241.190
MTU=''
NETMASK=255.255.255.0
NETWORK=194.4.241.0
STARTMODE='onboot'
_nm_name=qeth-bus-ccw-0.0.0f00

Btw. Is yast as smart as to display options only when they are
available? I tried the network config on a system that doesn't use OSA
so it has no ports available. When I run yast on the guest with the OSA,
and therfore with two ports available, should I get the portno option
only at that time?

Regards, Berry.
 

-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Mark Post
Sent: donderdag 29 juli 2010 1:47
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Attach OSA express3 to a guest


It's not portno, it would be QETH_PORTNO='1'


Mark Post

--
For LINUX-390 subscribe / signoff / archive access instructions, send
email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/


--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
ÿþDit bericht is vertrouwelijk en kan 
geheime informatie bevatten enkel

bestemd voor de geadresseerde. Indien 
dit bericht niet voor u is bestemd,

verzoeken wij u dit onmiddellijk aan 
ons te melden en het bericht te

vernietigen.

Aangezien de integriteit van het 
bericht niet veilig gesteld is middels

verzending via internet, kan Atos 
Origin niet aansprakelijk worden 
gehouden

voor de inhoud daarvan.

Hoewel wij ons inspannen een virusvrij 
netwerk te hanteren, geven

wij geen enkele garantie dat dit 
bericht virusvrij is, noch aanvaarden 
wij

enige aansprakelijkheid voor de 
mogelijke aanwezigheid van een virus in 
dit

bericht.

 

Op al onze rechtsverhoudingen, 
aanbiedingen en overeenkomsten 
waaronder

Atos Origin goederen en/of diensten 
levert zijn met uitsluiting van alle

andere voorwaarden de 
Leveringsvoorwaarden van Atos Origin 
van toepassing.

Deze worden u op aanvraag direct 
kosteloos toegezonden.

 

This e-mail and the documents attached 
are confidential and intended solely

for the addressee; it may also be 
privileged. If you receive this e-mail

in error, please notify the sender 
immediately and destroy it.

As its integrity cannot be secured on 
the Internet, the Atos Origin group

liability cannot be triggered for the 
message

Re: Attach OSA express3 to a guest

2010-07-29 Thread van Sleeuwen, Berry 
We have now started the guest successfully on port1.

Thanks. Berry. 

-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Mark Post
Sent: donderdag 29 juli 2010 1:47
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Attach OSA express3 to a guest

>>> On 7/28/2010 at 07:12 AM, "van Sleeuwen, Berry"
 wrote: 
> When I look at yast I can select advanced for this nic.  But in there 
> there is no field for port number.

I haven't looked at an SP2 system since it's been off support for a
while.  Perhaps the YaST support wasn't there yet.

> Should I specify portno in the
> options field?

I would not.

> Or perhaps a slightly different configuration path. The portno=1 
> option should go into a configuration file. How should this be 
> specified? If I had to guess, I would enter "portno=1" into 
> /etc/sysconfig/hardware/hwcfg-qeth-bus-ccw-0.0.0f00. Am I correct?

It's not portno, it would be QETH_PORTNO='1'


Mark Post

--
For LINUX-390 subscribe / signoff / archive access instructions, send
email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/


--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
ÿþDit bericht is vertrouwelijk en kan 
geheime informatie bevatten enkel

bestemd voor de geadresseerde. Indien 
dit bericht niet voor u is bestemd,

verzoeken wij u dit onmiddellijk aan 
ons te melden en het bericht te

vernietigen.

Aangezien de integriteit van het 
bericht niet veilig gesteld is middels

verzending via internet, kan Atos 
Origin niet aansprakelijk worden 
gehouden

voor de inhoud daarvan.

Hoewel wij ons inspannen een virusvrij 
netwerk te hanteren, geven

wij geen enkele garantie dat dit 
bericht virusvrij is, noch aanvaarden 
wij

enige aansprakelijkheid voor de 
mogelijke aanwezigheid van een virus in 
dit

bericht.

 

Op al onze rechtsverhoudingen, 
aanbiedingen en overeenkomsten 
waaronder

Atos Origin goederen en/of diensten 
levert zijn met uitsluiting van alle

andere voorwaarden de 
Leveringsvoorwaarden van Atos Origin 
van toepassing.

Deze worden u op aanvraag direct 
kosteloos toegezonden.

 

This e-mail and the documents attached 
are confidential and intended solely

for the addressee; it may also be 
privileged. If you receive this e-mail

in error, please notify the sender 
immediately and destroy it.

As its integrity cannot be secured on 
the Internet, the Atos Origin group

liability cannot be triggered for the 
message content. Although the

sender endeavours to maintain a 
computer virus-free network, the sender

does not warrant that this transmission 
is virus-free and will not be

liable for any damages resulting from 
any virus transmitted.

 

On all offers and agreements under 
which Atos Origin supplies

Re: Attach OSA express3 to a guest

2010-07-28 Thread Mark Post 
>>> On 7/28/2010 at 07:12 AM, "van Sleeuwen, Berry"
 wrote: 
> When I look at yast I can select advanced for this nic.  But in there
> there is no field for port number.

I haven't looked at an SP2 system since it's been off support for a while.  
Perhaps the YaST support wasn't there yet.

> Should I specify portno in the
> options field?

I would not.

> Or perhaps a slightly different configuration path. The portno=1 option
> should go into a configuration file. How should this be specified? If I
> had to guess, I would enter "portno=1" into
> /etc/sysconfig/hardware/hwcfg-qeth-bus-ccw-0.0.0f00. Am I correct?

It's not portno, it would be QETH_PORTNO='1'


Mark Post

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-28 Thread van Sleeuwen, Berry 
When I look at yast I can select advanced for this nic.  But in there
there is no field for port number. Should I specify portno in the
options field?

Or perhaps a slightly different configuration path. The portno=1 option
should go into a configuration file. How should this be specified? If I
had to guess, I would enter "portno=1" into
/etc/sysconfig/hardware/hwcfg-qeth-bus-ccw-0.0.0f00. Am I correct?

Regards, Berry.

-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Mark Post
Sent: dinsdag 27 juli 2010 19:36
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Attach OSA express3 to a guest

>>> On 7/27/2010 at 05:55 AM, "van Sleeuwen, Berry"
 wrote: 
> But how can we
> configure the linux guest to use port 1? Either in VM or in the 
> linuxguest. Where can I find this in the documentation?

On SLES 10 (SP2 and higher):
yast -> Network Devices -> Network Card -> Edit -> Advanced -> S/390 and
set Port Number to 1.


Mark Post

--
For LINUX-390 subscribe / signoff / archive access instructions, send
email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/


--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
ÿþDit bericht is vertrouwelijk en kan 
geheime informatie bevatten enkel

bestemd voor de geadresseerde. Indien 
dit bericht niet voor u is bestemd,

verzoeken wij u dit onmiddellijk aan 
ons te melden en het bericht te

vernietigen.

Aangezien de integriteit van het 
bericht niet veilig gesteld is middels

verzending via internet, kan Atos 
Origin niet aansprakelijk worden 
gehouden

voor de inhoud daarvan.

Hoewel wij ons inspannen een virusvrij 
netwerk te hanteren, geven

wij geen enkele garantie dat dit 
bericht virusvrij is, noch aanvaarden 
wij

enige aansprakelijkheid voor de 
mogelijke aanwezigheid van een virus in 
dit

bericht.

 

Op al onze rechtsverhoudingen, 
aanbiedingen en overeenkomsten 
waaronder

Atos Origin goederen en/of diensten 
levert zijn met uitsluiting van alle

andere voorwaarden de 
Leveringsvoorwaarden van Atos Origin 
van toepassing.

Deze worden u op aanvraag direct 
kosteloos toegezonden.

 

This e-mail and the documents attached 
are confidential and intended solely

for the addressee; it may also be 
privileged. If you receive this e-mail

in error, please notify the sender 
immediately and destroy it.

As its integrity cannot be secured on 
the Internet, the Atos Origin group

liability cannot be triggered for the 
message content. Although the

sender endeavours to maintain a 
computer virus-free network, the sender

does not warrant that this transmission 
is virus-free and will not be

liable for any damages resulting from 
any virus transmitted.

 

On all offers and agreements under 
which Atos Origin supplies goods and/

Re: Attach OSA express3 to a guest

2010-07-28 Thread van Sleeuwen, Berry 
Thank you all. That will make the attach of OSA possible after all.

Regards, Berry.

-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of
Ursula Braun
Sent: woensdag 28 juli 2010 9:23
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Attach OSA express3 to a guest

Hi Berry,

the kernel patch has been backported to SLES10 SP2.

Regards, Ursula

On Tue, 2010-07-27 at 22:16 +0200, Berry van Sleeuwen wrote:
> Hi Mark,
>
> At the IBM devworks
> (http://www.ibm.com/developerworks/linux/linux390/development_recommen
> ded.html) I found that four-port OSA is supported with a patch against

> kernel 2.6.25. We are running in SLES10 SP2 at level 2.6.16. So does 
> our system support this option?
>
> Regards, Berry.
>
> Op 27-07-10 19:36, Mark Post schreef:
> >>>> On 7/27/2010 at 05:55 AM, "van Sleeuwen, Berry"
> >>>>
> >  wrote:
> >
> >> But how can we
> >> configure the linux guest to use port 1? Either in VM or in the 
> >> linuxguest. Where can I find this in the documentation?
> >>
> > On SLES 10 (SP2 and higher):
> > yast -> Network Devices -> Network Card -> Edit -> Advanced -> S/390

> > and set Port Number to 1.
> >
> >
> > Mark Post
> >
> > 
> > -- For LINUX-390 subscribe / signoff / archive access instructions, 
> > send email to lists...@vm.marist.edu with the message: INFO 
> > LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
> > 
> > -- For more information on Linux on System z, visit 
> > http://wiki.linuxvm.org/
> >
> >
> >
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions, send 
> email to lists...@vm.marist.edu with the message: INFO LINUX-390 or 
> visit http://www.marist.edu/htbin/wlvindex?LINUX-390
> --
> For more information on Linux on System z, visit 
> http://wiki.linuxvm.org/

--
For LINUX-390 subscribe / signoff / archive access instructions, send
email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/


--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
ÿþDit bericht is vertrouwelijk en kan 
geheime informatie bevatten enkel

bestemd voor de geadresseerde. Indien 
dit bericht niet voor u is bestemd,

verzoeken wij u dit onmiddellijk aan 
ons te melden en het bericht te

vernietigen.

Aangezien de integriteit van het 
bericht niet veilig gesteld is middels

verzending via internet, kan Atos 
Origin niet aansprakelijk worden 
gehouden

voor de inhoud daarvan.

Hoewel wij ons inspannen een virusvrij 
netwerk te hanteren, geven

wij geen enkele garantie dat dit 
bericht virusvrij is, noch aanvaarden 
wij

enige aansprakelijkheid voor de 
mogelijke aanwezigheid van een virus in 
dit

bericht.

 

Op al onze rechtsverhoudingen, 
aanbiedingen en overeenkomsten 
waaronder

Atos Origin goederen en/of diensten 
levert zijn met uitsluiting van alle

andere voorwaarden de 
Leveringsvoorwaarden van Atos Origin 
van toepassing.

Deze worden u op aanvraag direct 
kosteloos toegezonden.

Re: Attach OSA express3 to a guest

2010-07-28 Thread Ursula Braun 
Hi Berry,

the kernel patch has been backported to SLES10 SP2.

Regards, Ursula

On Tue, 2010-07-27 at 22:16 +0200, Berry van Sleeuwen wrote:
> Hi Mark,
>
> At the IBM devworks
> (http://www.ibm.com/developerworks/linux/linux390/development_recommended.html)
> I found that four-port OSA is supported with a patch against kernel
> 2.6.25. We are running in SLES10 SP2 at level 2.6.16. So does our system
> support this option?
>
> Regards, Berry.
>
> Op 27-07-10 19:36, Mark Post schreef:
>  On 7/27/2010 at 05:55 AM, "van Sleeuwen, Berry"
> 
> >  wrote:
> >
> >> But how can we
> >> configure the linux guest to use port 1? Either in VM or in the
> >> linuxguest. Where can I find this in the documentation?
> >>
> > On SLES 10 (SP2 and higher):
> > yast -> Network Devices -> Network Card -> Edit -> Advanced -> S/390
> > and set Port Number to 1.
> >
> >
> > Mark Post
> >
> > --
> > For LINUX-390 subscribe / signoff / archive access instructions,
> > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or 
> > visit
> > http://www.marist.edu/htbin/wlvindex?LINUX-390
> > --
> > For more information on Linux on System z, visit
> > http://wiki.linuxvm.org/
> >
> >
> >
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> --
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-27 Thread Berry van Sleeuwen 
Indeed, my (old) Device driver book doesn't contain the options for
this. The newest version (dated 2010) does contain what I was searching for.

Thanks, Berry.

Op 27-07-10 14:11, Quay, Jonathan (IHG) schreef:
> Look on DeveloperWorks at the Devices Drivers documentation.  There is a 
> large chapter on qeth.
>
> 
>
> From: Linux on 390 Port on behalf of van Sleeuwen, Berry
> Sent: Tue 7/27/2010 5:55 AM
> To: LINUX-390@VM.MARIST.EDU
> Subject: Attach OSA express3 to a guest
>
>
>
> Hi listers,
>
> Our linux guests connect to the vswitch. Our vswitch has been configured
> to use an OSA device on one of the ports. We have a vswitch that
> connects to port 0 and two that connect to port 1.
>
> We now have a guest that must be configured with a dedicated OSA, ie
> attach the OSA devices to the guest, using port 1. But how can we
> configure the linux guest to use port 1? Either in VM or in the
> linuxguest. Where can I find this in the documentation?
>
>
> Met vriendelijke groet/With kind regards,
> Berry van Sleeuwen
> Flight Forum 3000 5657 EW Eindhoven
>
> ( +31 (0)6 22564276
>
>
>
>
>
> Atos Origin <http://www.atosorigin.com/>
>
> MO CF SC Mainframe Services
>
>
>
>
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> --
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>
>
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> --
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>
>
>

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-27 Thread Berry van Sleeuwen 
Hi Mark,

At the IBM devworks
(http://www.ibm.com/developerworks/linux/linux390/development_recommended.html)
I found that four-port OSA is supported with a patch against kernel
2.6.25. We are running in SLES10 SP2 at level 2.6.16. So does our system
support this option?

Regards, Berry.

Op 27-07-10 19:36, Mark Post schreef:
 On 7/27/2010 at 05:55 AM, "van Sleeuwen, Berry"

>  wrote:
>
>> But how can we
>> configure the linux guest to use port 1? Either in VM or in the
>> linuxguest. Where can I find this in the documentation?
>>
> On SLES 10 (SP2 and higher):
> yast -> Network Devices -> Network Card -> Edit -> Advanced -> S/390
> and set Port Number to 1.
>
>
> Mark Post
>
> --
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> --
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>
>
>

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-27 Thread Mark Post 
>>> On 7/27/2010 at 05:55 AM, "van Sleeuwen, Berry"
 wrote: 
> But how can we
> configure the linux guest to use port 1? Either in VM or in the
> linuxguest. Where can I find this in the documentation?

On SLES 10 (SP2 and higher):
yast -> Network Devices -> Network Card -> Edit -> Advanced -> S/390
and set Port Number to 1.


Mark Post

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Re: Attach OSA express3 to a guest

2010-07-27 Thread Quay, Jonathan (IHG) 
Look on DeveloperWorks at the Devices Drivers documentation.  There is a large 
chapter on qeth.



From: Linux on 390 Port on behalf of van Sleeuwen, Berry
Sent: Tue 7/27/2010 5:55 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Attach OSA express3 to a guest



Hi listers,

Our linux guests connect to the vswitch. Our vswitch has been configured
to use an OSA device on one of the ports. We have a vswitch that
connects to port 0 and two that connect to port 1.

We now have a guest that must be configured with a dedicated OSA, ie
attach the OSA devices to the guest, using port 1. But how can we
configure the linux guest to use port 1? Either in VM or in the
linuxguest. Where can I find this in the documentation?


Met vriendelijke groet/With kind regards,
Berry van Sleeuwen
Flight Forum 3000 5657 EW Eindhoven

( +31 (0)6 22564276

   



Atos Origin <http://www.atosorigin.com/>

MO CF SC Mainframe Services





--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/



--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Attach OSA express3 to a guest

2010-07-27 Thread van Sleeuwen, Berry 
Hi listers,
 
Our linux guests connect to the vswitch. Our vswitch has been configured
to use an OSA device on one of the ports. We have a vswitch that
connects to port 0 and two that connect to port 1.
 
We now have a guest that must be configured with a dedicated OSA, ie
attach the OSA devices to the guest, using port 1. But how can we
configure the linux guest to use port 1? Either in VM or in the
linuxguest. Where can I find this in the documentation?
 

Met vriendelijke groet/With kind regards, 
Berry van Sleeuwen 
Flight Forum 3000 5657 EW Eindhoven

( +31 (0)6 22564276





Atos Origin  

MO CF SC Mainframe Services

 

 

--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
<><>ÿþDit bericht is vertrouwelijk en kan 
geheime informatie bevatten enkel

bestemd voor de geadresseerde. Indien 
dit bericht niet voor u is bestemd,

verzoeken wij u dit onmiddellijk aan 
ons te melden en het bericht te

vernietigen.

Aangezien de integriteit van het 
bericht niet veilig gesteld is middels

verzending via internet, kan Atos 
Origin niet aansprakelijk worden 
gehouden

voor de inhoud daarvan.

Hoewel wij ons inspannen een virusvrij 
netwerk te hanteren, geven

wij geen enkele garantie dat dit 
bericht virusvrij is, noch aanvaarden 
wij

enige aansprakelijkheid voor de 
mogelijke aanwezigheid van een virus in 
dit

bericht.

 

Op al onze rechtsverhoudingen, 
aanbiedingen en overeenkomsten 
waaronder

Atos Origin goederen en/of diensten 
levert zijn met uitsluiting van alle

andere voorwaarden de 
Leveringsvoorwaarden van Atos Origin 
van toepassing.

Deze worden u op aanvraag direct 
kosteloos toegezonden.

 

This e-mail and the documents attached 
are confidential and intended solely

for the addressee; it may also be 
privileged. If you receive this e-mail

in error, please notify the sender 
immediately and destroy it.

As its integrity cannot be secured on 
the Internet, the Atos Origin group

liability cannot be triggered for the 
message content. Although the

sender endeavours to maintain a 
computer virus-free network, the sender

does not warrant that this transmission 
is virus-free and will not be

liable for any damages resulting from 
any virus transmitted.

 

On all offers and agreements under 
which Atos Origin supplies goods and/or

services of whatever nature, the Terms 
of Delivery from Atos Origin

exclusively apply. 

The Terms of Delivery shall be promptly 
submitted to you on your request.

 

Atos Origin Nederland B.V. / Utrecht

KvK Utrecht 30132762