Re: Network card speed
I use this trick to determine the real speed of any connection: On guest 192.168.0.2: nc -l > /dev/null (on some distros, nc is called netcat, so check if it's installed) On guest 192.168.0.3: dd if=/dev/zero bs=1M count=64 | nc 192.168.0.2 This will dump 64MB of zeros over the network and show the speed after it. Try this between your guests on the same guest lan, and with a guest and an external host. Mauro http://mauro.limeiratem.com - registered Linux User: 294521 Scripture is both history, and a love letter from God. 2012/6/20 Ron Foster > Victor, > > The output you included showed that Linux thinks this is Guestlan QDIO > connection. I always thought that between the Linux guests and the > VSWITCH, you used the QDIO protocol. And from the SHARE presentations that > I have attended, that if you have settings like correct MTU sizes, that > this protocol is very fast. (I don't have a presentation handy at the > moment, but it think I remember that the speed that this protocol can > operate at is much faster than the OSA adapter can send it out over the > wire.) > > Ron Foster > > Baldor Electric Company > > 5711 R S Boreham Jr Street > > Fort Smith, AR 72901 > > Phone:479-648-5865 > > Fax:479-646-5440 > > Email: ron.fos...@baldor.abb.com > > www.baldor.com > > > > > From: Linux on 390 Port [LINUX-390@VM.MARIST.EDU] on behalf of Victor > Echavarry Diaz [vechava...@evertecinc.com] > Sent: Wednesday, June 20, 2012 10:56 AM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Network card speed > > Ron: > Is through VSWITCH. The OSA is Gb speed. The issue is we use velocity to > monitor it show the guest with 100 Mbs. You go to the SLES 11 and with > ethtool show 1Gb card speed. So, we need a utility to confirm which is the > real speed inside the guest. > Regards, > Victor Echavarry > System Programmer > Technology Systems & Operations Division > EVERTEC > > > > -Original Message- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ron > Foster > Sent: Wednesday, June 20, 2012 11:43 AM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Network card speed > > Victor, > > How do the guests attach to this OSA card? > Is it through a VSWITCH? > > Also, the network folks who control the switch that the OSA card is > attached to should be able to tell > you the speed at which the connection from the switch to the OSA adapter > is operating. > > Ron Foster > > Baldor Electric Company > > 5711 R S Boreham Jr Street > > Fort Smith, AR 72901 > > Phone:479-648-5865 > > Fax:479-646-5440 > > Email: ron.fos...@baldor.abb.com > > www.baldor.com > > > > > From: Linux on 390 Port [LINUX-390@VM.MARIST.EDU] on behalf of Victor > Echavarry Diaz [vechava...@evertecinc.com] > Sent: Wednesday, June 20, 2012 10:27 AM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Network card speed > > Ursula: > This is my output > # lsqeth eth0 > Device name : eth0 > - >card_type : GuestLAN QDIO >cdev0 : 0.0.0360 >cdev1 : 0.0.0361 >cdev2 : 0.0.0362 >chpid : 23 >online : 1 >portno : 1 >route4 : no >route6 : no >checksumming: sw checksumming >state : UP (LAN ONLINE) >priority_queueing : always queue 2 >fake_ll : 0 >fake_broadcast : 0 >buffer_count: 16 >add_hhlen : 0 >layer2 : 0 > large_send : no > > Regards, > Victor Echavarry > System Programmer > Technology Systems & Operations Division > EVERTEC > > > > -Original Message- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Ursula Braun > Sent: Wednesday, June 20, 2012 11:14 AM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Network card speed > > On Wed, 2012-06-20 at 09:15 -0400, Victor Echavarry Diaz wrote: > > Ursula: > > Which tool we have for SLES 10? Our majority of servers are on SLES 10. > > Victor, > > for SLES10 (and SLES11) you can derive the maximum speed from the > card_type line in the output of >lsqeth eth > Once OSA-devices are online, it displays one of these values >OSD_100 >OSD_1000 >
Re: Network card speed
Victor, The output you included showed that Linux thinks this is Guestlan QDIO connection. I always thought that between the Linux guests and the VSWITCH, you used the QDIO protocol. And from the SHARE presentations that I have attended, that if you have settings like correct MTU sizes, that this protocol is very fast. (I don't have a presentation handy at the moment, but it think I remember that the speed that this protocol can operate at is much faster than the OSA adapter can send it out over the wire.) Ron Foster Baldor Electric Company 5711 R S Boreham Jr Street Fort Smith, AR 72901 Phone:479-648-5865 Fax:479-646-5440 Email: ron.fos...@baldor.abb.com www.baldor.com From: Linux on 390 Port [LINUX-390@VM.MARIST.EDU] on behalf of Victor Echavarry Diaz [vechava...@evertecinc.com] Sent: Wednesday, June 20, 2012 10:56 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed Ron: Is through VSWITCH. The OSA is Gb speed. The issue is we use velocity to monitor it show the guest with 100 Mbs. You go to the SLES 11 and with ethtool show 1Gb card speed. So, we need a utility to confirm which is the real speed inside the guest. Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ron Foster Sent: Wednesday, June 20, 2012 11:43 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed Victor, How do the guests attach to this OSA card? Is it through a VSWITCH? Also, the network folks who control the switch that the OSA card is attached to should be able to tell you the speed at which the connection from the switch to the OSA adapter is operating. Ron Foster Baldor Electric Company 5711 R S Boreham Jr Street Fort Smith, AR 72901 Phone:479-648-5865 Fax:479-646-5440 Email: ron.fos...@baldor.abb.com www.baldor.com From: Linux on 390 Port [LINUX-390@VM.MARIST.EDU] on behalf of Victor Echavarry Diaz [vechava...@evertecinc.com] Sent: Wednesday, June 20, 2012 10:27 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed Ursula: This is my output # lsqeth eth0 Device name : eth0 - card_type : GuestLAN QDIO cdev0 : 0.0.0360 cdev1 : 0.0.0361 cdev2 : 0.0.0362 chpid : 23 online : 1 portno : 1 route4 : no route6 : no checksumming: sw checksumming state : UP (LAN ONLINE) priority_queueing : always queue 2 fake_ll : 0 fake_broadcast : 0 buffer_count: 16 add_hhlen : 0 layer2 : 0 large_send : no Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ursula Braun Sent: Wednesday, June 20, 2012 11:14 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed On Wed, 2012-06-20 at 09:15 -0400, Victor Echavarry Diaz wrote: > Ursula: > Which tool we have for SLES 10? Our majority of servers are on SLES 10. Victor, for SLES10 (and SLES11) you can derive the maximum speed from the card_type line in the output of lsqeth eth Once OSA-devices are online, it displays one of these values OSD_100 OSD_1000 OSD_10GIG Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ - CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.’s authorization. If you are not the in
Re: Network card speed
On Wed, 2012-06-20 at 11:27 -0400, Victor Echavarry Diaz wrote: > Ursula: > This is my output > # lsqeth eth0 > Device name : eth0 > - > card_type : GuestLAN QDIO Victor, then you are running a virtual net interface connected to a z/VM VSWITCH or GuestLAN. In this case Linux cannot provide a value for the maximum speed - only for real OSA-devices added to Linux. Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Network card speed
Ron: Is through VSWITCH. The OSA is Gb speed. The issue is we use velocity to monitor it show the guest with 100 Mbs. You go to the SLES 11 and with ethtool show 1Gb card speed. So, we need a utility to confirm which is the real speed inside the guest. Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ron Foster Sent: Wednesday, June 20, 2012 11:43 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed Victor, How do the guests attach to this OSA card? Is it through a VSWITCH? Also, the network folks who control the switch that the OSA card is attached to should be able to tell you the speed at which the connection from the switch to the OSA adapter is operating. Ron Foster Baldor Electric Company 5711 R S Boreham Jr Street Fort Smith, AR 72901 Phone:479-648-5865 Fax:479-646-5440 Email: ron.fos...@baldor.abb.com www.baldor.com From: Linux on 390 Port [LINUX-390@VM.MARIST.EDU] on behalf of Victor Echavarry Diaz [vechava...@evertecinc.com] Sent: Wednesday, June 20, 2012 10:27 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed Ursula: This is my output # lsqeth eth0 Device name : eth0 - card_type : GuestLAN QDIO cdev0 : 0.0.0360 cdev1 : 0.0.0361 cdev2 : 0.0.0362 chpid : 23 online : 1 portno : 1 route4 : no route6 : no checksumming: sw checksumming state : UP (LAN ONLINE) priority_queueing : always queue 2 fake_ll : 0 fake_broadcast : 0 buffer_count: 16 add_hhlen : 0 layer2 : 0 large_send : no Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ursula Braun Sent: Wednesday, June 20, 2012 11:14 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed On Wed, 2012-06-20 at 09:15 -0400, Victor Echavarry Diaz wrote: > Ursula: > Which tool we have for SLES 10? Our majority of servers are on SLES 10. Victor, for SLES10 (and SLES11) you can derive the maximum speed from the card_type line in the output of lsqeth eth Once OSA-devices are online, it displays one of these values OSD_100 OSD_1000 OSD_10GIG Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ - CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.’s authorization. If you are not the intended recipient of this email, you are not an authorized person. Please delete it and notify the sender immediately. EVERTEC, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, EVERTEC, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereto. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Network card speed
Victor, How do the guests attach to this OSA card? Is it through a VSWITCH? Also, the network folks who control the switch that the OSA card is attached to should be able to tell you the speed at which the connection from the switch to the OSA adapter is operating. Ron Foster Baldor Electric Company 5711 R S Boreham Jr Street Fort Smith, AR 72901 Phone:479-648-5865 Fax:479-646-5440 Email: ron.fos...@baldor.abb.com www.baldor.com From: Linux on 390 Port [LINUX-390@VM.MARIST.EDU] on behalf of Victor Echavarry Diaz [vechava...@evertecinc.com] Sent: Wednesday, June 20, 2012 10:27 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed Ursula: This is my output # lsqeth eth0 Device name : eth0 - card_type : GuestLAN QDIO cdev0 : 0.0.0360 cdev1 : 0.0.0361 cdev2 : 0.0.0362 chpid : 23 online : 1 portno : 1 route4 : no route6 : no checksumming: sw checksumming state : UP (LAN ONLINE) priority_queueing : always queue 2 fake_ll : 0 fake_broadcast : 0 buffer_count: 16 add_hhlen : 0 layer2 : 0 large_send : no Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ursula Braun Sent: Wednesday, June 20, 2012 11:14 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed On Wed, 2012-06-20 at 09:15 -0400, Victor Echavarry Diaz wrote: > Ursula: > Which tool we have for SLES 10? Our majority of servers are on SLES 10. Victor, for SLES10 (and SLES11) you can derive the maximum speed from the card_type line in the output of lsqeth eth Once OSA-devices are online, it displays one of these values OSD_100 OSD_1000 OSD_10GIG Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Network card speed
Ursula: This is my output # lsqeth eth0 Device name : eth0 - card_type : GuestLAN QDIO cdev0 : 0.0.0360 cdev1 : 0.0.0361 cdev2 : 0.0.0362 chpid : 23 online : 1 portno : 1 route4 : no route6 : no checksumming: sw checksumming state : UP (LAN ONLINE) priority_queueing : always queue 2 fake_ll : 0 fake_broadcast : 0 buffer_count: 16 add_hhlen : 0 layer2 : 0 large_send : no Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ursula Braun Sent: Wednesday, June 20, 2012 11:14 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed On Wed, 2012-06-20 at 09:15 -0400, Victor Echavarry Diaz wrote: > Ursula: > Which tool we have for SLES 10? Our majority of servers are on SLES 10. Victor, for SLES10 (and SLES11) you can derive the maximum speed from the card_type line in the output of lsqeth eth Once OSA-devices are online, it displays one of these values OSD_100 OSD_1000 OSD_10GIG Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Network card speed
On Wed, 2012-06-20 at 09:15 -0400, Victor Echavarry Diaz wrote: > Ursula: > Which tool we have for SLES 10? Our majority of servers are on SLES 10. Victor, for SLES10 (and SLES11) you can derive the maximum speed from the card_type line in the output of lsqeth eth Once OSA-devices are online, it displays one of these values OSD_100 OSD_1000 OSD_10GIG Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Network card speed
Ursula: Which tool we have for SLES 10? Our majority of servers are on SLES 10. Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Ursula Braun Sent: Wednesday, June 20, 2012 3:39 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Network card speed On Tue, 2012-06-19 at 16:15 -0400, Victor Echavarry Diaz wrote: > We have installed an OSA gigabit card. When we check the speed of any zlinux > guest attached to this OSA card velocity show 100Mbs instead of Gigabit. Is > there a tool or a command to check inside the zlinux guest the speed of the > card? We have z/vm 5.4 and z/linux 10SP4 and SLES 11SP1. I use ethtool and > show no data available for eth0. > Regards, > Victor Echavarry > System Programmer > Technology Systems & Operations Division > EVERTEC Victor, with SLES11 SP1 you can use "ethtool eth". This feature is not available with SLES10 SP4. Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ - CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.’s authorization. If you are not the intended recipient of this email, you are not an authorized person. Please delete it and notify the sender immediately. EVERTEC, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, EVERTEC, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereto.
Re: Network card speed
On Tue, 2012-06-19 at 16:15 -0400, Victor Echavarry Diaz wrote: > We have installed an OSA gigabit card. When we check the speed of any zlinux > guest attached to this OSA card velocity show 100Mbs instead of Gigabit. Is > there a tool or a command to check inside the zlinux guest the speed of the > card? We have z/vm 5.4 and z/linux 10SP4 and SLES 11SP1. I use ethtool and > show no data available for eth0. > Regards, > Victor Echavarry > System Programmer > Technology Systems & Operations Division > EVERTEC Victor, with SLES11 SP1 you can use "ethtool eth". This feature is not available with SLES10 SP4. Regards, Ursula Braun, IBM Germany -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Network card speed
We have installed an OSA gigabit card. When we check the speed of any zlinux guest attached to this OSA card velocity show 100Mbs instead of Gigabit. Is there a tool or a command to check inside the zlinux guest the speed of the card? We have z/vm 5.4 and z/linux 10SP4 and SLES 11SP1. I use ethtool and show no data available for eth0. Regards, Victor Echavarry System Programmer Technology Systems & Operations Division EVERTEC - CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.’s authorization. If you are not the intended recipient of this email, you are not an authorized person. Please delete it and notify the sender immediately. EVERTEC, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, EVERTEC, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereto. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Verify network card speed
>>> On Tue, Jun 19, 2007 at 3:13 PM, in message <[EMAIL PROTECTED]>, David Kreuter <[EMAIL PROTECTED]> wrote: -snip- > So you need CMS and OSA/SF do to this. I can't think of a way to get this > info in a linux virtual machine, unless the > card_type file when it returns OSD_xxx where x = 100 (I've seen that) means > something. It should. On a system connected to a VSWITCH, the value I get back is "GuestLAN QDIO" Mark Post -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Verify network card speed
I am not running z/VM and I don't have osa/sf running either (at least that is what my co-worker tell me) so I guess the only way to know is to use the HMC. - -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of David Kreuter Sent: Tuesday, June 19, 2007 12:20 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed ... just using function 4 to read the config works in osa/sf. No need for functions 12/13. You learn something everyday if you want. David -Original Message- From: Linux on 390 Port on behalf of Clark, Douglas Sent: Mon 6/18/2007 7:51 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed I have not had a chance to check the HMC; but I didn't see anything using netstat -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Monday, June 18, 2007 2:09 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed On Monday, 06/18/2007 at 01:43 MST, "Clark, Douglas" <[EMAIL PROTECTED]> wrote: > I was asked if I "can you verify you are set t o100/Full on your side" > for my Linux LPAR; I have looked at the output from the hardware scan > and the sys log messages but I did not see anything that would show > that information / at least what I could understand from the data. > The output from "ifstatus eth0" is here: IIRC, this information is available in the OSA Advanced Functions of the HMC or via z/OS queries (NETSTAT DEV, I think). Alan Altmark z/VM Development IBM Endicott -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Verify network card speed
... just using function 4 to read the config works in osa/sf. No need for functions 12/13. You learn something everyday if you want. David -Original Message- From: Linux on 390 Port on behalf of Clark, Douglas Sent: Mon 6/18/2007 7:51 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed I have not had a chance to check the HMC; but I didn't see anything using netstat -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Monday, June 18, 2007 2:09 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed On Monday, 06/18/2007 at 01:43 MST, "Clark, Douglas" <[EMAIL PROTECTED]> wrote: > I was asked if I "can you verify you are set t o100/Full on your side" > for my Linux LPAR; I have looked at the output from the hardware scan > and the sys log messages but I did not see anything that would show > that information / at least what I could understand from the data. > The output from "ifstatus eth0" is here: IIRC, this information is available in the OSA Advanced Functions of the HMC or via z/OS queries (NETSTAT DEV, I think). Alan Altmark z/VM Development IBM Endicott -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Verify network card speed
wow - I just used OSA/SF - what a strange interface. But I guess if I got used to RACF - Anyway OSA/SF does what you want. As Alan also indicated you can get this info from the HMC, I did that, too. I guess I prefer using OSA/SF. I did function 12, 4, 13 (start managing, get configuration, stop managing) in OSADMIN1 via IOACMD EXEC. I will maybe (or not) play with the GUI. But then again I don't like GUIs in the mainframe environs. So you need CMS and OSA/SF do to this. I can't think of a way to get this info in a linux virtual machine, unless the card_type file when it returns OSD_xxx where x = 100 (I've seen that) means something. A simple NETSTAT query interface would be nice. But at least you can get the info. David -Original Message- From: Linux on 390 Port on behalf of Clark, Douglas Sent: Mon 6/18/2007 7:51 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed I have not had a chance to check the HMC; but I didn't see anything using netstat -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Monday, June 18, 2007 2:09 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed On Monday, 06/18/2007 at 01:43 MST, "Clark, Douglas" <[EMAIL PROTECTED]> wrote: > I was asked if I "can you verify you are set t o100/Full on your side" > for my Linux LPAR; I have looked at the output from the hardware scan > and the sys log messages but I did not see anything that would show > that information / at least what I could understand from the data. > The output from "ifstatus eth0" is here: IIRC, this information is available in the OSA Advanced Functions of the HMC or via z/OS queries (NETSTAT DEV, I think). Alan Altmark z/VM Development IBM Endicott -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Verify network card speed
I have not had a chance to check the HMC; but I didn't see anything using netstat -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Monday, June 18, 2007 2:09 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Verify network card speed On Monday, 06/18/2007 at 01:43 MST, "Clark, Douglas" <[EMAIL PROTECTED]> wrote: > I was asked if I "can you verify you are set t o100/Full on your side" > for my Linux LPAR; I have looked at the output from the hardware scan > and the sys log messages but I did not see anything that would show > that information / at least what I could understand from the data. > The output from "ifstatus eth0" is here: IIRC, this information is available in the OSA Advanced Functions of the HMC or via z/OS queries (NETSTAT DEV, I think). Alan Altmark z/VM Development IBM Endicott -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Verify network card speed
On Monday, 06/18/2007 at 01:43 MST, "Clark, Douglas" <[EMAIL PROTECTED]> wrote: > I was asked if I "can you verify you are set t o100/Full on your side" > for my Linux LPAR; I have looked at the output from the hardware scan > and the sys log messages but I did not see anything that would show that > information / at least what I could understand from the data. The > output from "ifstatus eth0" is here: IIRC, this information is available in the OSA Advanced Functions of the HMC or via z/OS queries (NETSTAT DEV, I think). Alan Altmark z/VM Development IBM Endicott -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Verify network card speed
On Jun 18, 2007, at 3:43 PM, Clark, Douglas wrote: I was asked if I "can you verify you are set t o100/Full on your side" for my Linux LPAR; I have looked at the output from the hardware scan and the sys log messages but I did not see anything that would show that information / at least what I could understand from the data. The output from "ifstatus eth0" is here: Well, on Intel systems you'd generally do "ethtool eth0". That didn't work so well on my Layer 3 Guest LAN, but maybe that's not surprising: [EMAIL PROTECTED]:~# ethtool eth0 Settings for eth0: No data available Adam -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Verify network card speed
I was asked if I "can you verify you are set t o100/Full on your side" for my Linux LPAR; I have looked at the output from the hardware scan and the sys log messages but I did not see anything that would show that information / at least what I could understand from the data. The output from "ifstatus eth0" is here: dvelnux1:/local # ifstatus eth0 eth0 eth0 configuration: qeth-bus-ccw-0.0.3200 eth0 is up 4: eth0: mtu 1492 qdisc pfifo_fast qlen 1000 link/ether 00:02:55:89:0a:21 brd ff:ff:ff:ff:ff:ff inet 10.128.24.233/24 brd 10.128.24.255 scope global eth0 inet6 fe80::2:5500:2189:a21/64 scope link valid_lft forever preferred_lft forever eth0 IP address: 10.128.24.233/24 Configured routes for interface eth0: default 10.128.24.1 - - 169.254.0.0 - 255.255.0.0 eth0 Active routes for interface eth0: 10.128.24.0/24 proto kernel scope link src 10.128.24.233 169.254.0.0/16 scope link default via 10.128.24.1 1 of 2 configured routes for interface eth0 up But I don't see anything that tell me the speed or full / half duplex. Did I miss something? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390