Re: Trouble booting a new guest
On Wed, Jun 30, 2004 at 12:53:56PM -0400, Eric Sammons wrote: > The guest never gets to run level 2. None of the commands are available. > Because ls and other commands are not available I use echo *, from / that > returns: > bin dev lib linuxrc Clearly it has booted to the initrd and given you a shell prompt rather than doing what it should. Probably it should be running that linuxrc script (or binary), which should be loading the dasd driver kernel modules, mounting the real root filesystem, and pivoting to that. Details depend on the particular distro and version you are running though. Could be a problem with the kernel parameters; for example having "init=/bin/sh" might give you this effect. Richard > Thanks! > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important step. then you > compute the consequences. Compare the consequences to experience. If it > disagrees with experience, the guess is wrong. In that simple statement > is the key to science. It doesn't matter how beautiful your guess is or > how smart you are or what your name is. If it disagrees with experience, > It's wrong. That's all there is to it." -- Richard Feynman > > > > > > Ranga Nathan <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 11:52 AM > Please respond to Linux on 390 Port > > > To: [EMAIL PROTECTED] > cc: > Subject:Re: Trouble booting a new guest > > Hmm. Normally I would see some info about interface binding to eth0 which > will give you an IP. Looks like you can log in as root. Can you type > 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you > manually perform 'init 3'? > __ > Ranga Nathan / CSG > Systems Programmer - Specialist; Technical Services; > BAX Global Inc. Irvine-California > Tel: 714-442-7591 Fax: 714-442-2840 > > > > > > Eric Sammons <[EMAIL PROTECTED]> > > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 08:37 AM > Please respond to Linux on 390 Port > > To: [EMAIL PROTECTED] > cc: > Subject:Re: Trouble booting a new guest > > > The system never gets to runlevel 3. In fact I believe it fails to get to > runlevel 2. You will notice I have root prompt, Never got a login prompt > and never got to the point where services start-up. > > Thanks! > > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important step. then you > compute the consequences. Compare the consequences to experience. If it > disagrees with experience, the guess is wrong. In that simple statement > is the key to science. It doesn't matter how beautiful your guess is or > how smart you are or what your name is. If it disagrees with experience, > It's wrong. That's all there is to it." -- Richard Feynman > > > > > > "Post, Mark K" <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 11:00 AM > Please respond to Linux on 390 Port > > > To: [EMAIL PROTECTED] > cc: > Subject:Re: Trouble booting a new guest > > That all looks like normal startup messages to me. What is your problem, > exactly? > > > Mark Post > > -Original Message- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric > Sammons > Sent: Wednesday, June 30, 2004 10:03 AM > To: [EMAIL PROTECTED] > Subject: Trouble booting a new guest > > > I have installed a new guest, I am using NFS as my install medium and not > that it should matter, I am using a Red Hat Linux Intel system as my NFS > server. The system seems to build just fine; however, when I execute the > ipl 300 clear I get the following: > > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache > hash > table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table > entries: > 131072 (order: 7, 524288 bytes) > debug: Initialization complete > POSIX conformance testing by UNIFIX > Detected 1 CPU's > Boot cpu address 0 > cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= > migration_task 0 on cpu=0 init_mach : starting machine check handler Linux > NET4.
Re: Trouble booting a new guest
Can't tell, after the install I get a message that the system will now shutdown and that I should proceed to boot using my root dasd. Which I do... At which point all appears well and then when it appears things should be moving into run level 2 it drops into the root shell, from which I can see nothing other than the 3 directories and the command linuxrc. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman David Kreuter <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 01:59 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest What initialization level does /etc/inittab say it is attempting? David Kreuter From: Linux on 390 Port on behalf of Eric Sammons Sent: Wed 6/30/2004 1:54 PM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest Here it is again, a fresh build with 0300ext2/boot 0301ext3/ 0302ext3/var 0303ext3/home Ready; T=0.01/0.02 13:50:31 ipl 300 clear hwc low level driver: can write messages hwc low level driver: can not read state change notifications hwc low level driver: can receive signal quiesce hwc low level driver: can read commands hwc low level driver: can read priority commands Linux version 2.4.19-3suse-SMP ([EMAIL PROTECTED]) (gcc version 3.2) #1 SMP Wed Nov 6 22:34:43 UTC 2002 We are running under VM (31 bit mode) This machine has an IEEE fpu On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: root=/dev/ram0 ro Highest subchannel number detected (hex) : 0023 Calibrating delay loop... 627.50 BogoMIPS Memory: 513944k/524288k available (1706k kernel code, 0k reserved, 396k data, 56 k init) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) , Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured , RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # Thoughts? === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Little, Chris" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 01:11 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Doesn't look
Re: Trouble booting a new guest
I think this is your problem: Kernel command line: root=/dev/ram0 ro It's telling the system that your root file system is on your ram disk, which essentially has some device driver modules, and that's about it. I think you need to IPL your installation system, mount your DASD volumes, chroot to the root file system, update your zipl parameters, re-make the initrd, and re-run zipl, then reboot. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 1:55 PM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest Here it is again, a fresh build with 0300ext2/boot 0301ext3/ 0302ext3/var 0303ext3/home Ready; T=0.01/0.02 13:50:31 ipl 300 clear hwc low level driver: can write messages hwc low level driver: can not read state change notifications hwc low level driver: can receive signal quiesce hwc low level driver: can read commands hwc low level driver: can read priority commands Linux version 2.4.19-3suse-SMP ([EMAIL PROTECTED]) (gcc version 3.2) #1 SMP Wed Nov 6 22:34:43 UTC 2002 We are running under VM (31 bit mode) This machine has an IEEE fpu On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: root=/dev/ram0 ro Highest subchannel number detected (hex) : 0023 Calibrating delay loop... 627.50 BogoMIPS Memory: 513944k/524288k available (1706k kernel code, 0k reserved, 396k data, 56 k init) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) , Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured , RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # Thoughts? === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Little, Chris" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 01:11 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Doesn't look like everything was installed. Are you sure it completed successfully? > -Original Message- > From: Eric Sammons [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 30, 2004 11:54 AM > To: [EMAIL PROTECTED] > Subject: Re: Trouble booting a new guest > > > The guest never gets to run level 2. None of the commands are > available. Because ls and other commands are not available I use echo > *, from / that > returns: > bin dev lib linuxrc > > Thanks! > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important step. then > you compute the consequences. Compare the consequences to > experience. If it >
Re: Trouble booting a new guest
What initialization level does /etc/inittab say it is attempting? David Kreuter From: Linux on 390 Port on behalf of Eric Sammons Sent: Wed 6/30/2004 1:54 PM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest Here it is again, a fresh build with 0300ext2/boot 0301ext3/ 0302ext3/var 0303ext3/home Ready; T=0.01/0.02 13:50:31 ipl 300 clear hwc low level driver: can write messages hwc low level driver: can not read state change notifications hwc low level driver: can receive signal quiesce hwc low level driver: can read commands hwc low level driver: can read priority commands Linux version 2.4.19-3suse-SMP ([EMAIL PROTECTED]) (gcc version 3.2) #1 SMP Wed Nov 6 22:34:43 UTC 2002 We are running under VM (31 bit mode) This machine has an IEEE fpu On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: root=/dev/ram0 ro Highest subchannel number detected (hex) : 0023 Calibrating delay loop... 627.50 BogoMIPS Memory: 513944k/524288k available (1706k kernel code, 0k reserved, 396k data, 56 k init) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) , Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured , RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # Thoughts? === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Little, Chris" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 01:11 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Doesn't look like everything was installed. Are you sure it completed successfully? > -Original Message- > From: Eric Sammons [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 30, 2004 11:54 AM > To: [EMAIL PROTECTED] > Subject: Re: Trouble booting a new guest > > > The guest never gets to run level 2. None of the commands > are available. > Because ls and other commands are not available I use echo *, > from / that > returns: > bin dev lib linuxrc > > Thanks! > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important > step. then you > compute the consequences. Compare the consequences to > experience. If it > disagrees with experience, the guess is wrong. In that > simple statement > is the key to science. It doesn't matter how beautiful your > guess is or > how smart you are or what your name is. If it disagrees with > experience, > It's wrong. That's all there is to it." -- Richard Feynman > > > > > >
Re: Trouble booting a new guest
Here it is again, a fresh build with 0300ext2/boot 0301ext3/ 0302ext3/var 0303ext3/home Ready; T=0.01/0.02 13:50:31 ipl 300 clear hwc low level driver: can write messages hwc low level driver: can not read state change notifications hwc low level driver: can receive signal quiesce hwc low level driver: can read commands hwc low level driver: can read priority commands Linux version 2.4.19-3suse-SMP ([EMAIL PROTECTED]) (gcc version 3.2) #1 SMP Wed Nov 6 22:34:43 UTC 2002 We are running under VM (31 bit mode) This machine has an IEEE fpu On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. Building zonelist for node : 0 Kernel command line: root=/dev/ram0 ro Highest subchannel number detected (hex) : 0023 Calibrating delay loop... 627.50 BogoMIPS Memory: 513944k/524288k available (1706k kernel code, 0k reserved, 396k data, 56 k init) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) , Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured , RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # Thoughts? === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Little, Chris" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 01:11 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Doesn't look like everything was installed. Are you sure it completed successfully? > -Original Message- > From: Eric Sammons [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 30, 2004 11:54 AM > To: [EMAIL PROTECTED] > Subject: Re: Trouble booting a new guest > > > The guest never gets to run level 2. None of the commands > are available. > Because ls and other commands are not available I use echo *, > from / that > returns: > bin dev lib linuxrc > > Thanks! > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important > step. then you > compute the consequences. Compare the consequences to > experience. If it > disagrees with experience, the guess is wrong. In that > simple statement > is the key to science. It doesn't matter how beautiful your > guess is or > how smart you are or what your name is. If it disagrees with > experience, > It's wrong. That's all there is to it." -- Richard Feynman > > > > > > Ranga Nathan <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 11:52 AM > Please respond to Linux on 390 Port > > > To: [EMAIL PROTECTED] > cc: > Subject:Re:
Re: Trouble booting a new guest
It would probably be easier to make sure your virtual console is spooled so that it captures everything, and you don't have to worry about stuff scrolling off the screen. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 1:14 PM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest I cut and paste directly from my terminal, I believe everything is there. If not I will post messages again after I attempt the build again. === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 12:48 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest You didn't post the whole of your boot messages. There may be something near the top that might be of interest. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 11:38 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=&g
Re: Trouble booting a new guest
I cut and paste directly from my terminal, I believe everything is there. If not I will post messages again after I attempt the build again. === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 12:48 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest You didn't post the whole of your boot messages. There may be something near the top that might be of interest. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 11:38 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=> /dev/dasdf1 => /boot => ext3 0301=> /dev/dasdg1 => / => ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === "First you guess. Don't laugh, this is the mo
Re: Trouble booting a new guest
Doesn't look like everything was installed. Are you sure it completed successfully? > -Original Message- > From: Eric Sammons [mailto:[EMAIL PROTECTED] > Sent: Wednesday, June 30, 2004 11:54 AM > To: [EMAIL PROTECTED] > Subject: Re: Trouble booting a new guest > > > The guest never gets to run level 2. None of the commands > are available. > Because ls and other commands are not available I use echo *, > from / that > returns: > bin dev lib linuxrc > > Thanks! > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important > step. then you > compute the consequences. Compare the consequences to > experience. If it > disagrees with experience, the guess is wrong. In that > simple statement > is the key to science. It doesn't matter how beautiful your > guess is or > how smart you are or what your name is. If it disagrees with > experience, > It's wrong. That's all there is to it." -- Richard Feynman > > > > > > Ranga Nathan <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 11:52 AM > Please respond to Linux on 390 Port > > > To: [EMAIL PROTECTED] > cc: > Subject:Re: Trouble booting a new guest > > Hmm. Normally I would see some info about interface binding > to eth0 which > will give you an IP. Looks like you can log in as root. Can you type > 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you > manually perform 'init 3'? > __ > Ranga Nathan / CSG > Systems Programmer - Specialist; Technical Services; > BAX Global Inc. Irvine-California > Tel: 714-442-7591 Fax: 714-442-2840 > > > > > > Eric Sammons <[EMAIL PROTECTED]> > > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 08:37 AM > Please respond to Linux on 390 Port > > To: [EMAIL PROTECTED] > cc: > Subject:Re: Trouble booting a new guest > > > The system never gets to runlevel 3. In fact I believe it > fails to get to > runlevel 2. You will notice I have root prompt, Never got a > login prompt > and never got to the point where services start-up. > > Thanks! > > === > > Eric Sammons, RHCE > (804)697-3925 > eric.sammons at frit.frb.org > FRIT - Unix Systems > > === > > "First you guess. Don't laugh, this is the most important > step. then you > compute the consequences. Compare the consequences to > experience. If it > disagrees with experience, the guess is wrong. In that > simple statement > is the key to science. It doesn't matter how beautiful your > guess is or > how smart you are or what your name is. If it disagrees with > experience, > It's wrong. That's all there is to it." -- Richard Feynman > > > > > > "Post, Mark K" <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 06/30/2004 11:00 AM > Please respond to Linux on 390 Port > > > To: [EMAIL PROTECTED] > cc: > Subject:Re: Trouble booting a new guest > > That all looks like normal startup messages to me. What is > your problem, > exactly? > > > Mark Post > > -Original Message- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On > Behalf Of Eric > Sammons > Sent: Wednesday, June 30, 2004 10:03 AM > To: [EMAIL PROTECTED] > Subject: Trouble booting a new guest > > > I have installed a new guest, I am using NFS as my install > medium and not > that it should matter, I am using a Red Hat Linux Intel > system as my NFS > server. The system seems to build just fine; however, when I > execute the > ipl 300 clear I get the following: > > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer-cache > hash > table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table > entries: > 131072 (order: 7, 524288 bytes) > debug: Initialization complete > POSIX conformance testing by UNIFIX > Detected 1 CPU's > Boot cpu address 0 > cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= > migration_task 0 on cpu=0 init_mach : starting machine check > handler Linux > NET4.0 for Linux 2.4 Based upon Swansea University Computer Society > NET3.039 > Initializing RT netlink socket mach_handler : rea
Re: Trouble booting a new guest
The guest never gets to run level 2. None of the commands are available. Because ls and other commands are not available I use echo *, from / that returns: bin dev lib linuxrc Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman Ranga Nathan <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:52 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest Hmm. Normally I would see some info about interface binding to eth0 which will give you an IP. Looks like you can log in as root. Can you type 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you manually perform 'init 3'? __ Ranga Nathan / CSG Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Eric Sammons <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 08:37 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300
Re: Trouble booting a new guest
You didn't post the whole of your boot messages. There may be something near the top that might be of interest. Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 11:38 AM To: [EMAIL PROTECTED] Subject: Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=> /dev/dasdf1 => /boot => ext3 0301=> /dev/dasdg1 => / => ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / si
Re: Trouble booting a new guest
Hmm. Normally I would see some info about interface binding to eth0 which will give you an IP. Looks like you can log in as root. Can you type 'login root'? or somehow get to run '/sbin/ifconfig eth0'? Or can you manually perform 'init 3'? __ Ranga Nathan / CSG Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Eric Sammons <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 08:37 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=> /dev/dasdf1 => /boot => ext3 0301=> /dev/dasdg1 => / => ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/
Re: Trouble booting a new guest
The system never gets to runlevel 3. In fact I believe it fails to get to runlevel 2. You will notice I have root prompt, Never got a login prompt and never got to the point where services start-up. Thanks! === Eric Sammons, RHCE (804)697-3925 eric.sammons at frit.frb.org FRIT - Unix Systems === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 06/30/2004 11:00 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject:Re: Trouble booting a new guest That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=> /dev/dasdf1 => /boot => ext3 0301=> /dev/dasdg1 => / => ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Trouble booting a new guest
That all looks like normal startup messages to me. What is your problem, exactly? Mark Post -Original Message- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sammons Sent: Wednesday, June 30, 2004 10:03 AM To: [EMAIL PROTECTED] Subject: Trouble booting a new guest I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=> /dev/dasdf1 => /boot => ext3 0301=> /dev/dasdg1 => / => ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Trouble booting a new guest
I have installed a new guest, I am using NFS as my install medium and not that it should matter, I am using a Red Hat Linux Intel system as my NFS server. The system seems to build just fine; however, when I execute the ipl 300 clear I get the following: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) debug: Initialization complete POSIX conformance testing by UNIFIX Detected 1 CPU's Boot cpu address 0 cpu 0 phys_idx=0 vers=FF ident=0F11AA machine=2064 unused= migration_task 0 on cpu=0 init_mach : starting machine check handler Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mach_handler : ready mach_handler : waiting for wakeup Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 32768 aio_setup: sizeof(struct page) = 44 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 16 devices) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. debug: cio_msg: new level 6 debug: cio_trace: new level 6 debug: cio_crw: new level 6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 644k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 14k freed # I have two disks and two filesystems: 0300=> /dev/dasdf1 => /boot => ext3 0301=> /dev/dasdg1 => / => ext3 I can not figure out what is going on or if something is missing etc. . . Thoughts - Help? Thanks! === Eric Sammons, RHCE eric.sammons at frit.frb.org === "First you guess. Don't laugh, this is the most important step. then you compute the consequences. Compare the consequences to experience. If it disagrees with experience, the guess is wrong. In that simple statement is the key to science. It doesn't matter how beautiful your guess is or how smart you are or what your name is. If it disagrees with experience, It's wrong. That's all there is to it." -- Richard Feynman -- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390