Re: [linux-dvb] [Fwd: Mantis gpio_set_bits() fix]
Hi Michel, Great that the fix helped you. The last problem might well be with the card, because those channels don't work under Windows either. Do you have any clue that how those channels differ from the ones that you find with a scan? Astra might have details of their channels in their Website. Here in Finland on some cards DVB text works under Linux, but not under Windows. Extracting text from TS is done in software. Regards, Marko Ristola Michel Verbraak kirjoitti: Marko Ristola schreef: Onderwerp: Mantis gpio_set_bits() fix Van: Marko Ristola <[EMAIL PROTECTED]> Datum: Sat, 17 Mar 2007 11:14:08 +0200 Aan: Manu Abraham <[EMAIL PROTECTED]> Aan: Manu Abraham <[EMAIL PROTECTED]> Hi Manu, Here is a bugfix for gpio_set_bits(). What do you think about this bugfix? The bug is that the function is only able to turn the given bit on, but it can never turn a bit off. My patch fixes that issue. With my patched version gpio_set_bits is able to turn a single bit on or off. I haven't verified that it actually does turn the device's power off when requested. I tested only rmmod and insmod. It seems to work with this version: I haven't seen a lost frontend. Regards, Marko Ristola This patch solves also the modulation change problem (18v or 13v). I can now receive and scan the same channels as the Windows driver is capable of. I still have the problem that the driver cannot tune to all available channels on a satellite. The windows driver has the same problem. Could this be a problem of the card? Regards, Michel. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] repo Twinhan 2033 (Mantis)
Hello! Where the repo of patched kernel source or URL to download patches for the subject? I found one URL in the mail-list archive, but all attemps failed. I'm urgently need the patch for DVB-C Twinhan 2033! Thanks. -- Nick Fedchik ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Status of Hauppauge - HVR 4000
I was flipping through the mailing list to try and obtain a status about the ongoing development of support for this card ... I noticed that there is some kind of work going on... but I was not able to read what is exactly the state ... Can anyone point me out to more info about ongoing development for this card? Thank you. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Status of Hauppauge - HVR 4000
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jean Paul Gatt wrote: > I was flipping through the mailing list to try and obtain a status about > the > ongoing development of support for this card ... > > I noticed that there is some kind of work going on... but I was not able to > read what is exactly the state ... Can anyone point me out to more info > about ongoing development for this card? > > Thank you. > > > > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb The current implementation is supporting dvb-s interface. Everything in this environment is working fine form me. The most recent improvements: Signal strength displayed correctly, Diseqc is working Currently tuning to a dvb-s2 transponder doesn't work for me. Hope that helps. regards Uwe -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGDN5NspMjDaIAcG8RAra5AKCqBybp8iXiRRDrl4Vo0ddRgiO/gQCfQKJ7 BkxgamkwF1wanUNoQLVSkxQ= =qWte -END PGP SIGNATURE- ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Status of Hauppauge - HVR 4000
Yes ... That helps!! Thank you very much. On 3/30/07, Uwe Schmeling <[EMAIL PROTECTED]> wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jean Paul Gatt wrote: > I was flipping through the mailing list to try and obtain a status about > the > ongoing development of support for this card ... > > I noticed that there is some kind of work going on... but I was not able to > read what is exactly the state ... Can anyone point me out to more info > about ongoing development for this card? > > Thank you. > > > > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb The current implementation is supporting dvb-s interface. Everything in this environment is working fine form me. The most recent improvements: Signal strength displayed correctly, Diseqc is working Currently tuning to a dvb-s2 transponder doesn't work for me. Hope that helps. regards Uwe -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGDN5NspMjDaIAcG8RAra5AKCqBybp8iXiRRDrl4Vo0ddRgiO/gQCfQKJ7 BkxgamkwF1wanUNoQLVSkxQ= =qWte -END PGP SIGNATURE- ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Can anybody please tell me where do i get complete En50221 stack that i can use
Hi, Can anyone please tell me where do i get complete En50221 stack that i can use..Anylinks??Its very urgent.. Rgds,\"Santosh\"___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Status of Hauppauge - HVR 4000
Just to confirm ... Do analog an digital tv, and radio fm tuning work? On 3/30/07, Gregoire Favre <[EMAIL PROTECTED]> wrote: On Fri, Mar 30, 2007 at 11:54:21AM +0200, Uwe Schmeling wrote: > The current implementation is supporting dvb-s interface. Everything in > this environment is working fine form me. The most recent improvements: > Signal strength displayed correctly, > Diseqc is working No, diseqc is only partially working. -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] DVB-H and dvbnet / MAC-broadcast address
Hi, I am looking for help on receiving DVB-H. I get to the point where the encapsulated IP is attached to a network interface (as dvb0_0 using dvbnet -p ). At this stage I am able to dump the UDP-packets received using tcpdump. But I am not able to get that IP-multicast into VLC. I believe the problem is related to the fact that normally IP-multicast uses the Ethernet broadcast address (ff:ff...) while in dvb-h the destination mac is (partly) replaced by the dvb-h time slicing information . Therefore the traffic is only received by the network interface when it is in promiscuous mode (when using tcpdump), but not when a normal program (like vlc) is trying to get multicast frames out of it. My idea then was to modify dvbnet so that it replaces the "broken" ethernet destination (is contains timeslicing-infos) by "ff:ff" so that it goes through the network interface. But the actual code of dvbnet does actually not handle the received data, the only thing that program does is some ioctl(fd_net). Any idea who I could get the ethernet-multicast out even when the destination mac is wrong? Any idea how I could modify (the kernel) so that I could overwrite the faulty mac? I could not find any description on how to receive dvb-h on the web. The are some mailing on how to find SDP files, but that was not such a big thing (dvbsnoop -b ..). Thanks for help, Dietmar Some of my debug output: tzap dvbsnoop 1140 dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ SECT-Packet: 0001 PID: 1140 (0x0474), Length: 996 (0x03e4) Time received: Fri 2007-03-30 00:15:34.630 : 3e b3 e1 0d e1 c1 00 00 0c 80 00 00 45 00 03 d4 >...E... 0010: 68 70 00 00 07 11 d3 96 ac 16 05 0d e1 e1 e1 0d hp.. 0020: c0 12 04 4c 03 c0 dd f5 80 e0 5a 1e fa b3 d3 8d ...L..Z. (...) 03d0: 8e 91 da df 06 f9 42 54 2c 90 bf 5e 2a 7f f7 c0 ..BT,..^*... 03e0: 9c ee 8a fd PID: 1140 (0x0474) Guess table from table id... DSM-CC DATAGRAM-decoding Table_ID: 62 (0x3e) [= DSM-CC - private data section // DVB datagram] section_syntax_indicator: 1 (0x01) private_indicator: 0 (0x00) reserved_1: 3 (0x03) Section_length: 993 (0x03e1) MACaddrbyte/DevicdID 6: 13 (0x0d) MACaddrbyte/DeviceID 5: 225 (0xe1) reserved_2: 3 (0x03) payload_scrambling_control: 0 (0x00) [= unscrambled] address_scrambling_control: 0 (0x00) [= unscrambled] LLC_SNAP_flag: 0 (0x00) current_next_indicator: 1 (0x01) [= valid now] Section_number: 0 (0x00) Last_Section_number: 0 (0x00) MACaddrbyte/DeviceID 4: 12 (0x0c) MACaddrbyte/DeviceID 3: 128 (0x80) MACaddrbyte/DeviceID 2: 0 (0x00) MACaddrbyte/DeviceID 1: 0 (0x00) => MAC-Address/DeviceID: 00:00:80:0c:e1:0d IP_datagram_bytes : 45 00 03 d4 68 70 00 00 07 11 d3 96 ac 16 05 0d E...hp.. 0010: e1 e1 e1 0d c0 12 04 4c 03 c0 dd f5 80 e0 5a 1e ...L..Z. 0020: fa b3 d3 8d 00 00 01 e0 3c 41 8e 0c 0a 7e e3 7a 225.225.225.13.1102: UDP, length 192 00:25:16.377575 IP 172.22.5.13.49172 > 225.225.225.13.1102: UDP, length 183 00:25:16.379331 IP 172.22.5.13.49170 > 225.225.225.13.1100: UDP, length 1472 --- some sdp (not related, from a different service): dvbsnoop 1201 (...) v=0 o=- 1284305069 1139040522 IN IP4 192.168.250.2 s=realtimeaudio c=IN IP4 226.226.0.2 a=control:* a=range:npt=0.0- a=ISMA-compliance:1,1.0,1 a=mpeg4-iod: "data:application/mpeg4-iod;base64,AoEHAA///w///wN +AAFAYGRhdGE6YXBwbGljYXRpb24vbXBlZzQtb2QtYXU7YmFzZTY0LEFTb0JLQUtmQXlRRDZ BVUVEVUFWQUFZQUFBZ1RNQUFCdFlBR0VBQkVBQUNzUkFBQXJFUWdJQUFBQUFNPQQNAgUAAQA AAAYJAQAA" m=audio 9030 RTP/AVP 101 b=AS:112 a=rtpmap:101 mpeg4-generic/44100/2 a=control:trackID=1000 a=fmtp:101 streamtype=5; profile-level-id=15; bitrate=112000; config=1210; sizelength=13; indexlength=3; indexdeltalength=3; profile=1; mode=AAC-hbr a=mpeg4-esid:1000 (...) vlc - thisservice.sdp ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] DVB-H and dvbnet / MAC-broadcast address
Dietmar Zlabinger wrote: Hi, I am looking for help on receiving DVB-H. I get to the point where the encapsulated IP is attached to a network interface (as dvb0_0 using dvbnet -p ). At this stage I am able to dump the UDP-packets received using tcpdump. But I am not able to get that IP-multicast into VLC. I believe the problem is related to the fact that normally IP-multicast uses the Ethernet broadcast address (ff:ff...) while in dvb-h the destination mac is (partly) replaced by the dvb-h time slicing information . Therefore the traffic is only received by the network interface when it is in promiscuous mode (when using tcpdump), but not when a normal program (like vlc) is trying to get multicast frames out of it. My idea then was to modify dvbnet so that it replaces the "broken" ethernet destination (is contains timeslicing-infos) by "ff:ff" so that it goes through the network interface. But the actual code of dvbnet does actually not handle the received data, the only thing that program does is some ioctl(fd_net). Any idea who I could get the ethernet-multicast out even when the destination mac is wrong? Any idea how I could modify (the kernel) so that I could overwrite the faulty mac? I could not find any description on how to receive dvb-h on the web. The are some mailing on how to find SDP files, but that was not such a big thing (dvbsnoop -b ..). Thanks for help, Dietmar premitting that I have very little confidence with networking in general... if you run $ ifconfig dvb0_0 ip/mask promisc up $ route add -net 224.0.0.0/4 dev dvb0_0 you shouldn't need to tamper with the MAC addresses. You can also use smcrouted to re-route the tuple src_ip->dest_ip from dvb0_0 to eth0 (although I find it annoying having to know the source ip). I ad dvb-h working in both manners. -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Refill s.r.l. - Cartucce compatibili e kit di ricarica per tutti i modelli di stampante. Acquista al telefono o online: consegna in tutta Italia in 48 ore! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=5190&d=30-3 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] new Twinhan card
Hello.. What's the word on the new VP 1080i card (which presumably supports HDTV)? Is it fully supported by the driver? - It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar.___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] [Fwd: Mantis gpio_set_bits() fix]
Marko, Did not have time yet to find out. Next weekend I will have a look into it and report back. Regards, Michel. Marko Ristola schreef: Hi Michel, Great that the fix helped you. The last problem might well be with the card, because those channels don't work under Windows either. Do you have any clue that how those channels differ from the ones that you find with a scan? Astra might have details of their channels in their Website. Here in Finland on some cards DVB text works under Linux, but not under Windows. Extracting text from TS is done in software. Regards, Marko Ristola Michel Verbraak kirjoitti: Marko Ristola schreef: Onderwerp: Mantis gpio_set_bits() fix Van: Marko Ristola <[EMAIL PROTECTED]> Datum: Sat, 17 Mar 2007 11:14:08 +0200 Aan: Manu Abraham <[EMAIL PROTECTED]> Aan: Manu Abraham <[EMAIL PROTECTED]> Hi Manu, Here is a bugfix for gpio_set_bits(). What do you think about this bugfix? The bug is that the function is only able to turn the given bit on, but it can never turn a bit off. My patch fixes that issue. With my patched version gpio_set_bits is able to turn a single bit on or off. I haven't verified that it actually does turn the device's power off when requested. I tested only rmmod and insmod. It seems to work with this version: I haven't seen a lost frontend. Regards, Marko Ristola This patch solves also the modulation change problem (18v or 13v). I can now receive and scan the same channels as the Windows driver is capable of. I still have the problem that the driver cannot tune to all available channels on a satellite. The windows driver has the same problem. Could this be a problem of the card? Regards, Michel. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: Re: [linux-dvb] DVB-H and dvbnet / MAC-broadcast address
Hi to everyone Provided that I managed to receive the ESG bootstrap descriptors, to identify the multicast address the ESG is transmitted on and to receive the IP packets on the corresponding PID, I'm not able to decode the ESG containers carried on it. The main problem is that the ESG I'm trying to decode is BiM encoded: could someone tell me how decode it or how to address this problem in some other way? I mean, if the .sdp files are carried within ESG containers, is it absolutely necessary to decode them or there's some way to identify them and skip the ESG decoding? Moreover, I've read that .sdp files describing the streaming sessions could be transmitted directly over FLUTE sessions, without being encapsulated into ESG containers... Is this true? And, in case it were, would the .sdp files directly announced in FLUTE FDT instances? Thank you Giovanni --- -- Initial Header --- >From : [EMAIL PROTECTED] To : linux-dvb@linuxtv.org Cc : Date : Fri, 30 Mar 2007 14:38:16 +0200 Subject : Re: [linux-dvb] DVB-H and dvbnet / MAC-broadcast address Dietmar Zlabinger wrote: > Hi, > > I am looking for help on receiving DVB-H. > I get to the point where the encapsulated IP is attached to a network > interface (as dvb0_0 using dvbnet -p ). At this stage I am > able to dump the UDP-packets received using tcpdump. But I am not able > to get that IP-multicast into VLC. > > I believe the problem is related to the fact that normally > IP-multicast uses the Ethernet broadcast address (ff:ff...) while in > dvb-h the destination mac is (partly) replaced by the dvb-h time > slicing information . Therefore the traffic is only received by the > network interface when it is in promiscuous mode (when using tcpdump), > but not when a normal program (like vlc) is trying to get multicast > frames out of it. > > My idea then was to modify dvbnet so that it replaces the "broken" > ethernet destination (is contains timeslicing-infos) by "ff:ff" so > that it goes through the network interface. But the actual code of > dvbnet does actually not handle the received data, the only thing that > program does is some ioctl(fd_net). > > Any idea who I could get the ethernet-multicast out even when the > destination mac is wrong? > Any idea how I could modify (the kernel) so that I could overwrite the > faulty mac? > > I could not find any description on how to receive dvb-h on the web. > The are some mailing on how to find SDP files, but that was not such a > big thing (dvbsnoop -b ..). > > > Thanks for help, > > Dietmar premitting that I have very little confidence with networking in general... if you run $ ifconfig dvb0_0 ip/mask promisc up $ route add -net 224.0.0.0/4 dev dvb0_0 you shouldn't need to tamper with the MAC addresses. You can also use smcrouted to re-route the tuple src_ip->dest_ip from dvb0_0 to eth0 (although I find it annoying having to know the source ip). I ad dvb-h working in both manners. -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Refill s.r.l. - Cartucce compatibili e kit di ricarica per >tutti i modelli di stampante. Acquista al telefono o online: >consegna in tutta Italia in 48 ore! > Clicca qui: >http://adv.email.it/cgi-bin/foclick.cgi?mid=5190&d=30-3 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb -- Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom http://click.libero.it/infostrada ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] compile TT3200 driver
Hi, I read all the stuff about the tt3200 during the last days... i.e. http://linuxtv.org/hg/~manu/stb0899-c5 make_myconfig.pl but... how does the driver know which kernel to apply to? I now copied the .config file to the root of the driver directory. now it prints the path to the kernel source... but it still does not work. make[2]: Entering directory `/usr/src/linux-source-2.6.20.4' ERROR: Kernel configuration is invalid. include/linux/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. WARNING: Symbol version dump /usr/src/linux-source-2.6.20.4/Module.symvers is missing; modules will have no dependencies and modversions. thanks, Jan -- "Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ... Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb