[linux-dvb] mantis driver development
hy, one quick question. does anybody know how is developing the digitalrise (twinhan) mantis driver ? there are 2 snapshots available: http://www.digitalrise.biz/support/downloads/index.php?action=file&id=186 (newer with VP-1041 support) & http://www.jusst.de/manu/mantis-v4l-dvb.tar.bz2 are these 2 diffrent projects or is manu developing for digitalrise (twinhan) ? regards, gernot ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] KNC1 DVB-S2 Plus, Satelco DVB-S2, TT S2 3200, Technisat DVB-S2
hy, is there a updated mantis snapshot available that is compatible with the multiproto hg tree? i'd like to see my VP-1041 tunning faster (not 35 seconds)... thx, notz On Saturday 29 September 2007 02:29:16 Manu Abraham wrote: > Hi folks, > > I have pushed out a tree containing support for the mentioned hardware. > Please note, support is still incomplete. Still much more to happen. > > NOTE: Still in BETA stage. > > Please collect all your issues, will go through one by one. I can go > through the issues one by one only, so please bear with me. > > The hacked szap is here http://abraham.manu.googlepages.com/szap.c > > I would like to know the issues you face. Some people have said that the > STB0899 tunes and LOCK's incredibly faster than any of the demodulator > drivers we have. > > Would like to verify this as well. I am wondering whether this is too good > to believe. > > Please give it a go. > Testers, please give results with the stb0899 module with verbose=5 module > parameter by the way i forgot to mention the tree. > http://jusst.de/hg/multiproto Please change the subject to reflect the > hardware you have, for getting back results. > > Will get some sleep now. > > Regards, > Manu > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] mantis branch on jusst.de - vp1034 can't tune to vertical channels
hy, i got trough warranty issues for my old vp1030 a new vp1034. i tried this card now with this branch but the card can only tune to vertical channels (horizontal are working in less than a second). zapping to 5 'Pro7': sat 0, frequency = 12051 MHz V, symbolrate 2750, vpid = 0x00a1, apid = 0x0054 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal ff95 | snr ff03 | ber 014a | unc 00ff | status 01 | signal ff96 | snr ff02 | ber 012a | unc 0002 | status 01 | signal ff95 | snr ff02 | ber 0155 | unc | status 01 | signal ff97 | snr ff02 | ber 00fa | unc 0001 | status 01 | signal ff95 | snr ff02 | ber 0119 | unc | status 01 | signal ff96 | snr ff02 | ber 014b | unc 0002 | status 01 | signal ff95 | snr ff02 | ber 00fd | unc 00ff | status 01 | signal ff96 | snr ff02 | ber 0111 | unc 0001 | attached is my dmesg output. in the same situation the vp1041 has no troubles to tune. notz dmesg.txt.gz Description: GNU Zip compressed data ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] mantis branch on jusst.de - vp1034 can't tune to vertical channels
thank you, the patch is working for me. the time from starting initalizaiton until i get a lock is about ~400msec. notz On Sunday 14 October 2007 19:18:18 Manu Abraham wrote: > Gernot Pansy wrote: > > hy, > > > > i got trough warranty issues for my old vp1030 a new vp1034. i tried this > > card now with this branch but the card can only tune to vertical channels > > (horizontal are working in less than a second). > > Uh. I forgot the GPIO bit flip from Marco, will apply it later, but to get > you going at the earliest Michel Verbraak has a cached copy, it should > apply cleanly still. You should be going ahead quite fine. > > http://www.verbraak.org/mantis_gpio_set_bits_fix.patch > > After the same, can you pleas clock the LOCK 'ing time please ? I am > currently checking how much deviation i am having from the actual device > specifications in terms of LOCK 'ing time. > > Thanks for reporting. > > Manu ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] mantis branch on jusst.de - vp1034 can't tune to vertical channels
hmm, i see now there are other channels i can't tune to. like this one: zapping to 9 'TW1': sat 0, frequency = 12662 MHz H, symbolrate 2200, vpid = 0x03f2, apid = 0x03f3 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal ff9c | snr ff02 | ber 016c | unc 00fe | status 00 | signal ff9d | snr ff02 | ber 0166 | unc 00fc | status 00 | signal ff9d | snr ff02 | ber 0111 | unc 00fd | notz On Sunday 14 October 2007 21:27:11 Manu Abraham wrote: > Gernot Pansy wrote: > > thank you, the patch is working for me. > > > > the time from starting initalizaiton until i get a lock is about > > ~400msec. > > In the ideal case according to the vendor, it should have been 300 - 350 mS > max. But i guess 50 - 100mS deviation is peanuts compared to most other > demods. Well, looks quite ok. > > Also would like to know how much time it takes to LOCK on Low symbol rates. > > > Manu > > > notz > > > > On Sunday 14 October 2007 19:18:18 Manu Abraham wrote: > >> Gernot Pansy wrote: > >>> hy, > >>> > >>> i got trough warranty issues for my old vp1030 a new vp1034. i tried > >>> this card now with this branch but the card can only tune to vertical > >>> channels (horizontal are working in less than a second). > >> > >> Uh. I forgot the GPIO bit flip from Marco, will apply it later, but to > >> get you going at the earliest Michel Verbraak has a cached copy, it > >> should apply cleanly still. You should be going ahead quite fine. > >> > >> http://www.verbraak.org/mantis_gpio_set_bits_fix.patch > >> > >> After the same, can you pleas clock the LOCK 'ing time please ? I am > >> currently checking how much deviation i am having from the actual device > >> specifications in terms of LOCK 'ing time. > >> > >> Thanks for reporting. > >> > >> Manu > > > > ___ > > linux-dvb mailing list > > linux-dvb@linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb dmesg.txt.gz Description: GNU Zip compressed data ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] mantis branch on jusst.de - vp1034 can't tune to vertical channels
On Sunday 14 October 2007 23:40:22 you wrote: > Gernot Pansy wrote: > > hmm, i see now there are other channels i can't tune to. like this one: > > You really have a signal ? The frequency also seems quite a bit high > (although still in the spectrum) But the demodulator seems to think > that there is no signal at all. there have to be a signal, because i never had any troubles to tune to one of these channel with the vp1030 and vp1041. i have to verify, but it seems that these channels have all a low symbol rate. notz > > Maybe too much attenuation at that frequency due to cable and or > other larger capacitive reactance lumped, probably ? (in case such > a frequency exists, wild guesses ) > > Trying to guess why the demodulator thinks, no signal ... > > > [ 1022.316000] mb86a16_set_fe: freq=2062 Mhz, symbrt=22000 Ksps > [ 1022.316000] mb86a16_write: writing to [0x08],Reg[0x32],Data[0x02] > [ 1022.316000] mb86a16_write: writing to [0x08],Reg[0x06],Data[0xdf] > [ 1022.32] mantis start feed & dma > [ 1022.32] mb86a16_write: writing to [0x08],Reg[0x0a],Data[0x3d] > > --- Snip --- > > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x25],Data[0x01] > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x2b],Data[0xd4] > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x2c],Data[0x0f] > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x0c],Data[0x04] > [ 1022.424000] mb86a16_set_fe: NO -- SIGNAL > [ 1022.424000] sync_chk: Status = 00, > > > Manu ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] new dvb api - multiproto
hy, has anyone created already patch or is working on it for the changed and hopefully finally dvp api (http://just.de/hg/multiproto/ - should be commited very soon) that supports dvb-s2 cards? bye, notz ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] new dvb api - multiproto
upps, sorry for that mail - that's the wrong mailing list On Thursday 18 October 2007 10:27:24 Gernot Pansy wrote: > hy, > > has anyone created already patch or is working on it for the changed and > hopefully finally dvp api (http://just.de/hg/multiproto/ - should be > commited very soon) that supports dvb-s2 cards? > > bye, > notz > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] new multiproto api & old applications
hy, should a new multiproto DVB-S2 card work with old applications (of course only in DVB-S mode)? regards, gernot p.s.: sorry, for the question but i didn't find a answer on the ml ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Twinhan VP1041 and 64-bit FC6 troubles
hy, pherhaps you like to try this patch against the current multiproto branch on http://jusst.de/hg/multiproto/. http://pansy.at/gernot/twinhan-vp1041.diff.gz it's working much better for me. also it compiles with recent kernels. gernot p.s.: if you want to test it mythtv, youd could try this hack against current svn: http://pansy.at/gernot/mythtv-multiproto-hack.diff.gz On Saturday 06 October 2007 19:16:57 Simeon Simeonov wrote: > Hello everyone, > > I have hard time getting the VP1041 (Azureware AD-SP > 400) > to work properly with 64-bit FC6. I used the drivers > from > Twinhan web site. First compiled them with the stock > kernel-2.6.18-1.2798, then I tried with the latest > 2.6.22 -2 FC6 kernel. The drivers compile OK. They > also load just fine, the frontend is created and all > of the nodes in /dev/dvb* are created just fine. > The problem is when I try to use the interface - as > soon as I try to open the frontend I get kernel Oops. > It looks like stb0899 module is not happy about > something. > I've seen that some people are using the card - how > did you guys get it to work? Could it be the 64-bit > that is giving me problems? > > Thanks. > Simeon > > > > ___ >_ Shape Yahoo! in your own image. Join our Network Research Panel > today! http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 > > > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Twinhan VP1041 and 64-bit FC6 troubles
hy, i have updated my patch. now it's also based on the current mantis tree on jusst.de (much improved i2c code, so intialization & tunning is much faster) http://pansy.at/gernot/twinhan-vp1041-2.diff.gz gernot On Monday 12 November 2007 13:54:27 Gernot Pansy wrote: > hy, > > pherhaps you like to try this patch against the current multiproto branch > on http://jusst.de/hg/multiproto/. > > http://pansy.at/gernot/twinhan-vp1041.diff.gz > > it's working much better for me. also it compiles with recent kernels. > > gernot > > p.s.: > > if you want to test it mythtv, youd could try this hack against current > svn: > > http://pansy.at/gernot/mythtv-multiproto-hack.diff.gz > > On Saturday 06 October 2007 19:16:57 Simeon Simeonov wrote: > > Hello everyone, > > > > I have hard time getting the VP1041 (Azureware AD-SP > > 400) > > to work properly with 64-bit FC6. I used the drivers > > from > > Twinhan web site. First compiled them with the stock > > kernel-2.6.18-1.2798, then I tried with the latest > > 2.6.22 -2 FC6 kernel. The drivers compile OK. They > > also load just fine, the frontend is created and all > > of the nodes in /dev/dvb* are created just fine. > > The problem is when I try to use the interface - as > > soon as I try to open the frontend I get kernel Oops. > > It looks like stb0899 module is not happy about > > something. > > I've seen that some people are using the card - how > > did you guys get it to work? Could it be the 64-bit > > that is giving me problems? > > > > Thanks. > > Simeon > > > > > > > > _ > >__ _ Shape Yahoo! in your own image. Join our Network Research > > Panel today! > > http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 > > > > > > > > ___ > > linux-dvb mailing list > > linux-dvb@linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Twinhan VP1041 and 64-bit FC6 troubles
On Friday 14 December 2007 00:00:33 Hans Werner wrote: > I can confirm that Gernot's patch > http://pansy.at/gernot/twinhan-vp1041-3.diff.gz > is working for me for the Twinhan VP-1041 > (aka Azurewave AD-SP 400, and it looks like the Technisat SkyStar HD2 too.) hmm, good to hear. > > Kernel 2.6.22 (ubuntu gutsy). > > Scan found 1198 FTA TV and radio channels on Hotbird. Finds DVB-S and > DVB-S2 channels ok. > > Tuning with szap -i -r working fine (still have the hanging problem with > szap -r but interactive mode is ok). > > DVB-S: > Tuning between channels in 2-7 seconds. > Playing fine with mplayer. Reception seems solid. > > DVB-S2: > was able to tune and lock several DVB-S2 HD channels on Astra 19degE > (though not always first time). Dumped out a few files from ASTRA HD+ (FTA) > -- when played with mplayer I hear the audio but see no video. Don't know > if the files are actually ok yet. i think you have to use a recent mplayer/ffmpeg combination to watch the german dvb-s2 channels. i have no troubles to tune the german fta dvb-s2 channels. gernot > > Many thanks Gernot. > > Hans > > > Gernot, > > thanks, I have tried your second patch from > > http://pansy.at/gernot/twinhan-vp1041-2.diff.gz > > and could successfully see one dvb-s channel on my Twinhan VP-1041, but > > when I use szap -r to view the channel it hangs in a way that I can't > > kill (it becomes a process in state D, i.e. uninterruptible sleep). So I > > can't change channels and have to reboot. I didn't try dvb-s2 yet. > > > > Here is what I did -- perhaps you can see something wrong: > > > > a)kernel 2.6.20 stock ubuntu feisty, amd-64bit > > > > b)used your patch to patch multiproto commit 0f3e5ce65e32 > > > > c)there was one file missing from your patch (cu1216_regs.h) so I copied > > it from the driver on twinhan's website v1.4.2 > > > > d)compiled patched multiproto and installed successfully > > > > e)obtained scan from http://jusst.de/manu/scan.tar.bz2 and slotted in the > > util/scan directory of hg http://linuxtv.org/hg/dvb-apps/. I fixed up the > > .h includes to come from the earlier multiproto compilation. > > > > f)obtained szap.c from http://abraham.manu.googlepages.com/szap.c and > > compiled it in util/szap according to > > http://www.linuxtv.org/pipermail/linux-dvb/2007-October/021474.html > > > > (messy -- is there a "dvb-apps for multiproto" tree somewhere?) > > > > scan seems to work fine to create a channels.conf. > > Then to view a channel I did: > > szap -r -a 0 -l UNIVERSAL -t 0 -c channels.conf "channelname" > > and then > > mplayer - < /dev/dvb/adapter0/dvr0 > > > > szap tunes and locks and I get video and audio from mplayer but after > > that I cannot kill it (with ctrl-c or kill) to change to another channel. > > > > Any idea what's wrong? > > What's the best way to view channels? > > Are you merging your code into multiproto? > > > > Regards, > > Hans > > > > > hy, > > > > > > i have updated my patch. now it's also based on the current mantis tree > > > > on > > > > > jusst.de (much improved i2c code, so intialization & tunning is much > > > > faster) > > > > > http://pansy.at/gernot/twinhan-vp1041-2.diff.gz > > > > > > gernot > > > > > > On Monday 12 November 2007 13:54:27 Gernot Pansy wrote: > > >> hy, > > >> > > >> pherhaps you like to try this patch against the current multiproto > > > > branch > > > > >> on http://jusst.de/hg/multiproto/. > > >> > > >> http://pansy.at/gernot/twinhan-vp1041.diff.gz > > >> > > >> it's working much better for me. also it compiles with recent kernels. > > >> > > >> gernot > > >> > > >> p.s.: > > >> > > >> if you want to test it mythtv, youd could try this hack against > > >> current svn: > > >> > > >> http://pansy.at/gernot/mythtv-multiproto-hack.diff.gz > > >> > > >> On Saturday 06 October 2007 19:16:57 Simeon Simeonov wrote: > > >> > Hello everyone, > > >> > > > >> > I have hard time getting the VP1041 (Azureware AD-SP > > >> > 400) > > >> > to work properly with 64-bit FC6. I used the drivers > > >> > from > > >> > Twinhan web site. First compiled them with the stock > > &
Re: [linux-dvb] MythTV and multiproto API works!
On Monday 07 January 2008 21:32:20 Mario Smit wrote: > To all, > > We can already use VDR on our multiproto cards (thanks to Reinhard and > others). > > But, for everyone who likes to use MythTV I have good news! i have already made a hack for mythtv. this one also works with DVB-S2 channels. http://www.mail-archive.com/linux-dvb%40linuxtv.org/msg27517.html regards, gernot > > With the following patch you can watch TV using the multiproto API. I am > currently zapping around with my TT3200 and it works great. :) > > I must admin that this patch is not what I call a real patch, it is more > a quick hack and it currently only supports DVB-S. I intend to support > DVB-S2 soon with a clean (configurable) approach within MythTV. Further, > the Channel Scanner (in mythtv-setup) once in the 3 times crashes on me > so you have to be persistent if you want to automatically scan the > channels. I am unsure if this is driver or a Myth problem. > > For everybody who cannot wait, please use the supplied patch on one of > the latest SVN builds (revision 15220). I am very interested to have > your feedback/results. > > Best regards, > > Mario Smit ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Help with Skystar HD2 (Twinhan VP-1041/Azurewave AD SP400 rebadge)
hy, the wiki is not up2date. Twinhan VP-1041 support is now in the mantis tree (inkl. multiproto) hg clone http://jusst.de/hg/mantis but for me, the old initialization parameters works much better. with the new ones i get only a destructed picture (unwatchable). gernot On Monday 18 February 2008 20:05:03 Tim Hewett wrote: > I'm trying to get a new Technisat Skystar HD2 working. It looks like > it is a Twinhan VP-1041/Azurewave AD SP400 rebadge. > > The card hardware and satellite feed has been confirmed to work ok > under Windows using Technisat's software. > > I am using the current multiproto DVB drivers, downloaded today. These > were patched, built and installed successfully as described for the > Azurewave AD SP400 in the linuxdvb wiki, but the card was not > recognised on bootup even though it was allocated a DVB adaptor > number. This appeared in dmesg: > > [ 57.359723] found a UNKNOWN PCI UNKNOWN device on (01:06.0), > [ 57.359802] Mantis Rev 1 [1ae4:0001], irq: 16, latency: 32 > [ 57.359858] memory: 0xe510, mmio: 0xc20fc000 > [ 57.363015] MAC Address=[00:08:c9:e0:26:92] > [ 57.363133] mantis_alloc_buffers (0): DMA=0x1b7a > cpu=0x81001b7a size=65536 > [ 57.363242] mantis_alloc_buffers (0): RISC=0x1ae24000 > cpu=0x81001ae24000 size=1000 > [ 57.363348] DVB: registering new adapter (Mantis dvb adapter) > > > This is the output of lspci -vvn: > > 01:06.0 0480: 1822:4e35 (rev 01) > Subsystem: 1ae4:0001 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 32 (2000ns min, 63750ns max) > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at e510 (32-bit, prefetchable) [size=4K] > > This is the output of lsusb -vv: > > 01:06.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV > PCI Bridge Controller [Ver 1.0] (rev 01) > Subsystem: Unknown device 1ae4:0001 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR-Latency: 32 (2000ns min, 63750ns max) > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at e510 (32-bit, prefetchable) [size=4K] > > Note that subsystem IDs 1ae4:0001 are different to those listed in the > wiki for the Azurewave (1822:0031). > > I changed #define MANTIS_VP_1041_DVB_S2 in linux/drivers/media/dvb/ > mantis/mantis_vp1041.h from 0x0031 to 0x0001, which changed the dmesg > output on reboot to this: > > [ 59.546375] found a VP-1041 PCI DVB-S/DVB-S2 device on (01:06.0), > [ 59.546456] Mantis Rev 1 [1ae4:0001], irq: 16, latency: 32 > [ 59.546512] memory: 0xe510, mmio: 0xc20fc000 > [ 59.549609] MAC Address=[00:08:c9:e0:26:92] > [ 59.549719] mantis_alloc_buffers (0): DMA=0x1b7b > cpu=0x81001b7b size=65536 > [ 59.549827] mantis_alloc_buffers (0): RISC=0x1af43000 > cpu=0x81001af43000 size=1000 > [ 59.549933] DVB: registering new adapter (Mantis dvb adapter) > [ 60.137583] stb0899_attach: Attaching STB0899 > [ 60.137665] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 > frontend @0x68 > [ 60.152161] stb6100_attach: Attaching STB6100 > [ 60.168021] DVB: registering frontend 3 (STB0899 Multistandard)... > > So that change seemed to cause the card to be recognised. > > Then I tried the replacement scan and szap as suggested by the > Azurewave wiki, but the card will not tune. > > So it appears to be almost working, but I'm not sure what tests to try > or changes to make to see if it will work. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Help with Skystar HD2 (Twinhan VP-1041/Azurewave AD SP400 rebadge)
hy, have you tried some other channel on a diffrent multiplex? i have also troubles on 2 multiplexes, but i believe that's trough my bad signal strength (it's the same on windows). otherwise there have to be some initialization registers configured differently. manu is the only guy, how knows about that and can help you. gernot On Tuesday 19 February 2008 00:51:49 Tim Hewett wrote: > Gernot, > > I have now tried the mantis tree. It also needed the > MANTIS_VP_1041_DVB_S2 #define to be changed to 0x0001 for this card, > but after doing that it was recognised: > > [ 56.586237] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > [ 56.586330] ACPI: PCI Interrupt :01:06.0[A] -> Link [APC1] -> > GSI 16 (level, low) -> IRQ 16 > [ 56.586556] irq: 16, latency: 32 > [ 56.586557] memory: 0xe510, mmio: 0xc20f8000 > [ 56.586708] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0), > [ 56.586791] Mantis Rev 1 [1ae4:0001], irq: 16, latency: 32 > [ 56.586847] memory: 0xe510, mmio: 0xc20f8000 > [ 56.589867] MAC Address=[00:08:c9:e0:26:92] > [ 56.589972] mantis_alloc_buffers (0): DMA=0x1aa1 > cpu=0x81001aa1 size=65536 > [ 56.590081] mantis_alloc_buffers (0): RISC=0x1b7f > cpu=0x81001b7f size=1000 > [ 56.590187] DVB: registering new adapter (Mantis dvb adapter) > [ 57.106676] stb0899_write_regs [0xf1b6]: 02 > [ 57.107730] stb0899_write_regs [0xf1c2]: 00 > [ 57.108781] stb0899_write_regs [0xf1c3]: 00 > [ 57.110884] _stb0899_read_reg: Reg=[0xf000], data=82 > [ 57.110964] stb0899_get_dev_id: ID reg=[0x82] > [ 57.111040] stb0899_get_dev_id: Device ID=[8], Release=[2] > [ 57.117425] _stb0899_read_s2reg Device=[0xf3fc], Base > address=[0x0400], Offset=[0xf334], Data=[0x444d4431] > [ 57.123732] _stb0899_read_s2reg Device=[0xf3fc], Base > address=[0x0400], Offset=[0xf33c], Data=[0x0001] > [ 57.123735] stb0899_get_dev_id: Demodulator Core ID=[DMD1], > Version=[1] > [ 57.130121] _stb0899_read_s2reg Device=[0xfafc], Base > address=[0x0800], Offset=[0xfa2c], Data=[0x46454331] > [ 57.136428] _stb0899_read_s2reg Device=[0xfafc], Base > address=[0x0800], Offset=[0xfa34], Data=[0x0001] > [ 57.136430] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] > [ 57.136509] stb0899_attach: Attaching STB0899 > [ 57.136586] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 > frontend @0x68 > [ 57.136690] stb6100_attach: Attaching STB6100 > [ 57.137118] DVB: registering frontend 1 (STB0899 Multistandard)... > > However it still doesn't tune. e.g.: > > [EMAIL PROTECTED]:~/linuxtv-dvb-apps-1.1.1/util/szap# ./szap -r -p -l > UNIVERSAL -t 0 -a 1 BBC1West > reading channels from file '/root/.szap/channels.conf' > zapping to 1 'BBC1West': > sat 0, frequency = 10818 MHz V, symbolrate 2200, vpid = 0x0901, > apid = 0x0904 sid = 0x0002 > Querying info .. Delivery system=DVB-S > using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' > --> Using 'STB0899 DVB-S' DVB-S > do_tune: API version=3, delivery system = 0 > do_tune: Frequency = 1068000, Srate = 2200 > do_tune: Frequency = 1068000, Srate = 2200 > > > Whereas this is the result when using an ordinary Skystar 2 card > (which works fine): > > [EMAIL PROTECTED]:~/linuxtv-dvb-apps-1.1.1/util/szap# ./szap -r -p -l > UNIVERSAL -t 0 -a 0 BBC1West > reading channels from file '/root/.szap/channels.conf' > zapping to 1 'BBC1West': > sat 0, frequency = 10818 MHz V, symbolrate 2200, vpid = 0x0901, > apid = 0x0904 sid = 0x0002 > Querying info .. Delivery system=DVB-S > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > --> Using 'ST STV0299 DVB-S' DVB-S > do_tune: API version=3, delivery system = 0 > do_tune: Frequency = 1068000, Srate = 2200 > do_tune: Frequency = 1068000, Srate = 2200 > > > couldn't find pmt-pid for sid 0002 > status 1f | signal cac8 | snr cb6d | ber 61d0 | unc | > FE_HAS_LOCK > status 1f | signal c9f0 | snr d15e | ber | unc | > FE_HAS_LOCK > status 1f | signal ca1d | snr d176 | ber | unc | > FE_HAS_LOCK > > > Using szap on the Skystar HD2 caused lots of logs to dmesg: > > [ 97.691029] stb0899_search: set DVB-S params > [ 97.691112] stb0899_search: delivery system=1 > [ 97.691188] stb0899_search: Frequency=1068000, Srate=2200 > [ 97.691269] stb0899_search: Parameters IN RANGE > [ 97.692611] _stb0899_read_reg: Reg=[0xf1c2], data=20 > [ 97.694085] _stb0899_read_reg: Reg=[0xf1c3], data=00 > [ 97.694166] stb0899_set_delsys: Delivery System -- DVB-S > [ 97.695848] _stb0899_read_reg: Reg=[0xf533], data=01 > [ 97.695929] stb0899_write_regs [0xf533]: 09 > [ 97.697420] stb0899_write_regs [0xf548]: b1 > [ 97.698913] stb0899_write_regs [0xf549]: 40 > [ 97.700410] stb0899_write_regs [0xf54a]: 42 > [ 97.701778] stb0899_write_regs [0xf54b]: 12 > [ 97.704225] _stb0
Re: [linux-dvb] Patching MythTV in order to use it with multiproto
the hack is against svn trunk (0.21 branch is also working). here you will find the latest one: http://notz.homelinux.com/99_mythtv_multiproto_hack.dpatch gernot On Saturday 08 March 2008 12:47:00 David BERCOT wrote: > Hi, > > On Debian, I've downloaded the source version of MythTV : > v0.20.2.svn20080126. Then, I've downloaded the patch from > http://pansy.at/gernot/mythtv-multiproto-hack.diff.gz > > But, when I try to apply it, I have these errors : > # patch <./mythtv-multiproto-hack.diff -p0 > patching file libs/libmythtv/dvbchannel.cpp > Hunk #1 FAILED at 138. > Hunk #2 succeeded at 146 (offset -11 lines). > Hunk #3 FAILED at 452. > Hunk #4 FAILED at 509. > Hunk #5 succeeded at 586 with fuzz 1 (offset 19 lines). > Hunk #6 FAILED at 625. > Hunk #7 succeeded at 670 (offset 19 lines). > Hunk #8 succeeded at 800 (offset -33 lines). > Hunk #9 FAILED at 850. > 5 out of 9 hunks FAILED -- saving rejects to file > libs/libmythtv/dvbchannel.cpp.rej > > Do have any idea to resolve these errors ? > > Thank you very much. > > David. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
