Re: [linux-dvb] HVR4000 DVB-S2 - What am I doing wrong ;-)
Maybe I can try with VDR again now as it seems like I can get a lock! Yes, I'm strictly recommend you to install the latest vdr 1.5.12 version with today's greatest h.264 + dvb-s2 patches from Reinhard Nissl http://linuxtv.org/pipermail/vdr/2008-January/014956.html @Reinhard thanks a lot of for your hardest h.264's implementation in VDR project Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] HVR4000 DVB-S2 - What am I doing wrong ;-)
I patched with this new patch from 2007-12-15 instead. right make all; is there any warning during compilation ? ../scan2 -t 2 SVT HD is it szap2 ??? anyway you have to use more option for szap2 -e: fec (1=1/2, 2=2/3, 3=3/4, 4=4/5, 5=5/6, 6=6/7, 8=8/9, 0=AUTO) -m: mod (q=QPSK, 8=8PSK) reading channels from file '/root/.szap/channels.conf' zapping to 3 'SVT HD': sat 1, frequency = 11421 MHz H, symbolrate 2500, vpid = 0x0200, apid have you diseqc ? is it possible to try connect the card to LNB directly, without diseqc ? cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... cx24116_firmware_ondemand: Waiting for firmware upload(2)... cx24116_load_firmware: FW version 1.20.79.0 cx24116_firmware_ondemand: Firmware upload complete dvb_frontend_ioctl: DVBFE_GET_INFO dvb_frontend_ioctl: FESTATE_RETUNE: fepriv-state=2 dvb_frontend_ioctl: DVBFE_GET_INFO dvb_frontend_ioctl: FESTATE_RETUNE: fepriv-state=2 where's did you download the firmware ? from here ? ftp://167.206.143.11/outgoing/Oxford/88x_2_117_24275_1_INF.zip Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] HVR4000 DVB-S2 - What am I doing wrong ;-)
where's did you download the firmware ? from here ? ftp://167.206.143.11/outgoing/Oxford/88x_2_117_24275_1_INF.zip sorry, it's wrong oldest link new one is ftp://167.206.143.11/outgoing/Oxford/88x_2_119_25023_WHQL.zip Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] How to scan C-Band Signal
Now i started using C-Band signal. did you connect C-band LNB to your dvb-s card ? do you use diseqc ? when i try the same command, it says tunning failed. why do you use the same command ? On Hotbird there's not any C-band transponders. Which satellites with C-band do you want watch ? so, anyway for C band you should use the option -l C-BAND for scan utilites goga:/usr/src/dvb-apps/util/scan# ./scan 80 -l C-BAND -v scanning 80 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 3525000 V 31106000 3 initial transponder 3558000 V 3215000 3 initial transponder 3562000 V 3225000 3 initial transponder 357 V 427 3 initial transponder 3576000 V 4275000 3 initial transponder 3582000 V 4285000 3 initial transponder 3588000 V 323 3 initial transponder 3625000 V 300 3 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] hvr4000 patch for your multiproto tree
Hi with new patch everything is ok, diseqc dvb-s2 are working thanks Igor thank you very much for your patch. But would you update your patch, because there's new version patch from Darron Broad http://dev.kewl.org/hauppauge/v4l-dvb-hg-2007-12-09.diff with very important diseqc-fix. I mean the DCL-fix (dynamic current limit for ISL6421) thanks for your attention, obviously I had some problems attaching the right file ;) Please remember, this patch currently only contains very minor changes to adopt Darrons driver to the multiproto interface. You still need the sysctls to switch between DVB-S and S2. Given that, I'm able to get a lock on S2 and S transponders with szap2 and VDR. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] initial tuning file for Astra 23.5E
is ther eany initial tuning file available for scanning the Astra 1E on 23.5E ? http://joshyfun.peque.org/transponders/kaffeine.html ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] hvr4000-news
t: 1196939665.526, c: 1, r: 0, a: -- t: 1196939665.526, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF) t: 1196939665.608, c: 1, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v = SEC_VOLTAGE_13) t: 1196939665.628, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, cmd-cmd) t: 1196939665.812, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b = SEC_MINI_B) t: 1196939665.832, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t = SEC_TONE_ON) t: 1196939665.898, c: 1, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, tuneto) couldn't find pmt-pid for sid 0382 how is it possible to see this debug information t: 1196939665.898, c: 1, r: 0, a: ioctl(fefd,FE_SET_FRONTEND, tuneto) and other ? Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] hvr4000-news
today Darron Broad have released new patch. It patch fully solved my problem with diseqc. Please, test it http://dev.kewl.org/hvr4000/v4l-dvb-hg-2007-12-06.diff News 6 dec 2007 === Some SYSCTL vars have been added for those wanting to test DVB-S2 yet do not want to or cannot use the abandoned hvr4000 repository. To use this feature you will need to setup the modfec/rolloff/pilot as described in the source file cx24116.c using SYSCTL(8) prior to running szap. Eg. for Pro7 HD on Astra 19.2E: # 8psk 2/3 sysctl dev.cx24116.modfec=0x0d sysctl dev.cx24116.pilot=1 sysctl dev.cx24116.rolloff=2 # channels.conf Pro 7 HD:12722:h:1:22000:255:259:10200 To reset the driver to DVB-S use: sysctl dev.cx24116.modfec=0xfe30 Update: sysctls moved from kernel. to dev. for 2.6.24-RC (?) ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] hvr4000-news
sorry, it's right link http://dev.kewl.org/hvr4000/v4l-dvb-hg-2007-12-06-FIX.diff thank you very much to Darron Broad today Darron Broad have released new patch. It patch fully solved my problem with diseqc. Please, test it http://dev.kewl.org/hvr4000/v4l-dvb-hg-2007-12-06.diff News 6 dec 2007 === Some SYSCTL vars have been added for those wanting to test DVB-S2 yet do not want to or cannot use the abandoned hvr4000 repository. To use this feature you will need to setup the modfec/rolloff/pilot as described in the source file cx24116.c using SYSCTL(8) prior to running szap. Eg. for Pro7 HD on Astra 19.2E: # 8psk 2/3 sysctl dev.cx24116.modfec=0x0d sysctl dev.cx24116.pilot=1 sysctl dev.cx24116.rolloff=2 # channels.conf Pro 7 HD:12722:h:1:22000:255:259:10200 To reset the driver to DVB-S use: sysctl dev.cx24116.modfec=0xfe30 Update: sysctls moved from kernel. to dev. for 2.6.24-RC (?) ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] szap2 snr/signal (hvr4000)
Hi I'm using szap2 from http://dev.kewl.org/hvr4000/ is it possible to apply the dB for signal and snr ? why for snr/ber/unc I can see only zero ? ./szap2 -c 60e -n1 -t0 -mq reading channels from file '60e' zapping to 1 'Kuban-RTV': sat 2, frequency = 11490 MHz V, symbolrate 5787000, vpid = 0x0064, apid = 0x0065 sid = 0x0001 (fec = -2147483648, mod = 2) Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' -- Using 'Conexant CX24116 DVB-S' DVB-S diseqc: sat_no:2 pol_vert:1 hi_band:0 cmd:e0 10 38 f8 wait:0 do_tune: API version=2, delivery system = 0 do_tune: Frequency = 174, Srate = 5787000 (DVB-S) do_tune: Frequency = 174, Srate = 5787000 (SET_PARAMS) status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal | snr | ber | unc | FE_HAS_LOCK status 03 | signal | snr | ber | unc | status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b333 | snr | ber | unc | FE_HAS_LOCK status 1f | signal b333 | snr | ber | unc | FE_HAS_LOCK status 1f | signal b333 | snr | ber | unc | FE_HAS_LOCK status 1f | signal b333 | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b333 | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK status 1f | signal b4cc | snr | ber | unc | FE_HAS_LOCK ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] dvbnet dvb-s2
Hi does dvbnet can work with dvb-s2 cards ? Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] DVB-S2 API vs. HVR4000: When?
Hi, Steven is it possible to discuss about HVR4000 in this mail list now ? There's several questions after some tests with this card Regards Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] HVR4000 - two questions
Hi 1) my hvr4000 with drivers from http://dev.kewl.org/hvr4000/hg/stoth/ can't lock some dvb-s transponders with high SR (more than 44000). SS1 on VDR, Dreambox 7000 work with this SR without any problem. (BTW, with low SR hvr4000 works very well) For example, Express 53E # scan 53 -v scanning 53 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 11044000 V 44953000 3 tune to: 11044:v:0:44953 DiSEqC: switch pos 0, 13V, loband (index 0) DVB-S IF freq is 1294000 tuning status == 0x01 tuning status == 0x01 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x01 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 WARNING: tuning failed!!! tune to: 11044:v:0:44953 (tuning failed) DiSEqC: switch pos 0, 13V, loband (index 0) DVB-S IF freq is 1294000 tuning status == 0x01 tuning status == 0x03 tuning status == 0x01 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 tuning status == 0x01 WARNING: tuning failed!!! tune to: 11096:v:0:6400 the same situation with Express 80E # scan 80 -v scanning 80 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 10973000 V 000 3 initial transponder 10991000 V 000 3 initial transponder 11044000 H 44948000 5 initial transponder 11606000 V 44948000 5 tune to: 10973:v:0: DiSEqC: switch pos 0, 13V, loband (index 0) DVB-S IF freq is 1223000 tuning status == 0x1f PAT PMT 0x1079 for service 0x0001 SDT (actual TS) 0x 0x0001: pmt_pid 0x1079 Scopus Network Technologies -- ENISEY-REGION (running) NIT (actual TS) Network Name 'Scopus' tune to: 10991:v:0: DiSEqC: switch pos 0, 13V, loband (index 0) DVB-S IF freq is 1241000 tuning status == 0x1f PAT PMT 0x0400 for service 0x0014 PMT 0x0200 for service 0x0012 SDT (actual TS) 0x 0x0012: pmt_pid 0x0200 CRCTRC-11 -- OTC (running) WARNING: filter timeout pid 0x0500 WARNING: filter timeout pid 0x0010 tune to: 11044:h:0:44948 DiSEqC: switch pos 0, 18V, loband (index 1) DVB-S IF freq is 1294000 tuning status == 0x01 tuning status == 0x01 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 WARNING: tuning failed!!! tune to: 11044:h:0:44948 (tuning failed) DiSEqC: switch pos 0, 18V, loband (index 1) DVB-S IF freq is 1294000 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x01 WARNING: tuning failed!!! tune to: 11606:v:0:44948 DiSEqC: switch pos 0, 13V, loband (index 0) DVB-S IF freq is 1856000 tuning status == 0x01 tuning status == 0x03 tuning status == 0x01 tuning status == 0x01 tuning status == 0x01 tuning status == 0x03 tuning status == 0x01 tuning status == 0x01 tuning status == 0x01 tuning status == 0x01 WARNING: tuning failed!!! tune to: 11606:v:0:44948 (tuning failed) DiSEqC: switch pos 0, 13V, loband (index 0) DVB-S IF freq is 1856000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x01 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! dumping lists (4 services) Done. 2) My diseqc switch didn't operate by A/A input with diseqc commands from hvr4000. tune to: 11044:v:0:44953 DiSEqC: switch pos 0, 13V, loband (index 0) tune to: 11606:v:0:44948 (tuning failed) DiSEqC: switch pos 0, 13V, loband (index 0) Now I temporary removed my diseqc switch. Is there any ideas ? regards Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] can't compile dvb-apps from today's hg
Hi I have debian testing with uname -r 2.6.22-2-686 and with linux-headers-2.6.22-2 I tried to compile today's version of dvb-apps, but without luck # make make -C lib all make[1]: Entering directory `/usr/src/dvb-apps/lib' make -C libdvbapi all make[2]: Entering directory `/usr/src/dvb-apps/lib/libdvbapi' CC dvbaudio.o CC dvbca.o CC dvbdemux.o CC dvbfe.o CC dvbnet.o CC dvbvideo.o In file included from dvbvideo.c:28: /usr/include/linux/dvb/video.h:105: error: expected specifier-qualifier-list before '__u32' /usr/include/linux/dvb/video.h:161: error: expected ':', ',', ';', '}' or '__attribute__' before '*' token /usr/include/linux/dvb/video.h:194: error: expected ':', ',', ';', '}' or '__attribute__' before '*' token make[2]: *** [dvbvideo.o] Ошибка 1 make[2]: Leaving directory `/usr/src/dvb-apps/lib/libdvbapi' make[1]: *** [all] Ошибка 2 make[1]: Leaving directory `/usr/src/dvb-apps/lib' make: *** [all] Ошибка 2 is it possible to help me ? Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] scan of dvb-s h.264 transponder
Hi On satellite Express 40E http://www.lyngsat.com/eam1.html there's Russian package with h.264 dvb-s open channels. It's not hdtv channels , it's channels with standard definition. I tried to use scan ~/.szap# scan -v 0400.ini scanning 0400.ini using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 10995000 V 2000 9 initial transponder 10967000 V 2000 9 initial transponder 11097000 H 400 9 initial transponder 11159000 V 3332000 9 tune to: 10995:v:0:2 DiSEqC: switch pos 0, 13V, loband (index 0) tuning status == 0x1f PAT PMT 0x0122 for service 0x0031 PMT 0x0124 for service 0x0032 PMT 0x0121 for service 0x0030 PMT 0x010d for service 0x000d PMT 0x0125 for service 0x0033 PMT 0x0126 for service 0x0034 PMT 0x0117 for service 0x0017 PMT 0x0116 for service 0x0016 PMT 0x0114 for service 0x0014 PMT 0x0110 for service 0x0010 PMT 0x010f for service 0x000f PMT 0x010e for service 0x000e PMT 0x0113 for service 0x0013 PMT 0x0112 for service 0x0012 PMT 0x0115 for service 0x0015 PMT 0x0111 for service 0x0011 PMT 0x0120 for service 0x002b SDT (actual TS) 0x 0x0033: pmt_pid 0x0125 RSCC -- Radio Zvezda (running) 0x 0x0034: pmt_pid 0x0126 RSCC -- Golos Rossii (running) 0x 0x000d: pmt_pid 0x010d RSCC -- 1 Kanal (running) 0x 0x002b: pmt_pid 0x0120 RSCC -- Mayak (running) 0x 0x000e: pmt_pid 0x010e RSCC -- Russia (running) 0x 0x0030: pmt_pid 0x0121 RSCC -- Radio Rossii (running) 0x 0x000f: pmt_pid 0x010f RSCC -- Kultura (running) 0x 0x0031: pmt_pid 0x0122 RSCC -- Radio Kultura (running) 0x 0x0010: pmt_pid 0x0110 RSCC -- STS (running) 0x 0x0011: pmt_pid 0x0111 RSCC -- Muz TV (running) 0x 0x0032: pmt_pid 0x0124 RSCC -- Love Radio (running) 0x 0x0012: pmt_pid 0x0112 RSCC -- 2x2 (running) 0x 0x0013: pmt_pid 0x0113 RSCC -- TNV (running) 0x 0x0014: pmt_pid 0x0114 RSCC -- Home (running) 0x 0x0015: pmt_pid 0x0115 RSCC -- TV Centr (running) 0x 0x0016: pmt_pid 0x0116 RSCC -- RTR Sport (running) 0x 0x0017: pmt_pid 0x0117 RSCC -- 5 Kanal (running) NIT (actual TS) Network Name 'RSCC' tune to: 10967:v:0:2 DiSEqC: switch pos 0, 13V, loband (index 0) tuning status == 0x1f PAT PMT 0x0119 for service 0x0029 PMT 0x0106 for service 0x0006 PMT 0x0104 for service 0x0004 PMT 0x0103 for service 0x0003 PMT 0x0102 for service 0x0002 PMT 0x0101 for service 0x0001 PMT 0x0540 for service 0x0069 PMT 0x0530 for service 0x0068 PMT 0x0510 for service 0x0066 PMT 0x0500 for service 0x0065 PMT 0x010b for service 0x000b PMT 0x010a for service 0x000a PMT 0x0520 for service 0x0067 PMT 0x0109 for service 0x0009 PMT 0x0105 for service 0x0005 PMT 0x0108 for service 0x0008 PMT 0x011a for service 0x002a PMT 0x0107 for service 0x0007 SDT (actual TS) 0x 0x0001: pmt_pid 0x0101 RSCC -- Dom Kino (running) 0x 0x0002: pmt_pid 0x0102 RSCC -- Vremya (running) 0x 0x0003: pmt_pid 0x0103 RSCC -- Telenyanya (running) 0x 0x0004: pmt_pid 0x0104 RSCC -- 1MUZ (running) 0x 0x0065: pmt_pid 0x0500 RMG -- RSN (running) 0x 0x0066: pmt_pid 0x0510 RMG -- DFM_REGION (running, scrambled) 0x 0x0067: pmt_pid 0x0520 RMG -- RUSSIAN_RADIO (running) 0x 0x0068: pmt_pid 0x0530 RMG -- HIT_FM (running) 0x 0x0069: pmt_pid 0x0540 RMG -- MAXIMUM (running) 0x 0x0005: pmt_pid 0x0105 RSCC -- 5 Kanal (running) 0x 0x0006: pmt_pid 0x0106 RSCC -- Russia Double-4 (running) 0x 0x0029: pmt_pid 0x0119 RSCC -- Radio Rossii D4 (running) 0x 0x0007: pmt_pid 0x0107 RSCC -- Orbita-4 (running) 0x 0x002a: pmt_pid 0x011a RSCC -- Yunost (running) 0x 0x0008: pmt_pid 0x0108 RSCC -- TV Centr (running) 0x 0x0009: pmt_pid 0x0109 RSCC -- Vesti (running) 0x 0x000a: pmt_pid 0x010a RSCC -- Home+2 (running) 0x 0x000b: pmt_pid 0x010b RSCC -- 7 TV (running) NIT (actual TS) Network Name 'RSCC' tune to: 11097:h:0:4000 DiSEqC: switch pos 0, 18V, loband (index 1) tuning status == 0x03 tuning status == 0x03 tuning status == 0x1f PAT PMT 0x0101 for service 0x0001 PMT 0x0101 for service 0x0002 SDT (actual TS) 0x 0x0001: pmt_pid 0x0101 (null) -- TV (running) 0x 0x0002: pmt_pid 0x0101 (null) -- FM (running) NIT (actual TS) tune to: 11159:v:0:3332 DiSEqC: switch pos 0, 13V, loband (index 0) tuning status == 0x1f PAT PMT 0x0020 for service 0x0001 SDT (actual TS) 0x 0x0001: pmt_pid 0x0020 TANDBERG -- SPACE TV AZERBAIJAN (running) NIT (actual TS) Network Name 'TANDBERG' tune to: 10993:v:0:2 DiSEqC: switch pos 0, 13V, loband (index 0) tuning status == 0x1f PAT PMT 0x0125 for service 0x0033 PMT 0x0120 for service 0x002b PMT 0x010d for service 0x000d PMT 0x0122 for service 0x0031 PMT 0x0121 for service 0x0030 PMT 0x010e for service 0x000e PMT 0x0126 for service 0x0034 PMT 0x0110 for service 0x0010 PMT 0x0117 for service 0x0017 PMT 0x0116 for service 0x0016 PMT 0x010f for service 0x000f PMT 0x0115 for service 0x0015 PMT 0x0114 for service 0x0014 PMT 0x0113 for service 0x0013 PMT 0x0112 for service 0x0012 PMT 0x0124 for service 0x0032 PMT
[linux-dvb] HVR4000 - several questions
Hi on http://www.tbc.ru/index.php?option=com_contenttask=viewid=36Itemid=31 I read about supported FEC Rates 1/2, 2/3, 3/4, 5/6, 7/8 - and what about fec = 9/10 - is it supported ? on http://www.hauppauge.co.uk/pages/products/data_hvr4000.html I read about DiSEqC 1.0 supported , and what about other version - 1.1, 1.2 ? is it possible to connect to card the motor for dish, diseqc-commutator and 2 LNB - for C and Ku bands in the same time ? which max current can be between this card and motor or LNB ? 400 ma ? why need automatic DVBS2 pilot support ? what's mean pilot function ? is it possible to capture on harddisc the analog video-signal, connected to s-video or composite video input in HVR4000 ? is it possible to capture and to record on hdd the analog terrestrial broadcasting ? regards Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Hauppauge HVR-4000
HVR-4000 at the moment please? I'm using Steve's driver (thanks for the work on this Steve) and can get DVB-S/2 perfectly, including BBC-HD. I'm now could you say - which CPU and the graphic card do you use for HDTV watching ? what about CPU's load during it? regards Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT3200 Error with new dvb-s2 drivers - No LNBP21 found!
In previous posts in the list from Manu we founded advice Now is ok. === 1758 if (lnbp21_attach(budget_ci-budget.dvb_frontend, budget_ci-budget.i2c_adap, 0, 0)) { change it to 1758 if (!lnbp21_attach(budget_ci-budget.dvb_frontend, budget_ci-budget.i2c_adap, 0, 0)) { === ACPI: PCI Interrupt :00:1f.5[B] - GSI 17 (level, low) - IRQ 217 PCI: Setting latency timer of device :00:1f.5 to 64 input: PC Speaker as /class/input/input2 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Real Time Clock Driver v1.12ac saa7146: register extension 'budget_ci dvb'. AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 56073 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt :00:1f.3[B] - GSI 17 (level, low) - IRQ 217 ACPI: PCI Interrupt :02:0c.0[A] - GSI 20 (level, low) - IRQ 209 saa7146: found saa7146 @ mem e0806400 (revision 1, irq 209) (0x13c2,0x1019). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget S2-3200 PCI) Intel 810 + AC97 Audio, version 1.01, 23:26:00 May 9 2007 adapter has MAC addr = 00:d0:5c:0b:ab:0e input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3 stb0899_write_regs [0xf1b6]: 02 stb0899_write_regs [0xf1c2]: 00 stb0899_write_regs [0xf1c3]: 00 _stb0899_read_reg: Reg=[0xf000], data=83 stb0899_get_dev_id: ID reg=[0x83] stb0899_get_dev_id: Device ID=[8], Release=[3] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x0400], Offset=[0xf334], Data=[0x464f4633] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x0400], Offset=[0xf33c], Data=[0x02020203] stb0899_get_dev_id: Demodulator Core ID=[FOF3], Version=[33686019] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x0800], Offset=[0xfa2c], Data=[0x46474333] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x0800], Offset=[0xfa34], Data=[0x02020203] stb0899_get_dev_id: FEC Core ID=[FGC3], Version=[33686019] stb0899_attach: Attaching STB0899 stb6100_attach: Attaching STB6100 DVB: registering frontend 0 (STB0899 Multistandard)... ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] HVR4000 - several questions
Hi on http://www.tbc.ru/index.php?option=com_contenttask=viewid=36Itemid=31 I read about supported FEC Rates 1/2, 2/3, 3/4, 5/6, 7/8 - and what about fec = 9/10 - is it supported ? on http://www.hauppauge.co.uk/pages/products/data_hvr4000.html I read about DiSEqC 1.0 supported , and what about other version - 1.1, 1.2 ? is it possible to connect to card the motor for dish, diseqc-commutator and 2 LNB - for C and Ku bands in the same time ? which max current can be between this card and motor or LNB ? 400 ma ? why need automatic DVBS2 pilot support ? what's mean pilot function ? is it possible to capture on harddisc the analog video-signal, connected to s-video or composite video input in HVR4000 ? is it possible to capture and to record on hdd the analog terrestrial broadcasting ? regards Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] KNC1 DVB-S2 Plus, Satelco DVB-S2, TT S2 3200, Technisat DVB-S2
Hello, Manu thanks for your efforts. Is there the diseqc protocol's support in your driver. I mean the 1, 1.1, 1.2 version. Igor ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb