I enabled debug mode in the stv0299 module and get the following:
Feb 23 12:52:02 corbin2 kernel: stv0299: stv0299: init chip Feb 23 12:52:02 corbin2 kernel: stv0299: stv0299_wait_diseqc_idle Feb 23 12:52:02 corbin2 kernel: stv0299: stv0299_send_diseqc_msg Feb 23 12:52:02 corbin2 kernel: stv0299: stv0299_wait_diseqc_idle Feb 23 12:52:02 corbin2 kernel: stv0299: stv0299_readreg: readreg error (reg == 0x0a, ret == -1) Feb 23 12:52:03 corbin2 last message repeated 2 times Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_wait_diseqc_idle: timeout!! Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_set_frontend : FE_SET_FRONTEND Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_readreg: readreg error (reg == 0x0c, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x0c, val == 0x01, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x05, val == 0xb5, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x05, val == 0x35, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_set_FEC Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x31, val == 0x10, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x13, val == 0xb6, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x14, val == 0x53, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x1f, val == 0x3a, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x20, val == 0x2e, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x21, val == 0x90, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x22, val == 0x00, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_writeregI: writereg error (reg == 0x23, val == 0x00, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_readreg: readreg error (reg == 0x18, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_readreg: readreg error (reg == 0x1b, ret == -1) Feb 23 12:52:03 corbin2 kernel: stv0299: stv0299_read_status : FE_READ_STATUS : VSTATUS: 0x00 This is 2.6.18 kernel running linux-dvb from 01/16/07. - Mark. On 2/23/07, Mark Buechler <[EMAIL PROTECTED]> wrote:
I recently put together a system which consists entirely of 3.3-volt PCI 2.3 slots. All modules load successfully and recognize my Nexus. I can do an femon without issue. However, when tuning the card I get an oops. Can anyone point me in the right direction? The Nexus is keyed for 3.3-voltPCI, is it not compatible? Am I barking up the wrong tree here? BUG: unable to handle kernel NULL pointer dereference at virtual address 00000001 printing eip: 00000001 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: ir_common compat_ioctl32 btcx_risc binfmt_misc nfs nfsd exportfs lockd nfs_acl sunrpc ppdev parport_pc lp parport ipv6 sg aic7xxx scsi_transport_spi pcnet32 af_packet lnbp21 stv0299 ivtv wm8775 cx25840 saa7115 msp3400 dvb_usb_gp8psk dvb_usb tuner joydev dvb_pll dvb_ttpci dvb_core psmouse mousedev serio_raw saa7146_vv tsdev evdev i2c_algo_bit video_buf saa7146 cx2341x ttpci_eeprom tveeprom videodev v4l2_common v4l1_compat 8250_pnp ibmphp floppy pcspkr rtc e100 mii ibmasm dm_round_robin dm_multipath ext3 jbd mbcache dm_mirror dm_snapshot multipath raid10 raid1 raid0 linear md_mod sd_mod ide_cd cdrom generic qla2xxx firmware_class scsi_transport_fc acenic scsi_mod ehci_hcd shpchp pci_hotplug ohci_hcd serverworks usbcore ide_core i2c_piix4 i2c_core thermal processor fan unix dm_mod CPU: 1 EIP: 0060:[<00000001>] Not tainted VLI EFLAGS: 00010246 (2.6.18-4-686-smp #2) EIP is at 0x1 eax: efe9625c ebx: 80046f45 ecx: 80046f45 edx: ec9c2680 esi: efe9625c edi: 00000004 ebp: ec613ec8 esp: ec613eb0 ds: 007b es: 007b ss: 0068 Process dvbscan_na (pid: 13560, ti=ec612000 task=ecf0a570 task.ti=ec612000 ) Stack: f0dae109 ec613ec8 ec9c2680 efe9625c 00000002 00000000 00000001 00000002 ec613f30 ec613f2c 00000000 00000000 b5d4567f 00000670 c01223fa ec613f10 00d851f0 ec613f10 00000009 dfb40570 dfb40570 b5d4a7ae 00000670 0000487c Call Trace: [<f0dae109>] dvb_usercopy+0xa3/0x117 [dvb_core] [<c01223fa>] getnstimeofday+0x30/0xb9 [<c012e9ed>] lock_hrtimer_base+0x19/0x35 [<c012ea86>] hrtimer_try_to_cancel+0x33/0x48 [<c012eaa9>] hrtimer_cancel+0xe/0x14 [<f0dae1b7>] dvb_generic_ioctl+0x3a/0x44 [dvb_core] [<c016ca34>] do_ioctl+0x64/0x6d [<c016ca8d>] vfs_ioctl+0x50/0x279 [<c0111f9d>] do_page_fault+0xdd/0x571 [<c016cd13>] sys_ioctl+0x5d/0x6e [<c0102bab>] syscall_call+0x7/0xb Code: Bad EIP value. EIP: [<00000001>] 0x1 SS:ESP 0068:ec613eb0 <1>BUG: unable to handle kernel paging request at virtual address 30303030 printing eip: 30303030 *pde = 00000000 Oops: 0000 [#2] SMP Modules linked in: ir_common compat_ioctl32 btcx_risc binfmt_misc nfs nfsd exportfs lockd nfs_acl sunrpc ppdev parport_pc lp parport ipv6 sg aic7xxx scsi_transport_spi pcnet32 af_packet lnbp21 stv0299 ivtv wm8775 cx25840 saa7115 msp3400 dvb_usb_gp8psk dvb_usb tuner joydev dvb_pll dvb_ttpci dvb_core psmouse mousedev serio_raw saa7146_vv tsdev evdev i2c_algo_bit video_buf saa7146 cx2341x ttpci_eeprom tveeprom videodev v4l2_common v4l1_compat 8250_pnp ibmphp floppy pcspkr rtc e100 mii ibmasm dm_round_robin dm_multipath ext3 jbd mbcache dm_mirror dm_snapshot multipath raid10 raid1 raid0 linear md_mod sd_mod ide_cd cdrom generic qla2xxx firmware_class scsi_transport_fc acenic scsi_mod ehci_hcd shpchp pci_hotplug ohci_hcd serverworks usbcore ide_core i2c_piix4 i2c_core thermal processor fan unix dm_mod CPU: 1 EIP: 0060:[<30303030>] Not tainted VLI EFLAGS: 00010246 (2.6.18-4-686-smp #2) EIP is at 0x30303030 eax: effeabe8 ebx: effeabe8 ecx: 30303030 edx: 00000000 esi: ec9c2680 edi: effeaddc ebp: efe9625c esp: ec613d58 ds: 007b es: 007b ss: 0068 Process dvbscan_na (pid: 13560, ti=ec612000 task=ecf0a570 task.ti=ec612000 ) Stack: f0db46c2 00000000 efe96384 00000008 ec9c2680 efe9625c ef824c6c c015ca48 00000000 00000000 dff547c0 ec9c2680 ed005b40 00000000 ed005b40 c015a1d7 00000000 00000001 dfd092c0 00000000 c011bf2f 00000000 00000000 0000000c Call Trace: [<f0db46c2>] dvb_frontend_release+0x41/0x67 [dvb_core] [<c015ca48>] __fput+0x93/0x175 [<c015a1d7>] filp_close+0x3e/0x62 [<c011bf2f>] put_files_struct+0xa8/0xc3 [<c011d01a>] do_exit+0x146/0x8b2 [<c0103677>] apic_timer_interrupt+0x1f/0x24 [<c01040a1>] do_trap+0x0/0xb5 [<c0112139>] do_page_fault+0x279/0x571 [<c0111ec0>] do_page_fault+0x0/0x571 [<c0103729>] error_code+0x39/0x40 [<f0dae109>] dvb_usercopy+0xa3/0x117 [dvb_core] [<c01223fa>] getnstimeofday+0x30/0xb9 [<c012e9ed>] lock_hrtimer_base+0x19/0x35 [<c012ea86>] hrtimer_try_to_cancel+0x33/0x48 [<c012eaa9>] hrtimer_cancel+0xe/0x14 [<f0dae1b7>] dvb_generic_ioctl+0x3a/0x44 [dvb_core] [<c016ca34>] do_ioctl+0x64/0x6d [<c016ca8d>] vfs_ioctl+0x50/0x279 [<c0111f9d>] do_page_fault+0xdd/0x571 [<c016cd13>] sys_ioctl+0x5d/0x6e [<c0102bab>] syscall_call+0x7/0xb Code: Bad EIP value. EIP: [<30303030>] 0x30303030 SS:ESP 0068:ec613d58 <1>Fixing recursive fault but reboot is needed!
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb