Re: [linux-dvb] TwinHan Magicbox VP7041 does not find any channels
Hej Ryan, first let me tell you thank you for your reply! As far as I can bring those things together until now, the blog post does not fit my problem. Stewart wrote about 7045, mine is 7041 Sorry, I'm not a driver-programmer Boris Ryan Stuart wrote: Hi Boris, Have a look at this page - http://www.flamingspork.com/blog/2006/09/05/twinhan-usb-dtv-dongle-not-working/ As you can see some twinhan devices don't work. For what it is worth, i do have plans to fix the driver but i am busy for the next few months so i might not get a chance to look at it for a while. Stewart, who is the person that wrote the above blog post, never finished the driver he was talking about. I have the half finished code if anyone else wants to have a go at finishing off this driver themselves, just let me know and i will post the code. Cheers Ryan Boris Andratzek wrote: Hej all, I'm new to this list and subscribed because I am trying to bring my TwinHan MagicBox VP7041 USB to work and I'm having troubles... But first let me say thank you to everybody spending his ressource to this project!! Here is my case: I try to make kaffeine or xine working with my DVB-T USB device on Debian Etch. Before I switched finally to Linux some days ago, I had a Windows XP running on another partition with the TwinHan-Software running satisfying. OK, there were some drop-outs, but the quality was OK and the channel scanning worked completely. I write this to document the hardware and the field intesity are OK. I installed dvb-utils and kaffeine, downloaded the firmware and copied it to /lib/firmware. The box is recongnized an the drivers are loaded: from syslog: Aug 2 20:17:00 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 7 Aug 2 20:17:00 localhost kernel: usb 1-2: configuration #1 chosen from 1 choiceAug 2 20:17:00 localhost kernel: dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state. Aug 2 20:17:00 localhost kernel: dvb-usb: will use the device's hardware PID filter (table count: 16). Aug 2 20:17:00 localhost kernel: DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device). nl-lt-boris:~# lsusb Bus 002 Device 001: ID : Bus 001 Device 002: ID 1822:3202 Twinhan VisionDTV USB-Ter/HAMA USB DVB-T device warm Bus 001 Device 001: ID : No I try to scan for channels: [EMAIL PROTECTED]:~$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel channels.conf scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 47400 0 2 9 1 1 3 0 initial transponder 58600 0 2 9 1 1 3 0 initial transponder 61800 0 2 9 1 1 3 0 initial transponder 66600 0 2 9 1 1 3 0 initial transponder 68200 0 2 9 1 1 3 0 initial transponder 76200 0 2 9 1 1 3 0 tune to: 47400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: tuning failed!!! [SNIP - last message repeated a lot of times] ERROR: initial tuning failed dumping lists (0 services) Done. Also, dvdsnoop does not give out anything: nl-lt-boris:~# dvbsnoop -s pidscan dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ - Transponder PID-Scan... - So what can I do? I'm thankful for every hint! Boris Hello list! I'm a bit confused about not reading anything concerning my first mail! Is it because the question is too silly or the hardware is too old? Do you want to tell me I should read something I did not care for so far? Can anybody at least give me a ping back so that I know my mails reach the list? OK, they do - I read it on the list myself Thanks, Boris ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb -- Boris Andratzek Gartenstrasse 27 D-24103 Kiel Tel.: (+49) 0431-5199600 Mobil: 0171-6868273 mailto:[EMAIL PROTECTED] PGP-Key-ID: 0x7B7D5FF6 Fingerprint: 168B C0B4 BD8A E088 275E EA26 6EC2 6CA6 7B7D 5FF6 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TwinHan Magicbox VP7041 does not find any channels
Boris Andratzek wrote: Hej all, I'm new to this list and subscribed because I am trying to bring my TwinHan MagicBox VP7041 USB to work and I'm having troubles... But first let me say thank you to everybody spending his ressource to this project!! Here is my case: I try to make kaffeine or xine working with my DVB-T USB device on Debian Etch. Before I switched finally to Linux some days ago, I had a Windows XP running on another partition with the TwinHan-Software running satisfying. OK, there were some drop-outs, but the quality was OK and the channel scanning worked completely. I write this to document the hardware and the field intesity are OK. I installed dvb-utils and kaffeine, downloaded the firmware and copied it to /lib/firmware. The box is recongnized an the drivers are loaded: from syslog: Aug 2 20:17:00 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 7 Aug 2 20:17:00 localhost kernel: usb 1-2: configuration #1 chosen from 1 choiceAug 2 20:17:00 localhost kernel: dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state. Aug 2 20:17:00 localhost kernel: dvb-usb: will use the device's hardware PID filter (table count: 16). Aug 2 20:17:00 localhost kernel: DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device). nl-lt-boris:~# lsusb Bus 002 Device 001: ID : Bus 001 Device 002: ID 1822:3202 Twinhan VisionDTV USB-Ter/HAMA USB DVB-T device warm Bus 001 Device 001: ID : No I try to scan for channels: [EMAIL PROTECTED]:~$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel channels.conf scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 47400 0 2 9 1 1 3 0 initial transponder 58600 0 2 9 1 1 3 0 initial transponder 61800 0 2 9 1 1 3 0 initial transponder 66600 0 2 9 1 1 3 0 initial transponder 68200 0 2 9 1 1 3 0 initial transponder 76200 0 2 9 1 1 3 0 tune to: 47400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: tuning failed!!! [SNIP - last message repeated a lot of times] ERROR: initial tuning failed dumping lists (0 services) Done. Also, dvdsnoop does not give out anything: nl-lt-boris:~# dvbsnoop -s pidscan dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ - Transponder PID-Scan... - So what can I do? I'm thankful for every hint! Boris Hello list! I'm a bit confused about not reading anything concerning my first mail! Is it because the question is too silly or the hardware is too old? Do you want to tell me I should read something I did not care for so far? Can anybody at least give me a ping back so that I know my mails reach the list? OK, they do - I read it on the list myself Thanks, Boris ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TwinHan Magicbox VP7041 does not find any channels
Hi Boris, Have a look at this page - http://www.flamingspork.com/blog/2006/09/05/twinhan-usb-dtv-dongle-not-working/ As you can see some twinhan devices don't work. For what it is worth, i do have plans to fix the driver but i am busy for the next few months so i might not get a chance to look at it for a while. Stewart, who is the person that wrote the above blog post, never finished the driver he was talking about. I have the half finished code if anyone else wants to have a go at finishing off this driver themselves, just let me know and i will post the code. Cheers Ryan Boris Andratzek wrote: Hej all, I'm new to this list and subscribed because I am trying to bring my TwinHan MagicBox VP7041 USB to work and I'm having troubles... But first let me say thank you to everybody spending his ressource to this project!! Here is my case: I try to make kaffeine or xine working with my DVB-T USB device on Debian Etch. Before I switched finally to Linux some days ago, I had a Windows XP running on another partition with the TwinHan-Software running satisfying. OK, there were some drop-outs, but the quality was OK and the channel scanning worked completely. I write this to document the hardware and the field intesity are OK. I installed dvb-utils and kaffeine, downloaded the firmware and copied it to /lib/firmware. The box is recongnized an the drivers are loaded: from syslog: Aug 2 20:17:00 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 7 Aug 2 20:17:00 localhost kernel: usb 1-2: configuration #1 chosen from 1 choiceAug 2 20:17:00 localhost kernel: dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state. Aug 2 20:17:00 localhost kernel: dvb-usb: will use the device's hardware PID filter (table count: 16). Aug 2 20:17:00 localhost kernel: DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device). nl-lt-boris:~# lsusb Bus 002 Device 001: ID : Bus 001 Device 002: ID 1822:3202 Twinhan VisionDTV USB-Ter/HAMA USB DVB-T device warm Bus 001 Device 001: ID : No I try to scan for channels: [EMAIL PROTECTED]:~$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel channels.conf scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 47400 0 2 9 1 1 3 0 initial transponder 58600 0 2 9 1 1 3 0 initial transponder 61800 0 2 9 1 1 3 0 initial transponder 66600 0 2 9 1 1 3 0 initial transponder 68200 0 2 9 1 1 3 0 initial transponder 76200 0 2 9 1 1 3 0 tune to: 47400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: tuning failed!!! [SNIP - last message repeated a lot of times] ERROR: initial tuning failed dumping lists (0 services) Done. Also, dvdsnoop does not give out anything: nl-lt-boris:~# dvbsnoop -s pidscan dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ - Transponder PID-Scan... - So what can I do? I'm thankful for every hint! Boris Hello list! I'm a bit confused about not reading anything concerning my first mail! Is it because the question is too silly or the hardware is too old? Do you want to tell me I should read something I did not care for so far? Can anybody at least give me a ping back so that I know my mails reach the list? OK, they do - I read it on the list myself Thanks, Boris ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] TwinHan Magicbox VP7041 does not find any channels
Hej all, I'm new to this list and subscribed because I am trying to bring my TwinHan MagicBox VP7041 USB to work and I'm having troubles... But first let me say thank you to everybody spending his ressource to this project!! Here is my case: I try to make kaffeine or xine working with my DVB-T USB device on Debian Etch. Before I switched finally to Linux some days ago, I had a Windows XP running on another partition with the TwinHan-Software running satisfying. OK, there were some drop-outs, but the quality was OK and the channel scanning worked completely. I write this to document the hardware and the field intesity are OK. I installed dvb-utils and kaffeine, downloaded the firmware and copied it to /lib/firmware. The box is recongnized an the drivers are loaded: from syslog: Aug 2 20:17:00 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 7 Aug 2 20:17:00 localhost kernel: usb 1-2: configuration #1 chosen from 1 choiceAug 2 20:17:00 localhost kernel: dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state. Aug 2 20:17:00 localhost kernel: dvb-usb: will use the device's hardware PID filter (table count: 16). Aug 2 20:17:00 localhost kernel: DVB: registering new adapter (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device). nl-lt-boris:~# lsusb Bus 002 Device 001: ID : Bus 001 Device 002: ID 1822:3202 Twinhan VisionDTV USB-Ter/HAMA USB DVB-T device warm Bus 001 Device 001: ID : No I try to scan for channels: [EMAIL PROTECTED]:~$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel channels.conf scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Kiel using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 47400 0 2 9 1 1 3 0 initial transponder 58600 0 2 9 1 1 3 0 initial transponder 61800 0 2 9 1 1 3 0 initial transponder 66600 0 2 9 1 1 3 0 initial transponder 68200 0 2 9 1 1 3 0 initial transponder 76200 0 2 9 1 1 3 0 tune to: 47400:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: tuning failed!!! [SNIP - last message repeated a lot of times] ERROR: initial tuning failed dumping lists (0 services) Done. Also, dvdsnoop does not give out anything: nl-lt-boris:~# dvbsnoop -s pidscan dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ - Transponder PID-Scan... - So what can I do? I'm thankful for every hint! Boris ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
