Re: [linux-dvb] Help with DVBT USB Tuner
I found the Datasheet for the Intel CE6230 which is what WaterVision is using for the USB DVBT Card. What does it entail to build a driver in linux? Is there some form of guide for DVBT drivers I could follow to build it? Thanks for your help On 22/01/2008, Albert Comerma <[EMAIL PROTECTED]> wrote: > > If I'm correct I think that this chip is not supported at all for any > current driver development, so, unless you get information from the > manufacturer and you try to build the driver, it will not be supported soon. > > 2008/1/22, Anubis Ra <[EMAIL PROTECTED]>: > > > > I opened it up and managed to removed the resin from the top of the IC. > > The IC is a WJCE6230. > > > > The link to the manufacturer website is > > > > http://www.rfe.com.cn/doce/6230.htm > > > > > > > > > > On 21/01/2008, Albert Comerma <[EMAIL PROTECTED]> wrote: > > > > > > The first you should do; break it, void your warranty and make a nice > > > pic of what's inside. Only knowing the chips it uses it's possible to > > > make a > > > driver. If you are lucky perhaps it has some screws... and in the luckiest > > > case, perhaps the chips are already supported, so the driver could be > > > easy. > > > > > > Albert > > > > > > 2008/1/21, Anubis Ra <[EMAIL PROTECTED]>: > > > > > > > > Hi All, > > > > > > > > I just acquired a new DVBT USB tuner to which I can't find the > > > > correct firmware. > > > > > > > > Installing the Driver on a Windows Machine I could find the > > > > manufacturer WaterVision (http://www.waterv.com) and deduced that > > > > this device is a WV-TRF-B3. > > > > > > > > lsusb reports > > > > > > > > Bus 002 Device 010: ID 8086:9501 Intel Corp. > > > > > > > > but a an dmesg | tail returns > > > > > > > > [113263.765840] usb 2-2: new full speed USB device using uhci_hcd > > > > and address 10 > > > > [113264.006780] usb 2-2: configuration #1 chosen from 1 choice > > > > > > > > I tried searching about this device hours on end but could not find > > > > anything related to this USB DVBT Device. > > > > > > > > Could anyone help me to identify the firmware / modules required to > > > > install this device? > > > > > > > > Thanks > > > > > > > > > > > > > > > > ___ > > > > linux-dvb mailing list > > > > linux-dvb@linuxtv.org > > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > > > > > > ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Help with DVBT USB Tuner
If I'm correct I think that this chip is not supported at all for any current driver development, so, unless you get information from the manufacturer and you try to build the driver, it will not be supported soon. 2008/1/22, Anubis Ra <[EMAIL PROTECTED]>: > > I opened it up and managed to removed the resin from the top of the IC. > The IC is a WJCE6230. > > The link to the manufacturer website is > > http://www.rfe.com.cn/doce/6230.htm > > > > > On 21/01/2008, Albert Comerma <[EMAIL PROTECTED]> wrote: > > > > The first you should do; break it, void your warranty and make a nice > > pic of what's inside. Only knowing the chips it uses it's possible to make a > > driver. If you are lucky perhaps it has some screws... and in the luckiest > > case, perhaps the chips are already supported, so the driver could be easy. > > > > Albert > > > > 2008/1/21, Anubis Ra <[EMAIL PROTECTED]>: > > > > > > Hi All, > > > > > > I just acquired a new DVBT USB tuner to which I can't find the correct > > > firmware. > > > > > > Installing the Driver on a Windows Machine I could find the > > > manufacturer WaterVision (http://www.waterv.com) and deduced that this > > > device is a WV-TRF-B3. > > > > > > lsusb reports > > > > > > Bus 002 Device 010: ID 8086:9501 Intel Corp. > > > > > > but a an dmesg | tail returns > > > > > > [113263.765840] usb 2-2: new full speed USB device using uhci_hcd and > > > address 10 > > > [113264.006780] usb 2-2: configuration #1 chosen from 1 choice > > > > > > I tried searching about this device hours on end but could not find > > > anything related to this USB DVBT Device. > > > > > > Could anyone help me to identify the firmware / modules required to > > > install this device? > > > > > > Thanks > > > > > > > > > > > > ___ > > > linux-dvb mailing list > > > linux-dvb@linuxtv.org > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Help with DVBT USB Tuner
I opened it up and managed to removed the resin from the top of the IC. The IC is a WJCE6230. The link to the manufacturer website is http://www.rfe.com.cn/doce/6230.htm On 21/01/2008, Albert Comerma <[EMAIL PROTECTED]> wrote: > > The first you should do; break it, void your warranty and make a nice pic > of what's inside. Only knowing the chips it uses it's possible to make a > driver. If you are lucky perhaps it has some screws... and in the luckiest > case, perhaps the chips are already supported, so the driver could be easy. > > Albert > > 2008/1/21, Anubis Ra <[EMAIL PROTECTED]>: > > > > Hi All, > > > > I just acquired a new DVBT USB tuner to which I can't find the correct > > firmware. > > > > Installing the Driver on a Windows Machine I could find the manufacturer > > WaterVision (http://www.waterv.com) and deduced that this device is a > > WV-TRF-B3. > > > > lsusb reports > > > > Bus 002 Device 010: ID 8086:9501 Intel Corp. > > > > but a an dmesg | tail returns > > > > [113263.765840] usb 2-2: new full speed USB device using uhci_hcd and > > address 10 > > [113264.006780] usb 2-2: configuration #1 chosen from 1 choice > > > > I tried searching about this device hours on end but could not find > > anything related to this USB DVBT Device. > > > > Could anyone help me to identify the firmware / modules required to > > install this device? > > > > Thanks > > > > > > > > ___ > > linux-dvb mailing list > > linux-dvb@linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Help with DVBT USB Tuner
The first you should do; break it, void your warranty and make a nice pic of what's inside. Only knowing the chips it uses it's possible to make a driver. If you are lucky perhaps it has some screws... and in the luckiest case, perhaps the chips are already supported, so the driver could be easy. Albert 2008/1/21, Anubis Ra <[EMAIL PROTECTED]>: > > Hi All, > > I just acquired a new DVBT USB tuner to which I can't find the correct > firmware. > > Installing the Driver on a Windows Machine I could find the manufacturer > WaterVision (http://www.waterv.com) and deduced that this device is a > WV-TRF-B3. > > lsusb reports > > Bus 002 Device 010: ID 8086:9501 Intel Corp. > > but a an dmesg | tail returns > > [113263.765840] usb 2-2: new full speed USB device using uhci_hcd and > address 10 > [113264.006780] usb 2-2: configuration #1 chosen from 1 choice > > I tried searching about this device hours on end but could not find > anything related to this USB DVBT Device. > > Could anyone help me to identify the firmware / modules required to > install this device? > > Thanks > > > > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb