Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On 05/27, Christoph Hellwig wrote: > On Fri, May 27, 2022 at 06:06:08PM -0700, Jaegeuk Kim wrote: > > I think there's still some benefit to use FUA such as small chunk writes > > for checkpoint. > > Did you measure if there is? Because some SSDs basically implemented > FUA as an implied flush after the write, in which case it would not > really help there either (but also not hurt). > > But as the previous two maintainers already said - this needs quirking > at the driver layer, not in the submitter. Thanks, I indeed measured this using UFS, and it turned out cache_flush is better than FUA all the time like this. Hence, I posted a quirk [1]. Write(us/KB)4 64 256 10242048 FUA 873.792 754.604 995.624 1011.67 1067.99 CACHE_FLUSH 824.703 712.98 800.307 1019.5 1037.37 [1] https://lore.kernel.org/linux-scsi/20220531201053.3300018-1-jaeg...@kernel.org/T/#u ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On Fri, May 27, 2022 at 05:26:32PM -0700, Jaegeuk Kim wrote: > On 05/28, Dave Chinner wrote: > > On Fri, May 27, 2022 at 09:33:55PM +, Eric Biggers wrote: > > > [+Cc linux-block for FUA, and linux-xfs for iomap] > > > > linux-fsdevel should really be used for iomap stuff... > > > > > > > > On Fri, May 27, 2022 at 01:59:55PM -0700, Jaegeuk Kim wrote: > > > > Some UFS storage gives slower performance on FUA than write+cache_flush. > > > > Let's give a way to manage it. > > > > > > > > Signed-off-by: Jaegeuk Kim > > > > > > Should the driver even be saying that it has FUA support in this case? > > > If the > > > driver didn't claim FUA support, that would also solve this problem. > > > > Agreed, this is a hardware problem that need to addressed with a > > driver quirk to stop it advertising FUA support. The high level > > fs/iomap code should always issue FUA writes where possible and > > the lower layers tell the block layer whether to issue the FUA as > > a FUA or write+cache flush pair. > > I was thinking to turn off FUA in driver side quickly tho, one concern > was the bandwidth vs. latency. What if the device can support FUA having > short latency while giving low bandwidth? Seriously, how is a user supposed to know this sort of thing about the hardware they are using? They don't, and to expect them to not only know about the existing of a weird sysfs knob, let alone how it applies to their hardware and their workload is totally unreasonable. If the hardware has non-deterministic FUA write performance, or requires very careful switch over between cache flushes and FUA to get the most out of the hardware, then that's not something we can tune or optimise for - that's just broken hardware and the drive should quirk the brokeness away so nobody has to care about it. Tell the hardware manufacturer to fix their hardware, don't try to hack around it in software and then expect the user to know how to tune for that broken hardware. > In that case, we still have > a room to utilize FUA for small-sized writes such as filesystem metadata > writes, but avoid DIO w/ FUA for sequential write stream. Strawman. We don't use FUA for normal DIO writes - they only get used for O_DSYNC writes, in which case we either use FUA if the device supports it, or we do a normal write followed by a cache flush. If there are metadata updates that the O_DSYNC needs to also flush, we don't use FUA by let the fileystem issue a cache flush in the most optimal possible after the write completes. Either way, using O_DSYNC DIO writes for streaming, sequential data is a really poor choice for an application to make. Normal DIO writes followed by fdatasync() to flush the metadata and caches once will be much faster and far more efficient than a metadata and cache flush after every single data write, FUA or not. -Dave. -- Dave Chinner da...@fromorbit.com ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On Fri, May 27, 2022 at 06:06:08PM -0700, Jaegeuk Kim wrote: > I think there's still some benefit to use FUA such as small chunk writes > for checkpoint. Did you measure if there is? Because some SSDs basically implemented FUA as an implied flush after the write, in which case it would not really help there either (but also not hurt). But as the previous two maintainers already said - this needs quirking at the driver layer, not in the submitter. ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On Fri, May 27, 2022 at 06:06:08PM -0700, Jaegeuk Kim wrote: > On 05/27, Eric Biggers wrote: > > [+Cc linux-block for FUA, and linux-xfs for iomap] > > > > On Fri, May 27, 2022 at 01:59:55PM -0700, Jaegeuk Kim wrote: > > > Some UFS storage gives slower performance on FUA than write+cache_flush. > > > Let's give a way to manage it. > > > > > > Signed-off-by: Jaegeuk Kim > > > > Should the driver even be saying that it has FUA support in this case? If > > the > > driver didn't claim FUA support, that would also solve this problem. > > I think there's still some benefit to use FUA such as small chunk writes > for checkpoint. > > > > > > --- > > > Documentation/ABI/testing/sysfs-fs-f2fs | 7 +++ > > > fs/f2fs/data.c | 2 ++ > > > fs/f2fs/f2fs.h | 1 + > > > fs/f2fs/sysfs.c | 2 ++ > > > 4 files changed, 12 insertions(+) > > > > > > diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs > > > b/Documentation/ABI/testing/sysfs-fs-f2fs > > > index 9b583dd0298b..cd96b09d7182 100644 > > > --- a/Documentation/ABI/testing/sysfs-fs-f2fs > > > +++ b/Documentation/ABI/testing/sysfs-fs-f2fs > > > @@ -434,6 +434,7 @@ Date: April 2020 > > > Contact: "Daeho Jeong" > > > Description: Give a way to change iostat_period time. 3secs by > > > default. > > > The new iostat trace gives stats gap given the period. > > > + > > > What:/sys/fs/f2fs//max_io_bytes > > > Date:December 2020 > > > Contact: "Jaegeuk Kim" > > > @@ -442,6 +443,12 @@ Description: This gives a control to limit the bio > > > size in f2fs. > > > whereas, if it has a certain bytes value, f2fs won't submit a > > > bio larger than that size. > > > > > > +What:/sys/fs/f2fs//no_fua_dio > > > +Date:May 2022 > > > +Contact: "Jaegeuk Kim" > > > +Description: This gives a signal to iomap, which should not use FUA > > > for > > > + direct IOs. Default: 0. > > > > iomap is an implementation detail, so it shouldn't be mentioned in UAPI > > documentation. UAPI documentation should describe user-visible behavior > > only. > > Ok. > > > > > > + > > > What:/sys/fs/f2fs//stat/sb_status > > > Date:December 2020 > > > Contact: "Chao Yu" > > > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c > > > index f5f2b7233982..23486486eab2 100644 > > > --- a/fs/f2fs/data.c > > > +++ b/fs/f2fs/data.c > > > @@ -4153,6 +4153,8 @@ static int f2fs_iomap_begin(struct inode *inode, > > > loff_t offset, loff_t length, > > > if ((inode->i_state & I_DIRTY_DATASYNC) || > > > offset + length > i_size_read(inode)) > > > iomap->flags |= IOMAP_F_DIRTY; > > > + if (F2FS_I_SB(inode)->no_fua_dio) > > > + iomap->flags |= IOMAP_F_DIRTY; > > > > This is overloading the IOMAP_F_DIRTY flag to mean something other than > > dirty. > > Perhaps this flag needs to be renamed, or a new flag should be added? > > I'm not sure it's acceptable to add another flag for f2fs only. I think Al and willy have been throwing around patches to tell iomap_dio_rw or someone that the caller will handle cache flushes and that it shouldn't initiate them on its own; would that help here? --D > > > > > diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h > > > index e10838879538..c2400ea0080b 100644 > > > --- a/fs/f2fs/f2fs.h > > > +++ b/fs/f2fs/f2fs.h > > > @@ -1671,6 +1671,7 @@ struct f2fs_sb_info { > > > int dir_level; /* directory level */ > > > int readdir_ra; /* readahead inode in readdir */ > > > u64 max_io_bytes; /* max io bytes to merge IOs */ > > > + int no_fua_dio; /* avoid FUA in DIO */ > > > > Make this a bool? > > Done. > > > > > > diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c > > > index 4c50aedd5144..24d628ca92cc 100644 > > > --- a/fs/f2fs/sysfs.c > > > +++ b/fs/f2fs/sysfs.c > > > @@ -771,6 +771,7 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, > > > iostat_period_ms, iostat_period_ms); > > > #endif > > > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, readdir_ra, readdir_ra); > > > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, max_io_bytes, max_io_bytes); > > > +F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, no_fua_dio, no_fua_dio); > > > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_pin_file_thresh, > > > gc_pin_file_threshold); > > > F2FS_RW_ATTR(F2FS_SBI, f2fs_super_block, extension_list, extension_list); > > > #ifdef CONFIG_F2FS_FAULT_INJECTION > > > @@ -890,6 +891,7 @@ static struct attribute *f2fs_attrs[] = { > > > #endif > > > ATTR_LIST(readdir_ra), > > > ATTR_LIST(max_io_bytes), > > > + ATTR_LIST(no_fua_dio), > > > > Where is it validated that only valid values (0 or 1) can be written to this > > file? > > Added. > > > > > - Eric ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On 05/27, Eric Biggers wrote: > [+Cc linux-block for FUA, and linux-xfs for iomap] > > On Fri, May 27, 2022 at 01:59:55PM -0700, Jaegeuk Kim wrote: > > Some UFS storage gives slower performance on FUA than write+cache_flush. > > Let's give a way to manage it. > > > > Signed-off-by: Jaegeuk Kim > > Should the driver even be saying that it has FUA support in this case? If the > driver didn't claim FUA support, that would also solve this problem. I think there's still some benefit to use FUA such as small chunk writes for checkpoint. > > > --- > > Documentation/ABI/testing/sysfs-fs-f2fs | 7 +++ > > fs/f2fs/data.c | 2 ++ > > fs/f2fs/f2fs.h | 1 + > > fs/f2fs/sysfs.c | 2 ++ > > 4 files changed, 12 insertions(+) > > > > diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs > > b/Documentation/ABI/testing/sysfs-fs-f2fs > > index 9b583dd0298b..cd96b09d7182 100644 > > --- a/Documentation/ABI/testing/sysfs-fs-f2fs > > +++ b/Documentation/ABI/testing/sysfs-fs-f2fs > > @@ -434,6 +434,7 @@ Date: April 2020 > > Contact: "Daeho Jeong" > > Description: Give a way to change iostat_period time. 3secs by > > default. > > The new iostat trace gives stats gap given the period. > > + > > What: /sys/fs/f2fs//max_io_bytes > > Date: December 2020 > > Contact: "Jaegeuk Kim" > > @@ -442,6 +443,12 @@ Description: This gives a control to limit the bio > > size in f2fs. > > whereas, if it has a certain bytes value, f2fs won't submit a > > bio larger than that size. > > > > +What: /sys/fs/f2fs//no_fua_dio > > +Date: May 2022 > > +Contact: "Jaegeuk Kim" > > +Description: This gives a signal to iomap, which should not use FUA > > for > > + direct IOs. Default: 0. > > iomap is an implementation detail, so it shouldn't be mentioned in UAPI > documentation. UAPI documentation should describe user-visible behavior only. Ok. > > > + > > What: /sys/fs/f2fs//stat/sb_status > > Date: December 2020 > > Contact: "Chao Yu" > > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c > > index f5f2b7233982..23486486eab2 100644 > > --- a/fs/f2fs/data.c > > +++ b/fs/f2fs/data.c > > @@ -4153,6 +4153,8 @@ static int f2fs_iomap_begin(struct inode *inode, > > loff_t offset, loff_t length, > > if ((inode->i_state & I_DIRTY_DATASYNC) || > > offset + length > i_size_read(inode)) > > iomap->flags |= IOMAP_F_DIRTY; > > + if (F2FS_I_SB(inode)->no_fua_dio) > > + iomap->flags |= IOMAP_F_DIRTY; > > This is overloading the IOMAP_F_DIRTY flag to mean something other than dirty. > Perhaps this flag needs to be renamed, or a new flag should be added? I'm not sure it's acceptable to add another flag for f2fs only. > > > diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h > > index e10838879538..c2400ea0080b 100644 > > --- a/fs/f2fs/f2fs.h > > +++ b/fs/f2fs/f2fs.h > > @@ -1671,6 +1671,7 @@ struct f2fs_sb_info { > > int dir_level; /* directory level */ > > int readdir_ra; /* readahead inode in readdir */ > > u64 max_io_bytes; /* max io bytes to merge IOs */ > > + int no_fua_dio; /* avoid FUA in DIO */ > > Make this a bool? Done. > > > diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c > > index 4c50aedd5144..24d628ca92cc 100644 > > --- a/fs/f2fs/sysfs.c > > +++ b/fs/f2fs/sysfs.c > > @@ -771,6 +771,7 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, iostat_period_ms, > > iostat_period_ms); > > #endif > > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, readdir_ra, readdir_ra); > > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, max_io_bytes, max_io_bytes); > > +F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, no_fua_dio, no_fua_dio); > > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_pin_file_thresh, > > gc_pin_file_threshold); > > F2FS_RW_ATTR(F2FS_SBI, f2fs_super_block, extension_list, extension_list); > > #ifdef CONFIG_F2FS_FAULT_INJECTION > > @@ -890,6 +891,7 @@ static struct attribute *f2fs_attrs[] = { > > #endif > > ATTR_LIST(readdir_ra), > > ATTR_LIST(max_io_bytes), > > + ATTR_LIST(no_fua_dio), > > Where is it validated that only valid values (0 or 1) can be written to this > file? Added. > > - Eric ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On 05/28, Dave Chinner wrote: > On Fri, May 27, 2022 at 09:33:55PM +, Eric Biggers wrote: > > [+Cc linux-block for FUA, and linux-xfs for iomap] > > linux-fsdevel should really be used for iomap stuff... > > > > > On Fri, May 27, 2022 at 01:59:55PM -0700, Jaegeuk Kim wrote: > > > Some UFS storage gives slower performance on FUA than write+cache_flush. > > > Let's give a way to manage it. > > > > > > Signed-off-by: Jaegeuk Kim > > > > Should the driver even be saying that it has FUA support in this case? If > > the > > driver didn't claim FUA support, that would also solve this problem. > > Agreed, this is a hardware problem that need to addressed with a > driver quirk to stop it advertising FUA support. The high level > fs/iomap code should always issue FUA writes where possible and > the lower layers tell the block layer whether to issue the FUA as > a FUA or write+cache flush pair. I was thinking to turn off FUA in driver side quickly tho, one concern was the bandwidth vs. latency. What if the device can support FUA having short latency while giving low bandwidth? In that case, we still have a room to utilize FUA for small-sized writes such as filesystem metadata writes, but avoid DIO w/ FUA for sequential write stream. Is this just HW problem? Or, does SW need to use FUA more efficiently? > > And, quite frankly, exposing this sort of "hardware needs help" knob > as a sysfs variable is exactly the sort of thing we should never do. > > Users have no idea how to tune stuff like this correctly (even if > they knew it existed!), yet we know exactly what hardware has this > problem and the kernel already has mechanisms that would allow it to > just Do The Right Thing. IOWs, we can fix this without the user even > having to know that they have garbage hardware that needs special > help > > Cheers, > > Dave. > -- > Dave Chinner > da...@fromorbit.com ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
On Fri, May 27, 2022 at 09:33:55PM +, Eric Biggers wrote: > [+Cc linux-block for FUA, and linux-xfs for iomap] linux-fsdevel should really be used for iomap stuff... > > On Fri, May 27, 2022 at 01:59:55PM -0700, Jaegeuk Kim wrote: > > Some UFS storage gives slower performance on FUA than write+cache_flush. > > Let's give a way to manage it. > > > > Signed-off-by: Jaegeuk Kim > > Should the driver even be saying that it has FUA support in this case? If the > driver didn't claim FUA support, that would also solve this problem. Agreed, this is a hardware problem that need to addressed with a driver quirk to stop it advertising FUA support. The high level fs/iomap code should always issue FUA writes where possible and the lower layers tell the block layer whether to issue the FUA as a FUA or write+cache flush pair. And, quite frankly, exposing this sort of "hardware needs help" knob as a sysfs variable is exactly the sort of thing we should never do. Users have no idea how to tune stuff like this correctly (even if they knew it existed!), yet we know exactly what hardware has this problem and the kernel already has mechanisms that would allow it to just Do The Right Thing. IOWs, we can fix this without the user even having to know that they have garbage hardware that needs special help Cheers, Dave. -- Dave Chinner da...@fromorbit.com ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
[+Cc linux-block for FUA, and linux-xfs for iomap] On Fri, May 27, 2022 at 01:59:55PM -0700, Jaegeuk Kim wrote: > Some UFS storage gives slower performance on FUA than write+cache_flush. > Let's give a way to manage it. > > Signed-off-by: Jaegeuk Kim Should the driver even be saying that it has FUA support in this case? If the driver didn't claim FUA support, that would also solve this problem. > --- > Documentation/ABI/testing/sysfs-fs-f2fs | 7 +++ > fs/f2fs/data.c | 2 ++ > fs/f2fs/f2fs.h | 1 + > fs/f2fs/sysfs.c | 2 ++ > 4 files changed, 12 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs > b/Documentation/ABI/testing/sysfs-fs-f2fs > index 9b583dd0298b..cd96b09d7182 100644 > --- a/Documentation/ABI/testing/sysfs-fs-f2fs > +++ b/Documentation/ABI/testing/sysfs-fs-f2fs > @@ -434,6 +434,7 @@ Date: April 2020 > Contact: "Daeho Jeong" > Description: Give a way to change iostat_period time. 3secs by default. > The new iostat trace gives stats gap given the period. > + > What:/sys/fs/f2fs//max_io_bytes > Date:December 2020 > Contact: "Jaegeuk Kim" > @@ -442,6 +443,12 @@ Description: This gives a control to limit the bio > size in f2fs. > whereas, if it has a certain bytes value, f2fs won't submit a > bio larger than that size. > > +What:/sys/fs/f2fs//no_fua_dio > +Date:May 2022 > +Contact: "Jaegeuk Kim" > +Description: This gives a signal to iomap, which should not use FUA for > + direct IOs. Default: 0. iomap is an implementation detail, so it shouldn't be mentioned in UAPI documentation. UAPI documentation should describe user-visible behavior only. > + > What:/sys/fs/f2fs//stat/sb_status > Date:December 2020 > Contact: "Chao Yu" > diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c > index f5f2b7233982..23486486eab2 100644 > --- a/fs/f2fs/data.c > +++ b/fs/f2fs/data.c > @@ -4153,6 +4153,8 @@ static int f2fs_iomap_begin(struct inode *inode, loff_t > offset, loff_t length, > if ((inode->i_state & I_DIRTY_DATASYNC) || > offset + length > i_size_read(inode)) > iomap->flags |= IOMAP_F_DIRTY; > + if (F2FS_I_SB(inode)->no_fua_dio) > + iomap->flags |= IOMAP_F_DIRTY; This is overloading the IOMAP_F_DIRTY flag to mean something other than dirty. Perhaps this flag needs to be renamed, or a new flag should be added? > diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h > index e10838879538..c2400ea0080b 100644 > --- a/fs/f2fs/f2fs.h > +++ b/fs/f2fs/f2fs.h > @@ -1671,6 +1671,7 @@ struct f2fs_sb_info { > int dir_level; /* directory level */ > int readdir_ra; /* readahead inode in readdir */ > u64 max_io_bytes; /* max io bytes to merge IOs */ > + int no_fua_dio; /* avoid FUA in DIO */ Make this a bool? > diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c > index 4c50aedd5144..24d628ca92cc 100644 > --- a/fs/f2fs/sysfs.c > +++ b/fs/f2fs/sysfs.c > @@ -771,6 +771,7 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, iostat_period_ms, > iostat_period_ms); > #endif > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, readdir_ra, readdir_ra); > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, max_io_bytes, max_io_bytes); > +F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, no_fua_dio, no_fua_dio); > F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_pin_file_thresh, > gc_pin_file_threshold); > F2FS_RW_ATTR(F2FS_SBI, f2fs_super_block, extension_list, extension_list); > #ifdef CONFIG_F2FS_FAULT_INJECTION > @@ -890,6 +891,7 @@ static struct attribute *f2fs_attrs[] = { > #endif > ATTR_LIST(readdir_ra), > ATTR_LIST(max_io_bytes), > + ATTR_LIST(no_fua_dio), Where is it validated that only valid values (0 or 1) can be written to this file? - Eric ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
[f2fs-dev] [PATCH] f2fs: add sysfs entry to avoid FUA
Some UFS storage gives slower performance on FUA than write+cache_flush. Let's give a way to manage it. Signed-off-by: Jaegeuk Kim --- Documentation/ABI/testing/sysfs-fs-f2fs | 7 +++ fs/f2fs/data.c | 2 ++ fs/f2fs/f2fs.h | 1 + fs/f2fs/sysfs.c | 2 ++ 4 files changed, 12 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 9b583dd0298b..cd96b09d7182 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -434,6 +434,7 @@ Date: April 2020 Contact: "Daeho Jeong" Description: Give a way to change iostat_period time. 3secs by default. The new iostat trace gives stats gap given the period. + What: /sys/fs/f2fs//max_io_bytes Date: December 2020 Contact: "Jaegeuk Kim" @@ -442,6 +443,12 @@ Description: This gives a control to limit the bio size in f2fs. whereas, if it has a certain bytes value, f2fs won't submit a bio larger than that size. +What: /sys/fs/f2fs//no_fua_dio +Date: May 2022 +Contact: "Jaegeuk Kim" +Description: This gives a signal to iomap, which should not use FUA for + direct IOs. Default: 0. + What: /sys/fs/f2fs//stat/sb_status Date: December 2020 Contact: "Chao Yu" diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index f5f2b7233982..23486486eab2 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -4153,6 +4153,8 @@ static int f2fs_iomap_begin(struct inode *inode, loff_t offset, loff_t length, if ((inode->i_state & I_DIRTY_DATASYNC) || offset + length > i_size_read(inode)) iomap->flags |= IOMAP_F_DIRTY; + if (F2FS_I_SB(inode)->no_fua_dio) + iomap->flags |= IOMAP_F_DIRTY; return 0; } diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index e10838879538..c2400ea0080b 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -1671,6 +1671,7 @@ struct f2fs_sb_info { int dir_level; /* directory level */ int readdir_ra; /* readahead inode in readdir */ u64 max_io_bytes; /* max io bytes to merge IOs */ + int no_fua_dio; /* avoid FUA in DIO */ block_t user_block_count; /* # of user blocks */ block_t total_valid_block_count;/* # of valid blocks */ diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c index 4c50aedd5144..24d628ca92cc 100644 --- a/fs/f2fs/sysfs.c +++ b/fs/f2fs/sysfs.c @@ -771,6 +771,7 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, iostat_period_ms, iostat_period_ms); #endif F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, readdir_ra, readdir_ra); F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, max_io_bytes, max_io_bytes); +F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, no_fua_dio, no_fua_dio); F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_pin_file_thresh, gc_pin_file_threshold); F2FS_RW_ATTR(F2FS_SBI, f2fs_super_block, extension_list, extension_list); #ifdef CONFIG_F2FS_FAULT_INJECTION @@ -890,6 +891,7 @@ static struct attribute *f2fs_attrs[] = { #endif ATTR_LIST(readdir_ra), ATTR_LIST(max_io_bytes), + ATTR_LIST(no_fua_dio), ATTR_LIST(gc_pin_file_thresh), ATTR_LIST(extension_list), #ifdef CONFIG_F2FS_FAULT_INJECTION -- 2.36.1.124.g0e6072fb45-goog ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel