Re: [Linux-HA] IPv6, service fail on start behaviour
No idea about my questions ? Benjamin Watine a écrit : Hi all I have two questions about Heartbeat v2 configuration : 1. IPv6addr : I've tried to configure virtual IPv6 address for a resource group. Because I didn't find documentation about this script, I did it like IPaddr, but it don't seems to be OK. What are the parameters to use with IPv6addr script ? Is this script fully OK ? 2. On a resource group, when a service shut down (manually or because of fail), heartbeat try to start it again. It's ok, but if the service have, for any reason, stop after one minute, HB will try to start it undefinitely... How can I configure HeartBeat in the way it tries to load a service only 3 times between two reboot, and failover if it can't run durably the service ? I look after DTD, but didn't find anything about this. I hope you understand what I mean :) Thanks ! Ben ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: Hi all I have two questions about Heartbeat v2 configuration : 1. IPv6addr : I've tried to configure virtual IPv6 address for a resource group. Because I didn't find documentation about this script, I did it like IPaddr, but it don't seems to be OK. What are the parameters to use with IPv6addr script ? Is this script fully OK ? /path/to/IPv6addr meta-data 2. On a resource group, when a service shut down (manually or because of fail), heartbeat try to start it again. It's ok, but if the service have, for any reason, stop after one minute, HB will try to start it undefinitely... How can I configure HeartBeat in the way it tries to load a service only 3 times between two reboot, and failover if it can't run durably the service ? I look after DTD, but didn't find anything about this. http://www.linux-ha.org/v2/faq/forced_failover I hope you understand what I mean :) Thanks ! Ben ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
Andrew Beekhof a écrit : On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: Hi all I have two questions about Heartbeat v2 configuration : 1. IPv6addr : I've tried to configure virtual IPv6 address for a resource group. Because I didn't find documentation about this script, I did it like IPaddr, but it don't seems to be OK. What are the parameters to use with IPv6addr script ? Is this script fully OK ? /path/to/IPv6addr meta-data # /etc/ha.d/resource.d/IPv6addr meta-data usage: /etc/ha.d/resource.d/IPv6addr (start|stop|status|usage|meta-data) That's why I ask. "/usr/lib/ocf/resource.d/heartbeat/IPv6addr meta-data" works, thank you Should I open a bugzilla ? 2. On a resource group, when a service shut down (manually or because of fail), heartbeat try to start it again. It's ok, but if the service have, for any reason, stop after one minute, HB will try to start it undefinitely... How can I configure HeartBeat in the way it tries to load a service only 3 times between two reboot, and failover if it can't run durably the service ? I look after DTD, but didn't find anything about this. http://www.linux-ha.org/v2/faq/forced_failover Thanks a lot ! I hope you understand what I mean :) Thanks ! Ben ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
On 4/19/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: Andrew Beekhof a écrit : > On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: >> Hi all >> >> I have two questions about Heartbeat v2 configuration : >> >> 1. IPv6addr : I've tried to configure virtual IPv6 address for a >> resource group. Because I didn't find documentation about this script, I >> did it like IPaddr, but it don't seems to be OK. >> What are the parameters to use with IPv6addr script ? Is this script >> fully OK ? > > /path/to/IPv6addr meta-data > # /etc/ha.d/resource.d/IPv6addr meta-data usage: /etc/ha.d/resource.d/IPv6addr (start|stop|status|usage|meta-data) That's why I ask. "/usr/lib/ocf/resource.d/heartbeat/IPv6addr meta-data" works, thank you Should I open a bugzilla ? couldn't hurt to >> >> 2. On a resource group, when a service shut down (manually or because of >> fail), heartbeat try to start it again. It's ok, but if the service >> have, for any reason, stop after one minute, HB will try to start it >> undefinitely... How can I configure HeartBeat in the way it tries to >> load a service only 3 times between two reboot, and failover if it can't >> run durably the service ? I look after DTD, but didn't find anything >> about this. > > http://www.linux-ha.org/v2/faq/forced_failover Thanks a lot ! > >> >> I hope you understand what I mean :) >> >> Thanks ! >> >> Ben >> ___ >> Linux-HA mailing list >> Linux-HA@lists.linux-ha.org >> http://lists.linux-ha.org/mailman/listinfo/linux-ha >> See also: http://linux-ha.org/ReportingProblems >> > ___ > Linux-HA mailing list > Linux-HA@lists.linux-ha.org > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > > ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
On Thu, Apr 19, 2007 at 12:08:48PM +0200, Andrew Beekhof wrote: > On 4/19/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: > >Andrew Beekhof a écrit : > >> On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: > >>> Hi all > >>> > >>> I have two questions about Heartbeat v2 configuration : > >>> > >>> 1. IPv6addr : I've tried to configure virtual IPv6 address for a > >>> resource group. Because I didn't find documentation about this script, I > >>> did it like IPaddr, but it don't seems to be OK. > >>> What are the parameters to use with IPv6addr script ? Is this script > >>> fully OK ? > >> > >> /path/to/IPv6addr meta-data > >> > ># /etc/ha.d/resource.d/IPv6addr meta-data > >usage: /etc/ha.d/resource.d/IPv6addr > >(start|stop|status|usage|meta-data) > > > >That's why I ask. > >"/usr/lib/ocf/resource.d/heartbeat/IPv6addr meta-data" works, thank you > >Should I open a bugzilla ? > > couldn't hurt to None of the heartbeat class agents supports meta-data. Is this usage wrong? > > > > >>> > >>> 2. On a resource group, when a service shut down (manually or because of > >>> fail), heartbeat try to start it again. It's ok, but if the service > >>> have, for any reason, stop after one minute, HB will try to start it > >>> undefinitely... How can I configure HeartBeat in the way it tries to > >>> load a service only 3 times between two reboot, and failover if it can't > >>> run durably the service ? I look after DTD, but didn't find anything > >>> about this. > >> > >> http://www.linux-ha.org/v2/faq/forced_failover > > > >Thanks a lot ! > > > >> > >>> > >>> I hope you understand what I mean :) > >>> > >>> Thanks ! > >>> > >>> Ben > >>> ___ > >>> Linux-HA mailing list > >>> Linux-HA@lists.linux-ha.org > >>> http://lists.linux-ha.org/mailman/listinfo/linux-ha > >>> See also: http://linux-ha.org/ReportingProblems > >>> > >> ___ > >> Linux-HA mailing list > >> Linux-HA@lists.linux-ha.org > >> http://lists.linux-ha.org/mailman/listinfo/linux-ha > >> See also: http://linux-ha.org/ReportingProblems > >> > >> > > > >___ > >Linux-HA mailing list > >Linux-HA@lists.linux-ha.org > >http://lists.linux-ha.org/mailman/listinfo/linux-ha > >See also: http://linux-ha.org/ReportingProblems > > > ___ > Linux-HA mailing list > Linux-HA@lists.linux-ha.org > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems -- Dejan ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
Dejan Muhamedagic a écrit : On Thu, Apr 19, 2007 at 12:08:48PM +0200, Andrew Beekhof wrote: On 4/19/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: Andrew Beekhof a écrit : On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: Hi all I have two questions about Heartbeat v2 configuration : 1. IPv6addr : I've tried to configure virtual IPv6 address for a resource group. Because I didn't find documentation about this script, I did it like IPaddr, but it don't seems to be OK. What are the parameters to use with IPv6addr script ? Is this script fully OK ? /path/to/IPv6addr meta-data # /etc/ha.d/resource.d/IPv6addr meta-data usage: /etc/ha.d/resource.d/IPv6addr (start|stop|status|usage|meta-data) That's why I ask. "/usr/lib/ocf/resource.d/heartbeat/IPv6addr meta-data" works, thank you Should I open a bugzilla ? couldn't hurt to What couldn't hurt ? This behaviour or to open a bugzilla ? :) None of the heartbeat class agents supports meta-data. Is this usage wrong? 2. On a resource group, when a service shut down (manually or because of fail), heartbeat try to start it again. It's ok, but if the service have, for any reason, stop after one minute, HB will try to start it undefinitely... How can I configure HeartBeat in the way it tries to load a service only 3 times between two reboot, and failover if it can't run durably the service ? I look after DTD, but didn't find anything about this. http://www.linux-ha.org/v2/faq/forced_failover Thanks a lot ! I hope you understand what I mean :) Thanks ! Ben ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
On 4/23/07, Dejan Muhamedagic <[EMAIL PROTECTED]> wrote: On Thu, Apr 19, 2007 at 12:08:48PM +0200, Andrew Beekhof wrote: > On 4/19/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: > >Andrew Beekhof a écrit : > >> On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: > >>> Hi all > >>> > >>> I have two questions about Heartbeat v2 configuration : > >>> > >>> 1. IPv6addr : I've tried to configure virtual IPv6 address for a > >>> resource group. Because I didn't find documentation about this script, I > >>> did it like IPaddr, but it don't seems to be OK. > >>> What are the parameters to use with IPv6addr script ? Is this script > >>> fully OK ? > >> > >> /path/to/IPv6addr meta-data > >> > ># /etc/ha.d/resource.d/IPv6addr meta-data > >usage: /etc/ha.d/resource.d/IPv6addr > >(start|stop|status|usage|meta-data) > > > >That's why I ask. > >"/usr/lib/ocf/resource.d/heartbeat/IPv6addr meta-data" works, thank you > >Should I open a bugzilla ? > > couldn't hurt to None of the heartbeat class agents supports meta-data. Is this usage wrong? 99% of them just redirect to the OCF agent... so in theory it should work anyway ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
Re: [Linux-HA] IPv6, service fail on start behaviour
Andrew Beekhof wrote: > On 4/23/07, Dejan Muhamedagic <[EMAIL PROTECTED]> wrote: >> On Thu, Apr 19, 2007 at 12:08:48PM +0200, Andrew Beekhof wrote: >> > On 4/19/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: >> > >Andrew Beekhof a écrit : >> > >> On 4/18/07, Benjamin Watine <[EMAIL PROTECTED]> wrote: >> > >>> Hi all >> > >>> >> > >>> I have two questions about Heartbeat v2 configuration : >> > >>> >> > >>> 1. IPv6addr : I've tried to configure virtual IPv6 address for a >> > >>> resource group. Because I didn't find documentation about this >> script, I >> > >>> did it like IPaddr, but it don't seems to be OK. >> > >>> What are the parameters to use with IPv6addr script ? Is this >> script >> > >>> fully OK ? >> > >> >> > >> /path/to/IPv6addr meta-data >> > >> >> > ># /etc/ha.d/resource.d/IPv6addr meta-data >> > >usage: /etc/ha.d/resource.d/IPv6addr >> > >(start|stop|status|usage|meta-data) >> > > >> > >That's why I ask. >> > >"/usr/lib/ocf/resource.d/heartbeat/IPv6addr meta-data" works, thank >> you >> > >Should I open a bugzilla ? >> > >> > couldn't hurt to >> >> None of the heartbeat class agents supports meta-data. Is this >> usage wrong? > > 99% of them just redirect to the OCF agent... so in theory it should > work anyway But, the GUI, et al know that they don't support meta-data, and the meta-data for them would be very misleading - if you looked at it. -- Alan Robertson <[EMAIL PROTECTED]> "Openness is the foundation and preservative of friendship... Let me claim from you at all times your undisguised opinions." - William Wilberforce ___ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems