Re: [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
On Sat, 2007-08-11 at 23:49 +0400, Sergei Shtylyov wrote: HPT374 BIOS seems to only save f_CNT register value for the function #0 before re-tuning DPLL (that causes the driver to report obviously distorted f_CNT for the function #1) -- fix this by always reading the saved f_CNT register value from the function #0 in the driver's init_chipset() method. I'm assuming you don't need me to test these latest patches, and that you'll explicitly ask if you do? Bob - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
On Mon, 2007-08-06 at 21:18 +0400, Sergei Shtylyov wrote: Hm, well, this is indeed tough case but at least it prodded me to fix some issues. Maybe it's worth for you to file a bug at bugzilla.kernel.org... I've raised bug 8851: http://bugzilla.kernel.org/show_bug.cgi?id=8851 Bob - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
On Sun, 2007-08-05 at 22:45 +0400, Sergei Shtylyov wrote: The DPLL tuning code always set up it for 66 MHz due to wrong UltraDMA mask including mode 5 used to check for the necessity of 66 MHz clocking -- This caused 66 MHz clock to be used for HPT374 chip that does not tolerate it. While fixing this, also remove PLL mode from the TODO list -- I don't think it's still relevant item. Signed-off-by: Sergei Shtylyov [EMAIL PROTECTED] --- This is against the current Linus tree. Bob, please test it and report what you'll find out... para_hpt37x: bus clock 33MHz, using 50MHz DPLL. ACPI: PCI Interrupt :00:0d.0[A] - GSI 16 (level, low) - IRQ 17 scsi2: pata_hpt37x scsi3: pata_hpt37x ata3: PATA max UDMA/100 cmd 0x0001efa0 ctl 0x0001ef9e bmdma 0x0001ec00 irq 17 ata4: PATA max UDMA/100 cmd 0x0001ef90 ctl 0x0001ef9a bmdma 0x0001ec00 irq 17 followed by a hard lock -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
On Mon, 2007-08-06 at 00:06 +0400, Sergei Shtylyov wrote: HPT374 BIOS seems to only save f_CNT register value for the function #0 before re-tuning DPLL causing the driver to report obviously distorted f_CNT for the function #1 -- fix this by always reading the saved f_CNT register value from in the init_chipset() method the function #0 of HPT374 chip. While at it, introduce 'chip_type' for the copy of the 'struct hpt_info' member and replace the structure assignment by memcpy()... HPT374: IDE controller at PCI slot :00:0d.0 ACPI: PCI Interrupt :00:0d.0[A] - GSI 16 (level, low) - IRQ 16 HPT374: chipset revision 7 HPT374: DPLL base: 48 MHz, f_CNT: 142, assuming 33 MHz PCI HPT374: using 50 MHz DPLL clock HPT374: 100% native mode on irq 16 ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio ACPI: PCI Interrupt :00:0d.1[A] - GSI 16 (level, low) - IRQ 16 HPT374: DPLL base: 48 MHz, f_CNT: 142, assuming 33 MHz PCI HPT374: using 50 MHz DPLL clock ide4: BM-DMA at 0xed00-0xed07, BIOS settings: hdi:DMA, hdj:pio ide5: BM-DMA at 0xed08-0xed0f, BIOS settings: hdk:DMA, hdl:pio again, followed by a hard lock -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: hpt374 sata (Highpoint Rocket 1540)
: enabling interface ADDRCONF(NETDEV_UP): eth1: link is not ready ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (4090 buckets, 32720 max) ip6_tables: (C) 2000-2006 Netfilter Core Team skge eth1: Link is up at 100 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth0: no IPv6 routers present NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: hpt374 sata (Highpoint Rocket 1540)
On Wed, 2007-08-01 at 19:58 +0400, Sergei Shtylyov wrote: Bob Ham wrote: I've had a Highpoint Rocket 1540 (not RocketRAID) SATA controller for a while now, using a proprietary binary driver from Highpoint in a linux 2.4 kernel. The chipset is an hpt374. The hpt366 driver freezes on boot, as reported by others. Can we see a bootlog please? ... and the output of 'lspci -v' too. If possible, turn off that driver, then post that output... This is the output of the boot using the pata_hpt37x driver: Hrm... what I asked for was 'lspci -v' output. :-) On Tue, 2007-07-31 at 22:22 +0100, Bob Ham wrote: lspci gives: 00:0d.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at efa0 [size=8] I/O ports at ef9c [size=4] I/O ports at ef90 [size=8] I/O ports at ef98 [size=4] I/O ports at ec00 [size=256] Expansion ROM at fe70 [disabled] [size=128K] Capabilities: [60] Power Management version 2 00:0d.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at eff0 [size=8] I/O ports at efe4 [size=4] I/O ports at efa8 [size=8] I/O ports at efe0 [size=4] I/O ports at ed00 [size=256] Capabilities: [60] Power Management version 2 I'll check out the patch you pointed to. -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: hpt374 sata (Highpoint Rocket 1540)
On Wed, 2007-08-01 at 19:58 +0400, Sergei Shtylyov wrote: hpt37x: DPLL did not stabilize. pata_hpt37x: BIOS has not set timing clocks. hpt37x: DPLL did not stabilize. Yes, this ia a known issue, and the fix for it is in the -mm tree: I applied just that pata_hpt37x.c patch, not the whole -mm tree. It locks the machine hard again. Here is the transcribed output: hpt37x: Bus clock 66 MHz, using DPLL. ACPI: PCI Interrupt :00:0d.0[A] - GSI 16 (level, low) - IRQ 17 scsi2: pata_hpt37x scsi3: pata_hpt37x ata3: PATA max UDMA/100 cmd 0x0001efa0 ctl 0x0001ef9e bmdma 0x0001ec00 irq 17 ata4: PATA max UDMA/100 cmd 0x0001ef90 ctl 0x0001ef9a bmdma 0x0001ec00 irq 17 -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
hpt374 sata (Highpoint Rocket 1540)
Hi there, I've had a Highpoint Rocket 1540 (not RocketRAID) SATA controller for a while now, using a proprietary binary driver from Highpoint in a linux 2.4 kernel. The chipset is an hpt374. The hpt366 driver freezes on boot, as reported by others. There are rumours[0][1] of a SATA driver for the hpt372N/302N chips using libata. In 2.6.22, there are PATA drivers for hpt3xx, but no SATA. [0] http://linuxmafia.com/faq/Hardware/sata.html#highpoint [1] http://lkml.org/lkml/2006/1/3/211 I'm wondering if there are or will be libata drivers, or any drivers for that matter, for hpt374-based SATA cards? Cheers, Bob Ham - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: hpt374 sata (Highpoint Rocket 1540)
On Tue, 2007-07-31 at 13:23 +0100, Alan Cox wrote: I'm wondering if there are or will be libata drivers, or any drivers for that matter, for hpt374-based SATA cards? The HPT374 is a PATA controller. Some people ship products with the HPT37x controllers and PATA/SATA bridges and those should work with the libata drivers. Might I suggest something along the lines of the attached patch in order to avoid future confusion? The information on which cards have which chips comes from the linuxmafia web page. Bob -- Bob Ham [EMAIL PROTECTED] --- Kconfig.old 2007-07-31 14:29:22.0 +0100 +++ Kconfig 2007-07-31 21:05:00.0 +0100 @@ -297,6 +297,11 @@ This option enables support for the majority of the later HPT PATA controllers via the new ATA layer. + Some SATA cards, like the Highpoint Rocket/RocketRAID + 1540/1542/1544/1640 and some versions of the RocketRAID 1520, + use these PATA controllers in conjunction with a SATA/PATA + bridge. This driver should support those cards, too. + If unsure, say N. config PATA_HPT3X2N @@ -304,7 +309,12 @@ depends on PCI EXPERIMENTAL help This option enables support for the N variant HPT PATA - controllers via the new ATA layer + controllers via the new ATA layer. + + Some SATA cards, like the Highpoint Rocket 1520 and some + versions of the RocketRAID 1520, use these PATA controllers + in conjunction with a SATA/PATA bridge. This driver should + support those cards, too. If unsure, say N. signature.asc Description: This is a digitally signed message part
Re: hpt374 sata (Highpoint Rocket 1540)
On Tue, 2007-07-31 at 21:52 +0400, Sergei Shtylyov wrote: Hello, I wrote: I've had a Highpoint Rocket 1540 (not RocketRAID) SATA controller for a while now, using a proprietary binary driver from Highpoint in a linux 2.4 kernel. The chipset is an hpt374. The hpt366 driver freezes on boot, as reported by others. Can we see a bootlog please? ... and the output of 'lspci -v' too. The machine locks hard when the driver is loaded so I can't give a full transcription, but here is the driver's output: HPT374: IDE controller at PCI slot :00:0d.0 ACPI: PCI Interrupt :00:0d.0[A] - GSI 16 (level, low) - IRQ 16 HPT374: chipset revision 7 HPT374: DPLL base: 48 MHz, f_CNT: 141, assuming 33 MHz PCI HPT374: using 50 MHz DPLL clock HPT374: 100% native mode on irq 16 ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA, hdh:pio ACPI: PCI Interrupt :00:0d.1[A] - GSI 16 (level, low) - IRQ 16 HPT374: no clock data saved by BIOS HPT374: DPLL base: 48 MHz, f_CNT: 93, assuming 33 MHz PCI HPT374: using 50 MHz DPLL clock ide4: BM-DMA at 0xed00-0xed07, BIOS settings: hdi:DMA, hdj:pio ide5: BM-DMA at 0xed08-0xed0f, BIOS settings: hdk:DMA, hdl:pio The pata_hpt37x driver is refusing to work as well but it doesn't crash the machine. Here is the relevant error message: hpt37x: DPLL did not stabilize. pata_hpt37x: BIOS has not set timing clocks. hpt37x: DPLL did not stabilize. lspci gives: 00:0d.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at efa0 [size=8] I/O ports at ef9c [size=4] I/O ports at ef90 [size=8] I/O ports at ef98 [size=4] I/O ports at ec00 [size=256] Expansion ROM at fe70 [disabled] [size=128K] Capabilities: [60] Power Management version 2 00:0d.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at eff0 [size=8] I/O ports at efe4 [size=4] I/O ports at efa8 [size=8] I/O ports at efe0 [size=4] I/O ports at ed00 [size=256] Capabilities: [60] Power Management version 2 Bob -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: hpt374 sata (Highpoint Rocket 1540)
On Tue, 2007-07-31 at 23:32 +0200, Bartlomiej Zolnierkiewicz wrote: Hi, The hpt366 driver freezes on boot, as reported by others. Does this patch change anything? Unfortunately not. -- Bob Ham [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
