Re: [PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix

2007-06-01 Thread Jeff Garzik 

Mikael Pettersson wrote:

Jeff Garzik writes:
   +if ((pi-flags  (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) == 
(PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) {
   +is_sataii_tx4 = 1;
   +dev_printk(KERN_INFO, pdev-dev, applying SATAII TX4 port 
numbering workaround\n);
  
 ...though I'm not sure the printk is really wanted.  nonetheless, I 
  applied it.


Thanks.

There's also the older PATA port found\n, which is redundant
since libata will print PATA as it logs the corresponding ata dev.
I can remove both if you like.


Agreed, that would be nice.

Jeff



-
To unsubscribe from this list: send the line unsubscribe linux-ide in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix

2007-05-10 Thread Mikael Pettersson 
Jeff Garzik writes:
   +  if ((pi-flags  (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) == 
   (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) {
   +  is_sataii_tx4 = 1;
   +  dev_printk(KERN_INFO, pdev-dev, applying SATAII TX4 port 
   numbering workaround\n);
  
 ...though I'm not sure the printk is really wanted.  nonetheless, I 
  applied it.

Thanks.

There's also the older PATA port found\n, which is redundant
since libata will print PATA as it logs the corresponding ata dev.
I can remove both if you like.

/Mikael
-
To unsubscribe from this list: send the line unsubscribe linux-ide in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix

2007-05-06 Thread Mikael Pettersson 
There is a known problem with sata_promise on SATAII-150/300 TX4
controller cards: it enumerates drives in an order that differs
from the port numbers printed on the controller cards. However,
Promise's BIOS and Linux driver both get the order right.

I investigated Promise's Linux driver (v1.01.0.23), and found
that it explicitly changes the mapping from logical port number
to ATA engine MMIO address on the SATAII TX4 cards. It does this
on all SATAII TX4 cards, without inspecting revision etc. The
SATAII TX2plus cards continue to use the same mapping that was
used for the first-generation chips.

This patch updates sata_promise to use the new port number to
ATA engine mapping on SATAII TX4 cards, which fixes the drive
enumeration order problem on those cards. Tested on several
1st and 2nd generation TX2plus and TX4 chips.

Signed-off-by: Mikael Pettersson [EMAIL PROTECTED]
---
Changes since previous submission: ported to libata#ALL and the
new init model, updated to apply after the fix for the 2nd error
decode regression.

 drivers/ata/sata_promise.c |   22 ++
 1 files changed, 18 insertions(+), 4 deletions(-)

--- linux-2.6.21-mm1/drivers/ata/sata_promise.c.~1~ 2007-05-06 
20:29:28.0 +0200
+++ linux-2.6.21-mm1/drivers/ata/sata_promise.c 2007-05-06 20:30:39.0 
+0200
@@ -45,7 +45,7 @@
 #include sata_promise.h
 
 #define DRV_NAME   sata_promise
-#define DRV_VERSION2.06
+#define DRV_VERSION2.07
 
 
 enum {
@@ -926,6 +926,7 @@ static int pdc_ata_init_one (struct pci_
struct ata_host *host;
void __iomem *base;
int n_ports, i, rc;
+   int is_sataii_tx4;
 
if (!printed_version++)
dev_printk(KERN_DEBUG, pdev-dev, version  DRV_VERSION \n);
@@ -964,10 +965,23 @@ static int pdc_ata_init_one (struct pci_
}
host-iomap = pcim_iomap_table(pdev);
 
-   for (i = 0; i  host-n_ports; i++)
+   is_sataii_tx4 = 0;
+   if ((pi-flags  (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) == 
(PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) {
+   is_sataii_tx4 = 1;
+   dev_printk(KERN_INFO, pdev-dev, applying SATAII TX4 port 
numbering workaround\n);
+   }
+   for (i = 0; i  host-n_ports; i++) {
+   static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 
0, 2};
+   int ata_nr;
+
+   ata_nr = i;
+   if (is_sataii_tx4)
+   ata_nr = sataii_tx4_port_remap[i];
+
pdc_ata_setup_port(host-ports[i],
-  base + 0x200 + i * 0x80,
-  base + 0x400 + i * 0x100);
+  base + 0x200 + ata_nr * 0x80,
+  base + 0x400 + ata_nr * 0x100);
+   }
 
/* initialize adapter */
pdc_host_init(host);
-
To unsubscribe from this list: send the line unsubscribe linux-ide in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html