Backport short cables support from pata_ali.c and while at it cleanup
existing cable detection code.
This patch should allow UDMA > 2 modes on HP Pavilion N5430 and Fujitsu P2000.
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
drivers/ide/pci/alim15x3.c | 73 ++---
1 file changed, 49 insertions(+), 24 deletions(-)
Index: b/drivers/ide/pci/alim15x3.c
===
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/alim15x3.cVersion 0.212007/02/03
+ * linux/drivers/ide/pci/alim15x3.cVersion 0.25Jun 9 2007
*
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -10,6 +10,7 @@
* Copyright (C) 2002 Alan Cox <[EMAIL PROTECTED]>
* ALi (now ULi M5228) support by Clear Zhang <[EMAIL PROTECTED]>
* Copyright (C) 2007 MontaVista Software, Inc. <[EMAIL PROTECTED]>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
*
* (U)DMA capable version of ali 1533/1543(C), 1535(D)
*
@@ -36,6 +37,7 @@
#include
#include
#include
+#include
#include
@@ -583,6 +585,35 @@ out:
return 0;
}
+/*
+ * Cable special cases
+ */
+
+static struct dmi_system_id cable_dmi_table[] = {
+ {
+ .ident = "HP Pavilion N5430",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"),
+ },
+ },
+ { }
+};
+
+static int ali_cable_override(struct pci_dev *pdev)
+{
+ /* Fujitsu P2000 */
+ if (pdev->subsystem_vendor == 0x10CF &&
+ pdev->subsystem_device == 0x10AF)
+ return 1;
+
+ /* Systems by DMI */
+ if (dmi_check_system(cable_dmi_table))
+ return 1;
+
+ return 0;
+}
+
/**
* ata66_ali15x3 - check for UDMA 66 support
* @hwif: IDE interface
@@ -597,34 +628,28 @@ out:
static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
- unsigned int ata66 = 0;
- u8 cable_80_pin[2] = { 0, 0 };
-
unsigned long flags;
- u8 tmpbyte;
+ u8 cbl = ATA_CBL_PATA40, tmpbyte;
local_irq_save(flags);
if (m5229_revision >= 0xC2) {
/*
-* Ultra66 cable detection (from Host View)
-* m5229, 0x4a, bit0: primary, bit1: secondary 80 pin
-*/
- pci_read_config_byte(dev, 0x4a, &tmpbyte);
- /*
-* 0x4a, bit0 is 0 => primary channel
-* has 80-pin (from host view)
-*/
- if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1;
- /*
-* 0x4a, bit1 is 0 => secondary channel
-* has 80-pin (from host view)
-*/
- if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1;
- /*
-* Allow ata66 if cable of current channel has 80 pins
-*/
- ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0];
+* m5229 80-pin cable detection (from Host View)
+*
+* 0x4a bit0 is 0 => primary channel has 80-pin
+* 0x4a bit1 is 0 => secondary channel has 80-pin
+*
+* Certain laptops use short but suitable cables
+* and don't implement the detect logic.
+*/
+ if (ali_cable_override(dev))
+ cbl = ATA_CBL_PATA40_SHORT;
+ else {
+ pci_read_config_byte(dev, 0x4a, &tmpbyte);
+ if ((tmpbyte & (1 << hwif->channel)) == 0)
+ cbl = ATA_CBL_PATA80;
+ }
} else {
/*
* check m1533, 0x5e, bit 1~4 == 1001 => & 0000 = 00010010
@@ -657,7 +682,7 @@ static u8 __devinit ata66_ali15x3(ide_hw
local_irq_restore(flags);
- return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+ return cbl;
}
/**
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
