Re: [PATCHSET] libata: update timing and fix pata_amd transfer mode selection
Tejun Heo wrote: Hello, This patchset cleans up and improves PATA timing related code and fix pata_amd transfer mode selection on top of the improvements. This patchset contains the following tweleve patches. 0001-ata_generic-unindent-loop-in-generic_set_mode.patch 0002-libata-export-xfermode-PATA-timing-related-functi.patch 0003-libata-clean-up-xfermode-PATA-timing-related-stuf.patch 0004-libata-kill-ata_id_to_dma_mode.patch 0005-libata-xfer_mask-is-unsigned-int-not-unsigned-long.patch 0006-libata-separate-out-ata_acpi_gtm_xfermask-from-pa.patch 0007-libata-fix-ata_acpi_gtm_xfermask.patch 0008-libata-implement-ata_timing_cycle2mode-and-use-it.patch 0009-libata-implement-ata_acpi_init_gtm.patch 0010-libata-reimplement-ata_acpi_cbl_80wire-using-ata_.patch 0011-libata-add-ATA_CBL_PATA_IGN.patch 0012-pata_amd-update-mode-selection-for-NV-PATAs.patch 0001-0005 are clean ups of timing handling code. 0006-0008 unifies timing handling code in libata-acpi.c and pata_acpi.c with the core timing code. 0009 implements initial GTM caching. I thought about moving this to LLDs but it's too much hassle. GTM is host wide and doing it from -error_handler would require cross-port synchronization. Left alternative is adding a separate hook. Simply doing it during ACPI attach is simpler. 0010 reimplements ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask(). This new function takes @gtm argument. Both users (pata_via and pata_amd) are converted to pass initial GTM. 0011 implements ATA_CBL_PATA_IGN which tells libata to ignore cable type and supporess all related handling. 0012 updates mode selection for NV PATA controllers. We just can't tell what cable is attached on the controller either from host or drive side. So, for those controllers, pata_amd just sets cable type to ATA_CBL_PATA_IGN and use -mode_filter to limit transfer mode according to BIOS/ACPI boot configuration. If that fails (not likely), pata_amd simply sets the highest allowed speed and let EH figure out the mess. With recent updates, EH should be able to figure it out pretty soon. overall this seems pretty sane... but I lean towards applying it in 2.6.25 rather than 2.6.24, since we are fairly deep into 2.6.24-rc at this point, with little time to test these and the speed down changes to ensure no last-minute breakage. - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHSET] libata: update timing and fix pata_amd transfer mode selection
Tejun Heo wrote: Hello, This patchset cleans up and improves PATA timing related code and fix pata_amd transfer mode selection on top of the improvements. This patchset contains the following tweleve patches. 0001-ata_generic-unindent-loop-in-generic_set_mode.patch 0002-libata-export-xfermode-PATA-timing-related-functi.patch 0003-libata-clean-up-xfermode-PATA-timing-related-stuf.patch 0004-libata-kill-ata_id_to_dma_mode.patch 0005-libata-xfer_mask-is-unsigned-int-not-unsigned-long.patch 0006-libata-separate-out-ata_acpi_gtm_xfermask-from-pa.patch 0007-libata-fix-ata_acpi_gtm_xfermask.patch 0008-libata-implement-ata_timing_cycle2mode-and-use-it.patch 0009-libata-implement-ata_acpi_init_gtm.patch 0010-libata-reimplement-ata_acpi_cbl_80wire-using-ata_.patch 0011-libata-add-ATA_CBL_PATA_IGN.patch 0012-pata_amd-update-mode-selection-for-NV-PATAs.patch 0001-0005 are clean ups of timing handling code. 0006-0008 unifies timing handling code in libata-acpi.c and pata_acpi.c with the core timing code. 0009 implements initial GTM caching. I thought about moving this to LLDs but it's too much hassle. GTM is host wide and doing it from -error_handler would require cross-port synchronization. Left alternative is adding a separate hook. Simply doing it during ACPI attach is simpler. 0010 reimplements ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask(). This new function takes @gtm argument. Both users (pata_via and pata_amd) are converted to pass initial GTM. 0011 implements ATA_CBL_PATA_IGN which tells libata to ignore cable type and supporess all related handling. 0012 updates mode selection for NV PATA controllers. We just can't tell what cable is attached on the controller either from host or drive side. So, for those controllers, pata_amd just sets cable type to ATA_CBL_PATA_IGN and use -mode_filter to limit transfer mode according to BIOS/ACPI boot configuration. If that fails (not likely), pata_amd simply sets the highest allowed speed and let EH figure out the mess. With recent updates, EH should be able to figure it out pretty soon. This patchset is against #upstream-fixes (6bbfd53d47abd1fb20d7c93a9b19a75970b66f49) + update-speeddown patchset [1] Thanks. -- tejun Ping. -- tejun - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCHSET] libata: update timing and fix pata_amd transfer mode selection
Hello, This patchset cleans up and improves PATA timing related code and fix pata_amd transfer mode selection on top of the improvements. This patchset contains the following tweleve patches. 0001-ata_generic-unindent-loop-in-generic_set_mode.patch 0002-libata-export-xfermode-PATA-timing-related-functi.patch 0003-libata-clean-up-xfermode-PATA-timing-related-stuf.patch 0004-libata-kill-ata_id_to_dma_mode.patch 0005-libata-xfer_mask-is-unsigned-int-not-unsigned-long.patch 0006-libata-separate-out-ata_acpi_gtm_xfermask-from-pa.patch 0007-libata-fix-ata_acpi_gtm_xfermask.patch 0008-libata-implement-ata_timing_cycle2mode-and-use-it.patch 0009-libata-implement-ata_acpi_init_gtm.patch 0010-libata-reimplement-ata_acpi_cbl_80wire-using-ata_.patch 0011-libata-add-ATA_CBL_PATA_IGN.patch 0012-pata_amd-update-mode-selection-for-NV-PATAs.patch 0001-0005 are clean ups of timing handling code. 0006-0008 unifies timing handling code in libata-acpi.c and pata_acpi.c with the core timing code. 0009 implements initial GTM caching. I thought about moving this to LLDs but it's too much hassle. GTM is host wide and doing it from -error_handler would require cross-port synchronization. Left alternative is adding a separate hook. Simply doing it during ACPI attach is simpler. 0010 reimplements ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask(). This new function takes @gtm argument. Both users (pata_via and pata_amd) are converted to pass initial GTM. 0011 implements ATA_CBL_PATA_IGN which tells libata to ignore cable type and supporess all related handling. 0012 updates mode selection for NV PATA controllers. We just can't tell what cable is attached on the controller either from host or drive side. So, for those controllers, pata_amd just sets cable type to ATA_CBL_PATA_IGN and use -mode_filter to limit transfer mode according to BIOS/ACPI boot configuration. If that fails (not likely), pata_amd simply sets the highest allowed speed and let EH figure out the mess. With recent updates, EH should be able to figure it out pretty soon. This patchset is against #upstream-fixes (6bbfd53d47abd1fb20d7c93a9b19a75970b66f49) + update-speeddown patchset [1] Thanks. -- tejun [1] http://thread.gmane.org/gmane.linux.ide/24497 - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
