Re: Maxtor 6L200M0 sata irq timeouts
On 01/10/2007, Michal Suchanek [EMAIL PROTECTED] wrote: Hello (please CC me when replying) I got a replacement drive which is also a 6L200M0 but the fw rev is now BACE1G10. Both the irq errors and the smart checksum errors are gone. I guess these were cause by old and buggy drive firmware in my case. Thanks Michal - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Maxtor 6L200M0 sata irq timeouts
Hello (please CC me when replying) On 27/09/2007, Tejun Heo [EMAIL PROTECTED] wrote: Michal Suchanek wrote: On 11/09/2007, Tejun Heo [EMAIL PROTECTED] wrote: Michal Suchanek wrote: What does 'smartctl -a /dev/sda' say? Attaching output. Hmmm... How often does the condition occur? smartlog records only two occasions. Every few minutes when the system is under load, less often when not. I think the logged drive errors are unrelated, the drive delivers the interrupt, just a bit later than Linux expects. At least that is my impression after looking at the these logs and the logs from the old system (I am not sure I could still find the saved logs but with some combination of irq related kernel options I got spurious interrupt instead of timeout, and the drive got disabled). Can you please test the latest rc kernel and see whether this problem is still there? With 2.6.23-rc8 I can still reproduce the problem. I have moved the system to a pata drive and I am going to try and replace the drive to get rid of both this interrupt stuff and overheating. Thanks Michal - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Maxtor 6L200M0 sata irq timeouts
Michal Suchanek wrote: Hello (please CC me when replying) On 11/09/2007, Tejun Heo [EMAIL PROTECTED] wrote: Michal Suchanek wrote: What does 'smartctl -a /dev/sda' say? Attaching output. Hmmm... How often does the condition occur? smartlog records only two occasions. Every few minutes when the system is under load, less often when not. I think the logged drive errors are unrelated, the drive delivers the interrupt, just a bit later than Linux expects. At least that is my impression after looking at the these logs and the logs from the old system (I am not sure I could still find the saved logs but with some combination of irq related kernel options I got spurious interrupt instead of timeout, and the drive got disabled). Can you please test the latest rc kernel and see whether this problem is still there? Thanks. -- tejun - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Maxtor 6L200M0 sata irq timeouts
Michal Suchanek wrote: Hello (please CC me when replying) On 09/09/2007, Joris [EMAIL PROTECTED] wrote: Hi, Just a note to let you know you're not alone. I have the same problem, and someone else reported something simelar. What sata controller are you using? The via onboard controller on the via chipset board and the Intel ICH7 integrated controller with this board. Looks like it is the drive and the used controller does not make any difference. 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) What does 'smartctl -a /dev/sda' say? -- tejun - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Maxtor 6L200M0 sata irq timeouts
On 10/09/2007, Tejun Heo [EMAIL PROTECTED] wrote: Michal Suchanek wrote: Hello (please CC me when replying) On 09/09/2007, Joris [EMAIL PROTECTED] wrote: Hi, Just a note to let you know you're not alone. I have the same problem, and someone else reported something simelar. What sata controller are you using? The via onboard controller on the via chipset board and the Intel ICH7 integrated controller with this board. Looks like it is the drive and the used controller does not make any difference. 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) What does 'smartctl -a /dev/sda' say? Attaching output. Thanks Michal smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax 10 family (ATA/133 and SATA/150) Device Model: Maxtor 6L200M0 Firmware Version: BANC1E00 User Capacity:203,928,109,056 bytes Device is:In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is:Mon Sep 10 16:03:42 2007 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1562) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities:(0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability:(0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 81) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time0x0027 207 207 063Pre-fail Always - 18457 4 Start_Stop_Count0x0032 253 253 000Old_age Always - 348 5 Reallocated_Sector_Ct 0x0033 253 253 063Pre-fail Always - 2 6 Read_Channel_Margin 0x0001 253 253 100Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000Old_age Always - 0 8 Seek_Time_Performance 0x0027 249 239 187Pre-fail Always - 51048 9 Power_On_Minutes0x0032 249 249 000Old_age Always - 486h+06m 10 Spin_Retry_Count0x002b 253 252 157Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 252 252 000Old_age Always - 771 192 Power-Off_Retract_Count 0x0032 253 253 000Old_age Always - 0 193 Load_Cycle_Count0x0032 253 253 000Old_age Always - 0 194 Temperature_Celsius 0x0032 030 253 000Old_age Always - 28 195 Hardware_ECC_Recovered 0x000a 253 252 000Old_age Always - 3399 196 Reallocated_Event_Count 0x0008 253 253 000Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000Old_age Offline - 0 199 UDMA_CRC_Error_Count0x0008 199 199 000Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000Old_age Always - 0 201 Soft_Read_Error_Rate0x000a 253 252 000Old_age Always - 0 202 TA_Increase_Count 0x000a 253 252 000Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180Pre-fail Always - 0 204 Shock_Count_Write_Opern 0x000a 253 252 000Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000
Re: Maxtor 6L200M0 sata irq timeouts
Michal Suchanek wrote: What does 'smartctl -a /dev/sda' say? Attaching output. Hmmm... How often does the condition occur? smartlog records only two occasions. -- tejun - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Maxtor 6L200M0 sata irq timeouts
Hello (please CC me when replying) I gott this drive connected to the sata controler (it's the only drive, the other two ata buses are pata): Model=Maxtor 6L200M0 , FwRev=BANC1E00 Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7 ata3.00: ATA-7: Maxtor 6L200M0, BANC1E00, max UDMA/133 ata3.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 Note: I beleive here the reports of dmesg and hdparm diverge. iirc udma/133 is udma6. FIrst I got a board with via chipset, and when it died I replaced it with one with intel chipset. The problem was there probably for a long time and went unnoticed until the via board started dying and I looked into the logs. It usually manifested while playing video that required something between 95% and 115% of the available cpu power to decode properly so I assumed it is just mplayer catching up with realtime. I get resets like this from time to time: Sep 8 16:44:08 heretic ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Sep 8 16:44:08 heretic ata3.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 Sep 8 16:44:08 heretic res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 8 16:44:08 heretic ata3: soft resetting port Sep 8 16:44:08 heretic ata3.00: configured for UDMA/133 Sep 8 16:44:08 heretic ata3: EH complete Sep 8 16:44:08 heretic sd 2:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) Sep 8 16:44:08 heretic sd 2:0:0:0: [sda] Write Protect is off Sep 8 16:44:08 heretic sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 8 16:44:08 heretic sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA These are only noticable vhen doing realtime stuff like video playback. When playing with stuff like noapic or pci=routeirq earlier I got crashes instead of ata resets (there is not much you can do with a system where the only drive gets disconnected, even if it does not panic right away). With some combination of these I got a spurious interrupt instead of timeout. Thanks Michal - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Maxtor 6L200M0 sata irq timeouts
Hello (please CC me when replying) On 09/09/2007, Joris [EMAIL PROTECTED] wrote: Hi, Just a note to let you know you're not alone. I have the same problem, and someone else reported something simelar. What sata controller are you using? The via onboard controller on the via chipset board and the Intel ICH7 integrated controller with this board. Looks like it is the drive and the used controller does not make any difference. 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) Thanks Michal - To unsubscribe from this list: send the line unsubscribe linux-ide in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html