Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
Jason Gaston wrote:
Resend trying to remove 8-bit characters in the email.
This patch adds the Intel Tolapai RAID controller DID's for SATA support.
Signed-off-by: Jason Gaston <[EMAIL PROTECTED]>
--- linux-2.6.23-rc4/drivers/ata/ahci.c.orig2007-08-27 18:32:35.0
-0700
+++ linux-2.6.23-rc4/drivers/ata/ahci.c 2007-08-28 16:58:11.0 -0700
@@ -411,6 +411,8 @@
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
Why did you not use board_ahci_pi? Is the AHCI ports-implemented
register unreliable on this platform?
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
This device has both AHCI and RAID modes that use the ahci driver. Only
the RAID mode DID's are being added as the PCI class code support will
cover the AHCI mode. Looking at the Generic, PCI class code support
section, it uses "board_ahci". I assumed that they should be the same
as the generic class code support is working on this platform.
Thanks,
Jason
>-Original Message-
>From: Jeff Garzik [mailto:[EMAIL PROTECTED]
>Sent: Friday, August 31, 2007 12:47 AM
>To: Gaston, Jason D
>Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
>Subject: Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
for
>Intel Tolapai
>
>Jason Gaston wrote:
>> Resend trying to remove 8-bit characters in the email.
>>
>> This patch adds the Intel Tolapai RAID controller DID's for SATA
support.
>>
>> Signed-off-by: Jason Gaston <[EMAIL PROTECTED]>
>>
>> --- linux-2.6.23-rc4/drivers/ata/ahci.c.orig 2007-08-27
>18:32:35.0 -0700
>> +++ linux-2.6.23-rc4/drivers/ata/ahci.c 2007-08-28
16:58:11.0 -
>0700
>> @@ -411,6 +411,8 @@
>> { PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
>> { PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
>> { PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
>> +{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
>> +{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
>
>Why did you not use board_ahci_pi? Is the AHCI ports-implemented
>register unreliable on this platform?
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
>-Original Message-
>From: Gaston, Jason D
>Sent: Friday, August 31, 2007 10:10 AM
>To: 'Jeff Garzik'
>Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
>Subject: RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
for
>Intel Tolapai
>
>This device has both AHCI and RAID modes that use the ahci driver.
Only
>the RAID mode DID's are being added as the PCI class code support will
>cover the AHCI mode. Looking at the Generic, PCI class code support
>section, it uses "board_ahci". I assumed that they should be the same
as
>the generic class code support is working on this platform.
>
>Thanks,
>
>Jason
>
>
>>-Original Message-
>>From: Jeff Garzik [mailto:[EMAIL PROTECTED]
>>Sent: Friday, August 31, 2007 12:47 AM
>>To: Gaston, Jason D
>>Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
>>Subject: Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
for
>>Intel Tolapai
>>
>>Jason Gaston wrote:
>>> Resend trying to remove 8-bit characters in the email.
>>>
>>> This patch adds the Intel Tolapai RAID controller DID's for SATA
>support.
>>>
>>> Signed-off-by: Jason Gaston <[EMAIL PROTECTED]>
>>>
>>> --- linux-2.6.23-rc4/drivers/ata/ahci.c.orig2007-08-27
>>18:32:35.0 -0700
>>> +++ linux-2.6.23-rc4/drivers/ata/ahci.c 2007-08-28
>16:58:11.0 -
>>0700
>>> @@ -411,6 +411,8 @@
>>> { PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
>>> { PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
>>> { PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
>>> + { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
>>> + { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
>>
>>Why did you not use board_ahci_pi? Is the AHCI ports-implemented
>>register unreliable on this platform?
Jeff,
Do I need to change this to board_ahci_pi or is it ok to leave it at
board_ahci, which will be used by the AHCI class code devices?
Thanks,
Jason
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
Gaston, Jason D wrote:
-Original Message-
From: Gaston, Jason D
Sent: Friday, August 31, 2007 10:10 AM
To: 'Jeff Garzik'
Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
Subject: RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
for
Intel Tolapai
This device has both AHCI and RAID modes that use the ahci driver.
Only
the RAID mode DID's are being added as the PCI class code support will
cover the AHCI mode. Looking at the Generic, PCI class code support
section, it uses "board_ahci". I assumed that they should be the same
as
the generic class code support is working on this platform.
Thanks,
Jason
-Original Message-
From: Jeff Garzik [mailto:[EMAIL PROTECTED]
Sent: Friday, August 31, 2007 12:47 AM
To: Gaston, Jason D
Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
Subject: Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
for
Intel Tolapai
Jason Gaston wrote:
Resend trying to remove 8-bit characters in the email.
This patch adds the Intel Tolapai RAID controller DID's for SATA
support.
Signed-off-by: Jason Gaston <[EMAIL PROTECTED]>
--- linux-2.6.23-rc4/drivers/ata/ahci.c.orig2007-08-27
18:32:35.0 -0700
+++ linux-2.6.23-rc4/drivers/ata/ahci.c 2007-08-28
16:58:11.0 -
0700
@@ -411,6 +411,8 @@
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
Why did you not use board_ahci_pi? Is the AHCI ports-implemented
register unreliable on this platform?
Jeff,
Do I need to change this to board_ahci_pi or is it ok to leave it at
board_ahci, which will be used by the AHCI class code devices?
You are the one who needs to answer this question ;-)
Most new Intel AHCI have a sane and reliable Ports-Implemented register
value even across reset, unlike earlier ones or some clones. For those,
we use board_ahci_pi.
If PI is not reliable across reset or if BIOS is absent (yes we care
about that case, when we do our own PCI resume for example), then you
should use board_ahci.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
>-Original Message-
>From: Jeff Garzik [mailto:[EMAIL PROTECTED]
>Sent: Friday, September 07, 2007 3:39 PM
>To: Gaston, Jason D
>Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
>Subject: Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
for
>Intel Tolapai
>
>Gaston, Jason D wrote:
>>> -Original Message-
>>> From: Gaston, Jason D
>>> Sent: Friday, August 31, 2007 10:10 AM
>>> To: 'Jeff Garzik'
>>> Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
>>> Subject: RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch
>> for
>>> Intel Tolapai
>>>
>>> This device has both AHCI and RAID modes that use the ahci driver.
>> Only
>>> the RAID mode DID's are being added as the PCI class code support
will
>>> cover the AHCI mode. Looking at the Generic, PCI class code support
>>> section, it uses "board_ahci". I assumed that they should be the
same
>> as
>>> the generic class code support is working on this platform.
>>>
>>> Thanks,
>>>
>>> Jason
>>>
>>>
>>>> -----Original Message-----
>>>> From: Jeff Garzik [mailto:[EMAIL PROTECTED]
>>>> Sent: Friday, August 31, 2007 12:47 AM
>>>> To: Gaston, Jason D
>>>> Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED]
>>>> Subject: Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA
patch
>> for
>>>> Intel Tolapai
>>>>
>>>> Jason Gaston wrote:
>>>>> Resend trying to remove 8-bit characters in the email.
>>>>>
>>>>> This patch adds the Intel Tolapai RAID controller DID's for SATA
>>> support.
>>>>> Signed-off-by: Jason Gaston <[EMAIL PROTECTED]>
>>>>>
>>>>> --- linux-2.6.23-rc4/drivers/ata/ahci.c.orig 2007-08-27
>>>> 18:32:35.0 -0700
>>>>> +++ linux-2.6.23-rc4/drivers/ata/ahci.c 2007-08-28
>>> 16:58:11.0 -
>>>> 0700
>>>>> @@ -411,6 +411,8 @@
>>>>> { PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
>>>>> { PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
>>>>> { PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
>>>>> + { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
>>>>> + { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
>>>> Why did you not use board_ahci_pi? Is the AHCI ports-implemented
>>>> register unreliable on this platform?
>>
>> Jeff,
>>
>> Do I need to change this to board_ahci_pi or is it ok to leave it at
>> board_ahci, which will be used by the AHCI class code devices?
>
>You are the one who needs to answer this question ;-)
>
>Most new Intel AHCI have a sane and reliable Ports-Implemented register
>value even across reset, unlike earlier ones or some clones. For
those,
>we use board_ahci_pi.
>
>If PI is not reliable across reset or if BIOS is absent (yes we care
>about that case, when we do our own PCI resume for example), then you
>should use board_ahci.
>
> Jeff
At this time, I don't have any way to test those particular DeviceID's
and I know that the AHCI mode DeviceID works by using the class code
support. So, I would like to just leave them at they are, if that is
ok.
Thanks,
Jason
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
Gaston, Jason D wrote: At this time, I don't have any way to test those particular DeviceID's and I know that the AHCI mode DeviceID works by using the class code support. So, I would like to just leave them at they are, if that is ok. Fine by me... Overall I'll follow "vendor's best advice" here :) Jeff - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
Jeff Garzik wrote: > Gaston, Jason D wrote: >> At this time, I don't have any way to test those particular DeviceID's >> and I know that the AHCI mode DeviceID works by using the class code >> support. So, I would like to just leave them at they are, if that is >> ok. > > > Fine by me... Overall I'll follow "vendor's best advice" here :) The distinction between board_ahci and board_ahci_pi has been removed in #upstream anyway, so it doesn't matter too much anyway. Thanks. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
Jason Gaston wrote:
Resend trying to remove 8-bit characters in the email.
This patch adds the Intel Tolapai RAID controller DID's for SATA support.
Signed-off-by: Jason Gaston <[EMAIL PROTECTED]>
--- linux-2.6.23-rc4/drivers/ata/ahci.c.orig2007-08-27 18:32:35.0
-0700
+++ linux-2.6.23-rc4/drivers/ata/ahci.c 2007-08-28 16:58:11.0 -0700
@@ -411,6 +411,8 @@
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
+ { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
+ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
applied manually, since it conflicted with Tejun's PI patch (not your fault)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
