MNI occuring on a regular basis
Hi all, Lately, I installed a SBlive! on my machine at home. Since then, I'm getting on a routine basis the following message at my "xconsole": " Uhhuh. NMI received. Dazed and confused, but trying to continue. You probably have hardware problem with your RAM chips" O.K., i've made a little research before I wrote this one. This is shortly what i've fished: NMI is "Non Maskable Interrupt", which was used on older SIMM chips to report that a parity problem has occurred in those RAM chips. It is also used on some hardware to report something like - going into power saving mode, or similar announcment. This message is generated through the kernel (printk()) These messages appear usually when the system is idle, al least partially idle.(as far as I could check it) . One thing's for sure - when the system is idle, and i wake it up - there's always a queue of messages in my xconsole reported at intervals of 3-4 minutes. Does anyone have an idea of what could it be ? my DIMM (and its DIMM, not SIMM...) ram wasn't changed lately, and my SBlive doesn't have detachable RAM chips on it. Could it be that my SBlive internal RAM chips are defected, or is it reporting those messages with regard to some power saving mode its going into ? Can it be anything else anyway ? TIA, Boaz. below are some quotes of info I got from the web: == NMI is the Non-Maskable Interrupt. Back in the days when most PCs included parity memory this interrupt was used to signal a memory parity fault or other serious problem, but the interrupt service routine would identify the problem. I don't know what it might be used for nowadays or why the reason for it remains unidentified. That depends what the NMI is triggered by. The usual use for that signal was to signal a parity error on with-parity RAM, and if that's what's happening, then there are basically two cures: 1. Configure your system to say that it's using no-parity RAM. 2. Replace the no-parity SIMM(s) with with-parity SIMM(s). On some systems with APM (Advanced Power Management) features, NMI is used to signal that the system is going into or coming out of power saving mode, in which case the above won't help. You'd need to look at the kernel power saving settings or tweak your hardware settings to not use power saving mode in this case... = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Needed: new cellcom SMS script
hi I have trouble updating my perl modules anyone has ALL of them in RPM format ? (I can find each of them somewhere but they do not match ...) thanks erez. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Needed: new cellcom SMS script
Hi Erez, If you have the CPAN module installed, do perl -MCPAN -e shell and then type 'h' and enter. If you have internet connection, this is all you need to update your perl modules and distribution. Read the online help. (thanks to Gaal Yahas) -- mulix linux/reboot.h: #define LINUX_REBOOT_MAGIC1 0xfee1dead On Tue, 23 May 2000 [EMAIL PROTECTED] wrote: hi I have trouble updating my perl modules anyone has ALL of them in RPM format ? (I can find each of them somewhere but they do not match ...) thanks erez. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Needed: new cellcom SMS script
On Tue, May 23, 2000 at 10:34:12AM +0300, [EMAIL PROTECTED] wrote: I have trouble updating my perl modules anyone has ALL of them in RPM format ? (I can find each of them somewhere but they do not match ...) You really want to use Perl's mechanisms for packages more than RPM. What kind of troubles do you get with "perl -MCPAN -e 'install ...'"? -- believing is seeing [EMAIL PROTECTED] http://www.forum2.org/gaal/ = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Twin Head laptop
On Tue, 23 May 2000, Yaniv Kimchi wrote: You know, the intention was that if you managed to use it, you should explain *how*, not just send a useless e-mail telling me you managed to work with it. --Ariel Yes I have, RH 6.1 and up runwithout problems on this machine. Yaniv Kimchi [EMAIL PROTECTED] On Mon, 22 May 2000, Ariel Biener wrote: Hi, Has anyone managed to properly run X on a twinhead slimnote vx3 ? (1024x768 TFT display, Trident Cyber 9525 card, 2.5MB). --Ariel -- Ariel Biener e-mail: [EMAIL PROTECTED] Work phone: 03-6406086 fingerprint = 07 D1 E5 3E EF 6D E5 82 0B E9 21 D4 3C 7D 8B BC = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] -- Ariel Biener e-mail: [EMAIL PROTECTED] Work phone: 03-6406086 fingerprint = 07 D1 E5 3E EF 6D E5 82 0B E9 21 D4 3C 7D 8B BC = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Needed: new cellcom SMS script
LG 800 doesn't have IR. Blessed be, GW. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Q: How to know which process manipulates semaphore ?
Hello gurus ! I am looking for some semapore monitoring tool. I know ipcs command, but it doesn`t help me to find out process - semapore asociation. I understand that kernel debugging can help in this issue, but may be some tool exist ? And the same question concerning threads - does anybody knows thread monitoring tool -like top ? Regards, Lev = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Modem para linux
From: abraham [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject:Modem para linux Send reply to: [EMAIL PROTECTED] Date sent: Mon, 22 May 2000 18:36:15 +2 Hello every body I am look for a new modem for me suse 6.2 . Can you recommend one ? What you think about Dynamode and USR Robotics (both external and 56.6Kbaud) . Thank in advance. Abraham Kusinsky [EMAIL PROTECTED] [EMAIL PROTECTED] ICQ N# 28426933 = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Modem para linux
On Tue, 23 May 2000, abraham wrote: I am look for a new modem for me suse 6.2 . Can you recommend one ? What you think about Dynamode and USR Robotics (both external and 56.6Kbaud) . anything but a winmodem. USR are great. consider ISDN. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
at and apmd.
Hi guys. I got a little problem with the AT command. When I schedule a command for the next few minutes it works great, but when I schedule it for an hour later it doesn't work. My guess is that it's because of the APM Daemon. I think that after the apmd turns of my screen the commands won't run. Any way to get around it? -- Idan. ** I haven't lost my mind.. ** It is backed up on a tape somewhere. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Needed: new cellcom SMS script
On Mon, May 22, 2000 at 07:35:59AM +0300, I hastily wrote: To all of you who aren't sure they have the required modules installed, doing: perl -MCPAN -e 'install qw(Digest-MD5 MIME-Base64 libnet HTML-Parser URI libwww-perl)' should help :-) Looks like one of them weeks, can't get one thing right the first shot :-/ As a good fellow noted, the above will not work. You should use this: perl -MCPAN -e 'install qw(Digest::MD5 MIME::Base64 Bundle::libnet HTML::Parser URI Bundle::LWP)' instead. -- believing is seeing [EMAIL PROTECTED] http://www.forum2.org/gaal/ = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Modem para linux
If you cannot go ISDN (like me), Dynamode is fine. I'm using their 56K ISA model with SuSE 6.3 and wvdial. It works fine. Ira Abramov wrote: On Tue, 23 May 2000, abraham wrote: I am look for a new modem for me suse 6.2 . Can you recommend one ? What you think about Dynamode and USR Robotics (both external and 56.6Kbaud) . anything but a winmodem. USR are great. consider ISDN. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] begin:vcard n:Feiglin;Daniel tel;cell:972 53 869986 tel;fax:972 9 862 1052 tel;home:972 9 832 0939 tel;work:972 9 861 6204 x-mozilla-html:FALSE org:Dilog Computers Ltd. adr:;;POB 36;Shavei Shomron, Mobile Post;;44858;ISRAEL version:2.1 email;internet:[EMAIL PROTECTED] title:CC BW note:cc: to [EMAIL PROTECTED] x-mozilla-cpt:;-7424 fn:Daniel Feiglin end:vcard
