Re: multilink

[Oded Arbel]

On Sun, 29 Apr 2001, mike ray wrote:

> does any one know if any 2.2.x kernel supports natively multilink in its ppp
> ??

Had no problem with MPPP using the patched ipppd I got with my Mandrake
7.1 or 7.2 when doing ISDN connections at up to 4 channels. the 2.4.3
kernel seems to be more stable about it, but it probably a driver issue
and not anything that has to do with pppd.

Oded


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: PAM and samba

[Oded Arbel]

On Sun, 29 Apr 2001, Ely Levy wrote:

> did someone succed to make samba to work with PAM on redhat?
> I need to know with both 2.0.7 and 2.2.0..

I'm not sure what you mean by that, but at work we have several Linux
computers, running Samba versions 2.07 through 2.2 and all the computers
(including their samba services) are doing authentication through
pam ,using pam_smb to query the Win2k PDC server.

And it works pretty much ok.

Oded


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

lilo instellation problem

[Micha Feigin]

Hello

I tried to install lilo on a new red hat 7 instalation.
I tried to istall it on a 15 meg hda2 /boot, located after a 16 gig
windows
partition (which I can't move/remove etc.).
I got an error (which coresponded to a comment during the installation
formating stage) which said that lilo couldn't install,
niether on hda2 nor on hda which reads as follows:

Warning:  device 0x0302 exceeds 1024 cylinders limit. Fatal:
geo_comp_addr!
cylinder number is too big (2040 > 1023).

I can reinstall/format the linux partition. I couldn't get linux to load
off
of  hda2 which contains the boot partition without lilo either (the
computer
just froze on startup).

The installation did boot ok from the boot disk.

Is there any way to solve this in order to use lilo instead of using
loadlin
instead?

Thank you.

Micha Feigin
[EMAIL PROTECTED]



=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew (fwd)

[Oren Held]

Hi

Please ignore this message, I've found the 'bidi abitext'.

thanks.

Cya,
Oren.

-- Forwarded message --
Date: Sun, 29 Apr 2001 23:08:55 +0300 (IDT)
From: Oren Held <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: AbiWord - hebrew

Hello

> One small question: did had you installed the bidi built or the normal? I
> got the bidi for windows (from a week or so) and I can tell you it is not
> looking good yet...

Is there a bidi version for LINUX ? I've got the normal version.

Cya,
Oren.


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: RAID 5 with 3Ware IDE

[Ely Levy]

On Sun, 29 Apr 2001, Ariel Biener wrote:

|  On Sun, 29 Apr 2001, Hetz Ben Hamo wrote:
|  
|  > Linux kernel NFS V3? is it stable? faster then NFS V2?
|  
|  In general, I believe so, I can ask Alan.

It's more then that its a complitly diffrent protocol diffrent
authetication and so on..
A lot of filers implemant v2 only or oly parts of v3

there are also issues with v3 and linux which we encounter from time to
time especially with net up

Ely


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Mandrake 8 problems

[Gal Goldschmidt]

Hi,

I upgraded from 7.2 using a clean install ( I formated everything but
/home )
I have 3dfx3000 & BP6 ( Dual Celeron).

The problem is palying MPEG1, The only way I can play those is in double
mode with
xmms,gtv xmovie just crash.
When I tried full screen or changing of the resulotion (Ctral+Alt +/-) X
crashes.
I disabled glx and now full screen works, but no normal size windows and
no GL.

avifile does not want to compile, I will look for a new version but it
compiled great on 7.2.

Before the Upgrade I hade the same kernel, the same X ( I upgraded to
KDE2.1.1)
I decided to move to a clean upgrade (8.0) and ended up with a broken
machine.

BTW KDE 2.1.1 does not like ISO-8859-8 as the default font ( in the
interlazaion menu),
It will not recover before you fix the .kde files. 



=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Changing biditext (Xlib wizards, anyone?)

[Ilya Konstantinov]

Hi,

Anyone knows if it's possible to improve biditext so that it'll analyze
the character set of the font in the GC (and thus used in XDrawString)?

Looking around the Xlib API, it looks like the only way to do it is to
cache a font list and match font IDs. Is there a way to retrieve the
name (and thus, the XLFD) from the GC?

-- 
Best regards,
Ilya Konstantinov

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[Oren Held]

Hello

> One small question: did had you installed the bidi built or the normal? I
> got the bidi for windows (from a week or so) and I can tell you it is not
> looking good yet...

Is there a bidi version for LINUX ? I've got the normal version.

Cya,
Oren.


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Ariel Biener]

On Sun, 29 Apr 2001, Nadav Har'El wrote:

> By definition, any NTP client/server connecting to a stratum 1 server becomes
> a stratum 2 server, so saying it should only be used by stratum 2 servers
> doesn't say much...

I know what I meant, and so do the others here, but thanks for taking the
time for writing this interpretation for the sake of those who didn't
understand,

--Ariel
> 
> I think what you meant to emphasize was that a stratum 1 server should be
> used only by an NTP *server* which belongs to a non-trivial organization
> and which will be in-turn used by a non-trivial number of people. For example,
> ntp.netvision.net.il (stratum 2) uses ntp.ilan.net.il (stratum 1).
> ntp.technion.ac.il (stratum 3) uses relay.huji.ac.il (stratum 2) which uses
> ntp.ilan.net.il (stratum 1). You get the idea.
> 
> --
> Nadav Har'El  |Sunday, Apr 29 2001, 7 Iyyar 5761
> [EMAIL PROTECTED]   |-
> Phone: +972-53-245868, ICQ 13349191 |A professor is one who talks in someone
> http://nadav.harel.org.il |else's sleep.
> 

--
Ariel Biener
e-mail: [EMAIL PROTECTED]
PGP(6.5.8) public key http://www.tau.ac.il/~ariel/pgp.html


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Nadav Har'El]

On Sun, Apr 29, 2001, Ariel Biener wrote about "Re: Public NTP servers in Israel":
> On Sun, 29 Apr 2001, Stanislav Malyshev a.k.a Frodo wrote:
> 
> > There's ntp.ac.il, and there are ntp.tau.ac.il, ntp.technion.ac.il
> > and I guess more, most of them uses ntp.ac.il. I'm not sure about others,
> > but ntp.ac.il is public.
> 
> ntp.ac.il == ntp.ilan.net.il. It's public, but should only be used by
> stratum 2 ntp servers. Stratum 0/1 servers are not to be used by end
> clients, see netiquette about it. It also is a scalability problem.

By definition, any NTP client/server connecting to a stratum 1 server becomes
a stratum 2 server, so saying it should only be used by stratum 2 servers
doesn't say much...

I think what you meant to emphasize was that a stratum 1 server should be
used only by an NTP *server* which belongs to a non-trivial organization
and which will be in-turn used by a non-trivial number of people. For example,
ntp.netvision.net.il (stratum 2) uses ntp.ilan.net.il (stratum 1).
ntp.technion.ac.il (stratum 3) uses relay.huji.ac.il (stratum 2) which uses
ntp.ilan.net.il (stratum 1). You get the idea.

-- 
Nadav Har'El|Sunday, Apr 29 2001, 7 Iyyar 5761
[EMAIL PROTECTED] |-
Phone: +972-53-245868, ICQ 13349191 |A professor is one who talks in someone
http://nadav.harel.org.il   |else's sleep.

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[dgi_il]

One small question: did had you installed the bidi built or the normal? I
got the bidi for windows (from a week or so) and I can tell you it is not
looking good yet...

- Original Message -
From: Oren Held <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, April 28, 2001 9:18 PM
Subject: AbiWord - hebrew


> Hello People
>
> I've just installed AbiWord for Linux. I cannot make it use a hebrew font.
> Anybody suceeded ?
>
> Thanks,
> Oren.
>
>
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: RAID 5 with 3Ware IDE

[Ariel Biener]

On Sun, 29 Apr 2001, Hetz Ben Hamo wrote:

> Linux kernel NFS V3? is it stable? faster then NFS V2?

In general, I believe so, I can ask Alan.

> I didn't understand how you tie the ethernet switch with the block size. it's
> a 100 MBit switch and all the machines are equipped with Intel 100 MBit
> cards..

I'll send you the appropriate link from the NetApp site.

> If it's hard disk got it's own controller (processor on the card) and DMA
> channel (I'm not talking about those cheap RAID solutions like HPT's one or
> Promise 2 hard drives solution), why would I have those problems?

Because the access time of a 60GB disk with 7200 revolutions per minute is
more or less a joke for high performance IO.

--Ariel
> 
> >
> > --Ariel
> 
> Thanks,
> Hetz
> 

--
Ariel Biener
e-mail: [EMAIL PROTECTED]
PGP(6.5.8) public key http://www.tau.ac.il/~ariel/pgp.html


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: RAID 5 with 3Ware IDE

[Hetz Ben Hamo]

Hi Ariel,

I'm not sure I'm understanding you.

Just for clarification: 3Ware hardware RAID card is a card that is using EIDE 
hard drives instead of SCSI, with each IDE got it's own processor (on the 
card), DMA channels and in some models - caching. Thats what I'm talking 
about.

>Is performance an issue ?  Use NFSv3, and mount with a blocksize of
> 16k (unless your switches deal with larger blocksizes well - Network
> Appliance have a fairly well documented case of switches not dealing well
> with >16k udp blocksize for NFS).

Linux kernel NFS V3? is it stable? faster then NFS V2?

I didn't understand how you tie the ethernet switch with the block size. it's 
a 100 MBit switch and all the machines are equipped with Intel 100 MBit 
cards..

>
>About performance, 60GB disks with 7200rpm, using raid5, will result in
> performance problems. If you are going to mount this using 100Mbit over a
> few NFS clients, that use the file-server you create intensively for reads
> and writes, you may find yourself bottlenecked...

If it's hard disk got it's own controller (processor on the card) and DMA 
channel (I'm not talking about those cheap RAID solutions like HPT's one or 
Promise 2 hard drives solution), why would I have those problems?

>
> --Ariel

Thanks,
Hetz

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Ariel Biener]

On Sun, 29 Apr 2001, Stanislav Malyshev a.k.a Frodo wrote:

> There's ntp.ac.il, and there are ntp.tau.ac.il, ntp.technion.ac.il
> and I guess more, most of them uses ntp.ac.il. I'm not sure about others,
> but ntp.ac.il is public.

ntp.ac.il == ntp.ilan.net.il. It's public, but should only be used by
stratum 2 ntp servers. Stratum 0/1 servers are not to be used by end
clients, see netiquette about it. It also is a scalability problem.


--Ariel

> 
> --
> [EMAIL PROTECTED]\/There shall be counsels taken
> Stanislav Malyshev/\Stronger than Morgul-spells
> phone +972-3-9316425  /\  JRRT LotR.
> http://sharat.co.il/frodo/whois:!SM8333
> 
> 
> =
> Tounsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 

--
Ariel Biener
e-mail: [EMAIL PROTECTED]
PGP(6.5.8) public key http://www.tau.ac.il/~ariel/pgp.html


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Stanislav Malyshev a.k.a Frodo]

AB>> timeserver.iix.net.il  | ntp.iix.net.il| stratum 2 | public
AB>> ntp.ilan.net.il| ntp.ac.il | stratum 0/1   | only stratum 2
AB>>   servers

Seems that ntp.ac.il still allows connection to everybody. But then it's
better to use timeserver.iix.net.il.

-- 
[EMAIL PROTECTED]  \/  There shall be counsels taken
Stanislav Malyshev  /\  Stronger than Morgul-spells
phone +972-3-9316425/\  JRRT LotR.
http://sharat.co.il/frodo/  whois:!SM8333


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Stanislav Malyshev a.k.a Frodo]

OG>> Can anyone point me to a list of public NTP servers in Israel. A

There's ntp.ac.il, and there are ntp.tau.ac.il, ntp.technion.ac.il
and I guess more, most of them uses ntp.ac.il. I'm not sure about others,
but ntp.ac.il is public.

-- 
[EMAIL PROTECTED]  \/  There shall be counsels taken
Stanislav Malyshev  /\  Stronger than Morgul-spells
phone +972-3-9316425/\  JRRT LotR.
http://sharat.co.il/frodo/  whois:!SM8333


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: RAID 5 with 3Ware IDE

[Ariel Biener]

On Sun, 29 Apr 2001, Hetz Ben Hamo wrote:

  Hi Hetz,



   Is performance an issue ?  Use NFSv3, and mount with a blocksize of
16k (unless your switches deal with larger blocksizes well - Network
Appliance have a fairly well documented case of switches not dealing well
with >16k udp blocksize for NFS).

   About performance, 60GB disks with 7200rpm, using raid5, will result in
performance problems. If you are going to mount this using 100Mbit over a
few NFS clients, that use the file-server you create intensively for reads
and writes, you may find yourself bottlenecked...

--Ariel

> Hi all,
> 
> I'm planning to make up a file server for a project that I'm working on in my
> spare time. I'm planning to make it a 300GB File server (EIDE UDMA 5- 5 X 
> 60 GB hard disk) - with 3Ware controller..
> 
> I got few questions:
> 
> 1. Anyone triedto use this controller? any impressions? recommendations?
> 
> 2. How are the drivers inside the kernel? in 2.2.x? 2.4.x?
> 
> I'm planning to use NFS with it, but so far from my knowledge, Linux NFS V2
> implementation are not good, and V3 is still experimental and unstable (if I
> understand that correctly). Any suggestions? lots of users will have to
> access this machine locally...
> 
> Any other suggestions regarding this RAID?
> 
> Thanks,
> Hetz
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 

--
Ariel Biener
e-mail: [EMAIL PROTECTED]
PGP(6.5.8) public key http://www.tau.ac.il/~ariel/pgp.html


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

RAID 5 with 3Ware IDE

[Hetz Ben Hamo]

Hi all,

I'm planning to make up a file server for a project that I'm working on in my 
spare time. I'm planning to make it a 300GB File server (EIDE UDMA 5  - 5 X 
60 GB hard disk) - with 3Ware controller..

I got few questions:

1. Anyone tried to use this controller? any impressions? recommendations?

2. How are the drivers inside the kernel? in 2.2.x? 2.4.x?

I'm planning to use NFS with it, but so far from my knowledge, Linux NFS V2 
implementation are not good, and V3 is still experimental and unstable (if I 
understand that correctly). Any suggestions? lots of users will have to 
access this machine locally...

Any other suggestions regarding this RAID?

Thanks,
Hetz

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Ariel Biener]

On 29 Apr 2001, Oleg Goldshmidt wrote:


Server name | Server alias  | Stratum   | Status
+---+---+
timeserver.iix.net.il   | ntp.iix.net.il| stratum 2 | public
ntp.ilan.net.il | ntp.ac.il | stratum 0/1   | only stratum 2
  servers

--Ariel
> 
> Can anyone point me to a list of public NTP servers in Israel. A
> search on Google didn't yield anything useful. A search of this list's
> archive yielded a few addresses scattered over several threads, but I
> was wondering if a list similar to
> 
> http://www.eecis.udel.edu/~mills/ntp/servers.htm
> 
> exists.
> 
> Thanks,
> 
> --
> Oleg Goldshmidt | [EMAIL PROTECTED]
> "I'd rather write programs to write programs than write programs."
> 
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 

--
Ariel Biener
e-mail: [EMAIL PROTECTED]
PGP(6.5.8) public key http://www.tau.ac.il/~ariel/pgp.html


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[Uri Bruck]

Thanks.
I suppose I should have looked up that one

On Sun, 29 Apr 2001, Ilya Konstantinov wrote:

> On Sun, Apr 29, 2001 at 11:05:09AM +0300, Uri Bruck wrote:
> > 
> > 
> > I installed one on Windows, where it showed Hebrew fonts, but when I
> > looked at the files it saved (xml) I found that it uses an encoding I
> > couldn't recognize for Hebrew.
> > Aleph = d790
> > Bet = d791
> 
> This is UTF-8, which is used as an internal encoding throughout
> Abiword.
> 
> -- 
> Best regards,
> Ilya Konstantinov
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[Ilya Konstantinov]

On Sun, Apr 29, 2001 at 11:05:09AM +0300, Uri Bruck wrote:
> 
> 
> I installed one on Windows, where it showed Hebrew fonts, but when I
> looked at the files it saved (xml) I found that it uses an encoding I
> couldn't recognize for Hebrew.
> Aleph = d790
> Bet = d791

This is UTF-8, which is used as an internal encoding throughout
Abiword.

-- 
Best regards,
Ilya Konstantinov

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: removing password limitation under red hat

[Ilya Konstantinov]

On Sat, Apr 28, 2001 at 09:10:51PM +0200, Micha Feigin wrote:
> I there a way to remove the password length limitation that is installed on
> default with the red hat 7 instellation?
> I know that there is some posibility of doing this, because my debian
> instelation enables using empty passwords.

Yes, play with the options in /etc/pam.d/passwd.

-- 
Best regards,
Ilya Konstantinov

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

RE: pptp and kernel 2.4.4

[mulix]

hi,

i've had several reports now that pptp works fine with kernel 2.4.4. no
need for any more success reports, and hearty thanks to all those that
replied.

On Sun, 29 Apr 2001, Haim Gelfenbeyn wrote:

> I've upgraded to 2.4.4 from 2.4.2 today (mainly because of raiserfs
> fixes), and didn't notice anything wrong with pptp.

-- 
mulix
http://www.advogato.com/person/mulix

linux/reboot.h: #define LINUX_REBOOT_MAGIC1 0xfee1dead


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

PAM and samba

[Ely Levy]

did someone succed to make samba to work with PAM on redhat?
I need to know with both 2.0.7 and 2.2.0..


Ely Levy
System group
Hebrew University 
Jerusalem Israel




=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: lilo instellation problem

[Yedidya Bar-david]

Hi

use the option 'lba32' in your lilo.conf. Works like a charm.

didi

On Sat, Apr 28, 2001 at 09:10:59PM +0200, Micha Feigin wrote:
> Hello
> 
> I tried to install lilo on a new red hat 7 instalation.
> I tried to istall it on a 15 meg hda2 /boot, located after a 16 gig windows
> partition (which I can't move/remove etc.).
> I got an error (which coresponded to a comment during the installation
> formating stage) which said that lilo couldn't install,
> niether on hda2 nor on hda which reads as follows:
> 
> Warning:  device 0x0302 exceeds 1024 cylinders limit. Fatal: geo_comp_addr!
> cylinder number is too big (2040 > 1023).
> 
> I can reinstall/format the linux partition. I couldn't get linux to load off
> of  hda2 which contains the boot partition without lilo either (the computer
> just froze on startup).
> 
> The installation did boot ok from the boot disk.
> 
> Is there any way to solve this in order to use lilo instead of using loadlin
> instead?
> 
> Thank you.
> 
> Micha Feigin
> [EMAIL PROTECTED]
> 
> 
> 
> _
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

removing password limitation under red hat

[Micha Feigin]

I there a way to remove the password length limitation that is installed on
default with the red hat 7 instellation?
I know that there is some posibility of doing this, because my debian
instelation enables using empty passwords.

Thank you

Micha Feigin
[EMAIL PROTECTED]



_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[Uri Bruck]

I installed one on Windows, where it showed Hebrew fonts, but when I
looked at the files it saved (xml) I found that it uses an encoding I
couldn't recognize for Hebrew.
Aleph = d790
Bet = d791

etc.

I haven't had a chance to inquire about this, but could ths related to the
original question?

Thanks,
Uri

On Sun, 29 Apr 2001, Yedidya Bar-david wrote:

> Hi
> 
> I too havn't managed to make it use X fonts. It can use Type 1 fonts,
> though. I have put the pfa files from elmar in 
> /usr/local/lib/AbiSuite/fonts/ISO-8859-8, with 'LANG=he_IL.ISO-8859-8',
> and it at least managed to open Hebrew word files (with a broken bidi,
> but much better than anything else I tried). I havn't yet tried to even
> *write* hebrew in it (e.g. havn't yet put a correct hebrew keymap).
> 
>   didi
> 
> On Sun, Apr 29, 2001 at 12:18:31AM +0300, Oren Held wrote:
> > Hello People
> > 
> > I'vejust installed AbiWord for Linux. I cannot make it use a hebrew font.
> > Anybody suceeded ?
> > 
> > Thanks,
> > Oren.
> > 
> > 
> > =
> > To unsubscribe, send mail to [EMAIL PROTECTED]
> > the word "unsubscribe" in the message body, e.g., run the command
> > echo unsubscribe | mail [EMAIL PROTECTED]
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

lilo instellation problem

[Micha Feigin]

Hello

I tried to install lilo on a new red hat 7 instalation.
I tried to istall it on a 15 meg hda2 /boot, located after a 16 gig windows
partition (which I can't move/remove etc.).
I got an error (which coresponded to a comment during the installation
formating stage) which said that lilo couldn't install,
niether on hda2 nor on hda which reads as follows:

Warning:  device 0x0302 exceeds 1024 cylinders limit. Fatal: geo_comp_addr!
cylinder number is too big (2040 > 1023).

I can reinstall/format the linux partition. I couldn't get linux to load off
of  hda2 which contains the boot partition without lilo either (the computer
just froze on startup).

The installation did boot ok from the boot disk.

Is there any way to solve this in order to use lilo instead of using loadlin
instead?

Thank you.

Micha Feigin
[EMAIL PROTECTED]



_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

multilink

[mike ray]

Title: multilink





hi


does any one know if any 2.2.x kernel supports natively multilink in its ppp ??




Michael W Ray 
IT Manager 
* 
G-Connect - Helping ISPs to differentiate www.g-connect.com 
POB 2200, Herzlyia B, 46120, Israel 
 
Tel : + 972 9 960 1130 Mobile : + 972 58 636 545 
 *

Re: Looking for a (used) VLB SCSI card supported by Linux

[shaulka]

On Sun, Apr 29, 2001 at 02:23:23PM +0300, Yedidya Bar-david wrote:
> Hi
> 
> On Sun, Apr 29, 2001 at 01:19:29PM +0300, [EMAIL PROTECTED] wrote:
> > Can I still get a (used) VLB SCSI card supported by Linux?
> 
> What do you mean by 'still'? I don't know of a driver that was
> removed recently.
> There are few VLB adapters that appear in the standard 2.2.18
> kernel, e.g. UltraStor 34F, BusLogic BT-445C, etc.
> 
>   didi
> 
> > 
> > -- 
> > 
> > Shaul Karl <[EMAIL PROTECTED]>
> > 


I meant: does someone know if/how can I buy one? 

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Public NTP servers in Israel

[Michael Rozhavsky]

Hi,

I'm using ntp.netvision.net.il, but I'm not sure that this one is open for non 
Netvision customers.

On Sun, Apr 29, 2001 at 03:11:27PM +0300, Oleg Goldshmidt wrote:
> 
> Can anyone point me to a list of public NTP servers in Israel. A
> search on Google didn't yield anything useful. A search of this list's
> archive yielded a few addresses scattered over several threads, but I
> was wondering if a list similar to
> 
> http://www.eecis.udel.edu/~mills/ntp/servers.htm 
> 
> exists.
> 
> Thanks,
> 
> -- 
> Oleg Goldshmidt | [EMAIL PROTECTED] 
> "I'd rather write programs to write programs than write programs."
> 
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]

-- 
Regards,

   Michael Rozhavsky
   
   Optical Access
   Senior Software Engineer
   Tel:+972-4-9936248
   Fax:+972-4-9890564
   E-mail: [EMAIL PROTECTED]
   URL:www.opticalaccess.com

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

RE: pptp and kernel 2.4.4

[Haim Gelfenbeyn]

I've upgraded to 2.4.4 from 2.4.2 today (mainly because of raiserfs
fixes), and didn't notice anything wrong with pptp. I did several
connects/disconnects, and everything was smooth. In fact, I didn't
notice anything wrong with any other application also, although I didn't
do any extensive testing... My box is Intel ISP1100, P3-800/128MB, used
primarily as router/proxy/mail server.

Haim.

> 
> there was a small change in kernel 2.4.4, which _might_ cause pptp to
> exhibit strange behaviour. if anyone is using pptp with kernel 2.4,
> i'd appreaciate a [success|bug] report.
> 
> fyi, the change is that after a fork(), the child procces is 
> allowed to
> run first, and not the parent. apparently, this causes weird 
> behaviour in
> some applications. it should not affect pptp, but one never knows...
> -- 
> mulix
> http://www.advogato.com/person/mulix
> 
> linux/reboot.h: #define LINUX_REBOOT_MAGIC1 0xfee1dead
> 
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 
> 
> 


To unsubscribe, send 
mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Public NTP servers in Israel

[Oleg Goldshmidt]

Can anyone point me to a list of public NTP servers in Israel. A
search on Google didn't yield anything useful. A search of this list's
archive yielded a few addresses scattered over several threads, but I
was wondering if a list similar to

http://www.eecis.udel.edu/~mills/ntp/servers.htm 

exists.

Thanks,

-- 
Oleg Goldshmidt | [EMAIL PROTECTED] 
"I'd rather write programs to write programs than write programs."


=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[Yedidya Bar-david]

Hi

On Sun, Apr 29, 2001 at 10:35:03AM +0300, Tzafrir Cohen wrote:
> On Sun, 29 Apr 2001, Yedidya Bar-david wrote:
> 
> > On Sun, Apr 29, 2001 at 12:18:31AM +0300, Oren Held wrote:
[snip]
> 
> Doesn't it accept Hebrew characters from X?
> 

I don't know - I hope so. I havn't tried that yet. Also, when
I'll try, I need it to work from various X's, not only XFree86
(e.g. PCXware and eXceed under windows, HDS and NCD Xterminals,
as well as "Real" XFree86 on Linux). That's why I havn't yet.
It's easier to see hebrew than to type, and more important.

didi

> -- 
> Tzafrir Cohen
> mailto:[EMAIL PROTECTED]
> http://www.technion.ac.il/~tzafrir
> 

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: Looking for a (used) VLB SCSI card supported by Linux

[Yedidya Bar-david]

Hi

On Sun, Apr 29, 2001 at 01:19:29PM +0300, [EMAIL PROTECTED] wrote:
> Can I still get a (used) VLB SCSI card supported by Linux?

What do you mean by 'still'? I don't know of a driver that was
removed recently.
There are few VLB adapters that appear in the standard 2.2.18
kernel, e.g. UltraStor 34F, BusLogic BT-445C, etc.

didi

> 
> -- 
>   
>   Shaul Karl <[EMAIL PROTECTED]>
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Looking for a (used) VLB SCSI card supported by Linux

[shaulka]

Can I still get a (used) VLB SCSI card supported by Linux?

-- 

Shaul Karl <[EMAIL PROTECTED]>

=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew (fwd)

[Uri Bruck]

I installed one on Windows, where it showed Hebrew fonts, but when I
looked at the files it saved (xml) I found that it uses an encoding I
couldn't recognize for Hebrew.
Aleph = d790
Bet = d791

etc.

I haven't had a chance to inquire about this, but could ths related to the
original question?

Thanks,
Uri

On Sun, 29 Apr 2001, Yedidya Bar-david wrote:

> Hi
> 
> I too havn't managed to make it use X fonts. It can use Type 1 fonts,
> though. I have put the pfa files from elmar in 
> /usr/local/lib/AbiSuite/fonts/ISO-8859-8, with 'LANG=he_IL.ISO-8859-8',
> and it at least managed to open Hebrew word files (with a broken bidi,
> but much better than anything else I tried). I havn't yet tried to even
> *write* hebrew in it (e.g. havn't yet put a correct hebrew keymap).
> 
>   didi
> 
> On Sun, Apr 29, 2001 at 12:18:31AM +0300, Oren Held wrote:
> > Hello People
> > 
> > I'vejust installed AbiWord for Linux. I cannot make it use a hebrew font.
> > Anybody suceeded ?
> > 
> > Thanks,
> > Oren.
> > 
> > 
> > =
> > To unsubscribe, send mail to [EMAIL PROTECTED]
> > the word "unsubscribe" in the message body, e.g., run the command
> > echo unsubscribe | mail [EMAIL PROTECTED]
> 
> =
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
> 



=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Re: AbiWord - hebrew

[Tzafrir Cohen]

On Sun, 29 Apr 2001, Yedidya Bar-david wrote:

> On Sun, Apr 29, 2001 at 12:18:31AM +0300, Oren Held wrote:
> > Hello People
> >
> > I've just installed AbiWord for Linux. I cannot make it use a hebrew font.
> > Anybody suceeded ?
>
> I too havn't managed to make it use X fonts. It can use Type 1 fonts,
> though. I have put the pfa files from elmar in
> /usr/local/lib/AbiSuite/fonts/ISO-8859-8, with 'LANG=he_IL.ISO-8859-8',
> and it at least managed to open Hebrew word files (witha broken bidi,
> but much better than anything else I tried). I havn't yet tried to even
> *write* hebrew in it (e.g. havn't yet put a correct hebrew keymap).

Doesn't it accept Hebrew characters from X?

-- 
Tzafrir Cohen
mailto:[EMAIL PROTECTED]
http://www.technion.ac.il/~tzafrir



=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]