Just to check, you do have scsi cdrom support enabled right?
On 4/21/05, Tais M. Hansen <[EMAIL PROTECTED]> wrote: > Hi, > > I know there has been some talking about SATA/ATAPI being experimental and > might not work at all under kernel-2.6.x. > > One of my linux boxes has a Plextor DVD-RW drive with a SATA interface. The > kernel sees this drive (ata3) but apparently doesn't tie it to a sdx device. > The box also have a SATA harddisk, which is working just fine. The relevant > dmesg output is pasted below. > > Is there anything I can do to help the development of SATA/ATAPI devices? > > libata version 1.10 loaded. > sata_promise version 1.01 > ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 > ata1: SATA max UDMA/133 cmd 0xF8804200 ctl 0xF8804238 bmdma 0x0 irq 18 > ata2: SATA max UDMA/133 cmd 0xF8804280 ctl 0xF88042B8 bmdma 0x0 irq 18 > ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 > 88:407f > ata1: dev 0 ATA, max UDMA/133, 240121728 sectors: > ata1: dev 0 configured for UDMA/133 > scsi0 : sata_promise > ata2: no device found (phy stat 00000000) > scsi1 : sata_promise > Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 > Type: Direct-Access ANSI SCSI revision: 05 > sata_via version 1.1 > ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 > sata_via(0000:00:0f.0): routed to hard irq line 4 > ata3: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20 > ata4: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20 > ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 > 88:0007 > ata3: dev 0 ATAPI, max UDMA/33 > ata3: dev 0 configured for UDMA/33 > scsi2 : sata_via > ata4: no device found (phy stat 00000000) > scsi3 : sata_via > SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) > SCSI device sda: drive cache: write back > SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 < sda5 sda6 sda7 > > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > > -- > Regards, > Tais M. Hansen > OSD > > ___________________________________________________________ > "If people had understood how patents would be granted when most of today's > ideas were invented and had taken out patents, the industry would be at a > complete standstill today." -Bill Gates (1991) > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/