Re: ide.2.4.1-p3.01112001.patch
In-Reply-To: <[EMAIL PROTECTED]>
In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
(Bryan O'Sullivan) wrote:
> /dev/ide/host0/bus0/target0/lun0:hda: dma_intr: status=0x51 {
> DriveReady SeekComplete Error } hda: dma_intr: error=0x84 {
> DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady
> SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError
> BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
...
> 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev
> 02)
> 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305
> 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super]
> (rev 22)
> 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo]
> (rev 10)
> 00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> 00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> 00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
> ACPI] (rev 30)
It's not an Abit KT7 or similar is it?
I was just helping my dad upgrade a machine based with one of those to 2.4
today and until we turned off Generic PCI bus-master DMA Support and the
VIA82CXXX drivers we kept getting the same messages the second the system
booted up.
It was rather annoying, as I'm not sure if it was because of this or
something else, but we ended up with some minor disk corruption mainly
around /usr/src/linux where I made the mistake of doing a make mrproper
while it was like this. Went back to 2.2 temporarily and it was fine.
Can dig out/try anything on request.
TonyP
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
Re: ide.2.4.1-p3.01112001.patch
In-Reply-To: [EMAIL PROTECTED]
In article [EMAIL PROTECTED], [EMAIL PROTECTED]
(Bryan O'Sullivan) wrote:
/dev/ide/host0/bus0/target0/lun0:hda: dma_intr: status=0x51 {
DriveReady SeekComplete Error } hda: dma_intr: error=0x84 {
DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError
BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
...
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev
02)
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super]
(rev 22)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo]
(rev 10)
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] (rev 30)
It's not an Abit KT7 or similar is it?
I was just helping my dad upgrade a machine based with one of those to 2.4
today and until we turned off Generic PCI bus-master DMA Support and the
VIA82CXXX drivers we kept getting the same messages the second the system
booted up.
It was rather annoying, as I'm not sure if it was because of this or
something else, but we ended up with some minor disk corruption mainly
around /usr/src/linux where I made the mistake of doing a make mrproper
while it was like this. Went back to 2.2 temporarily and it was fine.
Can dig out/try anything on request.
TonyP
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
