Re: [BUG?] ISA-PnP and 3c509 NIC won't work together
lt;1,0>: sync: per=12 scntl3=0x90 scntl4=0x0 ofs=15 fak=0 chg=0. sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:07.2 PCI: The same IRQ used for device 00:0b.0 uhci.c: USB UHCI at I/O 0xe000, IRQ 11 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (2622) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed Adding Swap: 263144k swap-space (priority -1) eth0: Setting Rx mode to 1 addresses. Real Time Clock Driver v1.10d HTH, Viktor -- Viktor Rosenfeld WWW: http://www.informatik.hu-berlin.de/~rosenfel/ Geek Code (3.1): GCS/SS d-@ s+: a20 C++@ UL++$ P+ L+++ E--- W++ N++ o? K? !W O? M? V? PS++@ PE+(-) Y+ P?(+++) t+ 5+ X- R? !tv b+ DI+ D- G e>+++ h-- r- !y+ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
[BUG?] ISA-PnP and 3c509 NIC won't work together
Hi kernel hackers, I have troubles getting both ISA-PnP and the driver for my 3c509 NIC working together. Here are the error messages I get: Kernel 2.4.1 with ISA-PnP and 3c509 support compiled in, on boot time: # /etc/init.d/networking start SIOCSIFADDR: No such device eth0: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device eth0: unknown interface: No such device eth0: unknown interface: No such device With ISA-PnP compiled in, and 3c509 support compiled as module: # modprobe 3c509 /lib/modules/2.4.1/kernel/drivers/net/3c509.o: invalid parameter parm_io /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod /lib/modules/2.4.1/kernel/drivers/net/3c509.o failed /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod 3c509 failed With both ISA-PnP and 3c509 compiled as modules: # modprobe 3c509 isapnp: Scanning for Pnp cards... isapnp: Card 'TERRATEC SOUNDSYSTEM BASE 1' isapnp: 1 Plug & Play card detected total /lib/modules/2.4.1/kernel/drivers/net/3c509.o: invalid parameter parm_io /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod /lib/modules/2.4.1/kernel/drivers/net/3c509.o failed /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod 3c509 failed # insmod /lib/modules/2.4.1/kernel/drivers/net/3c509.o /lib/modules/2.4.1/kernel/drivers/net/3c509.o: unresolved symbol isapnp_find_dev_Rb2fa20db I can only get my NIC to work when I leave ISA-PnP completely out of the kernel. When I have ISA-PnP activated, the card will not show up in /proc/isapnp (see below) nor is it listed in the table that my system displays prior to starting LILO. The kernel help on the 3c509 driver suggests to completely deactivate PNP for the NIC, which is what I have done since kernel 2.0.x. Unfortunately, I can't find info on re-enabling PNP on the card. Below, I have attached the content of /proc/isapnp. If I can do anything to provide more info, let me know. Thanks for a great kernel, Viktor -- Viktor Rosenfeld WWW: http://www.informatik.hu-berlin.de/~rosenfel/ Geek Code (3.1): GCS/SS d-@ s+: a20 C++@ UL++$ P+ L+++ E--- W++ N++ o? K? !W O? M? V? PS++@ PE+(-) Y+ P?(+++) t+ 5+ X- R? !tv b+ DI+ D- G e>+++ h-- r- !y+ Card 1 'TER1411:TERRATEC SOUNDSYSTEM BASE 1' PnP version 1.0 Product version 1.1 Logical device 0 'ADS7180:Unknown' Supported registers 0x2 Device is not active Resources 0 Priority preferred Port 0x220-0x220, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding Port 0x530-0x530, align 0x7, size 0x10, 16-bit address decoding IRQ 5 High-Edge DMA 1 8-bit byte-count type-A DMA 3 8-bit byte-count type-A Alternate resources 0:1 Priority acceptable Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding Port 0x530-0x530, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA 0,1,3 8-bit byte-count type-A Alternate resources 0:2 Priority functional Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x3b8, align 0x7, size 0x4, 16-bit address decoding Port 0x500-0x560, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7,10 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA 0,1,3 8-bit byte-count type-A Alternate resources 0:3 Priority functional Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x3b8, align 0x7, size 0x4, 16-bit address decoding Port 0x500-0x620, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7,10,11 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA 8-bit byte-count type-A Alternate resources 0:4 Priority functional Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x3b8, align 0x7, size 0x4, 16-bit address decoding Port 0x500-0x620, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7,2/9,10,11,15 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA 8-bit byte-count type-A Logical device 1 'ADS7181:Unknown' Supported registers 0x2 Compatible device PNPb006 Device is not active Resources 0 Priority preferred Port 0x330-0x330, align 0xf, size 0x2, 16-bit address decoding IRQ 2/9 High-Edge Alternate resources 0:1 Priority acceptable Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding IRQ 2/9 High-Edge Alternate resources 0:2 Priority functional Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding IRQ 2/9,10,11,15 High-Edge Logical device 2 'ADS7182:Unknown' Supported registers 0x2 Compatible device PNPb02f Device is not active Resources 0 P
[BUG?] ISA-PnP and 3c509 NIC won't work together
Hi kernel hackers, I have troubles getting both ISA-PnP and the driver for my 3c509 NIC working together. Here are the error messages I get: Kernel 2.4.1 with ISA-PnP and 3c509 support compiled in, on boot time: # /etc/init.d/networking start SIOCSIFADDR: No such device eth0: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device eth0: unknown interface: No such device eth0: unknown interface: No such device With ISA-PnP compiled in, and 3c509 support compiled as module: # modprobe 3c509 /lib/modules/2.4.1/kernel/drivers/net/3c509.o: invalid parameter parm_io /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod /lib/modules/2.4.1/kernel/drivers/net/3c509.o failed /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod 3c509 failed With both ISA-PnP and 3c509 compiled as modules: # modprobe 3c509 isapnp: Scanning for Pnp cards... isapnp: Card 'TERRATEC SOUNDSYSTEM BASE 1' isapnp: 1 Plug Play card detected total /lib/modules/2.4.1/kernel/drivers/net/3c509.o: invalid parameter parm_io /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod /lib/modules/2.4.1/kernel/drivers/net/3c509.o failed /lib/modules/2.4.1/kernel/drivers/net/3c509.o: insmod 3c509 failed # insmod /lib/modules/2.4.1/kernel/drivers/net/3c509.o /lib/modules/2.4.1/kernel/drivers/net/3c509.o: unresolved symbol isapnp_find_dev_Rb2fa20db I can only get my NIC to work when I leave ISA-PnP completely out of the kernel. When I have ISA-PnP activated, the card will not show up in /proc/isapnp (see below) nor is it listed in the table that my system displays prior to starting LILO. The kernel help on the 3c509 driver suggests to completely deactivate PNP for the NIC, which is what I have done since kernel 2.0.x. Unfortunately, I can't find info on re-enabling PNP on the card. Below, I have attached the content of /proc/isapnp. If I can do anything to provide more info, let me know. Thanks for a great kernel, Viktor -- Viktor Rosenfeld WWW: http://www.informatik.hu-berlin.de/~rosenfel/ Geek Code (3.1): GCS/SS d-@ s+: a20 C++@ UL++$ P+ L+++ E--- W++ N++ o? K? !W O? M? V? PS++@ PE+(-) Y+ P?(+++) t+ 5+ X- R? !tv b+ DI+ D- G e+++ h-- r- !y+ Card 1 'TER1411:TERRATEC SOUNDSYSTEM BASE 1' PnP version 1.0 Product version 1.1 Logical device 0 'ADS7180:Unknown' Supported registers 0x2 Device is not active Resources 0 Priority preferred Port 0x220-0x220, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding Port 0x530-0x530, align 0x7, size 0x10, 16-bit address decoding IRQ 5 High-Edge DMA 1 8-bit byte-count type-A DMA 3 8-bit byte-count type-A Alternate resources 0:1 Priority acceptable Port 0x220-0x240, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding Port 0x530-0x530, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA 0,1,3 8-bit byte-count type-A Alternate resources 0:2 Priority functional Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x3b8, align 0x7, size 0x4, 16-bit address decoding Port 0x500-0x560, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7,10 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA 0,1,3 8-bit byte-count type-A Alternate resources 0:3 Priority functional Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x3b8, align 0x7, size 0x4, 16-bit address decoding Port 0x500-0x620, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7,10,11 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA none 8-bit byte-count type-A Alternate resources 0:4 Priority functional Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding Port 0x388-0x3b8, align 0x7, size 0x4, 16-bit address decoding Port 0x500-0x620, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7,2/9,10,11,15 High-Edge DMA 0,1,3 8-bit byte-count type-A DMA none 8-bit byte-count type-A Logical device 1 'ADS7181:Unknown' Supported registers 0x2 Compatible device PNPb006 Device is not active Resources 0 Priority preferred Port 0x330-0x330, align 0xf, size 0x2, 16-bit address decoding IRQ 2/9 High-Edge Alternate resources 0:1 Priority acceptable Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding IRQ 2/9 High-Edge Alternate resources 0:2 Priority functional Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding IRQ 2/9,10,11,15 High-Edge Logical device 2 'ADS7182:Unknown' Supported registers 0x2 Compatible device PNPb02f Device is not active Resources 0 Priority
Re: [BUG?] ISA-PnP and 3c509 NIC won't work together
Time Clock Driver v1.10d HTH, Viktor -- Viktor Rosenfeld WWW: http://www.informatik.hu-berlin.de/~rosenfel/ Geek Code (3.1): GCS/SS d-@ s+: a20 C++@ UL++$ P+ L+++ E--- W++ N++ o? K? !W O? M? V? PS++@ PE+(-) Y+ P?(+++) t+ 5+ X- R? !tv b+ DI+ D- G e+++ h-- r- !y+ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
