Re: [PATCH] hwmon/sch5627: Use common error handling code in sch5627_probe()
On Tue, Mar 13, 2018 at 09:19:22AM +0100, Hans de Goede wrote: > Hi, > > On 12-03-18 22:23, SF Markus Elfring wrote: > >From: Markus Elfring> >Date: Mon, 12 Mar 2018 22:15:59 +0100 > > > >Adjust jump targets so that a bit of exception handling can be better > >reused at the end of this function. > > > >This issue was detected by using the Coccinelle software. > > > >Signed-off-by: Markus Elfring > > So now we have a goto set_error_code with the code at the set_error_code > doing something and then doing another goto. No, just no. goto-s going to > a label calling another goto is completely unreadable. > > I really do not see any reason for the proposed changes, they may remove > a small amount of code duplication, but at a hugh cost wrt readability. > > TL;DR: NACK > Fully agree. NACK confirmed. Guenter > Regards, > > Hans > > > > >--- > > drivers/hwmon/sch5627.c | 60 > > - > > 1 file changed, 29 insertions(+), 31 deletions(-) > > > >diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c > >index 91544f2312e6..e7a2a974ab74 100644 > >--- a/drivers/hwmon/sch5627.c > >+++ b/drivers/hwmon/sch5627.c > >@@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, data); > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > if (val != SCH5627_HWMON_ID) { > > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", > >val, SCH5627_HWMON_ID); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > if (val != SCH5627_COMPANY_ID) { > > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", > >val, SCH5627_COMPANY_ID); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > if (val != SCH5627_PRIMARY_ID) { > > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", > >val, SCH5627_PRIMARY_ID); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > build_code = sch56xx_read_virtual_reg(data->addr, > > SCH5627_REG_BUILD_CODE); > > if (build_code < 0) { > > err = build_code; > >-goto error; > >+goto remove_device; > > } > > build_id = sch56xx_read_virtual_reg16(data->addr, > > SCH5627_REG_BUILD_ID); > > if (build_id < 0) { > > err = build_id; > >-goto error; > >+goto remove_device; > > } > > hwmon_rev = sch56xx_read_virtual_reg(data->addr, > > SCH5627_REG_HWMON_REV); > > if (hwmon_rev < 0) { > > err = hwmon_rev; > >-goto error; > >+goto remove_device; > > } > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > data->control = val; > > if (!(data->control & 0x01)) { > > pr_err("hardware monitoring not enabled\n"); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > /* Trigger a Vbat voltage measurement, so that we get a valid reading > >the first time we read Vbat */ > >@@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev) > > */ > > err = sch5627_read_limits(data); > > if (err) > >-goto error; > >+goto remove_device; > > pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); > > pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", > >@@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev) > > /* Register sysfs interface files */ > > err = sysfs_create_group(>dev.kobj, _group); > > if (err) > >-goto error; > >+goto remove_device; > > data->hwmon_dev = hwmon_device_register(>dev); > > if (IS_ERR(data->hwmon_dev)) { > > err = PTR_ERR(data->hwmon_dev); > > data->hwmon_dev =
Re: [PATCH] hwmon/sch5627: Use common error handling code in sch5627_probe()
On Tue, Mar 13, 2018 at 09:19:22AM +0100, Hans de Goede wrote: > Hi, > > On 12-03-18 22:23, SF Markus Elfring wrote: > >From: Markus Elfring > >Date: Mon, 12 Mar 2018 22:15:59 +0100 > > > >Adjust jump targets so that a bit of exception handling can be better > >reused at the end of this function. > > > >This issue was detected by using the Coccinelle software. > > > >Signed-off-by: Markus Elfring > > So now we have a goto set_error_code with the code at the set_error_code > doing something and then doing another goto. No, just no. goto-s going to > a label calling another goto is completely unreadable. > > I really do not see any reason for the proposed changes, they may remove > a small amount of code duplication, but at a hugh cost wrt readability. > > TL;DR: NACK > Fully agree. NACK confirmed. Guenter > Regards, > > Hans > > > > >--- > > drivers/hwmon/sch5627.c | 60 > > - > > 1 file changed, 29 insertions(+), 31 deletions(-) > > > >diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c > >index 91544f2312e6..e7a2a974ab74 100644 > >--- a/drivers/hwmon/sch5627.c > >+++ b/drivers/hwmon/sch5627.c > >@@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, data); > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > if (val != SCH5627_HWMON_ID) { > > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", > >val, SCH5627_HWMON_ID); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > if (val != SCH5627_COMPANY_ID) { > > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", > >val, SCH5627_COMPANY_ID); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > if (val != SCH5627_PRIMARY_ID) { > > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", > >val, SCH5627_PRIMARY_ID); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > build_code = sch56xx_read_virtual_reg(data->addr, > > SCH5627_REG_BUILD_CODE); > > if (build_code < 0) { > > err = build_code; > >-goto error; > >+goto remove_device; > > } > > build_id = sch56xx_read_virtual_reg16(data->addr, > > SCH5627_REG_BUILD_ID); > > if (build_id < 0) { > > err = build_id; > >-goto error; > >+goto remove_device; > > } > > hwmon_rev = sch56xx_read_virtual_reg(data->addr, > > SCH5627_REG_HWMON_REV); > > if (hwmon_rev < 0) { > > err = hwmon_rev; > >-goto error; > >+goto remove_device; > > } > > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); > >-if (val < 0) { > >-err = val; > >-goto error; > >-} > >+if (val < 0) > >+goto set_error_code; > >+ > > data->control = val; > > if (!(data->control & 0x01)) { > > pr_err("hardware monitoring not enabled\n"); > >-err = -ENODEV; > >-goto error; > >+goto e_nodev; > > } > > /* Trigger a Vbat voltage measurement, so that we get a valid reading > >the first time we read Vbat */ > >@@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev) > > */ > > err = sch5627_read_limits(data); > > if (err) > >-goto error; > >+goto remove_device; > > pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); > > pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", > >@@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev) > > /* Register sysfs interface files */ > > err = sysfs_create_group(>dev.kobj, _group); > > if (err) > >-goto error; > >+goto remove_device; > > data->hwmon_dev = hwmon_device_register(>dev); > > if (IS_ERR(data->hwmon_dev)) { > > err = PTR_ERR(data->hwmon_dev); > > data->hwmon_dev = NULL; > >-goto error; > >+goto
Re: [PATCH] hwmon/sch5627: Use common error handling code in sch5627_probe()
Hi, On 12-03-18 22:23, SF Markus Elfring wrote: From: Markus ElfringDate: Mon, 12 Mar 2018 22:15:59 +0100 Adjust jump targets so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring So now we have a goto set_error_code with the code at the set_error_code doing something and then doing another goto. No, just no. goto-s going to a label calling another goto is completely unreadable. I really do not see any reason for the proposed changes, they may remove a small amount of code duplication, but at a hugh cost wrt readability. TL;DR: NACK Regards, Hans --- drivers/hwmon/sch5627.c | 60 - 1 file changed, 29 insertions(+), 31 deletions(-) diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 91544f2312e6..e7a2a974ab74 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_HWMON_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", val, SCH5627_HWMON_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_COMPANY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", val, SCH5627_COMPANY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_PRIMARY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", val, SCH5627_PRIMARY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } build_code = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_BUILD_CODE); if (build_code < 0) { err = build_code; - goto error; + goto remove_device; } build_id = sch56xx_read_virtual_reg16(data->addr, SCH5627_REG_BUILD_ID); if (build_id < 0) { err = build_id; - goto error; + goto remove_device; } hwmon_rev = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_REV); if (hwmon_rev < 0) { err = hwmon_rev; - goto error; + goto remove_device; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + data->control = val; if (!(data->control & 0x01)) { pr_err("hardware monitoring not enabled\n"); - err = -ENODEV; - goto error; + goto e_nodev; } /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ @@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev) */ err = sch5627_read_limits(data); if (err) - goto error; + goto remove_device; pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", @@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev) /* Register sysfs interface files */ err = sysfs_create_group(>dev.kobj, _group); if (err) - goto error; + goto remove_device; data->hwmon_dev = hwmon_device_register(>dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); data->hwmon_dev = NULL; - goto error; + goto remove_device; } /* Note failing to register the watchdog is not a fatal error */ @@ -584,7 +576,13 @@ static int sch5627_probe(struct platform_device
Re: [PATCH] hwmon/sch5627: Use common error handling code in sch5627_probe()
Hi, On 12-03-18 22:23, SF Markus Elfring wrote: From: Markus Elfring Date: Mon, 12 Mar 2018 22:15:59 +0100 Adjust jump targets so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring So now we have a goto set_error_code with the code at the set_error_code doing something and then doing another goto. No, just no. goto-s going to a label calling another goto is completely unreadable. I really do not see any reason for the proposed changes, they may remove a small amount of code duplication, but at a hugh cost wrt readability. TL;DR: NACK Regards, Hans --- drivers/hwmon/sch5627.c | 60 - 1 file changed, 29 insertions(+), 31 deletions(-) diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 91544f2312e6..e7a2a974ab74 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_HWMON_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", val, SCH5627_HWMON_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_COMPANY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", val, SCH5627_COMPANY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_PRIMARY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", val, SCH5627_PRIMARY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } build_code = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_BUILD_CODE); if (build_code < 0) { err = build_code; - goto error; + goto remove_device; } build_id = sch56xx_read_virtual_reg16(data->addr, SCH5627_REG_BUILD_ID); if (build_id < 0) { err = build_id; - goto error; + goto remove_device; } hwmon_rev = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_REV); if (hwmon_rev < 0) { err = hwmon_rev; - goto error; + goto remove_device; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + data->control = val; if (!(data->control & 0x01)) { pr_err("hardware monitoring not enabled\n"); - err = -ENODEV; - goto error; + goto e_nodev; } /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ @@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev) */ err = sch5627_read_limits(data); if (err) - goto error; + goto remove_device; pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", @@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev) /* Register sysfs interface files */ err = sysfs_create_group(>dev.kobj, _group); if (err) - goto error; + goto remove_device; data->hwmon_dev = hwmon_device_register(>dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); data->hwmon_dev = NULL; - goto error; + goto remove_device; } /* Note failing to register the watchdog is not a fatal error */ @@ -584,7 +576,13 @@ static int sch5627_probe(struct platform_device *pdev) return 0; -error: +set_error_code: + err =
[PATCH] hwmon/sch5627: Use common error handling code in sch5627_probe()
From: Markus ElfringDate: Mon, 12 Mar 2018 22:15:59 +0100 Adjust jump targets so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring --- drivers/hwmon/sch5627.c | 60 - 1 file changed, 29 insertions(+), 31 deletions(-) diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 91544f2312e6..e7a2a974ab74 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_HWMON_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", val, SCH5627_HWMON_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_COMPANY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", val, SCH5627_COMPANY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_PRIMARY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", val, SCH5627_PRIMARY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } build_code = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_BUILD_CODE); if (build_code < 0) { err = build_code; - goto error; + goto remove_device; } build_id = sch56xx_read_virtual_reg16(data->addr, SCH5627_REG_BUILD_ID); if (build_id < 0) { err = build_id; - goto error; + goto remove_device; } hwmon_rev = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_REV); if (hwmon_rev < 0) { err = hwmon_rev; - goto error; + goto remove_device; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + data->control = val; if (!(data->control & 0x01)) { pr_err("hardware monitoring not enabled\n"); - err = -ENODEV; - goto error; + goto e_nodev; } /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ @@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev) */ err = sch5627_read_limits(data); if (err) - goto error; + goto remove_device; pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", @@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev) /* Register sysfs interface files */ err = sysfs_create_group(>dev.kobj, _group); if (err) - goto error; + goto remove_device; data->hwmon_dev = hwmon_device_register(>dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); data->hwmon_dev = NULL; - goto error; + goto remove_device; } /* Note failing to register the watchdog is not a fatal error */ @@ -584,7 +576,13 @@ static int sch5627_probe(struct platform_device *pdev) return 0; -error: +set_error_code: + err = val; + goto remove_device; + +e_nodev: + err = -ENODEV; +remove_device: sch5627_remove(pdev); return err; } -- 2.16.2
[PATCH] hwmon/sch5627: Use common error handling code in sch5627_probe()
From: Markus Elfring Date: Mon, 12 Mar 2018 22:15:59 +0100 Adjust jump targets so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring --- drivers/hwmon/sch5627.c | 60 - 1 file changed, 29 insertions(+), 31 deletions(-) diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 91544f2312e6..e7a2a974ab74 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_HWMON_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", val, SCH5627_HWMON_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_COMPANY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", val, SCH5627_COMPANY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + if (val != SCH5627_PRIMARY_ID) { pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", val, SCH5627_PRIMARY_ID); - err = -ENODEV; - goto error; + goto e_nodev; } build_code = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_BUILD_CODE); if (build_code < 0) { err = build_code; - goto error; + goto remove_device; } build_id = sch56xx_read_virtual_reg16(data->addr, SCH5627_REG_BUILD_ID); if (build_id < 0) { err = build_id; - goto error; + goto remove_device; } hwmon_rev = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_REV); if (hwmon_rev < 0) { err = hwmon_rev; - goto error; + goto remove_device; } val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); - if (val < 0) { - err = val; - goto error; - } + if (val < 0) + goto set_error_code; + data->control = val; if (!(data->control & 0x01)) { pr_err("hardware monitoring not enabled\n"); - err = -ENODEV; - goto error; + goto e_nodev; } /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ @@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev) */ err = sch5627_read_limits(data); if (err) - goto error; + goto remove_device; pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", @@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev) /* Register sysfs interface files */ err = sysfs_create_group(>dev.kobj, _group); if (err) - goto error; + goto remove_device; data->hwmon_dev = hwmon_device_register(>dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); data->hwmon_dev = NULL; - goto error; + goto remove_device; } /* Note failing to register the watchdog is not a fatal error */ @@ -584,7 +576,13 @@ static int sch5627_probe(struct platform_device *pdev) return 0; -error: +set_error_code: + err = val; + goto remove_device; + +e_nodev: + err = -ENODEV; +remove_device: sch5627_remove(pdev); return err; } -- 2.16.2