Re: [PATCH V2 3/3] arm: dts: zynq: Add Digilent ZYBO board
On Sat, Nov 29, 2014 at 1:34 PM, Sören Brinkmann wrote: > Hi Peter, > > The patches look all good to me. But you may want to check your CC > lists. I think at least the DT list should be included. > Resent > For the whole series: > Acked-by: Soren Brinkmann > Thanks, Regards, Peter > Thanks, > Sören > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH V2 3/3] arm: dts: zynq: Add Digilent ZYBO board
On Sat, Nov 29, 2014 at 1:34 PM, Sören Brinkmann soren.brinkm...@xilinx.com wrote: Hi Peter, The patches look all good to me. But you may want to check your CC lists. I think at least the DT list should be included. Resent For the whole series: Acked-by: Soren Brinkmann soren.brinkm...@xilinx.com Thanks, Regards, Peter Thanks, Sören -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH V2 3/3] arm: dts: zynq: Add Digilent ZYBO board
Hi Peter, The patches look all good to me. But you may want to check your CC lists. I think at least the DT list should be included. For the whole series: Acked-by: Soren Brinkmann Thanks, Sören -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH V2 3/3] arm: dts: zynq: Add Digilent ZYBO board
Add a DTS describing the Digilent ZYBO board. Similar to ZED but with
a 50MHz crystal instead of 33MHz.
Signed-off-by: Peter Crosthwaite
---
Changed since v1:
Change compat vendor prefix from xlnx to digilent (Soren review)
Alphabetise nodes
---
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/zynq-zybo.dts | 52 +
2 files changed, 54 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/zynq-zybo.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7cd36a7..be2e8ce 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -513,7 +513,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-parallella.dtb \
zynq-zc702.dtb \
zynq-zc706.dtb \
- zynq-zed.dtb
+ zynq-zed.dtb \
+ zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
armada-370-mirabox.dtb \
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
new file mode 100644
index 000..a9a12ce
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZYBO Development Board";
+ compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ };
+
+};
+
+ {
+ ps-clk-frequency = <5000>;
+};
+
+ {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ {
+ status = "okay";
+};
+
+ {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[PATCH V2 3/3] arm: dts: zynq: Add Digilent ZYBO board
Add a DTS describing the Digilent ZYBO board. Similar to ZED but with
a 50MHz crystal instead of 33MHz.
Signed-off-by: Peter Crosthwaite crosthwaite.pe...@gmail.com
---
Changed since v1:
Change compat vendor prefix from xlnx to digilent (Soren review)
Alphabetise nodes
---
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/zynq-zybo.dts | 52 +
2 files changed, 54 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/zynq-zybo.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7cd36a7..be2e8ce 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -513,7 +513,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-parallella.dtb \
zynq-zc702.dtb \
zynq-zc706.dtb \
- zynq-zed.dtb
+ zynq-zed.dtb \
+ zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
armada-370-mirabox.dtb \
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
new file mode 100644
index 000..a9a12ce
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ zynq-7000.dtsi
+
+/ {
+ model = Zynq ZYBO Development Board;
+ compatible = digilent,zynq-zybo, xlnx,zynq-7000;
+
+ memory {
+ device_type = memory;
+ reg = 0x0 0x2000;
+ };
+
+ chosen {
+ bootargs = console=ttyPS0,115200 earlyprintk;
+ };
+
+};
+
+clkc {
+ ps-clk-frequency = 5000;
+};
+
+gem0 {
+ status = okay;
+ phy-mode = rgmii-id;
+ phy-handle = ethernet_phy;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = 0;
+ };
+};
+
+sdhci0 {
+ status = okay;
+};
+
+uart1 {
+ status = okay;
+};
--
1.9.1
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH V2 3/3] arm: dts: zynq: Add Digilent ZYBO board
Hi Peter, The patches look all good to me. But you may want to check your CC lists. I think at least the DT list should be included. For the whole series: Acked-by: Soren Brinkmann soren.brinkm...@xilinx.com Thanks, Sören -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
