RE: [PATCH net 1/3] r8169:fix nic sometimes doesn't work after changing the mac address.
> Instead of taking the device out of suspended mode to perform the required > action, the driver is moving to a model where 1) said action may be > scheduled to a later time - or result from past time work - and 2) rpm handler > must handle a lot of pm unrelated work. > > rtl8169_ethtool_ops.{get_wol, get_regs, get_settings} aren't even fixed yet > (what about the .set_xyz handlers ?). > > I can't help thinking that the driver should return to a state where it > stupidly > does what it is asked to. No software caching, plain device access, resume > when needed, suspend as "suspend" instead of suspend as "anticipate > whatever may happen to avoid waking up". > This rpm related patches just the workaround for the issues reported by end users. As you say, the Linux kernel should handle these events when driver is in runtime suspend state. --Please consider the environment before printing this e-mail.
Re: [PATCH net 1/3] r8169:fix nic sometimes doesn't work after changing the mac address.
Chunhao Lin : > When there is no AC power, NIC doesn't work after changing mac address. > Please refer to following link. > http://www.spinics.net/lists/netdev/msg356572.html > > This issue is caused by runtime power management. When there is no AC power, > if we > put NIC down (ifconfig down), the driver will be put in runtime suspend state > and > device will in D3 state. In this time, driver cannot access hardware > regisers. So > if you set new mac address during this time, it will not work. And then, after > resume, the NIC will keep using the old mac address and so the network will > not > work normally. > > In this patch I add detecting runtime pm state when setting mac address. If > driver is in runtime suspend, I will skip setting mac address and set the new > mac address during runtime resume. Instead of taking the device out of suspended mode to perform the required action, the driver is moving to a model where 1) said action may be scheduled to a later time - or result from past time work - and 2) rpm handler must handle a lot of pm unrelated work. rtl8169_ethtool_ops.{get_wol, get_regs, get_settings} aren't even fixed yet (what about the .set_xyz handlers ?). I can't help thinking that the driver should return to a state where it stupidly does what it is asked to. No software caching, plain device access, resume when needed, suspend as "suspend" instead of suspend as "anticipate whatever may happen to avoid waking up". -- Ueimor
[PATCH net 1/3] r8169:fix nic sometimes doesn't work after changing the mac address.
When there is no AC power, NIC doesn't work after changing mac address. Please refer to following link. http://www.spinics.net/lists/netdev/msg356572.html This issue is caused by runtime power management. When there is no AC power, if we put NIC down (ifconfig down), the driver will be put in runtime suspend state and device will in D3 state. In this time, driver cannot access hardware regisers. So if you set new mac address during this time, it will not work. And then, after resume, the NIC will keep using the old mac address and so the network will not work normally. In this patch I add detecting runtime pm state when setting mac address. If driver is in runtime suspend, I will skip setting mac address and set the new mac address during runtime resume. Signed-off-by: Chunhao Lin --- drivers/net/ethernet/realtek/r8169.c | 10 +- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 4caeacb..432b278 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4457,6 +4457,7 @@ static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr) static int rtl_set_mac_address(struct net_device *dev, void *p) { struct rtl8169_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; struct sockaddr *addr = p; if (!is_valid_ether_addr(addr->sa_data)) @@ -4464,7 +4465,12 @@ static int rtl_set_mac_address(struct net_device *dev, void *p) memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - rtl_rar_set(tp, dev->dev_addr); + pm_runtime_get_noresume(&pdev->dev); + + if (pm_runtime_active(&pdev->dev)) + rtl_rar_set(tp, dev->dev_addr); + + pm_runtime_put_noidle(&pdev->dev); return 0; } @@ -7872,6 +7878,8 @@ static int rtl8169_runtime_resume(struct device *device) struct net_device *dev = pci_get_drvdata(pdev); struct rtl8169_private *tp = netdev_priv(dev); + rtl_rar_set(tp, dev->dev_addr); + if (!tp->TxDescArray) return 0; -- 1.9.1