Re: [PATCH v1 04/12] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals
On Wed, Feb 20, 2019 at 6:55 AM Eduardo Valentin wrote: > > On Mon, Feb 18, 2019 at 06:05:18PM +0530, Amit Kucheria wrote: > > msm8996 has a total of 21 temperature sensors. Populate DT with > > information about them. > > > > There are 2 sensors on each of the cpus - one on the top, the other > > below (we only expose one on the top in DT for now). For the GPU, we > > expose both, the one on the top and the one below. > > > > Depending on the version of the silicon, sensor 2 is either placed near > > the L3 cache or the venus video decoder. It would've been nice to be > > able to be version-specific but we don't have DTs that differentiate the > > two versions of silicon yet. > > > > Signed-off-by: Amit Kucheria > > --- > > arch/arm64/boot/dts/qcom/msm8996.dtsi | 98 +++ > > 1 file changed, 98 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi > > b/arch/arm64/boot/dts/qcom/msm8996.dtsi > > index ae6e9f0778f0..8e36a39e1386 100644 > > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > > @@ -237,6 +237,104 @@ > > }; > > }; > > }; > > + > > + gpu-thermal-top { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 6>; > > + > > + trips { > > + gpu1_alert0: trip-point@0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > What is the cooling map for this? I'm working on it. Will send out an update. > > + }; > > + > > + gpu1_crit: gpu_crit { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + gpu-thermal-bottom { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 7>; > > + > > + trips { > > + gpu2_alert0: trip-point@0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + > > + gpu2_crit: gpu_crit { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + m4m-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 1>; > > + }; > > + > > + l3_or_venus-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 2>; > > + }; > > + > > + cluster0-l2-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 7>; > > + }; > > + > > + cluster1-l2-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 12>; > > + }; > > + > > + camera-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 1>; > > + }; > > + > > + q6-dsp-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 2>; > > + }; > > + > > + mem-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 3>; > > + }; > > + > > + modemtx-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = < 4>; > > + }; > > }; > > > > timer { > > -- > > 2.17.1 > >
Re: [PATCH v1 04/12] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals
On Mon, Feb 18, 2019 at 06:05:18PM +0530, Amit Kucheria wrote: > msm8996 has a total of 21 temperature sensors. Populate DT with > information about them. > > There are 2 sensors on each of the cpus - one on the top, the other > below (we only expose one on the top in DT for now). For the GPU, we > expose both, the one on the top and the one below. > > Depending on the version of the silicon, sensor 2 is either placed near > the L3 cache or the venus video decoder. It would've been nice to be > able to be version-specific but we don't have DTs that differentiate the > two versions of silicon yet. > > Signed-off-by: Amit Kucheria > --- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 98 +++ > 1 file changed, 98 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi > b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index ae6e9f0778f0..8e36a39e1386 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -237,6 +237,104 @@ > }; > }; > }; > + > + gpu-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 6>; > + > + trips { > + gpu1_alert0: trip-point@0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; What is the cooling map for this? > + }; > + > + gpu1_crit: gpu_crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + gpu-thermal-bottom { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 7>; > + > + trips { > + gpu2_alert0: trip-point@0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + gpu2_crit: gpu_crit { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + m4m-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 1>; > + }; > + > + l3_or_venus-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 2>; > + }; > + > + cluster0-l2-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 7>; > + }; > + > + cluster1-l2-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 12>; > + }; > + > + camera-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 1>; > + }; > + > + q6-dsp-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 2>; > + }; > + > + mem-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 3>; > + }; > + > + modemtx-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = < 4>; > + }; > }; > > timer { > -- > 2.17.1 >
[PATCH v1 04/12] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals
msm8996 has a total of 21 temperature sensors. Populate DT with information about them. There are 2 sensors on each of the cpus - one on the top, the other below (we only expose one on the top in DT for now). For the GPU, we expose both, the one on the top and the one below. Depending on the version of the silicon, sensor 2 is either placed near the L3 cache or the venus video decoder. It would've been nice to be able to be version-specific but we don't have DTs that differentiate the two versions of silicon yet. Signed-off-by: Amit Kucheria --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 98 +++ 1 file changed, 98 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ae6e9f0778f0..8e36a39e1386 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -237,6 +237,104 @@ }; }; }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 6>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu1_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 7>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu2_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 1>; + }; + + l3_or_venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 2>; + }; + + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 7>; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 12>; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 1>; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 2>; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 3>; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = < 4>; + }; }; timer { -- 2.17.1