The reset value of INTF_CONFIG2 register is changed
for SC7280 family. Changes are added to program
this register correctly based on the target.
DATA_HCTL_EN in INTF_CONFIG2 register allows data
to be transferred at a different rate than video
timing. When this is set, the number of data per
line follows DISPLAY_DATA_HCTL register value.
This change adds support to program these
registers for sc7280 target.
Signed-off-by: Krishna Manikandan <mkri...@codeaurora.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 6f0f545..899f28d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -31,6 +31,8 @@
#define INTF_TEST_CTL 0x054
#define INTF_TP_COLOR0 0x058
#define INTF_TP_COLOR1 0x05C
+#define INTF_CONFIG2 0x060
+#define INTF_DISPLAY_DATA_HCTL 0x064
#define INTF_FRAME_LINE_COUNT_EN 0x0A8
#define INTF_FRAME_COUNT 0x0AC
#define INTF_LINE_COUNT 0x0B0
@@ -93,7 +95,7 @@ static void dpu_hw_intf_setup_timing_engine(struct
dpu_hw_intf *ctx,
u32 active_hctl, display_hctl, hsync_ctl;
u32 polarity_ctl, den_polarity, hsync_polarity, vsync_polarity;
u32 panel_format;
- u32 intf_cfg;
+ u32 intf_cfg, intf_cfg2 = 0, display_data_hctl = 0;
/* read interface_cfg */
intf_cfg = DPU_REG_READ(c, INTF_CONFIG);
@@ -178,6 +180,13 @@ static void dpu_hw_intf_setup_timing_engine(struct
dpu_hw_intf *ctx,
(COLOR_8BIT << 4) |
(0x21 << 8));
+ if (ctx->cap->features & BIT(DPU_DATA_HCTL_EN)) {
+ intf_cfg2 |= BIT(4);
+ display_data_hctl = display_hctl;
+ DPU_REG_WRITE(c, INTF_CONFIG2, intf_cfg2);
+ DPU_REG_WRITE(c, INTF_DISPLAY_DATA_HCTL, display_data_hctl);
+ }
+
DPU_REG_WRITE(c, INTF_HSYNC_CTL, hsync_ctl);
DPU_REG_WRITE(c, INTF_VSYNC_PERIOD_F0, vsync_period * hsync_period);
DPU_REG_WRITE(c, INTF_VSYNC_PULSE_WIDTH_F0,
--
2.7.4
