The host driver should decide whether to use SGLs or PRPs and they currently assume the flags are cleared after the call to nvme_setup_cmd(). However, passed-through commands may erroneously set these bits; so clear them for all cases.
Signed-off-by: Logan Gunthorpe <log...@deltatee.com> Reviewed-by: Sagi Grimberg <s...@grimberg.me> --- drivers/nvme/host/core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 1d7c7afb1348..6f80bd78eba6 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -593,6 +593,14 @@ static void nvme_assign_write_stream(struct nvme_ctrl *ctrl, req->q->write_hints[streamid] += blk_rq_bytes(req) >> 9; } +static void nvme_setup_passthrough(struct request *req, + struct nvme_command *cmd) +{ + memcpy(cmd, nvme_req(req)->cmd, sizeof(*cmd)); + /* passthru commands should let the driver set the SGL flags */ + cmd->common.flags &= ~NVME_CMD_SGL_ALL; +} + static inline void nvme_setup_flush(struct nvme_ns *ns, struct nvme_command *cmnd) { @@ -758,7 +766,7 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req, switch (req_op(req)) { case REQ_OP_DRV_IN: case REQ_OP_DRV_OUT: - memcpy(cmd, nvme_req(req)->cmd, sizeof(*cmd)); + nvme_setup_passthrough(req, cmd); break; case REQ_OP_FLUSH: nvme_setup_flush(ns, cmd); -- 2.20.1