Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.
The driver was only compile tested. The risk is quite small as no
current PXA platform I'm aware of is using smc911x driver.
Signed-off-by: Robert Jarzmik
Tested-by: Fabio Estevam
---
Since v1: added Fabio's Tested-by
---
drivers/net/ethernet/smsc/smc911x.c | 85 -
drivers/net/ethernet/smsc/smc911x.h | 63 ---
2 files changed, 82 insertions(+), 66 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc911x.c
b/drivers/net/ethernet/smsc/smc911x.c
index bd64eb982e52..3f5711061432 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -73,6 +73,9 @@ static const char version[] =
#include
#include
+#include
+#include
+
#include
#include "smc911x.h"
@@ -1174,18 +1177,16 @@ static irqreturn_t smc911x_interrupt(int irq, void
*dev_id)
#ifdef SMC_USE_DMA
static void
-smc911x_tx_dma_irq(int dma, void *data)
+smc911x_tx_dma_irq(void *data)
{
- struct net_device *dev = (struct net_device *)data;
- struct smc911x_local *lp = netdev_priv(dev);
+ struct smc911x_local *lp = data;
+ struct net_device *dev = lp->netdev;
struct sk_buff *skb = lp->current_tx_skb;
unsigned long flags;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n");
- /* Clear the DMA interrupt sources */
- SMC_DMA_ACK_IRQ(dev, dma);
BUG_ON(skb == NULL);
dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE);
dev->trans_start = jiffies;
@@ -1208,18 +1209,16 @@ smc911x_tx_dma_irq(int dma, void *data)
"TX DMA irq completed\n");
}
static void
-smc911x_rx_dma_irq(int dma, void *data)
+smc911x_rx_dma_irq(void *data)
{
- struct net_device *dev = (struct net_device *)data;
- struct smc911x_local *lp = netdev_priv(dev);
+ struct smc911x_local *lp = data;
+ struct net_device *dev = lp->netdev;
struct sk_buff *skb = lp->current_rx_skb;
unsigned long flags;
unsigned int pkts;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n");
- /* Clear the DMA interrupt sources */
- SMC_DMA_ACK_IRQ(dev, dma);
dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
BUG_ON(skb == NULL);
lp->current_rx_skb = NULL;
@@ -1792,6 +1791,9 @@ static int smc911x_probe(struct net_device *dev)
unsigned int val, chip_id, revision;
const char *version_string;
unsigned long irq_flags;
+ struct dma_slave_config config;
+ dma_cap_mask_t mask;
+ struct pxad_param param;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
@@ -1963,11 +1965,40 @@ static int smc911x_probe(struct net_device *dev)
goto err_out;
#ifdef SMC_USE_DMA
- lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
- lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ param.prio = PXAD_PRIO_LOWEST;
+ param.drcmr = -1UL;
+
+ lp->rxdma =
+ dma_request_slave_channel_compat(mask, pxad_filter_fn,
+¶m, &dev->dev, "rx");
+ lp->txdma =
+ dma_request_slave_channel_compat(mask, pxad_filter_fn,
+¶m, &dev->dev, "tx");
lp->rxdma_active = 0;
lp->txdma_active = 0;
- dev->dma = lp->rxdma;
+
+ memset(&config, 0, sizeof(config));
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.src_addr = lp->physaddr + RX_DATA_FIFO;
+ config.dst_addr = lp->physaddr + TX_DATA_FIFO;
+ config.src_maxburst = 32;
+ config.dst_maxburst = 32;
+ retval = dmaengine_slave_config(lp->rxdma, &config);
+ if (retval) {
+ dev_err(lp->dev, "dma rx channel configuration failed: %d\n",
+ retval);
+ goto err_out;
+ }
+ retval = dmaengine_slave_config(lp->txdma, &config);
+ if (retval) {
+ dev_err(lp->dev, "dma tx channel configuration failed: %d\n",
+ retval);
+ goto err_out;
+ }
#endif
retval = register_netdev(dev);
@@ -1978,11 +2009,11 @@ static int smc911x_probe(struct net_device *dev)
dev->base_addr, dev->irq);
#ifdef SMC_USE_DMA
- if (lp->rxdma != -1)
- pr_cont(" RXDMA %d", lp->rxdma);
+ if (lp->rxdma)
+ pr_cont(" RXDMA %p", lp->rxdma);
- if (lp->txdma != -1)
- pr_cont(" TXDMA %d", l
