RE: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
> From: Pali Rohár, Sent: Tuesday, February 2, 2021 12:12 AM > On Tuesday 26 January 2021 10:06:06 Pali Rohár wrote: > > On Tuesday 26 January 2021 04:27:37 Yoshihiro Shimoda wrote: > > > Hi Pali, > > > > > I can see the benefit in this. > > > > > In the xhci-plat case usb_create_hcd and usb_add_hcd are separate > > > > > steps, and > > > > > we could both copy the xhci_plat_priv .quirks and run the .init_qurks > > > > > before > > > > > adding the hcd. > > > > > I guess the current way is inherited from pci case where the earliest > > > > > place > > > > > to do this after hcd is created is the hcd->driver->reset callback > > > > > (which is > > > > > set to xhci_pci_setup() or xhci_plat_setup()). > > > > > > > > > > xhci-rcar.c is using the .init_quirk to load firmware, we need to > > > > > check with > > > > > them if this change is ok. (added Yoshihiro Shimoda to cc) > > > > > > > > Yoshihiro, is this change OK? > > > > > > > > Can we move forward? I really need to now how to handle regression in > > > > xhci-mvebu driver. And one option is with this patch... > > > > > > Thank you for asking me about this topic. I tested the patch, but > > > unfortunately, > > > this patch is possible to break a rcar platform because a phy > > > initialization is > > > needed before the firmware loading if the platform uses the phy. (Note > > > that > > > upstream code (salvator-common.dtsi) doesn't use the phy for xhci. But, > > > if we use the phy on other board with this patch, the xhci will not work.) > > > > > > So, I think we need to add a new function pointer for your case. > > > > Ok, thank you for testing! I will try to come up with other solution to > > mentioned mvebu-xhci issue. > > Hello! New version of this patch is in following thread, please review it: > "[PATCH v2] usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" Thanks! I'll review it. Best regards, Yoshihiro Shimoda
Re: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On Tuesday 26 January 2021 10:06:06 Pali Rohár wrote: > On Tuesday 26 January 2021 04:27:37 Yoshihiro Shimoda wrote: > > Hi Pali, > > > > I can see the benefit in this. > > > > In the xhci-plat case usb_create_hcd and usb_add_hcd are separate > > > > steps, and > > > > we could both copy the xhci_plat_priv .quirks and run the .init_qurks > > > > before > > > > adding the hcd. > > > > I guess the current way is inherited from pci case where the earliest > > > > place > > > > to do this after hcd is created is the hcd->driver->reset callback > > > > (which is > > > > set to xhci_pci_setup() or xhci_plat_setup()). > > > > > > > > xhci-rcar.c is using the .init_quirk to load firmware, we need to check > > > > with > > > > them if this change is ok. (added Yoshihiro Shimoda to cc) > > > > > > Yoshihiro, is this change OK? > > > > > > Can we move forward? I really need to now how to handle regression in > > > xhci-mvebu driver. And one option is with this patch... > > > > Thank you for asking me about this topic. I tested the patch, but > > unfortunately, > > this patch is possible to break a rcar platform because a phy > > initialization is > > needed before the firmware loading if the platform uses the phy. (Note that > > upstream code (salvator-common.dtsi) doesn't use the phy for xhci. But, > > if we use the phy on other board with this patch, the xhci will not work.) > > > > So, I think we need to add a new function pointer for your case. > > Ok, thank you for testing! I will try to come up with other solution to > mentioned mvebu-xhci issue. Hello! New version of this patch is in following thread, please review it: "[PATCH v2] usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" https://lore.kernel.org/linux-usb/20210201150803.7305-1-p...@kernel.org/ > > Best regards, > > Yoshihiro Shimoda > > > > > > Their firmware would be loaded before phy parts are initialized, usb bus > > > > registered, or roothub device allocated. > > > > > > > > Thanks > > > > -Mathias
Re: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On Tuesday 26 January 2021 04:27:37 Yoshihiro Shimoda wrote:
> Hi Pali,
>
> > From: Pali Rohár, Sent: Monday, January 25, 2021 11:20 PM
> > On Friday 15 January 2021 15:32:30 Mathias Nyman wrote:
> > > On 14.1.2021 1.20, Pali Rohár wrote:
> > > > On Thursday 24 December 2020 05:59:05 Peter Chen wrote:
> > > >> On 20-12-23 17:18:47, Pali Rohár wrote:
> > > >>> Currently init_quirk callbacks for xhci platform drivers are called
> > > >>> xhci_plat_setup() function which is called after chip reset completes.
> > > >>> It happens in the middle of the usb_add_hcd() function.
> > > >>>
> > > >>> But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe()
> > > >>> function
> > > >>> prior calling usb_add_hcd() function. Therefore this
> > > >>> XHCI_SKIP_PHY_INIT
> > > >>> currently does nothing as prior xhci_plat_setup() it is not set.
> > > >>>
> > > >>> Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization
> > > >>> value
> > > >>> which really needs to be set prior calling usb_add_hcd() as this
> > > >>> function
> > > >>> at its beginning skips PHY init if this member is set.
> > > >>>
> > > >>> This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by
> > > >>> calling
> > > >>> init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> > > >>> XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
> > > >>> priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
> > > >>>
> > > >>> Signed-off-by: Pali Rohár
> > > >>>
> > > >>> ---
> > > >>> Changes in v2:
> > > >>> * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are
> > > >>> setting xhci->quirks
> > > >>> * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for
> > > >>> Armada 3720" patch
> > > >>> * Removed Fixes: line
> > > >>> ---
> > > >>> drivers/usb/host/xhci-plat.c | 16
> > > >>> 1 file changed, 8 insertions(+), 8 deletions(-)
> > > >>>
> > > >>> diff --git a/drivers/usb/host/xhci-plat.c
> > > >>> b/drivers/usb/host/xhci-plat.c
> > > >>> index 4d34f6005381..0eab7cb5a767 100644
> > > >>> --- a/drivers/usb/host/xhci-plat.c
> > > >>> +++ b/drivers/usb/host/xhci-plat.c
> > > >>> @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev,
> > > >>> struct xhci_hcd *xhci)
> > > >>> /* called during probe() after chip reset completes */
> > > >>> static int xhci_plat_setup(struct usb_hcd *hcd)
> > > >>> {
> > > >>> - int ret;
> > > >>> -
> > > >>> -
> > > >>> - ret = xhci_priv_init_quirk(hcd);
> > > >>> - if (ret)
> > > >>> - return ret;
> > > >>> -
> > > >>> return xhci_gen_setup(hcd, xhci_plat_quirks);
> > > >>> }
> > > >>>
> > > >>> @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct
> > > >>> platform_device *pdev)
> > > >>>
> > > >>> hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> > > >>> xhci->shared_hcd->tpl_support = hcd->tpl_support;
> > > >>> - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> > > >>> +
> > > >>> + if (priv) {
> > > >>> + ret = xhci_priv_init_quirk(hcd);
> > > >>> + if (ret)
> > > >>> + goto disable_usb_phy;
> > > >>> + }
> > > >>> +
> > > >>> + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv &&
> > > >>> (priv->quirks & XHCI_SKIP_PHY_INIT)))
> > > >>> hcd->skip_phy_initialization = 1;
> > > >>
> > > >> I am not sure if others agree with you move the position of
> > > >> xhci_priv_init_quirk, Let's see Mathias opinion.
> > > >
> > > > Hello! Do you have an opinion how to handle this issue? As currently it
> > > > is needed for another patch which is fixing issue/regression in
> > > > xhci-mvebu:
> > > >
>
> > > >
> > >
> > > I can see the benefit in this.
> > > In the xhci-plat case usb_create_hcd and usb_add_hcd are separate steps,
> > > and
> > > we could both copy the xhci_plat_priv .quirks and run the .init_qurks
> > > before
> > > adding the hcd.
> > > I guess the current way is inherited from pci case where the earliest
> > > place
> > > to do this after hcd is created is the hcd->driver->reset callback (which
> > > is
> > > set to xhci_pci_setup() or xhci_plat_setup()).
> > >
> > > xhci-rcar.c is using the .init_quirk to load firmware, we need to check
> > > with
> > > them if this change is ok. (added Yoshihiro Shimoda to cc)
> >
> > Yoshihiro, is this change OK?
> >
> > Can we move forward? I really need to now how to handle regression in
> > xhci-mvebu driver. And one option is with this patch...
>
> Thank you for asking me about this topic. I tested the patch, but
> unfortunately,
> this patch is possible to break a rcar platform because a phy initialization
> is
> needed before the firmware loading if the platform uses the phy. (Note that
> upstream code (salvator-common.dtsi) doesn't use the phy for xhci. But,
> if we use the phy on other board with this patch, the xhci will not work.)
>
> So, I think we need to add a new function pointer for your
RE: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
Hi Pali,
> From: Pali Rohár, Sent: Monday, January 25, 2021 11:20 PM
> On Friday 15 January 2021 15:32:30 Mathias Nyman wrote:
> > On 14.1.2021 1.20, Pali Rohár wrote:
> > > On Thursday 24 December 2020 05:59:05 Peter Chen wrote:
> > >> On 20-12-23 17:18:47, Pali Rohár wrote:
> > >>> Currently init_quirk callbacks for xhci platform drivers are called
> > >>> xhci_plat_setup() function which is called after chip reset completes.
> > >>> It happens in the middle of the usb_add_hcd() function.
> > >>>
> > >>> But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe()
> > >>> function
> > >>> prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
> > >>> currently does nothing as prior xhci_plat_setup() it is not set.
> > >>>
> > >>> Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization
> > >>> value
> > >>> which really needs to be set prior calling usb_add_hcd() as this
> > >>> function
> > >>> at its beginning skips PHY init if this member is set.
> > >>>
> > >>> This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by
> > >>> calling
> > >>> init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> > >>> XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
> > >>> priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
> > >>>
> > >>> Signed-off-by: Pali Rohár
> > >>>
> > >>> ---
> > >>> Changes in v2:
> > >>> * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are
> > >>> setting xhci->quirks
> > >>> * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for
> > >>> Armada 3720" patch
> > >>> * Removed Fixes: line
> > >>> ---
> > >>> drivers/usb/host/xhci-plat.c | 16
> > >>> 1 file changed, 8 insertions(+), 8 deletions(-)
> > >>>
> > >>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> > >>> index 4d34f6005381..0eab7cb5a767 100644
> > >>> --- a/drivers/usb/host/xhci-plat.c
> > >>> +++ b/drivers/usb/host/xhci-plat.c
> > >>> @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev,
> > >>> struct xhci_hcd *xhci)
> > >>> /* called during probe() after chip reset completes */
> > >>> static int xhci_plat_setup(struct usb_hcd *hcd)
> > >>> {
> > >>> - int ret;
> > >>> -
> > >>> -
> > >>> - ret = xhci_priv_init_quirk(hcd);
> > >>> - if (ret)
> > >>> - return ret;
> > >>> -
> > >>> return xhci_gen_setup(hcd, xhci_plat_quirks);
> > >>> }
> > >>>
> > >>> @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device
> > >>> *pdev)
> > >>>
> > >>> hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> > >>> xhci->shared_hcd->tpl_support = hcd->tpl_support;
> > >>> - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> > >>> +
> > >>> + if (priv) {
> > >>> + ret = xhci_priv_init_quirk(hcd);
> > >>> + if (ret)
> > >>> + goto disable_usb_phy;
> > >>> + }
> > >>> +
> > >>> + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv &&
> > >>> (priv->quirks & XHCI_SKIP_PHY_INIT)))
> > >>> hcd->skip_phy_initialization = 1;
> > >>
> > >> I am not sure if others agree with you move the position of
> > >> xhci_priv_init_quirk, Let's see Mathias opinion.
> > >
> > > Hello! Do you have an opinion how to handle this issue? As currently it
> > > is needed for another patch which is fixing issue/regression in
> > > xhci-mvebu:
> > >
> > >
> >
> > I can see the benefit in this.
> > In the xhci-plat case usb_create_hcd and usb_add_hcd are separate steps, and
> > we could both copy the xhci_plat_priv .quirks and run the .init_qurks before
> > adding the hcd.
> > I guess the current way is inherited from pci case where the earliest place
> > to do this after hcd is created is the hcd->driver->reset callback (which is
> > set to xhci_pci_setup() or xhci_plat_setup()).
> >
> > xhci-rcar.c is using the .init_quirk to load firmware, we need to check with
> > them if this change is ok. (added Yoshihiro Shimoda to cc)
>
> Yoshihiro, is this change OK?
>
> Can we move forward? I really need to now how to handle regression in
> xhci-mvebu driver. And one option is with this patch...
Thank you for asking me about this topic. I tested the patch, but unfortunately,
this patch is possible to break a rcar platform because a phy initialization is
needed before the firmware loading if the platform uses the phy. (Note that
upstream code (salvator-common.dtsi) doesn't use the phy for xhci. But,
if we use the phy on other board with this patch, the xhci will not work.)
So, I think we need to add a new function pointer for your case.
Best regards,
Yoshihiro Shimoda
> > Their firmware would be loaded before phy parts are initialized, usb bus
> > registered, or roothub device allocated.
> >
> > Thanks
> > -Mathias
Re: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On Friday 15 January 2021 15:32:30 Mathias Nyman wrote:
> On 14.1.2021 1.20, Pali Rohár wrote:
> > On Thursday 24 December 2020 05:59:05 Peter Chen wrote:
> >> On 20-12-23 17:18:47, Pali Rohár wrote:
> >>> Currently init_quirk callbacks for xhci platform drivers are called
> >>> xhci_plat_setup() function which is called after chip reset completes.
> >>> It happens in the middle of the usb_add_hcd() function.
> >>>
> >>> But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
> >>> prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
> >>> currently does nothing as prior xhci_plat_setup() it is not set.
> >>>
> >>> Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization
> >>> value
> >>> which really needs to be set prior calling usb_add_hcd() as this function
> >>> at its beginning skips PHY init if this member is set.
> >>>
> >>> This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
> >>> init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> >>> XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
> >>> priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
> >>>
> >>> Signed-off-by: Pali Rohár
> >>>
> >>> ---
> >>> Changes in v2:
> >>> * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting
> >>> xhci->quirks
> >>> * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for
> >>> Armada 3720" patch
> >>> * Removed Fixes: line
> >>> ---
> >>> drivers/usb/host/xhci-plat.c | 16
> >>> 1 file changed, 8 insertions(+), 8 deletions(-)
> >>>
> >>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> >>> index 4d34f6005381..0eab7cb5a767 100644
> >>> --- a/drivers/usb/host/xhci-plat.c
> >>> +++ b/drivers/usb/host/xhci-plat.c
> >>> @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev,
> >>> struct xhci_hcd *xhci)
> >>> /* called during probe() after chip reset completes */
> >>> static int xhci_plat_setup(struct usb_hcd *hcd)
> >>> {
> >>> - int ret;
> >>> -
> >>> -
> >>> - ret = xhci_priv_init_quirk(hcd);
> >>> - if (ret)
> >>> - return ret;
> >>> -
> >>> return xhci_gen_setup(hcd, xhci_plat_quirks);
> >>> }
> >>>
> >>> @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device
> >>> *pdev)
> >>>
> >>> hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> >>> xhci->shared_hcd->tpl_support = hcd->tpl_support;
> >>> - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> >>> +
> >>> + if (priv) {
> >>> + ret = xhci_priv_init_quirk(hcd);
> >>> + if (ret)
> >>> + goto disable_usb_phy;
> >>> + }
> >>> +
> >>> + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks &
> >>> XHCI_SKIP_PHY_INIT)))
> >>> hcd->skip_phy_initialization = 1;
> >>
> >> I am not sure if others agree with you move the position of
> >> xhci_priv_init_quirk, Let's see Mathias opinion.
> >
> > Hello! Do you have an opinion how to handle this issue? As currently it
> > is needed for another patch which is fixing issue/regression in xhci-mvebu:
> > https://lore.kernel.org/linux-usb/20201223162403.10897-1-p...@kernel.org/
> >
>
> I can see the benefit in this.
> In the xhci-plat case usb_create_hcd and usb_add_hcd are separate steps, and
> we could both copy the xhci_plat_priv .quirks and run the .init_qurks before
> adding the hcd.
> I guess the current way is inherited from pci case where the earliest place
> to do this after hcd is created is the hcd->driver->reset callback (which is
> set to xhci_pci_setup() or xhci_plat_setup()).
>
> xhci-rcar.c is using the .init_quirk to load firmware, we need to check with
> them if this change is ok. (added Yoshihiro Shimoda to cc)
Yoshihiro, is this change OK?
Can we move forward? I really need to now how to handle regression in
xhci-mvebu driver. And one option is with this patch...
> Their firmware would be loaded before phy parts are initialized, usb bus
> registered, or roothub device allocated.
>
> Thanks
> -Mathias
Re: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On 14.1.2021 1.20, Pali Rohár wrote:
> On Thursday 24 December 2020 05:59:05 Peter Chen wrote:
>> On 20-12-23 17:18:47, Pali Rohár wrote:
>>> Currently init_quirk callbacks for xhci platform drivers are called
>>> xhci_plat_setup() function which is called after chip reset completes.
>>> It happens in the middle of the usb_add_hcd() function.
>>>
>>> But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
>>> prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
>>> currently does nothing as prior xhci_plat_setup() it is not set.
>>>
>>> Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization value
>>> which really needs to be set prior calling usb_add_hcd() as this function
>>> at its beginning skips PHY init if this member is set.
>>>
>>> This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
>>> init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
>>> XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
>>> priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
>>>
>>> Signed-off-by: Pali Rohár
>>>
>>> ---
>>> Changes in v2:
>>> * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting
>>> xhci->quirks
>>> * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
>>> 3720" patch
>>> * Removed Fixes: line
>>> ---
>>> drivers/usb/host/xhci-plat.c | 16
>>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>>> index 4d34f6005381..0eab7cb5a767 100644
>>> --- a/drivers/usb/host/xhci-plat.c
>>> +++ b/drivers/usb/host/xhci-plat.c
>>> @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev, struct
>>> xhci_hcd *xhci)
>>> /* called during probe() after chip reset completes */
>>> static int xhci_plat_setup(struct usb_hcd *hcd)
>>> {
>>> - int ret;
>>> -
>>> -
>>> - ret = xhci_priv_init_quirk(hcd);
>>> - if (ret)
>>> - return ret;
>>> -
>>> return xhci_gen_setup(hcd, xhci_plat_quirks);
>>> }
>>>
>>> @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device
>>> *pdev)
>>>
>>> hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
>>> xhci->shared_hcd->tpl_support = hcd->tpl_support;
>>> - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
>>> +
>>> + if (priv) {
>>> + ret = xhci_priv_init_quirk(hcd);
>>> + if (ret)
>>> + goto disable_usb_phy;
>>> + }
>>> +
>>> + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks &
>>> XHCI_SKIP_PHY_INIT)))
>>> hcd->skip_phy_initialization = 1;
>>
>> I am not sure if others agree with you move the position of
>> xhci_priv_init_quirk, Let's see Mathias opinion.
>
> Hello! Do you have an opinion how to handle this issue? As currently it
> is needed for another patch which is fixing issue/regression in xhci-mvebu:
> https://lore.kernel.org/linux-usb/20201223162403.10897-1-p...@kernel.org/
>
I can see the benefit in this.
In the xhci-plat case usb_create_hcd and usb_add_hcd are separate steps, and
we could both copy the xhci_plat_priv .quirks and run the .init_qurks before
adding the hcd.
I guess the current way is inherited from pci case where the earliest place
to do this after hcd is created is the hcd->driver->reset callback (which is
set to xhci_pci_setup() or xhci_plat_setup()).
xhci-rcar.c is using the .init_quirk to load firmware, we need to check with
them if this change is ok. (added Yoshihiro Shimoda to cc)
Their firmware would be loaded before phy parts are initialized, usb bus
registered, or roothub device allocated.
Thanks
-Mathias
Re: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On Thursday 24 December 2020 05:59:05 Peter Chen wrote:
> On 20-12-23 17:18:47, Pali Rohár wrote:
> > Currently init_quirk callbacks for xhci platform drivers are called
> > xhci_plat_setup() function which is called after chip reset completes.
> > It happens in the middle of the usb_add_hcd() function.
> >
> > But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
> > prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
> > currently does nothing as prior xhci_plat_setup() it is not set.
> >
> > Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization value
> > which really needs to be set prior calling usb_add_hcd() as this function
> > at its beginning skips PHY init if this member is set.
> >
> > This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
> > init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> > XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
> > priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
> >
> > Signed-off-by: Pali Rohár
> >
> > ---
> > Changes in v2:
> > * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting
> > xhci->quirks
> > * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
> > 3720" patch
> > * Removed Fixes: line
> > ---
> > drivers/usb/host/xhci-plat.c | 16
> > 1 file changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> > index 4d34f6005381..0eab7cb5a767 100644
> > --- a/drivers/usb/host/xhci-plat.c
> > +++ b/drivers/usb/host/xhci-plat.c
> > @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev, struct
> > xhci_hcd *xhci)
> > /* called during probe() after chip reset completes */
> > static int xhci_plat_setup(struct usb_hcd *hcd)
> > {
> > - int ret;
> > -
> > -
> > - ret = xhci_priv_init_quirk(hcd);
> > - if (ret)
> > - return ret;
> > -
> > return xhci_gen_setup(hcd, xhci_plat_quirks);
> > }
> >
> > @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device
> > *pdev)
> >
> > hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> > xhci->shared_hcd->tpl_support = hcd->tpl_support;
> > - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> > +
> > + if (priv) {
> > + ret = xhci_priv_init_quirk(hcd);
> > + if (ret)
> > + goto disable_usb_phy;
> > + }
> > +
> > + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks &
> > XHCI_SKIP_PHY_INIT)))
> > hcd->skip_phy_initialization = 1;
>
> I am not sure if others agree with you move the position of
> xhci_priv_init_quirk, Let's see Mathias opinion.
Hello! Do you have an opinion how to handle this issue? As currently it
is needed for another patch which is fixing issue/regression in xhci-mvebu:
https://lore.kernel.org/linux-usb/20201223162403.10897-1-p...@kernel.org/
Re: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
On 20-12-23 17:18:47, Pali Rohár wrote:
> Currently init_quirk callbacks for xhci platform drivers are called
> xhci_plat_setup() function which is called after chip reset completes.
> It happens in the middle of the usb_add_hcd() function.
>
> But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
> prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
> currently does nothing as prior xhci_plat_setup() it is not set.
>
> Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization value
> which really needs to be set prior calling usb_add_hcd() as this function
> at its beginning skips PHY init if this member is set.
>
> This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
> init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
> priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
>
> Signed-off-by: Pali Rohár
>
> ---
> Changes in v2:
> * Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting
> xhci->quirks
> * Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
> 3720" patch
> * Removed Fixes: line
> ---
> drivers/usb/host/xhci-plat.c | 16
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 4d34f6005381..0eab7cb5a767 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev, struct
> xhci_hcd *xhci)
> /* called during probe() after chip reset completes */
> static int xhci_plat_setup(struct usb_hcd *hcd)
> {
> - int ret;
> -
> -
> - ret = xhci_priv_init_quirk(hcd);
> - if (ret)
> - return ret;
> -
> return xhci_gen_setup(hcd, xhci_plat_quirks);
> }
>
> @@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
>
> hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> xhci->shared_hcd->tpl_support = hcd->tpl_support;
> - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> +
> + if (priv) {
> + ret = xhci_priv_init_quirk(hcd);
> + if (ret)
> + goto disable_usb_phy;
> + }
> +
> + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks &
> XHCI_SKIP_PHY_INIT)))
> hcd->skip_phy_initialization = 1;
I am not sure if others agree with you move the position of
xhci_priv_init_quirk, Let's see Mathias opinion.
--
Thanks,
Peter Chen
[PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
Currently init_quirk callbacks for xhci platform drivers are called
xhci_plat_setup() function which is called after chip reset completes.
It happens in the middle of the usb_add_hcd() function.
But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
currently does nothing as prior xhci_plat_setup() it is not set.
Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization value
which really needs to be set prior calling usb_add_hcd() as this function
at its beginning skips PHY init if this member is set.
This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.
Signed-off-by: Pali Rohár
---
Changes in v2:
* Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting
xhci->quirks
* Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
3720" patch
* Removed Fixes: line
---
drivers/usb/host/xhci-plat.c | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 4d34f6005381..0eab7cb5a767 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev, struct
xhci_hcd *xhci)
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
- int ret;
-
-
- ret = xhci_priv_init_quirk(hcd);
- if (ret)
- return ret;
-
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
@@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
xhci->shared_hcd->tpl_support = hcd->tpl_support;
- if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
+
+ if (priv) {
+ ret = xhci_priv_init_quirk(hcd);
+ if (ret)
+ goto disable_usb_phy;
+ }
+
+ if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks &
XHCI_SKIP_PHY_INIT)))
hcd->skip_phy_initialization = 1;
if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
--
2.20.1
