Add function for remapping a ChipIO stream's ports. Also include some
documentation as to how this works.

Signed-off-by: Connor McAdams <conmanx...@gmail.com>
---
 sound/pci/hda/patch_ca0132.c | 208 ++++++++++++++++++++++++++---------
 1 file changed, 156 insertions(+), 52 deletions(-)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 7ce4a966b733..8d2f12f2ce3f 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -788,6 +788,40 @@ static const struct ae5_filter_set ae5_filter_presets[] = {
        }
 };
 
+/*
+ * Data structures for storing audio router remapping data. These are used to
+ * remap a currently active streams ports.
+ */
+struct chipio_stream_remap_data {
+       unsigned int stream_id;
+       unsigned int count;
+
+       unsigned int offset[16];
+       unsigned int value[16];
+};
+
+static const struct chipio_stream_remap_data stream_remap_data[] = {
+       { .stream_id = 0x14,
+         .count     = 0x04,
+         .offset    = { 0x00, 0x04, 0x08, 0x0c },
+         .value     = { 0x0001f8c0, 0x0001f9c1, 0x0001fac6, 0x0001fbc7 },
+       },
+       { .stream_id = 0x0c,
+         .count     = 0x0c,
+         .offset    = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c,
+                        0x20, 0x24, 0x28, 0x2c },
+         .value     = { 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3,
+                        0x0001e2c4, 0x0001e3c5, 0x0001e8c6, 0x0001e9c7,
+                        0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb },
+       },
+       { .stream_id = 0x0c,
+         .count     = 0x08,
+         .offset    = { 0x08, 0x0c, 0x10, 0x14, 0x20, 0x24, 0x28, 0x2c },
+         .value     = { 0x000140c2, 0x000141c3, 0x000150c4, 0x000151c5,
+                        0x000142c8, 0x000143c9, 0x000152ca, 0x000153cb },
+       }
+};
+
 enum hda_cmd_vendor_io {
        /* for DspIO node */
        VENDOR_DSPIO_SCP_WRITE_DATA_LOW      = 0x000,
@@ -7423,6 +7457,104 @@ static void ca0132_refresh_widget_caps(struct hda_codec 
*codec)
        }
 }
 
+/*
+ * The region of ChipIO memory from 0x190000-0x1903fc is a sort of 'audio
+ * router', where each entry represents a 48khz audio channel, with a format
+ * of an 8-bit destination, an 8-bit source, and an unknown 2-bit number
+ * value. The 2-bit number value is seemingly 0 if inactive, 1 if active,
+ * and 3 if it's using Sample Rate Converter ports.
+ * An example is:
+ * 0x0001f8c0
+ * In this case, f8 is the destination, and c0 is the source. The number value
+ * is 1.
+ * This region of memory is normally managed internally by the 8051, where
+ * the region of exram memory from 0x1477-0x1575 has each byte represent an
+ * entry within the 0x190000 range, and when a range of entries is in use, the
+ * ending value is overwritten with 0xff.
+ * 0x1578 in exram is a table of 0x25 entries, corresponding to the ChipIO
+ * streamID's, where each entry is a starting 0x190000 port offset.
+ * 0x159d in exram is the same as 0x1578, except it contains the ending port
+ * offset for the corresponding streamID.
+ *
+ * On certain cards, such as the SBZ/ZxR/AE7, these are originally setup by
+ * the 8051, then manually overwritten to remap the ports to work with the
+ * new DACs.
+ *
+ * Currently known portID's:
+ * 0x00-0x1f: HDA audio stream input/output ports.
+ * 0x80-0xbf: Sample rate converter input/outputs. Only valid ports seem to
+ *            have the lower-nibble set to 0x1, 0x2, and 0x9.
+ * 0xc0-0xdf: DSP DMA input/output ports. Dynamically assigned.
+ * 0xe0-0xff: DAC/ADC audio input/output ports.
+ *
+ * Currently known streamID's:
+ * 0x03: Mic1 ADC to DSP.
+ * 0x04: Mic2 ADC to DSP.
+ * 0x05: HDA node 0x02 audio stream to DSP.
+ * 0x0f: DSP Mic exit to HDA node 0x07.
+ * 0x0c: DSP processed audio to DACs.
+ * 0x14: DAC0, front L/R.
+ *
+ * It is possible to route the HDA audio streams directly to the DAC and
+ * bypass the DSP entirely, with the only downside being that since the DSP
+ * does volume control, the only volume control you'll get is through PCM on
+ * the PC side, in the same way volume is handled for optical out. This may be
+ * useful for debugging.
+ */
+static void chipio_remap_stream(struct hda_codec *codec,
+               const struct chipio_stream_remap_data *remap_data)
+{
+       unsigned int i, stream_offset, tmp;
+
+       /* Get the starting port for the stream to be remapped. */
+       tmp = 0x1578 + remap_data->stream_id;
+       for (i = 0; i < 2; i++) {
+               snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
+                                   VENDOR_CHIPIO_8051_ADDRESS_LOW + i,
+                                   ((tmp >> (i * 8)) & 0xff));
+       }
+
+       stream_offset = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
+                                  VENDOR_CHIPIO_8051_DATA_READ, 0);
+
+       /*
+        * Check if the stream's port value is 0xff, because the 8051 may not
+        * have gotten around to setting up the stream yet. Wait until it's
+        * setup to remap it's ports.
+        */
+       if (stream_offset == 0xff) {
+               for (i = 0; i < 5; i++) {
+                       msleep(25);
+
+                       stream_offset = snd_hda_codec_read(codec,
+                                       WIDGET_CHIP_CTRL, 0,
+                                       VENDOR_CHIPIO_8051_DATA_READ, 0);
+
+                       if (stream_offset != 0xff)
+                               break;
+               }
+       }
+
+       if (stream_offset == 0xff) {
+               codec_info(codec, "%s: Stream 0x%02x ports aren't allocated, 
remap failed!\n",
+                               __func__, remap_data->stream_id);
+               return;
+       }
+
+       /* Offset isn't in bytes, its in 32-bit words, so multiply it by 4. */
+       stream_offset *= 0x04;
+       stream_offset += 0x190000;
+
+       for (i = 0; i < remap_data->count; i++) {
+               chipio_write_no_mutex(codec,
+                               stream_offset + remap_data->offset[i],
+                               remap_data->value[i]);
+       }
+
+       /* Update stream map configuration. */
+       chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+}
+
 /*
  * Default speaker tuning values setup for alternative codecs.
  */
@@ -7570,46 +7702,35 @@ static void sbz_connect_streams(struct hda_codec *codec)
  */
 static void sbz_chipio_startup_data(struct hda_codec *codec)
 {
+       const struct chipio_stream_remap_data *dsp_out_remap_data;
        struct ca0132_spec *spec = codec->spec;
 
        mutex_lock(&spec->chipio_mutex);
        codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n");
 
-       /* These control audio output */
-       chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0);
-       chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1);
-       chipio_write_no_mutex(codec, 0x190068, 0x0001fac6);
-       chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7);
-       /* Signal to update I think */
-       chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+       /* Remap DAC0's output ports. */
+       chipio_remap_stream(codec, &stream_remap_data[0]);
 
-       chipio_set_stream_channels(codec, 0x0C, 6);
-       chipio_set_stream_control(codec, 0x0C, 1);
-       /* No clue what these control */
-       if (ca0132_quirk(spec) == QUIRK_SBZ) {
-               chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0);
-               chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1);
-               chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2);
-               chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3);
-               chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4);
-               chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5);
-               chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6);
-               chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7);
-               chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8);
-               chipio_write_no_mutex(codec, 0x190054, 0x0001edc9);
-               chipio_write_no_mutex(codec, 0x190058, 0x0001eaca);
-               chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb);
-       } else if (ca0132_quirk(spec) == QUIRK_ZXR) {
-               chipio_write_no_mutex(codec, 0x190038, 0x000140c2);
-               chipio_write_no_mutex(codec, 0x19003c, 0x000141c3);
-               chipio_write_no_mutex(codec, 0x190040, 0x000150c4);
-               chipio_write_no_mutex(codec, 0x190044, 0x000151c5);
-               chipio_write_no_mutex(codec, 0x190050, 0x000142c8);
-               chipio_write_no_mutex(codec, 0x190054, 0x000143c9);
-               chipio_write_no_mutex(codec, 0x190058, 0x000152ca);
-               chipio_write_no_mutex(codec, 0x19005c, 0x000153cb);
+       /* Remap DSP audio output stream ports. */
+       switch (ca0132_quirk(spec)) {
+       case QUIRK_SBZ:
+               dsp_out_remap_data = &stream_remap_data[1];
+               break;
+
+       case QUIRK_ZXR:
+               dsp_out_remap_data = &stream_remap_data[2];
+               break;
+
+       default:
+               dsp_out_remap_data = NULL;
+               break;
        }
-       chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+
+       chipio_set_stream_channels(codec, 0x0c, 6);
+       chipio_set_stream_control(codec, 0x0c, 1);
+
+       if (dsp_out_remap_data)
+               chipio_remap_stream(codec, dsp_out_remap_data);
 
        codec_dbg(codec, "Startup Data exited, mutex released.\n");
        mutex_unlock(&spec->chipio_mutex);
@@ -7842,34 +7963,17 @@ static void ae5_post_dsp_startup_data(struct hda_codec 
*codec)
        mutex_unlock(&spec->chipio_mutex);
 }
 
-static const unsigned int ae7_port_set_data[] = {
-       0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3, 0x0001e2c4, 0x0001e3c5,
-       0x0001e8c6, 0x0001e9c7, 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb
-};
-
 static void ae7_post_dsp_setup_ports(struct hda_codec *codec)
 {
        struct ca0132_spec *spec = codec->spec;
-       unsigned int i, count, addr;
 
        mutex_lock(&spec->chipio_mutex);
 
        chipio_set_stream_channels(codec, 0x0c, 6);
        chipio_set_stream_control(codec, 0x0c, 1);
 
-       count = ARRAY_SIZE(ae7_port_set_data);
-       addr = 0x190030;
-       for (i = 0; i < count; i++) {
-               chipio_write_no_mutex(codec, addr, ae7_port_set_data[i]);
-
-               /* Addresses are incremented by 4-bytes. */
-               addr += 0x04;
-       }
-
-       /*
-        * Port setting always ends with a write of 0x1 to address 0x19042c.
-        */
-       chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+       /* Seems to share the same port remapping as the SBZ. */
+       chipio_remap_stream(codec, &stream_remap_data[1]);
 
        ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00);
        ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40);
-- 
2.25.1

Reply via email to