[PATCH v2 5/5] arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements

[Stefan Agner]

According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.

Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial 
device-tree")
Signed-off-by: Stefan Agner 
---
 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi 
b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index 2802ddbb83ac..feb088504740 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -264,7 +264,7 @@ external_phy: ethernet-phy@0 {
max-speed = <1000>;
 
reset-assert-us = <1>;
-   reset-deassert-us = <3>;
+   reset-deassert-us = <8>;
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | 
GPIO_OPEN_DRAIN)>;
 
interrupt-parent = <&gpio_intc>;
-- 
2.29.2

Re: [PATCH v2 5/5] arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements

[Martin Blumenstingl]

On Tue, Dec 1, 2020 at 2:21 PM Stefan Agner  wrote:
>
> According to the datasheet (Rev. 1.9) the RTL8211F requires at least
> 72ms "for internal circuits settling time" before accessing the PHY
> egisters. On similar boards with the same PHY this fixes an issue where
> Ethernet link would not come up when using ip link set down/up.
>
> Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial 
> device-tree")
> Signed-off-by: Stefan Agner 
with the "registers" typo above fixed:
Reviewed-by: Martin Blumenstingl