Re: [PATCH v3 0/7] add support USB for MT8183
Hi Matthias, On Thu, 2020-05-21 at 14:41 +0200, Matthias Brugger wrote: > Hi Chungfeng, > > On 04/09/2019 03:54, Chunfeng Yun wrote: > > Hi Greg, > > > > > > Please don't try to pick up this series, the dependent ones are still > > under public review, I'll fix build warning and send out new version > > after the dependent ones are applied > > Sorry for inconvenience > > > > I think the pmic driver is upstream now and show up in linux-next soon. > > I propose to rebase the series and send it again. Ok, I'll resend this series, thanks a lot > > Regards, > Matthias > > > Thanks > > > > On Fri, 2019-08-30 at 15:40 +0800, Chunfeng Yun wrote: > >> This series support USB DRD controller and enable it's remote > >> wakeup functoin for MT8183, they depend on the following > >> series patches: > >> > >> 1. this series add support MT6358 PMIC > >> [v5,01/10] mfd: mt6397: clean up code > >> https://patchwork.kernel.org/patch/0487/ > >> > >> 2. this series add support pericfg syscon > >> [v2,1/2] dt-bindings: clock: mediatek: add pericfg for MT8183 > >> https://patchwork.kernel.org/patch/8183/ > >> > >> 3. add property mediatek,discth for tphy > >> [06/11] phy: phy-mtk-tphy: add a property for disconnect threshold > >> https://patchwork.kernel.org/patch/0695/ > >> > >> v3 changes: > >> 1. changes micros define > >> 2. remove #reset-cell > >> 3. update dependent series > >> > >> v2 changes: > >> add patch [7/7] > >> > >> Chunfeng Yun (7): > >> dt-bindings: usb: mtu3: support USB wakeup for MT8183 > >> dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183 > >> usb: mtu3: support ip-sleep wakeup for MT8183 > >> usb: mtk-xhci: support ip-sleep wakeup for MT8183 > >> arm64: dts: mt8183: add usb and phy nodes > >> arm64: dts: mt8183: enable USB remote wakeup > >> arm64: dts: mt8183: tune disconnect threshold of u2phy > >> > >> .../bindings/usb/mediatek,mtk-xhci.txt| 1 + > >> .../devicetree/bindings/usb/mediatek,mtu3.txt | 1 + > >> arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++ > >> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +++ > >> drivers/usb/host/xhci-mtk.c | 14 - > >> drivers/usb/mtu3/mtu3_host.c | 14 - > >> 6 files changed, 114 insertions(+), 2 deletions(-) > >> > > > >
Re: [PATCH v3 0/7] add support USB for MT8183
Hi Chungfeng, On 04/09/2019 03:54, Chunfeng Yun wrote: > Hi Greg, > > > Please don't try to pick up this series, the dependent ones are still > under public review, I'll fix build warning and send out new version > after the dependent ones are applied > Sorry for inconvenience > I think the pmic driver is upstream now and show up in linux-next soon. I propose to rebase the series and send it again. Regards, Matthias > Thanks > > On Fri, 2019-08-30 at 15:40 +0800, Chunfeng Yun wrote: >> This series support USB DRD controller and enable it's remote >> wakeup functoin for MT8183, they depend on the following >> series patches: >> >> 1. this series add support MT6358 PMIC >> [v5,01/10] mfd: mt6397: clean up code >> https://patchwork.kernel.org/patch/0487/ >> >> 2. this series add support pericfg syscon >> [v2,1/2] dt-bindings: clock: mediatek: add pericfg for MT8183 >> https://patchwork.kernel.org/patch/8183/ >> >> 3. add property mediatek,discth for tphy >> [06/11] phy: phy-mtk-tphy: add a property for disconnect threshold >> https://patchwork.kernel.org/patch/0695/ >> >> v3 changes: >> 1. changes micros define >> 2. remove #reset-cell >> 3. update dependent series >> >> v2 changes: >> add patch [7/7] >> >> Chunfeng Yun (7): >> dt-bindings: usb: mtu3: support USB wakeup for MT8183 >> dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183 >> usb: mtu3: support ip-sleep wakeup for MT8183 >> usb: mtk-xhci: support ip-sleep wakeup for MT8183 >> arm64: dts: mt8183: add usb and phy nodes >> arm64: dts: mt8183: enable USB remote wakeup >> arm64: dts: mt8183: tune disconnect threshold of u2phy >> >> .../bindings/usb/mediatek,mtk-xhci.txt| 1 + >> .../devicetree/bindings/usb/mediatek,mtu3.txt | 1 + >> arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++ >> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +++ >> drivers/usb/host/xhci-mtk.c | 14 - >> drivers/usb/mtu3/mtu3_host.c | 14 - >> 6 files changed, 114 insertions(+), 2 deletions(-) >> > >
Re: [PATCH v3 0/7] add support USB for MT8183
On Wed, Sep 04, 2019 at 09:54:27AM +0800, Chunfeng Yun wrote: > Hi Greg, > > > Please don't try to pick up this series, the dependent ones are still > under public review, I'll fix build warning and send out new version > after the dependent ones are applied > Sorry for inconvenience No problem, now dropped from my review queue. greg k-h
Re: [PATCH v3 0/7] add support USB for MT8183
Hi Greg, Please don't try to pick up this series, the dependent ones are still under public review, I'll fix build warning and send out new version after the dependent ones are applied Sorry for inconvenience Thanks On Fri, 2019-08-30 at 15:40 +0800, Chunfeng Yun wrote: > This series support USB DRD controller and enable it's remote > wakeup functoin for MT8183, they depend on the following > series patches: > > 1. this series add support MT6358 PMIC > [v5,01/10] mfd: mt6397: clean up code > https://patchwork.kernel.org/patch/0487/ > > 2. this series add support pericfg syscon > [v2,1/2] dt-bindings: clock: mediatek: add pericfg for MT8183 > https://patchwork.kernel.org/patch/8183/ > > 3. add property mediatek,discth for tphy > [06/11] phy: phy-mtk-tphy: add a property for disconnect threshold > https://patchwork.kernel.org/patch/0695/ > > v3 changes: > 1. changes micros define > 2. remove #reset-cell > 3. update dependent series > > v2 changes: > add patch [7/7] > > Chunfeng Yun (7): > dt-bindings: usb: mtu3: support USB wakeup for MT8183 > dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183 > usb: mtu3: support ip-sleep wakeup for MT8183 > usb: mtk-xhci: support ip-sleep wakeup for MT8183 > arm64: dts: mt8183: add usb and phy nodes > arm64: dts: mt8183: enable USB remote wakeup > arm64: dts: mt8183: tune disconnect threshold of u2phy > > .../bindings/usb/mediatek,mtk-xhci.txt| 1 + > .../devicetree/bindings/usb/mediatek,mtu3.txt | 1 + > arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++ > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +++ > drivers/usb/host/xhci-mtk.c | 14 - > drivers/usb/mtu3/mtu3_host.c | 14 - > 6 files changed, 114 insertions(+), 2 deletions(-) >
[PATCH v3 0/7] add support USB for MT8183
This series support USB DRD controller and enable it's remote wakeup functoin for MT8183, they depend on the following series patches: 1. this series add support MT6358 PMIC [v5,01/10] mfd: mt6397: clean up code https://patchwork.kernel.org/patch/0487/ 2. this series add support pericfg syscon [v2,1/2] dt-bindings: clock: mediatek: add pericfg for MT8183 https://patchwork.kernel.org/patch/8183/ 3. add property mediatek,discth for tphy [06/11] phy: phy-mtk-tphy: add a property for disconnect threshold https://patchwork.kernel.org/patch/0695/ v3 changes: 1. changes micros define 2. remove #reset-cell 3. update dependent series v2 changes: add patch [7/7] Chunfeng Yun (7): dt-bindings: usb: mtu3: support USB wakeup for MT8183 dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183 usb: mtu3: support ip-sleep wakeup for MT8183 usb: mtk-xhci: support ip-sleep wakeup for MT8183 arm64: dts: mt8183: add usb and phy nodes arm64: dts: mt8183: enable USB remote wakeup arm64: dts: mt8183: tune disconnect threshold of u2phy .../bindings/usb/mediatek,mtk-xhci.txt| 1 + .../devicetree/bindings/usb/mediatek,mtu3.txt | 1 + arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++ arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +++ drivers/usb/host/xhci-mtk.c | 14 - drivers/usb/mtu3/mtu3_host.c | 14 - 6 files changed, 114 insertions(+), 2 deletions(-) -- 2.23.0
