Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
Hi, On 26 July 2017 at 20:08, Sebastian Reichel wrote: > Hi, > > On Wed, Jul 26, 2017 at 11:05:25AM +0800, Baolin Wang wrote: >> On 25 July 2017 at 17:59, Sebastian Reichel >> wrote: >> > On Tue, Jul 25, 2017 at 04:00:01PM +0800, Baolin Wang wrote: >> >> Integrate with the newly added USB charger interface to limit the current >> >> we draw from the USB input based on the input device configuration >> >> identified by the USB stack, allowing us to charge more quickly from high >> >> current inputs without drawing more current than specified from others. >> >> >> >> Signed-off-by: Mark Brown >> >> Signed-off-by: Baolin Wang >> >> --- >> >> Documentation/devicetree/bindings/mfd/wm831x.txt |1 + >> >> drivers/power/supply/wm831x_power.c | 58 >> >> ++ >> >> 2 files changed, 59 insertions(+) >> >> >> >> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt >> >> b/Documentation/devicetree/bindings/mfd/wm831x.txt >> >> index 9f8b743..4e3bc07 100644 >> >> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt >> >> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt >> >> @@ -31,6 +31,7 @@ Required properties: >> >> ../interrupt-controller/interrupts.txt >> >> >> >> Optional sub-nodes: >> >> + - usb-phy : Contains a phandle to the USB PHY. >> >>- regulators : Contains sub-nodes for each of the regulators supplied >> >> by >> >> the device. The regulators are bound using their names listed below: >> >> >> >> diff --git a/drivers/power/supply/wm831x_power.c >> >> b/drivers/power/supply/wm831x_power.c >> >> index 7082301..d3948ab 100644 >> >> --- a/drivers/power/supply/wm831x_power.c >> >> +++ b/drivers/power/supply/wm831x_power.c >> >> @@ -13,6 +13,7 @@ >> >> #include >> >> #include >> >> #include >> >> +#include >> >> >> >> #include >> >> #include >> >> @@ -31,6 +32,8 @@ struct wm831x_power { >> >> char usb_name[20]; >> >> char battery_name[20]; >> >> bool have_battery; >> >> + struct usb_phy *usb_phy; >> >> + struct notifier_block usb_notify; >> >> }; >> >> >> >> static int wm831x_power_check_online(struct wm831x *wm831x, int supply, >> >> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply >> >> *psy, >> >> POWER_SUPPLY_PROP_VOLTAGE_NOW, >> >> }; >> >> >> >> +/* In milliamps */ >> >> +static const unsigned int wm831x_usb_limits[] = { >> >> + 0, >> >> + 2, >> >> + 100, >> >> + 500, >> >> + 900, >> >> + 1500, >> >> + 1800, >> >> + 550, >> >> +}; >> >> + >> >> +static int wm831x_usb_limit_change(struct notifier_block *nb, >> >> +unsigned long limit, void *data) >> >> +{ >> >> + struct wm831x_power *wm831x_power = container_of(nb, >> >> + struct >> >> wm831x_power, >> >> + usb_notify); >> >> + unsigned int i, best; >> >> + >> >> + /* Find the highest supported limit */ >> >> + best = 0; >> >> + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { >> >> + if (limit >= wm831x_usb_limits[i] && >> >> + wm831x_usb_limits[best] < wm831x_usb_limits[i]) >> >> + best = i; >> >> + } >> >> + >> >> + dev_dbg(wm831x_power->wm831x->dev, >> >> + "Limiting USB current to %umA", wm831x_usb_limits[best]); >> >> + >> >> + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, >> >> + WM831X_USB_ILIM_MASK, best); >> >> + >> >> + return 0; >> >> +} >> >> + >> >> /* >> >> * Battery properties >> >> */ >> >> @@ -607,6 +647,19 @@ static int wm831x_power_probe(struct platform_device >> >> *pdev) >> >> } >> >> } >> >> >> >> + power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, >> >> + "usb-phy", 0); >> >> + if (!IS_ERR(power->usb_phy)) { >> >> + power->usb_notify.notifier_call = wm831x_usb_limit_change; >> >> + ret = usb_register_notifier(power->usb_phy, >> >> + &power->usb_notify); >> >> + if (ret) { >> >> + dev_err(&pdev->dev, "Failed to register notifier: >> >> %d\n", >> >> + ret); >> >> + goto err_bat_irq; >> >> + } >> >> + } >> > >> > No error handling for power->usb_phy? I think you should bail out >> > for all errors except for "not defined in DT". Especially I would >> > expect probe defer handling in case the power supply driver is >> > loaded before the phy driver. >> >> Make sense. So I think I need to change like below: >> >> power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); >> if (!IS_ERR(powe
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
Hi, On Wed, Jul 26, 2017 at 11:05:25AM +0800, Baolin Wang wrote: > On 25 July 2017 at 17:59, Sebastian Reichel > wrote: > > On Tue, Jul 25, 2017 at 04:00:01PM +0800, Baolin Wang wrote: > >> Integrate with the newly added USB charger interface to limit the current > >> we draw from the USB input based on the input device configuration > >> identified by the USB stack, allowing us to charge more quickly from high > >> current inputs without drawing more current than specified from others. > >> > >> Signed-off-by: Mark Brown > >> Signed-off-by: Baolin Wang > >> --- > >> Documentation/devicetree/bindings/mfd/wm831x.txt |1 + > >> drivers/power/supply/wm831x_power.c | 58 > >> ++ > >> 2 files changed, 59 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt > >> b/Documentation/devicetree/bindings/mfd/wm831x.txt > >> index 9f8b743..4e3bc07 100644 > >> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt > >> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt > >> @@ -31,6 +31,7 @@ Required properties: > >> ../interrupt-controller/interrupts.txt > >> > >> Optional sub-nodes: > >> + - usb-phy : Contains a phandle to the USB PHY. > >>- regulators : Contains sub-nodes for each of the regulators supplied by > >> the device. The regulators are bound using their names listed below: > >> > >> diff --git a/drivers/power/supply/wm831x_power.c > >> b/drivers/power/supply/wm831x_power.c > >> index 7082301..d3948ab 100644 > >> --- a/drivers/power/supply/wm831x_power.c > >> +++ b/drivers/power/supply/wm831x_power.c > >> @@ -13,6 +13,7 @@ > >> #include > >> #include > >> #include > >> +#include > >> > >> #include > >> #include > >> @@ -31,6 +32,8 @@ struct wm831x_power { > >> char usb_name[20]; > >> char battery_name[20]; > >> bool have_battery; > >> + struct usb_phy *usb_phy; > >> + struct notifier_block usb_notify; > >> }; > >> > >> static int wm831x_power_check_online(struct wm831x *wm831x, int supply, > >> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply > >> *psy, > >> POWER_SUPPLY_PROP_VOLTAGE_NOW, > >> }; > >> > >> +/* In milliamps */ > >> +static const unsigned int wm831x_usb_limits[] = { > >> + 0, > >> + 2, > >> + 100, > >> + 500, > >> + 900, > >> + 1500, > >> + 1800, > >> + 550, > >> +}; > >> + > >> +static int wm831x_usb_limit_change(struct notifier_block *nb, > >> +unsigned long limit, void *data) > >> +{ > >> + struct wm831x_power *wm831x_power = container_of(nb, > >> + struct wm831x_power, > >> + usb_notify); > >> + unsigned int i, best; > >> + > >> + /* Find the highest supported limit */ > >> + best = 0; > >> + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { > >> + if (limit >= wm831x_usb_limits[i] && > >> + wm831x_usb_limits[best] < wm831x_usb_limits[i]) > >> + best = i; > >> + } > >> + > >> + dev_dbg(wm831x_power->wm831x->dev, > >> + "Limiting USB current to %umA", wm831x_usb_limits[best]); > >> + > >> + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, > >> + WM831X_USB_ILIM_MASK, best); > >> + > >> + return 0; > >> +} > >> + > >> /* > >> * Battery properties > >> */ > >> @@ -607,6 +647,19 @@ static int wm831x_power_probe(struct platform_device > >> *pdev) > >> } > >> } > >> > >> + power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, > >> + "usb-phy", 0); > >> + if (!IS_ERR(power->usb_phy)) { > >> + power->usb_notify.notifier_call = wm831x_usb_limit_change; > >> + ret = usb_register_notifier(power->usb_phy, > >> + &power->usb_notify); > >> + if (ret) { > >> + dev_err(&pdev->dev, "Failed to register notifier: > >> %d\n", > >> + ret); > >> + goto err_bat_irq; > >> + } > >> + } > > > > No error handling for power->usb_phy? I think you should bail out > > for all errors except for "not defined in DT". Especially I would > > expect probe defer handling in case the power supply driver is > > loaded before the phy driver. > > Make sense. So I think I need to change like below: > > power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); > if (!IS_ERR(power->usb_phy)) { > power->usb_notify.notifier_call = wm831x_usb_limit_change; > ret = usb_register_notifier(power->usb_phy, &power->usb_notify); > if (ret) { >
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
Hi, On 25 July 2017 at 17:59, Sebastian Reichel wrote: > Hi, > > On Tue, Jul 25, 2017 at 04:00:01PM +0800, Baolin Wang wrote: >> Integrate with the newly added USB charger interface to limit the current >> we draw from the USB input based on the input device configuration >> identified by the USB stack, allowing us to charge more quickly from high >> current inputs without drawing more current than specified from others. >> >> Signed-off-by: Mark Brown >> Signed-off-by: Baolin Wang >> --- >> Documentation/devicetree/bindings/mfd/wm831x.txt |1 + >> drivers/power/supply/wm831x_power.c | 58 >> ++ >> 2 files changed, 59 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt >> b/Documentation/devicetree/bindings/mfd/wm831x.txt >> index 9f8b743..4e3bc07 100644 >> --- a/Documentation/devicetree/bindings/mfd/wm831x.txt >> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt >> @@ -31,6 +31,7 @@ Required properties: >> ../interrupt-controller/interrupts.txt >> >> Optional sub-nodes: >> + - usb-phy : Contains a phandle to the USB PHY. >>- regulators : Contains sub-nodes for each of the regulators supplied by >> the device. The regulators are bound using their names listed below: >> >> diff --git a/drivers/power/supply/wm831x_power.c >> b/drivers/power/supply/wm831x_power.c >> index 7082301..d3948ab 100644 >> --- a/drivers/power/supply/wm831x_power.c >> +++ b/drivers/power/supply/wm831x_power.c >> @@ -13,6 +13,7 @@ >> #include >> #include >> #include >> +#include >> >> #include >> #include >> @@ -31,6 +32,8 @@ struct wm831x_power { >> char usb_name[20]; >> char battery_name[20]; >> bool have_battery; >> + struct usb_phy *usb_phy; >> + struct notifier_block usb_notify; >> }; >> >> static int wm831x_power_check_online(struct wm831x *wm831x, int supply, >> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy, >> POWER_SUPPLY_PROP_VOLTAGE_NOW, >> }; >> >> +/* In milliamps */ >> +static const unsigned int wm831x_usb_limits[] = { >> + 0, >> + 2, >> + 100, >> + 500, >> + 900, >> + 1500, >> + 1800, >> + 550, >> +}; >> + >> +static int wm831x_usb_limit_change(struct notifier_block *nb, >> +unsigned long limit, void *data) >> +{ >> + struct wm831x_power *wm831x_power = container_of(nb, >> + struct wm831x_power, >> + usb_notify); >> + unsigned int i, best; >> + >> + /* Find the highest supported limit */ >> + best = 0; >> + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { >> + if (limit >= wm831x_usb_limits[i] && >> + wm831x_usb_limits[best] < wm831x_usb_limits[i]) >> + best = i; >> + } >> + >> + dev_dbg(wm831x_power->wm831x->dev, >> + "Limiting USB current to %umA", wm831x_usb_limits[best]); >> + >> + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, >> + WM831X_USB_ILIM_MASK, best); >> + >> + return 0; >> +} >> + >> /* >> * Battery properties >> */ >> @@ -607,6 +647,19 @@ static int wm831x_power_probe(struct platform_device >> *pdev) >> } >> } >> >> + power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, >> + "usb-phy", 0); >> + if (!IS_ERR(power->usb_phy)) { >> + power->usb_notify.notifier_call = wm831x_usb_limit_change; >> + ret = usb_register_notifier(power->usb_phy, >> + &power->usb_notify); >> + if (ret) { >> + dev_err(&pdev->dev, "Failed to register notifier: >> %d\n", >> + ret); >> + goto err_bat_irq; >> + } >> + } > > No error handling for power->usb_phy? I think you should bail out > for all errors except for "not defined in DT". Especially I would > expect probe defer handling in case the power supply driver is > loaded before the phy driver. Make sense. So I think I need to change like below: power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); if (!IS_ERR(power->usb_phy)) { power->usb_notify.notifier_call = wm831x_usb_limit_change; ret = usb_register_notifier(power->usb_phy, &power->usb_notify); if (ret) { dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret); goto err_bat_irq; } } else if (PTR_ERR(power->usb_phy) != -ENODEV && PTR_ERR(power->usb_phy) != -EINVAL) { ret = PTR_ERR(power->usb_phy); dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret); goto err_
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
Hi, On Tue, Jul 25, 2017 at 04:00:01PM +0800, Baolin Wang wrote: > Integrate with the newly added USB charger interface to limit the current > we draw from the USB input based on the input device configuration > identified by the USB stack, allowing us to charge more quickly from high > current inputs without drawing more current than specified from others. > > Signed-off-by: Mark Brown > Signed-off-by: Baolin Wang > --- > Documentation/devicetree/bindings/mfd/wm831x.txt |1 + > drivers/power/supply/wm831x_power.c | 58 > ++ > 2 files changed, 59 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt > b/Documentation/devicetree/bindings/mfd/wm831x.txt > index 9f8b743..4e3bc07 100644 > --- a/Documentation/devicetree/bindings/mfd/wm831x.txt > +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt > @@ -31,6 +31,7 @@ Required properties: > ../interrupt-controller/interrupts.txt > > Optional sub-nodes: > + - usb-phy : Contains a phandle to the USB PHY. >- regulators : Contains sub-nodes for each of the regulators supplied by > the device. The regulators are bound using their names listed below: > > diff --git a/drivers/power/supply/wm831x_power.c > b/drivers/power/supply/wm831x_power.c > index 7082301..d3948ab 100644 > --- a/drivers/power/supply/wm831x_power.c > +++ b/drivers/power/supply/wm831x_power.c > @@ -13,6 +13,7 @@ > #include > #include > #include > +#include > > #include > #include > @@ -31,6 +32,8 @@ struct wm831x_power { > char usb_name[20]; > char battery_name[20]; > bool have_battery; > + struct usb_phy *usb_phy; > + struct notifier_block usb_notify; > }; > > static int wm831x_power_check_online(struct wm831x *wm831x, int supply, > @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy, > POWER_SUPPLY_PROP_VOLTAGE_NOW, > }; > > +/* In milliamps */ > +static const unsigned int wm831x_usb_limits[] = { > + 0, > + 2, > + 100, > + 500, > + 900, > + 1500, > + 1800, > + 550, > +}; > + > +static int wm831x_usb_limit_change(struct notifier_block *nb, > +unsigned long limit, void *data) > +{ > + struct wm831x_power *wm831x_power = container_of(nb, > + struct wm831x_power, > + usb_notify); > + unsigned int i, best; > + > + /* Find the highest supported limit */ > + best = 0; > + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { > + if (limit >= wm831x_usb_limits[i] && > + wm831x_usb_limits[best] < wm831x_usb_limits[i]) > + best = i; > + } > + > + dev_dbg(wm831x_power->wm831x->dev, > + "Limiting USB current to %umA", wm831x_usb_limits[best]); > + > + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, > + WM831X_USB_ILIM_MASK, best); > + > + return 0; > +} > + > /* > * Battery properties > */ > @@ -607,6 +647,19 @@ static int wm831x_power_probe(struct platform_device > *pdev) > } > } > > + power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, > + "usb-phy", 0); > + if (!IS_ERR(power->usb_phy)) { > + power->usb_notify.notifier_call = wm831x_usb_limit_change; > + ret = usb_register_notifier(power->usb_phy, > + &power->usb_notify); > + if (ret) { > + dev_err(&pdev->dev, "Failed to register notifier: %d\n", > + ret); > + goto err_bat_irq; > + } > + } No error handling for power->usb_phy? I think you should bail out for all errors except for "not defined in DT". Especially I would expect probe defer handling in case the power supply driver is loaded before the phy driver. > return ret; > > err_bat_irq: > @@ -637,6 +690,11 @@ static int wm831x_power_remove(struct platform_device > *pdev) > struct wm831x *wm831x = wm831x_power->wm831x; > int irq, i; > > + if (!IS_ERR(wm831x_power->usb_phy)) { > + usb_unregister_notifier(wm831x_power->usb_phy, > + &wm831x_power->usb_notify); > + } > + > for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { > irq = wm831x_irq(wm831x, >platform_get_irq_byname(pdev, -- Sebastian signature.asc Description: PGP signature
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
On Tue, Jul 25, 2017 at 04:00:01PM +0800, Baolin Wang wrote: > Integrate with the newly added USB charger interface to limit the current > we draw from the USB input based on the input device configuration > identified by the USB stack, allowing us to charge more quickly from high > current inputs without drawing more current than specified from others. > > Signed-off-by: Mark Brown > Signed-off-by: Baolin Wang > --- Acked-by: Charles Keepax Thanks, Charles
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
On Tue, 25 Jul 2017, Baolin Wang wrote: > Integrate with the newly added USB charger interface to limit the current > we draw from the USB input based on the input device configuration > identified by the USB stack, allowing us to charge more quickly from high > current inputs without drawing more current than specified from others. > > Signed-off-by: Mark Brown > Signed-off-by: Baolin Wang > --- > Documentation/devicetree/bindings/mfd/wm831x.txt |1 + Acked-by: Lee Jones -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
[PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others. Signed-off-by: Mark Brown Signed-off-by: Baolin Wang --- Documentation/devicetree/bindings/mfd/wm831x.txt |1 + drivers/power/supply/wm831x_power.c | 58 ++ 2 files changed, 59 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt index 9f8b743..4e3bc07 100644 --- a/Documentation/devicetree/bindings/mfd/wm831x.txt +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt @@ -31,6 +31,7 @@ Required properties: ../interrupt-controller/interrupts.txt Optional sub-nodes: + - usb-phy : Contains a phandle to the USB PHY. - regulators : Contains sub-nodes for each of the regulators supplied by the device. The regulators are bound using their names listed below: diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c index 7082301..d3948ab 100644 --- a/drivers/power/supply/wm831x_power.c +++ b/drivers/power/supply/wm831x_power.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,8 @@ struct wm831x_power { char usb_name[20]; char battery_name[20]; bool have_battery; + struct usb_phy *usb_phy; + struct notifier_block usb_notify; }; static int wm831x_power_check_online(struct wm831x *wm831x, int supply, @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, }; +/* In milliamps */ +static const unsigned int wm831x_usb_limits[] = { + 0, + 2, + 100, + 500, + 900, + 1500, + 1800, + 550, +}; + +static int wm831x_usb_limit_change(struct notifier_block *nb, + unsigned long limit, void *data) +{ + struct wm831x_power *wm831x_power = container_of(nb, +struct wm831x_power, +usb_notify); + unsigned int i, best; + + /* Find the highest supported limit */ + best = 0; + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { + if (limit >= wm831x_usb_limits[i] && + wm831x_usb_limits[best] < wm831x_usb_limits[i]) + best = i; + } + + dev_dbg(wm831x_power->wm831x->dev, + "Limiting USB current to %umA", wm831x_usb_limits[best]); + + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, + WM831X_USB_ILIM_MASK, best); + + return 0; +} + /* * Battery properties */ @@ -607,6 +647,19 @@ static int wm831x_power_probe(struct platform_device *pdev) } } + power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, +"usb-phy", 0); + if (!IS_ERR(power->usb_phy)) { + power->usb_notify.notifier_call = wm831x_usb_limit_change; + ret = usb_register_notifier(power->usb_phy, + &power->usb_notify); + if (ret) { + dev_err(&pdev->dev, "Failed to register notifier: %d\n", + ret); + goto err_bat_irq; + } + } + return ret; err_bat_irq: @@ -637,6 +690,11 @@ static int wm831x_power_remove(struct platform_device *pdev) struct wm831x *wm831x = wm831x_power->wm831x; int irq, i; + if (!IS_ERR(wm831x_power->usb_phy)) { + usb_unregister_notifier(wm831x_power->usb_phy, + &wm831x_power->usb_notify); + } + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, -- 1.7.9.5
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
On Tue, Aug 18, 2015 at 07:14:21PM +0800, Baolin Wang wrote: > Integrate with the newly added USB charger interface to limit the current > we draw from the USB input based on the input device configuration > identified by the USB stack, allowing us to charge more quickly from high > current inputs without drawing more current than specified from others. > > Signed-off-by: Mark Brown > Signed-off-by: Baolin Wang > --- Acked-by: Charles Keepax Sorry if you guys got a bunch of bounces, we had a bit of an email fiasco at this end. Hopefully all fixed now. Thanks, Charles -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
On Tue, 18 Aug 2015, Charles Keepax wrote: > On Tue, Aug 18, 2015 at 07:14:21PM +0800, Baolin Wang wrote: > > Integrate with the newly added USB charger interface to limit the current > > we draw from the USB input based on the input device configuration > > identified by the USB stack, allowing us to charge more quickly from high > > current inputs without drawing more current than specified from others. > > > > Signed-off-by: Mark Brown > > Signed-off-by: Baolin Wang > > --- > > Acked-by: Charles Keepax > > Sorry if you guys got a bunch of bounces, we had a bit of an > email fiasco at this end. Hopefully all fixed now. Yes, I sent you guys a mail about that. Glad it's all sorted now. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
On Tue, 18 Aug 2015, Baolin Wang wrote: > Integrate with the newly added USB charger interface to limit the current > we draw from the USB input based on the input device configuration > identified by the USB stack, allowing us to charge more quickly from high > current inputs without drawing more current than specified from others. > > Signed-off-by: Mark Brown > Signed-off-by: Baolin Wang > --- > drivers/power/wm831x_power.c | 69 > ++ > include/linux/mfd/wm831x/pdata.h |3 ++ MFD: Acked-by: Lee Jones > 2 files changed, 72 insertions(+) > > diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c > index db11ae6..72c661f 100644 > --- a/drivers/power/wm831x_power.c > +++ b/drivers/power/wm831x_power.c > @@ -13,6 +13,7 @@ > #include > #include > #include > +#include > > #include > #include > @@ -31,6 +32,8 @@ struct wm831x_power { > char usb_name[20]; > char battery_name[20]; > bool have_battery; > + struct usb_charger *usb_charger; > + struct notifier_block usb_notify; > }; > > static int wm831x_power_check_online(struct wm831x *wm831x, int supply, > @@ -125,6 +128,43 @@ static enum power_supply_property wm831x_usb_props[] = { > POWER_SUPPLY_PROP_VOLTAGE_NOW, > }; > > +/* In miliamps */ > +static unsigned int wm831x_usb_limits[] = { > + 0, > + 2, > + 100, > + 500, > + 900, > + 1500, > + 1800, > + 550, > +}; > + > +static int wm831x_usb_limit_change(struct notifier_block *nb, > +unsigned long limit, void *data) > +{ > + struct wm831x_power *wm831x_power = container_of(nb, > + struct wm831x_power, > + usb_notify); > + int i, best; > + > + /* Find the highest supported limit */ > + best = 0; > + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { > + if (limit < wm831x_usb_limits[i] && > + wm831x_usb_limits[best] < wm831x_usb_limits[i]) > + best = i; > + } > + > + dev_dbg(wm831x_power->wm831x->dev, > + "Limiting USB current to %dmA", wm831x_usb_limits[best]); > + > + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, > + WM831X_USB_ILIM_MASK, best); > + > + return 0; > +} > + > /* > * Battery properties > */ > @@ -606,8 +646,31 @@ static int wm831x_power_probe(struct platform_device > *pdev) > } > } > > + if (wm831x_pdata && wm831x_pdata->usb_gadget) { > + power->usb_charger = > + usb_charger_find_by_name(wm831x_pdata->usb_gadget); > + if (IS_ERR(power->usb_charger)) { > + ret = PTR_ERR(power->usb_charger); > + dev_err(&pdev->dev, > + "Failed to find USB gadget: %d\n", ret); > + goto err_bat_irq; > + } > + > + power->usb_notify.notifier_call = wm831x_usb_limit_change; > + > + ret = usb_charger_register_notify(power->usb_charger, > + &power->usb_notify); > + if (ret != 0) { > + dev_err(&pdev->dev, > + "Failed to register notifier: %d\n", ret); > + goto err_usb_charger; > + } > + } > + > return ret; > > +err_usb_charger: > + usb_charger_put(power->usb_charger); > err_bat_irq: > --i; > for (; i >= 0; i--) { > @@ -637,6 +700,12 @@ static int wm831x_power_remove(struct platform_device > *pdev) > struct wm831x *wm831x = wm831x_power->wm831x; > int irq, i; > > + if (wm831x_power->usb_charger) { > + usb_charger_unregister_notify(wm831x_power->usb_charger, > + &wm831x_power->usb_notify); > + usb_charger_put(wm831x_power->usb_charger); > + } > + > for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { > irq = wm831x_irq(wm831x, >platform_get_irq_byname(pdev, > diff --git a/include/linux/mfd/wm831x/pdata.h > b/include/linux/mfd/wm831x/pdata.h > index dcc9631..5af8399 100644 > --- a/include/linux/mfd/wm831x/pdata.h > +++ b/include/linux/mfd/wm831x/pdata.h > @@ -126,6 +126,9 @@ struct wm831x_pdata { > /** The driver should initiate a power off sequence during shutdown */ > bool soft_shutdown; > > + /** dev_name of USB charger gadget to integrate with */ > + const char *usb_gadget; > + > int irq_base; > int gpio_base; > int gpio_defaults[WM831X_GPIO_NUM]; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Ope
[PATCH v3 3/3] power: wm831x_power: Support USB charger current limit management
Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others. Signed-off-by: Mark Brown Signed-off-by: Baolin Wang --- drivers/power/wm831x_power.c | 69 ++ include/linux/mfd/wm831x/pdata.h |3 ++ 2 files changed, 72 insertions(+) diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c index db11ae6..72c661f 100644 --- a/drivers/power/wm831x_power.c +++ b/drivers/power/wm831x_power.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,8 @@ struct wm831x_power { char usb_name[20]; char battery_name[20]; bool have_battery; + struct usb_charger *usb_charger; + struct notifier_block usb_notify; }; static int wm831x_power_check_online(struct wm831x *wm831x, int supply, @@ -125,6 +128,43 @@ static enum power_supply_property wm831x_usb_props[] = { POWER_SUPPLY_PROP_VOLTAGE_NOW, }; +/* In miliamps */ +static unsigned int wm831x_usb_limits[] = { + 0, + 2, + 100, + 500, + 900, + 1500, + 1800, + 550, +}; + +static int wm831x_usb_limit_change(struct notifier_block *nb, + unsigned long limit, void *data) +{ + struct wm831x_power *wm831x_power = container_of(nb, +struct wm831x_power, +usb_notify); + int i, best; + + /* Find the highest supported limit */ + best = 0; + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) { + if (limit < wm831x_usb_limits[i] && + wm831x_usb_limits[best] < wm831x_usb_limits[i]) + best = i; + } + + dev_dbg(wm831x_power->wm831x->dev, + "Limiting USB current to %dmA", wm831x_usb_limits[best]); + + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE, + WM831X_USB_ILIM_MASK, best); + + return 0; +} + /* * Battery properties */ @@ -606,8 +646,31 @@ static int wm831x_power_probe(struct platform_device *pdev) } } + if (wm831x_pdata && wm831x_pdata->usb_gadget) { + power->usb_charger = + usb_charger_find_by_name(wm831x_pdata->usb_gadget); + if (IS_ERR(power->usb_charger)) { + ret = PTR_ERR(power->usb_charger); + dev_err(&pdev->dev, + "Failed to find USB gadget: %d\n", ret); + goto err_bat_irq; + } + + power->usb_notify.notifier_call = wm831x_usb_limit_change; + + ret = usb_charger_register_notify(power->usb_charger, + &power->usb_notify); + if (ret != 0) { + dev_err(&pdev->dev, + "Failed to register notifier: %d\n", ret); + goto err_usb_charger; + } + } + return ret; +err_usb_charger: + usb_charger_put(power->usb_charger); err_bat_irq: --i; for (; i >= 0; i--) { @@ -637,6 +700,12 @@ static int wm831x_power_remove(struct platform_device *pdev) struct wm831x *wm831x = wm831x_power->wm831x; int irq, i; + if (wm831x_power->usb_charger) { + usb_charger_unregister_notify(wm831x_power->usb_charger, + &wm831x_power->usb_notify); + usb_charger_put(wm831x_power->usb_charger); + } + for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index dcc9631..5af8399 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -126,6 +126,9 @@ struct wm831x_pdata { /** The driver should initiate a power off sequence during shutdown */ bool soft_shutdown; + /** dev_name of USB charger gadget to integrate with */ + const char *usb_gadget; + int irq_base; int gpio_base; int gpio_defaults[WM831X_GPIO_NUM]; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/