Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
On Tuesday 29 January 2013 06:55 PM, Rob Herring wrote: > On 01/24/2013 04:50 AM, Vineet Gupta wrote: >> This is minimal infrastructure needed for devicetree work. >> It uses an a sample "skeleton" devicetree - embedded in kernel image - >> to print the board, manufacturer by parsing the top-level "compatible" >> string. >> >> As of now we don't need any additional "board" specific "machine_desc". >> >> TODO: support interpreting the command line as boot-loader passed dtb >> >> Signed-off-by: Vineet Gupta >> Cc: Arnd Bergmann >> Cc: Grant Likely >> Cc: devicetree-disc...@lists.ozlabs.org >> Cc: Rob Herring > One minor thing below, otherwise: > > Reviewed-by: Rob Herring > > >> diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c >> new file mode 100644 >> index 000..229f78e >> --- /dev/null >> +++ b/arch/arc/kernel/devtree.c >> @@ -0,0 +1,69 @@ >> +/* >> + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) >> + * >> + * Based on highly stipped down version of METAG >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> + >> +#include >> +#include >> +#include > Is this include needed? Nope - removed. > >> +#include >> +#include > And this? reboot.h is needed for the machine_halt() prototype. > >> +#include >> +#include >> +#include >> +#include > And this? > >> +#include > And this? Both of the above removed. I'll send a revised patch which also addresses James' review comments as well - (namely broken dtbs rule, adding dependency on scripts ...) See https://lkml.org/lkml/2013/1/28/138 for reference. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
On 01/24/2013 04:50 AM, Vineet Gupta wrote: > This is minimal infrastructure needed for devicetree work. > It uses an a sample "skeleton" devicetree - embedded in kernel image - > to print the board, manufacturer by parsing the top-level "compatible" > string. > > As of now we don't need any additional "board" specific "machine_desc". > > TODO: support interpreting the command line as boot-loader passed dtb > > Signed-off-by: Vineet Gupta > Cc: Arnd Bergmann > Cc: Grant Likely > Cc: devicetree-disc...@lists.ozlabs.org > Cc: Rob Herring One minor thing below, otherwise: Reviewed-by: Rob Herring > diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c > new file mode 100644 > index 000..229f78e > --- /dev/null > +++ b/arch/arc/kernel/devtree.c > @@ -0,0 +1,69 @@ > +/* > + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) > + * > + * Based on highly stipped down version of METAG > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > + > +#include > +#include > +#include Is this include needed? > +#include > +#include And this? > +#include > +#include > +#include > +#include And this? > +#include And this? > +#include > + > +/* called from unflatten_device_tree() to bootstrap devicetree itself */ > +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) > +{ > + return __va(memblock_alloc(size, align)); > +} > + > +/** > + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel > + * @dt: virtual address pointer to dt blob > + * > + * If a dtb was passed to the kernel, then use it to choose the correct > + * machine_desc and to setup the system. > + */ > +int __init setup_machine_fdt(void *dt) > +{ > + struct boot_param_header *devtree = dt; > + unsigned long dt_root; > + char *model, *compat; > + char manufacturer[16]; > + > + /* check device tree validity */ > + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) > + return 1; > + > + /* Search the mdescs for the 'best' compatible value match */ > + initial_boot_params = devtree; > + dt_root = of_get_flat_dt_root(); > + > + /* compat = "," */ > + compat = of_get_flat_dt_prop(dt_root, "compatible", NULL); > + if (!compat) > + compat = ""; > + > + model = strchr(compat, ','); > + if (model) > + model++; > + > + strlcpy(manufacturer, compat, model ? model - compat : strlen(compat)); > + > + pr_info("Board \"%s\" from %s (Manufacturer)\n", model, manufacturer); > + > + /* Retrieve various information from the /chosen node */ > + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); > + > + return 0; > +} > diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c > index 82ac206..27aebd6 100644 > --- a/arch/arc/kernel/setup.c > +++ b/arch/arc/kernel/setup.c > @@ -13,6 +13,8 @@ > #include > #include > #include > +#include > +#include > #include > #include > #include > @@ -20,6 +22,7 @@ > #include > #include > #include > +#include > > #define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x)) > > @@ -57,6 +60,8 @@ void __init __attribute__((weak)) > arc_platform_early_init(void) > > void __init setup_arch(char **cmdline_p) > { > + int rc; > + > #ifdef CONFIG_CMDLINE_UBOOT > /* Make sure that a whitespace is inserted before */ > strlcat(command_line, " ", sizeof(command_line)); > @@ -71,6 +76,8 @@ void __init setup_arch(char **cmdline_p) > strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); > *cmdline_p = command_line; > > + rc = setup_machine_fdt(__dtb_start); > + > /* To force early parsing of things like mem=xxx */ > parse_early_param(); > > @@ -81,6 +88,8 @@ void __init setup_arch(char **cmdline_p) > > setup_arch_memory(); > > + unflatten_device_tree(); > + > /* Can be issue if someone passes cmd line arg "ro" >* But that is unlikely so keeping it as it is >*/ > diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c > index 63da347..682cf57 100644 > --- a/arch/arc/mm/init.c > +++ b/arch/arc/mm/init.c > @@ -39,6 +39,11 @@ static int __init setup_mem_sz(char *str) > } > early_param("mem", setup_mem_sz); > > +void __init early_init_dt_add_memory_arch(u64 base, u64 size) > +{ > + pr_err("%s(%llx, %llx)\n", __func__, base, size); > +} > + > /* > * First memory setup routine called from setup_arch() > * 1. setup swapper's mm @init_mm > @@ -169,3 +174,11 @@ void __init free_initrd_mem(unsigned long start, > unsigned long end) > free_init_pages("initrd memory", start, end); > } > #endif > + > +#ifdef CONFIG_OF_FLATTREE > +void __init early_init_dt_setup_initrd_arch(unsigned long start, > + unsigned long end) > +{ >
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi Vineet, >> arm64 also adds dtbs and $(dtb-y) to targets (at least in linux-next). I >> think this makes sure that they don't get rebuilt unless they've >> actually changed. I've also copied this for metag. > > Did you verify that it makes a difference - at least at my end it's not - the > default dtb is getting rebuilt everytime. I need to debug this some more. Yeh, for me it prevents the following build lines appearing every time: DTC arch/metag/boot/dts/tz1090_01sp.dtb but it still does these every time: DTBarch/metag/boot/dts/tz1090_01sp.dtb.S AS arch/metag/boot/dts/tz1090_01sp.dtb.o Adding dtbs o targets actually didn't seem to be necessary with $(dtb-y) added. Cheers James -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi James, On Monday 28 January 2013 03:51 PM, James Hogan wrote: > Hi Vineet, > > On 24/01/13 10:50, Vineet Gupta wrote: >> diff --git a/arch/arc/Makefile b/arch/arc/Makefile >> index 4d52a3b..90570f9 100644 >> --- a/arch/arc/Makefile >> +++ b/arch/arc/Makefile >> @@ -83,6 +83,9 @@ head-y := arch/arc/kernel/head.o >> # See arch/arc/Kbuild for content of core part of the kernel >> core-y += arch/arc/ >> >> +# w/o this dtb won't embed into kernel binary >> +core-y += arch/arc/boot/dts/ >> + >> # w/o this ifneq, make ARCH=arc clean was crapping out >> ifneq ($(platform-y),) >> core-y += arch/arc/plat-$(PLATFORM)/ >> @@ -101,6 +104,12 @@ bootpImage: vmlinux >> uImage: vmlinux >> $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ >> >> +%.dtb %.dtb.S %.dtb.o: >> +$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ > > arm64 also depends on scripts here, presumably for a reason. I've copied > this in metag too. It probably has to do with forcing rebuild of DTs, in case scripts/dtc/dtc changes. I'll add that as well. >> + >> +dtbs: >> +$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ > > arm64 does this like below which I think is slightly nicer than how > metag did it: > > dtbs: scripts > $(Q)$(MAKE) $(build)=$(boot)/dts dtbs OK ! >> + >> archclean: >> $(Q)$(MAKE) $(clean)=$(boot) >> >> diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile >> new file mode 100644 >> index 000..4a972a3 >> --- /dev/null >> +++ b/arch/arc/boot/dts/Makefile >> @@ -0,0 +1,14 @@ >> +ifeq ($(CONFIG_OF),y) >> + >> +# Built-in dtb >> +builtindtb-y:= skeleton >> + >> +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"") >> +builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) >> +endif >> + >> +obj-y += $(patsubst "%",%,$(builtindtb-y)).dtb.o >> + >> +clean-files := *.dtb > > You don't seem to have a rule for dtbs, but still redirect it in the > main Makefile. I suppose dtbs may want adding to your archhelp if you > use it. The dtbs rule doesn't seem to be working for me here. I'll need to investigate a bit. > > arm64 also adds dtbs and $(dtb-y) to targets (at least in linux-next). I > think this makes sure that they don't get rebuilt unless they've > actually changed. I've also copied this for metag. Did you verify that it makes a difference - at least at my end it's not - the default dtb is getting rebuilt everytime. I need to debug this some more. >> --- a/arch/arc/kernel/Makefile >> +++ b/arch/arc/kernel/Makefile >> @@ -8,6 +8,8 @@ >> obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o >> process.o >> obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o >> >> +obj-$(CONFIG_OF)+= devtree.o >> + > > You always select CONFIG_OF, so this could be obj-y. I'm not sure this > particularly matters though. Right, for consistency we might add this unconditionally. Thanks for your review -Vineet -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi James, On Monday 28 January 2013 03:51 PM, James Hogan wrote: Hi Vineet, On 24/01/13 10:50, Vineet Gupta wrote: diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 4d52a3b..90570f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -83,6 +83,9 @@ head-y := arch/arc/kernel/head.o # See arch/arc/Kbuild for content of core part of the kernel core-y += arch/arc/ +# w/o this dtb won't embed into kernel binary +core-y += arch/arc/boot/dts/ + # w/o this ifneq, make ARCH=arc clean was crapping out ifneq ($(platform-y),) core-y += arch/arc/plat-$(PLATFORM)/ @@ -101,6 +104,12 @@ bootpImage: vmlinux uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +%.dtb %.dtb.S %.dtb.o: +$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ arm64 also depends on scripts here, presumably for a reason. I've copied this in metag too. It probably has to do with forcing rebuild of DTs, in case scripts/dtc/dtc changes. I'll add that as well. + +dtbs: +$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ arm64 does this like below which I think is slightly nicer than how metag did it: dtbs: scripts $(Q)$(MAKE) $(build)=$(boot)/dts dtbs OK ! + archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 000..4a972a3 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,14 @@ +ifeq ($(CONFIG_OF),y) + +# Built-in dtb +builtindtb-y:= skeleton + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),) +builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) +endif + +obj-y += $(patsubst %,%,$(builtindtb-y)).dtb.o + +clean-files := *.dtb You don't seem to have a rule for dtbs, but still redirect it in the main Makefile. I suppose dtbs may want adding to your archhelp if you use it. The dtbs rule doesn't seem to be working for me here. I'll need to investigate a bit. arm64 also adds dtbs and $(dtb-y) to targets (at least in linux-next). I think this makes sure that they don't get rebuilt unless they've actually changed. I've also copied this for metag. Did you verify that it makes a difference - at least at my end it's not - the default dtb is getting rebuilt everytime. I need to debug this some more. --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -8,6 +8,8 @@ obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o process.o obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o +obj-$(CONFIG_OF)+= devtree.o + You always select CONFIG_OF, so this could be obj-y. I'm not sure this particularly matters though. Right, for consistency we might add this unconditionally. Thanks for your review -Vineet -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi Vineet, arm64 also adds dtbs and $(dtb-y) to targets (at least in linux-next). I think this makes sure that they don't get rebuilt unless they've actually changed. I've also copied this for metag. Did you verify that it makes a difference - at least at my end it's not - the default dtb is getting rebuilt everytime. I need to debug this some more. Yeh, for me it prevents the following build lines appearing every time: DTC arch/metag/boot/dts/tz1090_01sp.dtb but it still does these every time: DTBarch/metag/boot/dts/tz1090_01sp.dtb.S AS arch/metag/boot/dts/tz1090_01sp.dtb.o Adding dtbs o targets actually didn't seem to be necessary with $(dtb-y) added. Cheers James -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
On 01/24/2013 04:50 AM, Vineet Gupta wrote: This is minimal infrastructure needed for devicetree work. It uses an a sample skeleton devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level compatible string. As of now we don't need any additional board specific machine_desc. TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta vgu...@synopsys.com Cc: Arnd Bergmann a...@arndb.de Cc: Grant Likely grant.lik...@secretlab.ca Cc: devicetree-disc...@lists.ozlabs.org Cc: Rob Herring rob.herr...@calxeda.com One minor thing below, otherwise: Reviewed-by: Rob Herring rob.herr...@calxeda.com diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c new file mode 100644 index 000..229f78e --- /dev/null +++ b/arch/arc/kernel/devtree.c @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * Based on highly stipped down version of METAG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include linux/init.h +#include linux/export.h +#include linux/errno.h Is this include needed? +#include linux/types.h +#include linux/reboot.h And this? +#include linux/memblock.h +#include linux/of.h +#include linux/of_fdt.h +#include linux/of_irq.h And this? +#include linux/of_platform.h And this? +#include asm/prom.h + +/* called from unflatten_device_tree() to bootstrap devicetree itself */ +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __va(memblock_alloc(size, align)); +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt: virtual address pointer to dt blob + * + * If a dtb was passed to the kernel, then use it to choose the correct + * machine_desc and to setup the system. + */ +int __init setup_machine_fdt(void *dt) +{ + struct boot_param_header *devtree = dt; + unsigned long dt_root; + char *model, *compat; + char manufacturer[16]; + + /* check device tree validity */ + if (be32_to_cpu(devtree-magic) != OF_DT_HEADER) + return 1; + + /* Search the mdescs for the 'best' compatible value match */ + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + + /* compat = manufacturer,model */ + compat = of_get_flat_dt_prop(dt_root, compatible, NULL); + if (!compat) + compat = unknown; + + model = strchr(compat, ','); + if (model) + model++; + + strlcpy(manufacturer, compat, model ? model - compat : strlen(compat)); + + pr_info(Board \%s\ from %s (Manufacturer)\n, model, manufacturer); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + + return 0; +} diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 82ac206..27aebd6 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -13,6 +13,8 @@ #include linux/console.h #include linux/module.h #include linux/cpu.h +#include linux/of_fdt.h +#include asm/sections.h #include asm/arcregs.h #include asm/tlb.h #include asm/cache.h @@ -20,6 +22,7 @@ #include asm/page.h #include asm/irq.h #include asm/arcregs.h +#include asm/prom.h #define FIX_PTR(x) __asm__ __volatile__(; : +r(x)) @@ -57,6 +60,8 @@ void __init __attribute__((weak)) arc_platform_early_init(void) void __init setup_arch(char **cmdline_p) { + int rc; + #ifdef CONFIG_CMDLINE_UBOOT /* Make sure that a whitespace is inserted before */ strlcat(command_line, , sizeof(command_line)); @@ -71,6 +76,8 @@ void __init setup_arch(char **cmdline_p) strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; + rc = setup_machine_fdt(__dtb_start); + /* To force early parsing of things like mem=xxx */ parse_early_param(); @@ -81,6 +88,8 @@ void __init setup_arch(char **cmdline_p) setup_arch_memory(); + unflatten_device_tree(); + /* Can be issue if someone passes cmd line arg ro * But that is unlikely so keeping it as it is */ diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 63da347..682cf57 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -39,6 +39,11 @@ static int __init setup_mem_sz(char *str) } early_param(mem, setup_mem_sz); +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + pr_err(%s(%llx, %llx)\n, __func__, base, size); +} + /* * First memory setup routine called from setup_arch() * 1. setup swapper's mm @init_mm @@ -169,3 +174,11 @@ void __init free_initrd_mem(unsigned long start, unsigned long end)
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
On Tuesday 29 January 2013 06:55 PM, Rob Herring wrote: On 01/24/2013 04:50 AM, Vineet Gupta wrote: This is minimal infrastructure needed for devicetree work. It uses an a sample skeleton devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level compatible string. As of now we don't need any additional board specific machine_desc. TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta vgu...@synopsys.com Cc: Arnd Bergmann a...@arndb.de Cc: Grant Likely grant.lik...@secretlab.ca Cc: devicetree-disc...@lists.ozlabs.org Cc: Rob Herring rob.herr...@calxeda.com One minor thing below, otherwise: Reviewed-by: Rob Herring rob.herr...@calxeda.com diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c new file mode 100644 index 000..229f78e --- /dev/null +++ b/arch/arc/kernel/devtree.c @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * Based on highly stipped down version of METAG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include linux/init.h +#include linux/export.h +#include linux/errno.h Is this include needed? Nope - removed. +#include linux/types.h +#include linux/reboot.h And this? reboot.h is needed for the machine_halt() prototype. +#include linux/memblock.h +#include linux/of.h +#include linux/of_fdt.h +#include linux/of_irq.h And this? +#include linux/of_platform.h And this? Both of the above removed. I'll send a revised patch which also addresses James' review comments as well - (namely broken dtbs rule, adding dependency on scripts ...) See https://lkml.org/lkml/2013/1/28/138 for reference. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi Vineet, On 24/01/13 10:50, Vineet Gupta wrote: > diff --git a/arch/arc/Makefile b/arch/arc/Makefile > index 4d52a3b..90570f9 100644 > --- a/arch/arc/Makefile > +++ b/arch/arc/Makefile > @@ -83,6 +83,9 @@ head-y := arch/arc/kernel/head.o > # See arch/arc/Kbuild for content of core part of the kernel > core-y += arch/arc/ > > +# w/o this dtb won't embed into kernel binary > +core-y += arch/arc/boot/dts/ > + > # w/o this ifneq, make ARCH=arc clean was crapping out > ifneq ($(platform-y),) > core-y += arch/arc/plat-$(PLATFORM)/ > @@ -101,6 +104,12 @@ bootpImage: vmlinux > uImage: vmlinux > $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ > > +%.dtb %.dtb.S %.dtb.o: > + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ arm64 also depends on scripts here, presumably for a reason. I've copied this in metag too. > + > +dtbs: > + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ arm64 does this like below which I think is slightly nicer than how metag did it: dtbs: scripts $(Q)$(MAKE) $(build)=$(boot)/dts dtbs > + > archclean: > $(Q)$(MAKE) $(clean)=$(boot) > > diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile > new file mode 100644 > index 000..4a972a3 > --- /dev/null > +++ b/arch/arc/boot/dts/Makefile > @@ -0,0 +1,14 @@ > +ifeq ($(CONFIG_OF),y) > + > +# Built-in dtb > +builtindtb-y := skeleton > + > +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"") > + builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) > +endif > + > +obj-y+= $(patsubst "%",%,$(builtindtb-y)).dtb.o > + > +clean-files := *.dtb You don't seem to have a rule for dtbs, but still redirect it in the main Makefile. I suppose dtbs may want adding to your archhelp if you use it. arm64 also adds dtbs and $(dtb-y) to targets (at least in linux-next). I think this makes sure that they don't get rebuilt unless they've actually changed. I've also copied this for metag. > --- a/arch/arc/kernel/Makefile > +++ b/arch/arc/kernel/Makefile > @@ -8,6 +8,8 @@ > obj-y:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o > process.o > obj-y+= signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o > > +obj-$(CONFIG_OF) += devtree.o > + You always select CONFIG_OF, so this could be obj-y. I'm not sure this particularly matters though. Cheers James -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi Vineet, On 24/01/13 10:50, Vineet Gupta wrote: diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 4d52a3b..90570f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -83,6 +83,9 @@ head-y := arch/arc/kernel/head.o # See arch/arc/Kbuild for content of core part of the kernel core-y += arch/arc/ +# w/o this dtb won't embed into kernel binary +core-y += arch/arc/boot/dts/ + # w/o this ifneq, make ARCH=arc clean was crapping out ifneq ($(platform-y),) core-y += arch/arc/plat-$(PLATFORM)/ @@ -101,6 +104,12 @@ bootpImage: vmlinux uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +%.dtb %.dtb.S %.dtb.o: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ arm64 also depends on scripts here, presumably for a reason. I've copied this in metag too. + +dtbs: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ arm64 does this like below which I think is slightly nicer than how metag did it: dtbs: scripts $(Q)$(MAKE) $(build)=$(boot)/dts dtbs + archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 000..4a972a3 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,14 @@ +ifeq ($(CONFIG_OF),y) + +# Built-in dtb +builtindtb-y := skeleton + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),) + builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) +endif + +obj-y+= $(patsubst %,%,$(builtindtb-y)).dtb.o + +clean-files := *.dtb You don't seem to have a rule for dtbs, but still redirect it in the main Makefile. I suppose dtbs may want adding to your archhelp if you use it. arm64 also adds dtbs and $(dtb-y) to targets (at least in linux-next). I think this makes sure that they don't get rebuilt unless they've actually changed. I've also copied this for metag. --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -8,6 +8,8 @@ obj-y:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o process.o obj-y+= signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o +obj-$(CONFIG_OF) += devtree.o + You always select CONFIG_OF, so this could be obj-y. I'm not sure this particularly matters though. Cheers James -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi Rob, On Thursday 24 January 2013 04:20 PM, Vineet Gupta wrote: > This is minimal infrastructure needed for devicetree work. > It uses an a sample "skeleton" devicetree - embedded in kernel image - > to print the board, manufacturer by parsing the top-level "compatible" > string. > > As of now we don't need any additional "board" specific "machine_desc". > > TODO: support interpreting the command line as boot-loader passed dtb > > Signed-off-by: Vineet Gupta > > Cc: Arnd Bergmann > Cc: Grant Likely > Cc: devicetree-discuss-uLR06cmDAlY/bj5bz2r...@public.gmane.org > Cc: Rob Herring > --- > arch/arc/Kconfig|9 + > arch/arc/Makefile |9 + > arch/arc/boot/dts/Makefile | 14 > arch/arc/boot/dts/skeleton.dts | 10 ++ > arch/arc/boot/dts/skeleton.dtsi | 21 > arch/arc/include/asm/prom.h | 15 > arch/arc/include/asm/sections.h |1 + > arch/arc/kernel/Makefile|2 + > arch/arc/kernel/devtree.c | 69 > +++ > arch/arc/kernel/setup.c |9 + > arch/arc/mm/init.c | 13 +++ > 11 files changed, 172 insertions(+), 0 deletions(-) > create mode 100644 arch/arc/boot/dts/Makefile > create mode 100644 arch/arc/boot/dts/skeleton.dts > create mode 100644 arch/arc/boot/dts/skeleton.dtsi > create mode 100644 arch/arc/include/asm/prom.h > create mode 100644 arch/arc/kernel/devtree.c > > diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig > index a353849..7666857 100644 > --- a/arch/arc/Kconfig > +++ b/arch/arc/Kconfig > @@ -24,8 +24,11 @@ config ARC > select GENERIC_SMP_IDLE_THREAD > select HAVE_GENERIC_HARDIRQS > select HAVE_MEMBLOCK > + select IRQ_DOMAIN > select MODULES_USE_ELF_RELA > select NO_BOOTMEM > + select OF > + select OF_EARLY_FLATTREE > > config SCHED_OMIT_FRAME_POINTER > def_bool y > @@ -320,6 +323,12 @@ config CMDLINE_UBOOT > to it. kernel startup code will copy the string into cmdline buffer > and also append CONFIG_CMDLINE. > > +config ARC_BUILTIN_DTB_NAME > + string "Built in DTB" > + help > + Set the name of the DTB to embed in the vmlinux binary > + Leaving it blank selects the minimal "skeleton" dtb > + > source "kernel/Kconfig.preempt" > > endmenu # "ARC Architecture Configuration" > diff --git a/arch/arc/Makefile b/arch/arc/Makefile > index 4d52a3b..90570f9 100644 > --- a/arch/arc/Makefile > +++ b/arch/arc/Makefile > @@ -83,6 +83,9 @@ head-y := arch/arc/kernel/head.o > # See arch/arc/Kbuild for content of core part of the kernel > core-y += arch/arc/ > > +# w/o this dtb won't embed into kernel binary > +core-y += arch/arc/boot/dts/ > + > # w/o this ifneq, make ARCH=arc clean was crapping out > ifneq ($(platform-y),) > core-y += arch/arc/plat-$(PLATFORM)/ > @@ -101,6 +104,12 @@ bootpImage: vmlinux > uImage: vmlinux > $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ > > +%.dtb %.dtb.S %.dtb.o: > + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ > + > +dtbs: > + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ > + > archclean: > $(Q)$(MAKE) $(clean)=$(boot) > > diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile > new file mode 100644 > index 000..4a972a3 > --- /dev/null > +++ b/arch/arc/boot/dts/Makefile > @@ -0,0 +1,14 @@ > +ifeq ($(CONFIG_OF),y) > + > +# Built-in dtb > +builtindtb-y := skeleton > + > +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"") > + builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) > +endif > + > +obj-y+= $(patsubst "%",%,$(builtindtb-y)).dtb.o > + > +clean-files := *.dtb > + > +endif > diff --git a/arch/arc/boot/dts/skeleton.dts b/arch/arc/boot/dts/skeleton.dts > new file mode 100644 > index 000..25a84fb > --- /dev/null > +++ b/arch/arc/boot/dts/skeleton.dts > @@ -0,0 +1,10 @@ > +/* > + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +/dts-v1/; > + > +/include/ "skeleton.dtsi" > diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi > new file mode 100644 > index 000..9b357d8 > --- /dev/null > +++ b/arch/arc/boot/dts/skeleton.dtsi > @@ -0,0 +1,21 @@ > +/* > + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/* > + * Skeleton device tree; the bare minimum needed to boot; just include and > + * add a compatible value. > + */ > + > +/ { > + compatible = "snps,arc"; > + #address-cells = <1>; > + #size-cells
Re: [PATCH v3 32/71] ARC: [DeviceTree] Basic support
Hi Rob, On Thursday 24 January 2013 04:20 PM, Vineet Gupta wrote: This is minimal infrastructure needed for devicetree work. It uses an a sample skeleton devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level compatible string. As of now we don't need any additional board specific machine_desc. TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta vgupta-HKixBCOQz3hWk0Htik3J/w...@public.gmane.org Cc: Arnd Bergmann arnd-r2ngtmty...@public.gmane.org Cc: Grant Likely grant.likely-s3s/wqlpoipyb63q8fv...@public.gmane.org Cc: devicetree-discuss-uLR06cmDAlY/bj5bz2r...@public.gmane.org Cc: Rob Herring rob.herring-bsGFqQB8/dxbdgjk7y7...@public.gmane.org --- arch/arc/Kconfig|9 + arch/arc/Makefile |9 + arch/arc/boot/dts/Makefile | 14 arch/arc/boot/dts/skeleton.dts | 10 ++ arch/arc/boot/dts/skeleton.dtsi | 21 arch/arc/include/asm/prom.h | 15 arch/arc/include/asm/sections.h |1 + arch/arc/kernel/Makefile|2 + arch/arc/kernel/devtree.c | 69 +++ arch/arc/kernel/setup.c |9 + arch/arc/mm/init.c | 13 +++ 11 files changed, 172 insertions(+), 0 deletions(-) create mode 100644 arch/arc/boot/dts/Makefile create mode 100644 arch/arc/boot/dts/skeleton.dts create mode 100644 arch/arc/boot/dts/skeleton.dtsi create mode 100644 arch/arc/include/asm/prom.h create mode 100644 arch/arc/kernel/devtree.c diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index a353849..7666857 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -24,8 +24,11 @@ config ARC select GENERIC_SMP_IDLE_THREAD select HAVE_GENERIC_HARDIRQS select HAVE_MEMBLOCK + select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM + select OF + select OF_EARLY_FLATTREE config SCHED_OMIT_FRAME_POINTER def_bool y @@ -320,6 +323,12 @@ config CMDLINE_UBOOT to it. kernel startup code will copy the string into cmdline buffer and also append CONFIG_CMDLINE. +config ARC_BUILTIN_DTB_NAME + string Built in DTB + help + Set the name of the DTB to embed in the vmlinux binary + Leaving it blank selects the minimal skeleton dtb + source kernel/Kconfig.preempt endmenu # ARC Architecture Configuration diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 4d52a3b..90570f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -83,6 +83,9 @@ head-y := arch/arc/kernel/head.o # See arch/arc/Kbuild for content of core part of the kernel core-y += arch/arc/ +# w/o this dtb won't embed into kernel binary +core-y += arch/arc/boot/dts/ + # w/o this ifneq, make ARCH=arc clean was crapping out ifneq ($(platform-y),) core-y += arch/arc/plat-$(PLATFORM)/ @@ -101,6 +104,12 @@ bootpImage: vmlinux uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +%.dtb %.dtb.S %.dtb.o: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + +dtbs: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 000..4a972a3 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,14 @@ +ifeq ($(CONFIG_OF),y) + +# Built-in dtb +builtindtb-y := skeleton + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),) + builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) +endif + +obj-y+= $(patsubst %,%,$(builtindtb-y)).dtb.o + +clean-files := *.dtb + +endif diff --git a/arch/arc/boot/dts/skeleton.dts b/arch/arc/boot/dts/skeleton.dts new file mode 100644 index 000..25a84fb --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dts @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ skeleton.dtsi diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi new file mode 100644 index 000..9b357d8 --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. + */ + +/ { + compatible = snps,arc; + #address-cells = 1; +
[PATCH v3 32/71] ARC: [DeviceTree] Basic support
This is minimal infrastructure needed for devicetree work. It uses an a sample "skeleton" devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level "compatible" string. As of now we don't need any additional "board" specific "machine_desc". TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta Cc: Arnd Bergmann Cc: Grant Likely Cc: devicetree-disc...@lists.ozlabs.org Cc: Rob Herring --- arch/arc/Kconfig|9 + arch/arc/Makefile |9 + arch/arc/boot/dts/Makefile | 14 arch/arc/boot/dts/skeleton.dts | 10 ++ arch/arc/boot/dts/skeleton.dtsi | 21 arch/arc/include/asm/prom.h | 15 arch/arc/include/asm/sections.h |1 + arch/arc/kernel/Makefile|2 + arch/arc/kernel/devtree.c | 69 +++ arch/arc/kernel/setup.c |9 + arch/arc/mm/init.c | 13 +++ 11 files changed, 172 insertions(+), 0 deletions(-) create mode 100644 arch/arc/boot/dts/Makefile create mode 100644 arch/arc/boot/dts/skeleton.dts create mode 100644 arch/arc/boot/dts/skeleton.dtsi create mode 100644 arch/arc/include/asm/prom.h create mode 100644 arch/arc/kernel/devtree.c diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index a353849..7666857 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -24,8 +24,11 @@ config ARC select GENERIC_SMP_IDLE_THREAD select HAVE_GENERIC_HARDIRQS select HAVE_MEMBLOCK + select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM + select OF + select OF_EARLY_FLATTREE config SCHED_OMIT_FRAME_POINTER def_bool y @@ -320,6 +323,12 @@ config CMDLINE_UBOOT to it. kernel startup code will copy the string into cmdline buffer and also append CONFIG_CMDLINE. +config ARC_BUILTIN_DTB_NAME + string "Built in DTB" + help + Set the name of the DTB to embed in the vmlinux binary + Leaving it blank selects the minimal "skeleton" dtb + source "kernel/Kconfig.preempt" endmenu # "ARC Architecture Configuration" diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 4d52a3b..90570f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -83,6 +83,9 @@ head-y:= arch/arc/kernel/head.o # See arch/arc/Kbuild for content of core part of the kernel core-y += arch/arc/ +# w/o this dtb won't embed into kernel binary +core-y += arch/arc/boot/dts/ + # w/o this ifneq, make ARCH=arc clean was crapping out ifneq ($(platform-y),) core-y += arch/arc/plat-$(PLATFORM)/ @@ -101,6 +104,12 @@ bootpImage: vmlinux uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +%.dtb %.dtb.S %.dtb.o: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + +dtbs: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 000..4a972a3 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,14 @@ +ifeq ($(CONFIG_OF),y) + +# Built-in dtb +builtindtb-y := skeleton + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"") + builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) +endif + +obj-y += $(patsubst "%",%,$(builtindtb-y)).dtb.o + +clean-files := *.dtb + +endif diff --git a/arch/arc/boot/dts/skeleton.dts b/arch/arc/boot/dts/skeleton.dts new file mode 100644 index 000..25a84fb --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dts @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "skeleton.dtsi" diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi new file mode 100644 index 000..9b357d8 --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + memory { device_type = "memory"; reg = <0 0>; }; +}; diff --git a/arch/arc/include/asm/prom.h b/arch/arc/include/asm/prom.h new file mode 100644 index 000..f54489b --- /dev/null +++ b/arch/arc/include/asm/prom.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This
[PATCH v3 32/71] ARC: [DeviceTree] Basic support
This is minimal infrastructure needed for devicetree work. It uses an a sample skeleton devicetree - embedded in kernel image - to print the board, manufacturer by parsing the top-level compatible string. As of now we don't need any additional board specific machine_desc. TODO: support interpreting the command line as boot-loader passed dtb Signed-off-by: Vineet Gupta vgu...@synopsys.com Cc: Arnd Bergmann a...@arndb.de Cc: Grant Likely grant.lik...@secretlab.ca Cc: devicetree-disc...@lists.ozlabs.org Cc: Rob Herring rob.herr...@calxeda.com --- arch/arc/Kconfig|9 + arch/arc/Makefile |9 + arch/arc/boot/dts/Makefile | 14 arch/arc/boot/dts/skeleton.dts | 10 ++ arch/arc/boot/dts/skeleton.dtsi | 21 arch/arc/include/asm/prom.h | 15 arch/arc/include/asm/sections.h |1 + arch/arc/kernel/Makefile|2 + arch/arc/kernel/devtree.c | 69 +++ arch/arc/kernel/setup.c |9 + arch/arc/mm/init.c | 13 +++ 11 files changed, 172 insertions(+), 0 deletions(-) create mode 100644 arch/arc/boot/dts/Makefile create mode 100644 arch/arc/boot/dts/skeleton.dts create mode 100644 arch/arc/boot/dts/skeleton.dtsi create mode 100644 arch/arc/include/asm/prom.h create mode 100644 arch/arc/kernel/devtree.c diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index a353849..7666857 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -24,8 +24,11 @@ config ARC select GENERIC_SMP_IDLE_THREAD select HAVE_GENERIC_HARDIRQS select HAVE_MEMBLOCK + select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM + select OF + select OF_EARLY_FLATTREE config SCHED_OMIT_FRAME_POINTER def_bool y @@ -320,6 +323,12 @@ config CMDLINE_UBOOT to it. kernel startup code will copy the string into cmdline buffer and also append CONFIG_CMDLINE. +config ARC_BUILTIN_DTB_NAME + string Built in DTB + help + Set the name of the DTB to embed in the vmlinux binary + Leaving it blank selects the minimal skeleton dtb + source kernel/Kconfig.preempt endmenu # ARC Architecture Configuration diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 4d52a3b..90570f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -83,6 +83,9 @@ head-y:= arch/arc/kernel/head.o # See arch/arc/Kbuild for content of core part of the kernel core-y += arch/arc/ +# w/o this dtb won't embed into kernel binary +core-y += arch/arc/boot/dts/ + # w/o this ifneq, make ARCH=arc clean was crapping out ifneq ($(platform-y),) core-y += arch/arc/plat-$(PLATFORM)/ @@ -101,6 +104,12 @@ bootpImage: vmlinux uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ +%.dtb %.dtb.S %.dtb.o: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + +dtbs: + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ + archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 000..4a972a3 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,14 @@ +ifeq ($(CONFIG_OF),y) + +# Built-in dtb +builtindtb-y := skeleton + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),) + builtindtb-y:= $(CONFIG_ARC_BUILTIN_DTB_NAME) +endif + +obj-y += $(patsubst %,%,$(builtindtb-y)).dtb.o + +clean-files := *.dtb + +endif diff --git a/arch/arc/boot/dts/skeleton.dts b/arch/arc/boot/dts/skeleton.dts new file mode 100644 index 000..25a84fb --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dts @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ skeleton.dtsi diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi new file mode 100644 index 000..9b357d8 --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. + */ + +/ { + compatible = snps,arc; + #address-cells = 1; + #size-cells = 1; + chosen { }; + aliases { }; + memory { device_type = memory; reg = 0 0; }; +}; diff --git a/arch/arc/include/asm/prom.h b/arch/arc/include/asm/prom.h new file mode 100644 index 000..f54489b --- /dev/null +++ b/arch/arc/include/asm/prom.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2012