[PATCH v5 07/24] clk: mediatek: Fix asymmetrical PLL enable and disable control
In fact, the en_mask is a combination of divider enable mask and pll enable bit(bit0). Before this patch, we enabled both divider mask and bit0 in prepare(), but only cleared the bit0 in unprepare(). In the future, we hope en_mask will only be used as divider enable mask. The enable register(CON0) will be set in 2 steps: first is divider mask, and then bit0 during prepare(), and vice versa. But considering backward compatibility, at this stage we allow en_mask to be a combination or a pure divider enable mask. And then we will make en_mask a pure divider enable mask in another following patch series. Signed-off-by: Weiyi Lu --- drivers/clk/mediatek/clk-pll.c | 20 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c index f440f2cd..11ed5d1 100644 --- a/drivers/clk/mediatek/clk-pll.c +++ b/drivers/clk/mediatek/clk-pll.c @@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw) { struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); u32 r; + u32 div_en_mask; r = readl(pll->pwr_addr) | CON0_PWR_ON; writel(r, pll->pwr_addr); @@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw) writel(r, pll->pwr_addr); udelay(1); - r = readl(pll->base_addr + REG_CON0); - r |= pll->data->en_mask; + r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN; writel(r, pll->base_addr + REG_CON0); + div_en_mask = pll->data->en_mask & ~CON0_BASE_EN; + if (div_en_mask) { + r = readl(pll->base_addr + REG_CON0) | div_en_mask; + writel(r, pll->base_addr + REG_CON0); + } + __mtk_pll_tuner_enable(pll); udelay(20); @@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw) { struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); u32 r; + u32 div_en_mask; if (pll->data->flags & HAVE_RST_BAR) { r = readl(pll->base_addr + REG_CON0); @@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw) __mtk_pll_tuner_disable(pll); - r = readl(pll->base_addr + REG_CON0); - r &= ~CON0_BASE_EN; + div_en_mask = pll->data->en_mask & ~CON0_BASE_EN; + if (div_en_mask) { + r = readl(pll->base_addr + REG_CON0) & ~div_en_mask; + writel(r, pll->base_addr + REG_CON0); + } + + r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN; writel(r, pll->base_addr + REG_CON0); r = readl(pll->pwr_addr) | CON0_ISO_EN; -- 1.8.1.1.dirty
Re: [PATCH v5 07/24] clk: mediatek: Fix asymmetrical PLL enable and disable control
On Mon, Nov 09, 2020 at 10:03:32AM +0800, Weiyi Lu wrote: > In fact, the en_mask is a combination of divider enable mask > and pll enable bit(bit0). > Before this patch, we enabled both divider mask and bit0 in prepare(), > but only cleared the bit0 in unprepare(). > In the future, we hope en_mask will only be used as divider enable mask. > The enable register(CON0) will be set in 2 steps: > first is divider mask, and then bit0 during prepare(), and vice versa. > But considering backward compatibility, at this stage we allow en_mask > to be a combination or a pure divider enable mask. > And then we will make en_mask a pure divider enable mask in another > following patch series. I have a question on this: Are there any possible problems on controlling divider_en and bit0 at the same time? Or is this only for cleanups? If mtk_pll_data::en_mask is not allowed to control with bit0 together, I guess register_pll() also needs to check en_mask::bit0 is cleared? > > Signed-off-by: Weiyi Lu > --- > drivers/clk/mediatek/clk-pll.c | 20 > 1 file changed, 16 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c > index f440f2cd..11ed5d1 100644 > --- a/drivers/clk/mediatek/clk-pll.c > +++ b/drivers/clk/mediatek/clk-pll.c > @@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw) > { > struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); > u32 r; > + u32 div_en_mask; > > r = readl(pll->pwr_addr) | CON0_PWR_ON; > writel(r, pll->pwr_addr); > @@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw) > writel(r, pll->pwr_addr); > udelay(1); > > - r = readl(pll->base_addr + REG_CON0); > - r |= pll->data->en_mask; > + r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN; > writel(r, pll->base_addr + REG_CON0); > > + div_en_mask = pll->data->en_mask & ~CON0_BASE_EN; > + if (div_en_mask) { > + r = readl(pll->base_addr + REG_CON0) | div_en_mask; > + writel(r, pll->base_addr + REG_CON0); > + } > + > __mtk_pll_tuner_enable(pll); > > udelay(20); > @@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw) > { > struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); > u32 r; > + u32 div_en_mask; > > if (pll->data->flags & HAVE_RST_BAR) { > r = readl(pll->base_addr + REG_CON0); > @@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw) > > __mtk_pll_tuner_disable(pll); > > - r = readl(pll->base_addr + REG_CON0); > - r &= ~CON0_BASE_EN; > + div_en_mask = pll->data->en_mask & ~CON0_BASE_EN; > + if (div_en_mask) { > + r = readl(pll->base_addr + REG_CON0) & ~div_en_mask; > + writel(r, pll->base_addr + REG_CON0); > + } > + > + r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN; > writel(r, pll->base_addr + REG_CON0); > > r = readl(pll->pwr_addr) | CON0_ISO_EN; > -- > 1.8.1.1.dirty > ___ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v5 07/24] clk: mediatek: Fix asymmetrical PLL enable and disable control
On Wed, 2020-11-18 at 11:55 +0800, Ikjoon Jang wrote: > On Mon, Nov 09, 2020 at 10:03:32AM +0800, Weiyi Lu wrote: > > In fact, the en_mask is a combination of divider enable mask > > and pll enable bit(bit0). > > Before this patch, we enabled both divider mask and bit0 in prepare(), > > but only cleared the bit0 in unprepare(). > > In the future, we hope en_mask will only be used as divider enable mask. > > The enable register(CON0) will be set in 2 steps: > > first is divider mask, and then bit0 during prepare(), and vice versa. > > But considering backward compatibility, at this stage we allow en_mask > > to be a combination or a pure divider enable mask. > > And then we will make en_mask a pure divider enable mask in another > > following patch series. > > I have a question on this: Are there any possible problems on controlling > divider_en and bit0 at the same time? Or is this only for cleanups? > Yes, this is only for cleanups and controlling divider_en and bit0 at the same time will not cause any problem. > If mtk_pll_data::en_mask is not allowed to control with bit0 together, > I guess register_pll() also needs to check en_mask::bit0 is cleared? > > > > > Signed-off-by: Weiyi Lu > > --- > > drivers/clk/mediatek/clk-pll.c | 20 > > 1 file changed, 16 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c > > index f440f2cd..11ed5d1 100644 > > --- a/drivers/clk/mediatek/clk-pll.c > > +++ b/drivers/clk/mediatek/clk-pll.c > > @@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw) > > { > > struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); > > u32 r; > > + u32 div_en_mask; > > > > r = readl(pll->pwr_addr) | CON0_PWR_ON; > > writel(r, pll->pwr_addr); > > @@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw) > > writel(r, pll->pwr_addr); > > udelay(1); > > > > - r = readl(pll->base_addr + REG_CON0); > > - r |= pll->data->en_mask; > > + r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN; > > writel(r, pll->base_addr + REG_CON0); > > > > + div_en_mask = pll->data->en_mask & ~CON0_BASE_EN; > > + if (div_en_mask) { > > + r = readl(pll->base_addr + REG_CON0) | div_en_mask; > > + writel(r, pll->base_addr + REG_CON0); > > + } > > + > > __mtk_pll_tuner_enable(pll); > > > > udelay(20); > > @@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw) > > { > > struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); > > u32 r; > > + u32 div_en_mask; > > > > if (pll->data->flags & HAVE_RST_BAR) { > > r = readl(pll->base_addr + REG_CON0); > > @@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw) > > > > __mtk_pll_tuner_disable(pll); > > > > - r = readl(pll->base_addr + REG_CON0); > > - r &= ~CON0_BASE_EN; > > + div_en_mask = pll->data->en_mask & ~CON0_BASE_EN; > > + if (div_en_mask) { > > + r = readl(pll->base_addr + REG_CON0) & ~div_en_mask; > > + writel(r, pll->base_addr + REG_CON0); > > + } > > + > > + r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN; > > writel(r, pll->base_addr + REG_CON0); > > > > r = readl(pll->pwr_addr) | CON0_ISO_EN; > > -- > > 1.8.1.1.dirty > > ___ > > linux-arm-kernel mailing list > > linux-arm-ker...@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel