Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
On Mon, 2019-10-21 at 11:34 +0800, Jason Yan wrote: > > On 2019/10/10 2:46, Scott Wood wrote: > > On Wed, 2019-10-09 at 16:41 +0800, Jason Yan wrote: > > > Hi Scott, > > > > > > On 2019/10/9 15:13, Scott Wood wrote: > > > > On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote: > > > > > Hi Scott, > > > > > > > > > > Would you please take sometime to test this? > > > > > > > > > > Thank you so much. > > > > > > > > > > On 2019/9/24 13:52, Jason Yan wrote: > > > > > > Hi Scott, > > > > > > > > > > > > Can you test v7 to see if it works to load a kernel at a non-zero > > > > > > address? > > > > > > > > > > > > Thanks, > > > > > > > > Sorry for the delay. Here's the output: > > > > > > > > > > Thanks for the test. > > > > > > > ## Booting kernel from Legacy Image at 1000 ... > > > > Image Name: Linux-5.4.0-rc2-00050-g8ac2cf5b4 > > > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > > > Data Size:7521134 Bytes = 7.2 MiB > > > > Load Address: 0400 > > > > Entry Point: 0400 > > > > Verifying Checksum ... OK > > > > ## Flattened Device Tree blob at 1fc0 > > > > Booting using the fdt blob at 0x1fc0 > > > > Uncompressing Kernel Image ... OK > > > > Loading Device Tree to 07fe, end 07fff65c ... OK > > > > KASLR: No safe seed for randomizing the kernel base. > > > > OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman- > > > > fqd > > > > OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman- > > > > pfdr > > > > OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman- > > > > fbpr > > > > Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb > > > > > > When boot from 0400, the max CAM value is 64M. And > > > you have a board with 12G memory, CONFIG_LOWMEM_CAM_NUM=3 means only > > > 192M memory is mapped and when kernel is randomized at the middle of > > > this 192M memory, we will not have enough continuous memory for node > > > map. > > > > > > Can you set CONFIG_LOWMEM_CAM_NUM=8 and see if it works? > > > > OK, that worked. > > > > Hi Scott, any more cases should be tested or any more comments? > What else need to be done before this feature can be merged? I've just applied it and sent a pull request. -Scott
Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
On 2019/10/10 2:46, Scott Wood wrote: On Wed, 2019-10-09 at 16:41 +0800, Jason Yan wrote: Hi Scott, On 2019/10/9 15:13, Scott Wood wrote: On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote: Hi Scott, Would you please take sometime to test this? Thank you so much. On 2019/9/24 13:52, Jason Yan wrote: Hi Scott, Can you test v7 to see if it works to load a kernel at a non-zero address? Thanks, Sorry for the delay. Here's the output: Thanks for the test. ## Booting kernel from Legacy Image at 1000 ... Image Name: Linux-5.4.0-rc2-00050-g8ac2cf5b4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size:7521134 Bytes = 7.2 MiB Load Address: 0400 Entry Point: 0400 Verifying Checksum ... OK ## Flattened Device Tree blob at 1fc0 Booting using the fdt blob at 0x1fc0 Uncompressing Kernel Image ... OK Loading Device Tree to 07fe, end 07fff65c ... OK KASLR: No safe seed for randomizing the kernel base. OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb When boot from 0400, the max CAM value is 64M. And you have a board with 12G memory, CONFIG_LOWMEM_CAM_NUM=3 means only 192M memory is mapped and when kernel is randomized at the middle of this 192M memory, we will not have enough continuous memory for node map. Can you set CONFIG_LOWMEM_CAM_NUM=8 and see if it works? OK, that worked. Hi Scott, any more cases should be tested or any more comments? What else need to be done before this feature can be merged? Thanks, Jason -Scott .
Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
On Wed, 2019-10-09 at 16:41 +0800, Jason Yan wrote: > Hi Scott, > > On 2019/10/9 15:13, Scott Wood wrote: > > On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote: > > > Hi Scott, > > > > > > Would you please take sometime to test this? > > > > > > Thank you so much. > > > > > > On 2019/9/24 13:52, Jason Yan wrote: > > > > Hi Scott, > > > > > > > > Can you test v7 to see if it works to load a kernel at a non-zero > > > > address? > > > > > > > > Thanks, > > > > Sorry for the delay. Here's the output: > > > > Thanks for the test. > > > ## Booting kernel from Legacy Image at 1000 ... > > Image Name: Linux-5.4.0-rc2-00050-g8ac2cf5b4 > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size:7521134 Bytes = 7.2 MiB > > Load Address: 0400 > > Entry Point: 0400 > > Verifying Checksum ... OK > > ## Flattened Device Tree blob at 1fc0 > > Booting using the fdt blob at 0x1fc0 > > Uncompressing Kernel Image ... OK > > Loading Device Tree to 07fe, end 07fff65c ... OK > > KASLR: No safe seed for randomizing the kernel base. > > OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd > > OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr > > OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr > > Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb > > When boot from 0400, the max CAM value is 64M. And > you have a board with 12G memory, CONFIG_LOWMEM_CAM_NUM=3 means only > 192M memory is mapped and when kernel is randomized at the middle of > this 192M memory, we will not have enough continuous memory for node map. > > Can you set CONFIG_LOWMEM_CAM_NUM=8 and see if it works? OK, that worked. -Scott
Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
Hi Scott, On 2019/10/9 15:13, Scott Wood wrote: On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote: Hi Scott, Would you please take sometime to test this? Thank you so much. On 2019/9/24 13:52, Jason Yan wrote: Hi Scott, Can you test v7 to see if it works to load a kernel at a non-zero address? Thanks, Sorry for the delay. Here's the output: Thanks for the test. ## Booting kernel from Legacy Image at 1000 ... Image Name: Linux-5.4.0-rc2-00050-g8ac2cf5b4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size:7521134 Bytes = 7.2 MiB Load Address: 0400 Entry Point: 0400 Verifying Checksum ... OK ## Flattened Device Tree blob at 1fc0 Booting using the fdt blob at 0x1fc0 Uncompressing Kernel Image ... OK Loading Device Tree to 07fe, end 07fff65c ... OK KASLR: No safe seed for randomizing the kernel base. OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb When boot from 0400, the max CAM value is 64M. And you have a board with 12G memory, CONFIG_LOWMEM_CAM_NUM=3 means only 192M memory is mapped and when kernel is randomized at the middle of this 192M memory, we will not have enough continuous memory for node map. Can you set CONFIG_LOWMEM_CAM_NUM=8 and see if it works? Thanks. Linux version 5.4.0-rc2-00050-g8ac2cf5b4e4a-dirty (scott@snotra) (gcc version 8. 1.0 (GCC)) #26 SMP Wed Oct 9 01:50:40 CDT 2019 Using CoreNet Generic machine description printk: bootconsole [udbg0] enabled CPU maps initialized for 1 thread per core - phys_mem_size = 0x2fc00 dcache_bsize = 0x40 icache_bsize = 0x40 cpu_features = 0x03b4 possible= 0x010103bc always = 0x0020 cpu_user_features = 0x8c008000 0x0800 mmu_features = 0x000a0010 physical_start= 0xc7c4000 - CoreNet Generic board mpc85xx_qe_init: Could not find Quicc Engine node barrier-nospec: using isync; sync as speculation barrier Zone ranges: Normal [mem 0x0400-0x0fff] HighMem [mem 0x1000-0x0002] Movable zone start for each node Early memory node ranges node 0: [mem 0x0400-0x0002] Initmem setup node 0 [mem 0x0400-0x0002] Kernel panic - not syncing: Failed to allocate 125173760 bytes for node 0 memory map CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc2-00050-g8ac2cf5b4e4a-dirty #26 Call Trace: [c989fe10] [c924bfb0] dump_stack+0x84/0xb4 (unreliable) [c989fe30] [c880badc] panic+0x140/0x334 [c989fe90] [c89a1144] alloc_node_mem_map.constprop.117+0xa0/0x11c [c989feb0] [c95481c4] free_area_init_node+0x314/0x5b8 [c989ff30] [c9548b34] free_area_init_nodes+0x57c/0x5c0 [c989ff80] [c952cbb4] setup_arch+0x250/0x270 [c989ffa0] [c95278e0] start_kernel+0x74/0x4e8 [c989fff0] [c87c4478] set_ivor+0x150/0x18c Kernel Offset: 0x87c4000 from 0xc000 Rebooting in 180 seconds.. -Scott .
Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
On Wed, 2019-10-09 at 14:10 +0800, Jason Yan wrote: > Hi Scott, > > Would you please take sometime to test this? > > Thank you so much. > > On 2019/9/24 13:52, Jason Yan wrote: > > Hi Scott, > > > > Can you test v7 to see if it works to load a kernel at a non-zero address? > > > > Thanks, Sorry for the delay. Here's the output: ## Booting kernel from Legacy Image at 1000 ... Image Name: Linux-5.4.0-rc2-00050-g8ac2cf5b4 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size:7521134 Bytes = 7.2 MiB Load Address: 0400 Entry Point: 0400 Verifying Checksum ... OK ## Flattened Device Tree blob at 1fc0 Booting using the fdt blob at 0x1fc0 Uncompressing Kernel Image ... OK Loading Device Tree to 07fe, end 07fff65c ... OK KASLR: No safe seed for randomizing the kernel base. OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr Memory CAM mapping: 64/64/64 Mb, residual: 12032Mb Linux version 5.4.0-rc2-00050-g8ac2cf5b4e4a-dirty (scott@snotra) (gcc version 8. 1.0 (GCC)) #26 SMP Wed Oct 9 01:50:40 CDT 2019 Using CoreNet Generic machine description printk: bootconsole [udbg0] enabled CPU maps initialized for 1 thread per core - phys_mem_size = 0x2fc00 dcache_bsize = 0x40 icache_bsize = 0x40 cpu_features = 0x03b4 possible= 0x010103bc always = 0x0020 cpu_user_features = 0x8c008000 0x0800 mmu_features = 0x000a0010 physical_start= 0xc7c4000 - CoreNet Generic board mpc85xx_qe_init: Could not find Quicc Engine node barrier-nospec: using isync; sync as speculation barrier Zone ranges: Normal [mem 0x0400-0x0fff] HighMem [mem 0x1000-0x0002] Movable zone start for each node Early memory node ranges node 0: [mem 0x0400-0x0002] Initmem setup node 0 [mem 0x0400-0x0002] Kernel panic - not syncing: Failed to allocate 125173760 bytes for node 0 memory map CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc2-00050-g8ac2cf5b4e4a-dirty #26 Call Trace: [c989fe10] [c924bfb0] dump_stack+0x84/0xb4 (unreliable) [c989fe30] [c880badc] panic+0x140/0x334 [c989fe90] [c89a1144] alloc_node_mem_map.constprop.117+0xa0/0x11c [c989feb0] [c95481c4] free_area_init_node+0x314/0x5b8 [c989ff30] [c9548b34] free_area_init_nodes+0x57c/0x5c0 [c989ff80] [c952cbb4] setup_arch+0x250/0x270 [c989ffa0] [c95278e0] start_kernel+0x74/0x4e8 [c989fff0] [c87c4478] set_ivor+0x150/0x18c Kernel Offset: 0x87c4000 from 0xc000 Rebooting in 180 seconds.. -Scott
Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
Hi Scott, Would you please take sometime to test this? Thank you so much. On 2019/9/24 13:52, Jason Yan wrote: Hi Scott, Can you test v7 to see if it works to load a kernel at a non-zero address? Thanks, On 2019/9/20 17:45, Jason Yan wrote: This series implements KASLR for powerpc/fsl_booke/32, as a security feature that deters exploit attempts relying on knowledge of the location of kernel internals. Since CONFIG_RELOCATABLE has already supported, what we need to do is map or copy kernel to a proper place and relocate. Freescale Book-E parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1 entries are not suitable to map the kernel directly in a randomized region, so we chose to copy the kernel to a proper place and restart to relocate. Entropy is derived from the banner and timer base, which will change every build and boot. This not so much safe so additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. We will use the first 512M of the low memory to randomize the kernel image. The memory will be split in 64M zones. We will use the lower 8 bit of the entropy to decide the index of the 64M zone. Then we chose a 16K aligned offset inside the 64M zone to put the kernel in. KERNELBASE |--> 64M <--| | | +---+ ++---+ | || |kernel| | | +---+ ++---+ | | |-> offset <-| kernstart_virt_addr We also check if we will overlap with some areas like the dtb area, the initrd area or the crashkernel area. If we cannot find a proper area, kaslr will be disabled and boot from the original kernel. Changes since v6: - Rename create_tlb_entry() to create_kaslr_tlb_entry() - Remove MAS2_VAL since there is no more users. - Move kaslr_booke.c to arch/powerpc/mm/nohash. - Call flush_icache_range() after copying the kernel. - Warning if no kaslr-seed provided by the bootloader - Use the right physical address when checking if the new position will overlap with other regions. - Do not clear bss for the second pass because some global variables will not be initialized again - Use tabs instead of spaces between the mnemonic and the arguments(in fsl_booke_entry_mapping.S). Changes since v5: - Rename M_IF_NEEDED to MAS2_M_IF_NEEDED - Define some global variable as __ro_after_init - Replace kimage_vaddr with kernstart_virt_addr - Depend on RELOCATABLE, not select it - Modify the comment block below the SPDX tag - Remove some useless headers in kaslr_booke.c and move is_second_reloc declarationto mmu_decl.h - Remove DBG() and use pr_debug() and rewrite comment above get_boot_seed(). - Add a patch to document the KASLR implementation. - Split a patch from patch #10 which exports kaslr offset in VMCOREINFO ELF notes. - Remove extra logic around finding nokaslr string in cmdline. - Make regions static global and __initdata Changes since v4: - Add Reviewed-by tag from Christophe - Remove an unnecessary cast - Remove unnecessary parenthesis - Fix checkpatch warning Changes since v3: - Add Reviewed-by and Tested-by tag from Diana - Change the comment in fsl_booke_entry_mapping.S to be consistent with the new code. Changes since v2: - Remove unnecessary #ifdef - Use SZ_64M instead of0x400 - Call early_init_dt_scan_chosen() to init boot_command_line - Rename kaslr_second_init() to kaslr_late_init() Changes since v1: - Remove some useless 'extern' keyword. - Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL - Improve some assembly code - Use memzero_explicit instead of memset - Use boot_command_line and remove early_command_line - Do not print kaslr offset if kaslr is disabled Jason Yan (12): powerpc: unify definition of M_IF_NEEDED powerpc: move memstart_addr and kernstart_addr to init-common.c powerpc: introduce kernstart_virt_addr to store the kernel base powerpc/fsl_booke/32: introduce create_kaslr_tlb_entry() helper powerpc/fsl_booke/32: introduce reloc_kernel_entry() helper powerpc/fsl_booke/32: implement KASLR infrastructure powerpc/fsl_booke/32: randomize the kernel image offset powerpc/fsl_booke/kaslr: clear the original kernel if randomized powerpc/fsl_booke/kaslr: support nokaslr cmdline parameter powerpc/fsl_booke/kaslr: dump out kernel offset information on panic powerpc/fsl_booke/kaslr: export offset in VMCOREINFO ELF notes powerpc/fsl_booke/32: Document KASLR implementation Documentation/powerpc/kaslr-booke32.rst | 42 ++ arch/powerpc/Kconfig | 11 + arch/powerpc/include/asm/nohash/mmu-book3e.h | 11 +- arch/powerpc/include/asm/page.h | 7 + arch/powerpc/kernel/early_32.c | 5 +-
Re: [PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
Hi Scott, Can you test v7 to see if it works to load a kernel at a non-zero address? Thanks, On 2019/9/20 17:45, Jason Yan wrote: This series implements KASLR for powerpc/fsl_booke/32, as a security feature that deters exploit attempts relying on knowledge of the location of kernel internals. Since CONFIG_RELOCATABLE has already supported, what we need to do is map or copy kernel to a proper place and relocate. Freescale Book-E parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1 entries are not suitable to map the kernel directly in a randomized region, so we chose to copy the kernel to a proper place and restart to relocate. Entropy is derived from the banner and timer base, which will change every build and boot. This not so much safe so additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. We will use the first 512M of the low memory to randomize the kernel image. The memory will be split in 64M zones. We will use the lower 8 bit of the entropy to decide the index of the 64M zone. Then we chose a 16K aligned offset inside the 64M zone to put the kernel in. KERNELBASE |--> 64M <--| | | +---+++---+ | |||kernel|| | +---+++---+ | | |-> offset<-| kernstart_virt_addr We also check if we will overlap with some areas like the dtb area, the initrd area or the crashkernel area. If we cannot find a proper area, kaslr will be disabled and boot from the original kernel. Changes since v6: - Rename create_tlb_entry() to create_kaslr_tlb_entry() - Remove MAS2_VAL since there is no more users. - Move kaslr_booke.c to arch/powerpc/mm/nohash. - Call flush_icache_range() after copying the kernel. - Warning if no kaslr-seed provided by the bootloader - Use the right physical address when checking if the new position will overlap with other regions. - Do not clear bss for the second pass because some global variables will not be initialized again - Use tabs instead of spaces between the mnemonic and the arguments(in fsl_booke_entry_mapping.S). Changes since v5: - Rename M_IF_NEEDED to MAS2_M_IF_NEEDED - Define some global variable as __ro_after_init - Replace kimage_vaddr with kernstart_virt_addr - Depend on RELOCATABLE, not select it - Modify the comment block below the SPDX tag - Remove some useless headers in kaslr_booke.c and move is_second_reloc declarationto mmu_decl.h - Remove DBG() and use pr_debug() and rewrite comment above get_boot_seed(). - Add a patch to document the KASLR implementation. - Split a patch from patch #10 which exports kaslr offset in VMCOREINFO ELF notes. - Remove extra logic around finding nokaslr string in cmdline. - Make regions static global and __initdata Changes since v4: - Add Reviewed-by tag from Christophe - Remove an unnecessary cast - Remove unnecessary parenthesis - Fix checkpatch warning Changes since v3: - Add Reviewed-by and Tested-by tag from Diana - Change the comment in fsl_booke_entry_mapping.S to be consistent with the new code. Changes since v2: - Remove unnecessary #ifdef - Use SZ_64M instead of0x400 - Call early_init_dt_scan_chosen() to init boot_command_line - Rename kaslr_second_init() to kaslr_late_init() Changes since v1: - Remove some useless 'extern' keyword. - Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL - Improve some assembly code - Use memzero_explicit instead of memset - Use boot_command_line and remove early_command_line - Do not print kaslr offset if kaslr is disabled Jason Yan (12): powerpc: unify definition of M_IF_NEEDED powerpc: move memstart_addr and kernstart_addr to init-common.c powerpc: introduce kernstart_virt_addr to store the kernel base powerpc/fsl_booke/32: introduce create_kaslr_tlb_entry() helper powerpc/fsl_booke/32: introduce reloc_kernel_entry() helper powerpc/fsl_booke/32: implement KASLR infrastructure powerpc/fsl_booke/32: randomize the kernel image offset powerpc/fsl_booke/kaslr: clear the original kernel if randomized powerpc/fsl_booke/kaslr: support nokaslr cmdline parameter powerpc/fsl_booke/kaslr: dump out kernel offset information on panic powerpc/fsl_booke/kaslr: export offset in VMCOREINFO ELF notes powerpc/fsl_booke/32: Document KASLR implementation Documentation/powerpc/kaslr-booke32.rst | 42 ++ arch/powerpc/Kconfig | 11 + arch/powerpc/include/asm/nohash/mmu-book3e.h | 11 +- arch/powerpc/include/asm/page.h | 7 + arch/powerpc/kernel/early_32.c| 5 +- arch/powerpc/kernel/exceptions-64e.S | 12 +- arch/powerpc/kernel/fsl_booke_entry_mapping.S | 25 +-
[PATCH v7 00/12] implement KASLR for powerpc/fsl_booke/32
This series implements KASLR for powerpc/fsl_booke/32, as a security feature that deters exploit attempts relying on knowledge of the location of kernel internals. Since CONFIG_RELOCATABLE has already supported, what we need to do is map or copy kernel to a proper place and relocate. Freescale Book-E parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1 entries are not suitable to map the kernel directly in a randomized region, so we chose to copy the kernel to a proper place and restart to relocate. Entropy is derived from the banner and timer base, which will change every build and boot. This not so much safe so additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. We will use the first 512M of the low memory to randomize the kernel image. The memory will be split in 64M zones. We will use the lower 8 bit of the entropy to decide the index of the 64M zone. Then we chose a 16K aligned offset inside the 64M zone to put the kernel in. KERNELBASE |--> 64M <--| | | +---+++---+ | |||kernel|| | +---+++---+ | | |-> offset<-| kernstart_virt_addr We also check if we will overlap with some areas like the dtb area, the initrd area or the crashkernel area. If we cannot find a proper area, kaslr will be disabled and boot from the original kernel. Changes since v6: - Rename create_tlb_entry() to create_kaslr_tlb_entry() - Remove MAS2_VAL since there is no more users. - Move kaslr_booke.c to arch/powerpc/mm/nohash. - Call flush_icache_range() after copying the kernel. - Warning if no kaslr-seed provided by the bootloader - Use the right physical address when checking if the new position will overlap with other regions. - Do not clear bss for the second pass because some global variables will not be initialized again - Use tabs instead of spaces between the mnemonic and the arguments(in fsl_booke_entry_mapping.S). Changes since v5: - Rename M_IF_NEEDED to MAS2_M_IF_NEEDED - Define some global variable as __ro_after_init - Replace kimage_vaddr with kernstart_virt_addr - Depend on RELOCATABLE, not select it - Modify the comment block below the SPDX tag - Remove some useless headers in kaslr_booke.c and move is_second_reloc declarationto mmu_decl.h - Remove DBG() and use pr_debug() and rewrite comment above get_boot_seed(). - Add a patch to document the KASLR implementation. - Split a patch from patch #10 which exports kaslr offset in VMCOREINFO ELF notes. - Remove extra logic around finding nokaslr string in cmdline. - Make regions static global and __initdata Changes since v4: - Add Reviewed-by tag from Christophe - Remove an unnecessary cast - Remove unnecessary parenthesis - Fix checkpatch warning Changes since v3: - Add Reviewed-by and Tested-by tag from Diana - Change the comment in fsl_booke_entry_mapping.S to be consistent with the new code. Changes since v2: - Remove unnecessary #ifdef - Use SZ_64M instead of0x400 - Call early_init_dt_scan_chosen() to init boot_command_line - Rename kaslr_second_init() to kaslr_late_init() Changes since v1: - Remove some useless 'extern' keyword. - Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL - Improve some assembly code - Use memzero_explicit instead of memset - Use boot_command_line and remove early_command_line - Do not print kaslr offset if kaslr is disabled Jason Yan (12): powerpc: unify definition of M_IF_NEEDED powerpc: move memstart_addr and kernstart_addr to init-common.c powerpc: introduce kernstart_virt_addr to store the kernel base powerpc/fsl_booke/32: introduce create_kaslr_tlb_entry() helper powerpc/fsl_booke/32: introduce reloc_kernel_entry() helper powerpc/fsl_booke/32: implement KASLR infrastructure powerpc/fsl_booke/32: randomize the kernel image offset powerpc/fsl_booke/kaslr: clear the original kernel if randomized powerpc/fsl_booke/kaslr: support nokaslr cmdline parameter powerpc/fsl_booke/kaslr: dump out kernel offset information on panic powerpc/fsl_booke/kaslr: export offset in VMCOREINFO ELF notes powerpc/fsl_booke/32: Document KASLR implementation Documentation/powerpc/kaslr-booke32.rst | 42 ++ arch/powerpc/Kconfig | 11 + arch/powerpc/include/asm/nohash/mmu-book3e.h | 11 +- arch/powerpc/include/asm/page.h | 7 + arch/powerpc/kernel/early_32.c| 5 +- arch/powerpc/kernel/exceptions-64e.S | 12 +- arch/powerpc/kernel/fsl_booke_entry_mapping.S | 25 +- arch/powerpc/kernel/head_fsl_booke.S | 61 ++- arch/powerpc/kernel/machine_kexec.c | 1 + arch/powerpc/kernel/misc_64.S | 7 +- arch/powerpc/kernel/setup-common.c|