Re: [PATCH v8 0/9] Tegra xHCI support
Hi Jassi, On Mon, May 11, 2015 at 8:56 PM, Jassi Brar wrote: > Applied patches 2, 3, 6 & 7 Please drop patches 6 and 7. Lee Jones has NAK'ed the MFD driver, so I'll have to re-spin this series without using an MFD. Thanks, andrew -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v8 0/9] Tegra xHCI support
Hi Jassi, On Mon, May 11, 2015 at 8:56 PM, Jassi Brar jassisinghb...@gmail.com wrote: Applied patches 2, 3, 6 7 Please drop patches 6 and 7. Lee Jones has NAK'ed the MFD driver, so I'll have to re-spin this series without using an MFD. Thanks, andrew -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v8 0/9] Tegra xHCI support
On Mon, May 4, 2015 at 11:06 PM, Andrew Bresticker wrote: > This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: > - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, > - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, > - patches 6 and 7: adding a driver for the mailbox used to communicate >with the xHCI controller's firmware, and > - patches 8 and 9: adding a xHCI host-controller driver. > > The addition of USB PHY support to the XUSB padctl driver has been dropped. > Thierry will be posting those patches later. > > Given the many compile and run-time dependencies in this series, it is > probably > best if the first 3 patches are picked up by the relevant maintainers in topic > branches so that the remainder of the series can go through the Tegra tree. > > Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory > sticks and ethernet dongles. This has also been tested, with additional > out-of-tree patches, on Tegra132 and Tegra210 based boards. > > Based on v4.1-rc2. A branch with the entire series is available at: > https://github.com/abrestic/linux/tree/tegra-xhci-v8 > > Cc: Jon Hunter > > Changes from v7: > - Move non-shared resources into child nodes of MFD. > - Fixed a couple of mailbox driver bugs. > > Changes from v6: > - Dropped PHY changes from series. Will be posted later by Thierry. > - Added an MFD device with the mailbox and xHCI host as sub-devices. > > Changes from v5: > - Addressed review comments from Jassi and Felipe. > > Changes from v4: > - Made USB support optional in padctl driver. > - Made usb3-port a pinconfig property again. > - Cleaned up mbox_request_channel() error handling and allowed it to defer >probing (patch 3). > - Minor xHCI (patch 1) and mailbox framework (patch 2) cleanups suggested >by Thierry. > - Addressed Thierry's review comments. > > Changes from v3: > - Fixed USB2.0 flakiness on Jetson-TK1. > - Switched to 32-bit DMA mask for host. > - Addressed Stephen's review comments. > > Chagnes from v2: > - Dropped mailbox channel specifier. The mailbox driver allocates virtual >channels backed by the single physical channel. > - Added support for HS_CURR_LEVEL adjustment pinconfig property, which >will be required for the Blaze board. > - Addressed Stephen's review comments. > > Changes from v1: > - Converted mailbox driver to use the common mailbox framework. > - Fixed up host driver so that it can now be built and used as a module. > - Addressed Stephen's review comments. > - Misc. cleanups. > > Andrew Bresticker (8): > xhci: Set shared HCD's hcd_priv in xhci_gen_setup > mailbox: Make mbox_chan_ops const > mfd: Add binding document for NVIDIA Tegra XUSB > mfd: Add driver for NVIDIA Tegra XUSB > mailbox: Add NVIDIA Tegra XUSB mailbox binding > mailbox: Add NVIDIA Tegra XUSB mailbox driver > usb: Add NVIDIA Tegra xHCI controller binding > usb: xhci: Add NVIDIA Tegra xHCI host-controller driver > > Benson Leung (1): > mailbox: Fix up error handling in mbox_request_channel() > > .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 32 + > .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 + > .../bindings/usb/nvidia,tegra124-xhci.txt | 96 +++ > drivers/mailbox/Kconfig| 8 + > drivers/mailbox/Makefile | 2 + > drivers/mailbox/arm_mhu.c | 2 +- > drivers/mailbox/mailbox-altera.c | 2 +- > drivers/mailbox/mailbox.c | 11 +- > drivers/mailbox/omap-mailbox.c | 8 +- > drivers/mailbox/pcc.c | 2 +- > drivers/mailbox/tegra-xusb-mailbox.c | 290 +++ > drivers/mfd/Kconfig| 7 + > drivers/mfd/Makefile | 1 + > drivers/mfd/tegra-xusb.c | 75 ++ > drivers/usb/host/Kconfig | 10 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/xhci-pci.c| 5 - > drivers/usb/host/xhci-plat.c | 5 - > drivers/usb/host/xhci-tegra.c | 947 > + > drivers/usb/host/xhci.c| 6 +- > include/linux/mailbox_controller.h | 2 +- > include/soc/tegra/xusb.h | 43 + > 22 files changed, 1568 insertions(+), 24 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt > create mode 100644 > Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt > create mode 100644 > Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt > create mode 100644 drivers/mailbox/tegra-xusb-mailbox.c > create mode 100644 drivers/mfd/tegra-xusb.c > create mode 100644 drivers/usb/host/xhci-tegra.c >
Re: [PATCH v8 0/9] Tegra xHCI support
On Mon, May 4, 2015 at 11:06 PM, Andrew Bresticker abres...@chromium.org wrote: This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, - patches 6 and 7: adding a driver for the mailbox used to communicate with the xHCI controller's firmware, and - patches 8 and 9: adding a xHCI host-controller driver. The addition of USB PHY support to the XUSB padctl driver has been dropped. Thierry will be posting those patches later. Given the many compile and run-time dependencies in this series, it is probably best if the first 3 patches are picked up by the relevant maintainers in topic branches so that the remainder of the series can go through the Tegra tree. Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory sticks and ethernet dongles. This has also been tested, with additional out-of-tree patches, on Tegra132 and Tegra210 based boards. Based on v4.1-rc2. A branch with the entire series is available at: https://github.com/abrestic/linux/tree/tegra-xhci-v8 Cc: Jon Hunter jonath...@nvidia.com Changes from v7: - Move non-shared resources into child nodes of MFD. - Fixed a couple of mailbox driver bugs. Changes from v6: - Dropped PHY changes from series. Will be posted later by Thierry. - Added an MFD device with the mailbox and xHCI host as sub-devices. Changes from v5: - Addressed review comments from Jassi and Felipe. Changes from v4: - Made USB support optional in padctl driver. - Made usb3-port a pinconfig property again. - Cleaned up mbox_request_channel() error handling and allowed it to defer probing (patch 3). - Minor xHCI (patch 1) and mailbox framework (patch 2) cleanups suggested by Thierry. - Addressed Thierry's review comments. Changes from v3: - Fixed USB2.0 flakiness on Jetson-TK1. - Switched to 32-bit DMA mask for host. - Addressed Stephen's review comments. Chagnes from v2: - Dropped mailbox channel specifier. The mailbox driver allocates virtual channels backed by the single physical channel. - Added support for HS_CURR_LEVEL adjustment pinconfig property, which will be required for the Blaze board. - Addressed Stephen's review comments. Changes from v1: - Converted mailbox driver to use the common mailbox framework. - Fixed up host driver so that it can now be built and used as a module. - Addressed Stephen's review comments. - Misc. cleanups. Andrew Bresticker (8): xhci: Set shared HCD's hcd_priv in xhci_gen_setup mailbox: Make mbox_chan_ops const mfd: Add binding document for NVIDIA Tegra XUSB mfd: Add driver for NVIDIA Tegra XUSB mailbox: Add NVIDIA Tegra XUSB mailbox binding mailbox: Add NVIDIA Tegra XUSB mailbox driver usb: Add NVIDIA Tegra xHCI controller binding usb: xhci: Add NVIDIA Tegra xHCI host-controller driver Benson Leung (1): mailbox: Fix up error handling in mbox_request_channel() .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 32 + .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 + .../bindings/usb/nvidia,tegra124-xhci.txt | 96 +++ drivers/mailbox/Kconfig| 8 + drivers/mailbox/Makefile | 2 + drivers/mailbox/arm_mhu.c | 2 +- drivers/mailbox/mailbox-altera.c | 2 +- drivers/mailbox/mailbox.c | 11 +- drivers/mailbox/omap-mailbox.c | 8 +- drivers/mailbox/pcc.c | 2 +- drivers/mailbox/tegra-xusb-mailbox.c | 290 +++ drivers/mfd/Kconfig| 7 + drivers/mfd/Makefile | 1 + drivers/mfd/tegra-xusb.c | 75 ++ drivers/usb/host/Kconfig | 10 + drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-pci.c| 5 - drivers/usb/host/xhci-plat.c | 5 - drivers/usb/host/xhci-tegra.c | 947 + drivers/usb/host/xhci.c| 6 +- include/linux/mailbox_controller.h | 2 +- include/soc/tegra/xusb.h | 43 + 22 files changed, 1568 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt create mode 100644 drivers/mailbox/tegra-xusb-mailbox.c create mode 100644 drivers/mfd/tegra-xusb.c create mode 100644 drivers/usb/host/xhci-tegra.c create mode 100644 include/soc/tegra/xusb.h Applied patches 2, 3,
Re: [PATCH v8 0/9] Tegra xHCI support
Hi Andrew, On 04/05/15 18:36, Andrew Bresticker wrote: > This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: > - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, > - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, > - patches 6 and 7: adding a driver for the mailbox used to communicate >with the xHCI controller's firmware, and > - patches 8 and 9: adding a xHCI host-controller driver. > > The addition of USB PHY support to the XUSB padctl driver has been dropped. > Thierry will be posting those patches later. > > Given the many compile and run-time dependencies in this series, it is > probably > best if the first 3 patches are picked up by the relevant maintainers in topic > branches so that the remainder of the series can go through the Tegra tree. > > Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory > sticks and ethernet dongles. This has also been tested, with additional > out-of-tree patches, on Tegra132 and Tegra210 based boards. For the series, you can add my ... Reviewed-by: Jon Hunter Tested-by: Jon Hunter I have tested this on a t124 nyan-big with USB3.0 and USB2.0 devices. Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v8 0/9] Tegra xHCI support
On Tue, May 05, 2015 at 03:28:25PM +0100, Jon Hunter wrote: > Hi Andrew, > > On 04/05/15 18:36, Andrew Bresticker wrote: > > This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: > > - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, > > - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, > > - patches 6 and 7: adding a driver for the mailbox used to communicate > >with the xHCI controller's firmware, and > > - patches 8 and 9: adding a xHCI host-controller driver. > > > > The addition of USB PHY support to the XUSB padctl driver has been dropped. > > Thierry will be posting those patches later. > > > > Given the many compile and run-time dependencies in this series, it is > > probably > > best if the first 3 patches are picked up by the relevant maintainers in > > topic > > branches so that the remainder of the series can go through the Tegra tree. > > > > Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory > > sticks and ethernet dongles. This has also been tested, with additional > > out-of-tree patches, on Tegra132 and Tegra210 based boards. > > For the series, you can add my ... > > Reviewed-by: Jon Hunter > Tested-by: Jon Hunter > > I have tested this on a t124 nyan-big with USB3.0 and USB2.0 devices. How can this be tested without the corresponding USB PHY patches that I'm supposed to be sending out? Also, can anyone point me at patches that add the device tree nodes which this driver makes use of? Thierry pgpAPaHsbTkXU.pgp Description: PGP signature
Re: [PATCH v8 0/9] Tegra xHCI support
Hi Thierry, On 05/05/15 15:42, Thierry Reding wrote: > * PGP Signed by an unknown key > > On Tue, May 05, 2015 at 03:28:25PM +0100, Jon Hunter wrote: >> Hi Andrew, >> >> On 04/05/15 18:36, Andrew Bresticker wrote: >>> This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: >>> - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, >>> - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, >>> - patches 6 and 7: adding a driver for the mailbox used to communicate >>>with the xHCI controller's firmware, and >>> - patches 8 and 9: adding a xHCI host-controller driver. >>> >>> The addition of USB PHY support to the XUSB padctl driver has been dropped. >>> Thierry will be posting those patches later. >>> >>> Given the many compile and run-time dependencies in this series, it is >>> probably >>> best if the first 3 patches are picked up by the relevant maintainers in >>> topic >>> branches so that the remainder of the series can go through the Tegra tree. >>> >>> Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory >>> sticks and ethernet dongles. This has also been tested, with additional >>> out-of-tree patches, on Tegra132 and Tegra210 based boards. >> >> For the series, you can add my ... >> >> Reviewed-by: Jon Hunter >> Tested-by: Jon Hunter >> >> I have tested this on a t124 nyan-big with USB3.0 and USB2.0 devices. > > How can this be tested without the corresponding USB PHY patches that > I'm supposed to be sending out? > > Also, can anyone point me at patches that add the device tree nodes > which this driver makes use of? Andrew has a branch here [1] for testing this series. Yes, obviously testing without your PHY piece (which I should have mentioned), but at least we can test Andrew's changes. Cheers Jon [1] https://github.com/abrestic/linux/tree/tegra-xhci-v8-test -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v8 0/9] Tegra xHCI support
On Tue, May 05, 2015 at 03:28:25PM +0100, Jon Hunter wrote: Hi Andrew, On 04/05/15 18:36, Andrew Bresticker wrote: This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, - patches 6 and 7: adding a driver for the mailbox used to communicate with the xHCI controller's firmware, and - patches 8 and 9: adding a xHCI host-controller driver. The addition of USB PHY support to the XUSB padctl driver has been dropped. Thierry will be posting those patches later. Given the many compile and run-time dependencies in this series, it is probably best if the first 3 patches are picked up by the relevant maintainers in topic branches so that the remainder of the series can go through the Tegra tree. Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory sticks and ethernet dongles. This has also been tested, with additional out-of-tree patches, on Tegra132 and Tegra210 based boards. For the series, you can add my ... Reviewed-by: Jon Hunter jonath...@nvidia.com Tested-by: Jon Hunter jonath...@nvidia.com I have tested this on a t124 nyan-big with USB3.0 and USB2.0 devices. How can this be tested without the corresponding USB PHY patches that I'm supposed to be sending out? Also, can anyone point me at patches that add the device tree nodes which this driver makes use of? Thierry pgpAPaHsbTkXU.pgp Description: PGP signature
Re: [PATCH v8 0/9] Tegra xHCI support
Hi Andrew, On 04/05/15 18:36, Andrew Bresticker wrote: This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, - patches 6 and 7: adding a driver for the mailbox used to communicate with the xHCI controller's firmware, and - patches 8 and 9: adding a xHCI host-controller driver. The addition of USB PHY support to the XUSB padctl driver has been dropped. Thierry will be posting those patches later. Given the many compile and run-time dependencies in this series, it is probably best if the first 3 patches are picked up by the relevant maintainers in topic branches so that the remainder of the series can go through the Tegra tree. Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory sticks and ethernet dongles. This has also been tested, with additional out-of-tree patches, on Tegra132 and Tegra210 based boards. For the series, you can add my ... Reviewed-by: Jon Hunter jonath...@nvidia.com Tested-by: Jon Hunter jonath...@nvidia.com I have tested this on a t124 nyan-big with USB3.0 and USB2.0 devices. Cheers Jon -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v8 0/9] Tegra xHCI support
Hi Thierry, On 05/05/15 15:42, Thierry Reding wrote: * PGP Signed by an unknown key On Tue, May 05, 2015 at 03:28:25PM +0100, Jon Hunter wrote: Hi Andrew, On 04/05/15 18:36, Andrew Bresticker wrote: This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, - patches 6 and 7: adding a driver for the mailbox used to communicate with the xHCI controller's firmware, and - patches 8 and 9: adding a xHCI host-controller driver. The addition of USB PHY support to the XUSB padctl driver has been dropped. Thierry will be posting those patches later. Given the many compile and run-time dependencies in this series, it is probably best if the first 3 patches are picked up by the relevant maintainers in topic branches so that the remainder of the series can go through the Tegra tree. Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory sticks and ethernet dongles. This has also been tested, with additional out-of-tree patches, on Tegra132 and Tegra210 based boards. For the series, you can add my ... Reviewed-by: Jon Hunter jonath...@nvidia.com Tested-by: Jon Hunter jonath...@nvidia.com I have tested this on a t124 nyan-big with USB3.0 and USB2.0 devices. How can this be tested without the corresponding USB PHY patches that I'm supposed to be sending out? Also, can anyone point me at patches that add the device tree nodes which this driver makes use of? Andrew has a branch here [1] for testing this series. Yes, obviously testing without your PHY piece (which I should have mentioned), but at least we can test Andrew's changes. Cheers Jon [1] https://github.com/abrestic/linux/tree/tegra-xhci-v8-test -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v8 0/9] Tegra xHCI support
This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, - patches 6 and 7: adding a driver for the mailbox used to communicate with the xHCI controller's firmware, and - patches 8 and 9: adding a xHCI host-controller driver. The addition of USB PHY support to the XUSB padctl driver has been dropped. Thierry will be posting those patches later. Given the many compile and run-time dependencies in this series, it is probably best if the first 3 patches are picked up by the relevant maintainers in topic branches so that the remainder of the series can go through the Tegra tree. Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory sticks and ethernet dongles. This has also been tested, with additional out-of-tree patches, on Tegra132 and Tegra210 based boards. Based on v4.1-rc2. A branch with the entire series is available at: https://github.com/abrestic/linux/tree/tegra-xhci-v8 Cc: Jon Hunter Changes from v7: - Move non-shared resources into child nodes of MFD. - Fixed a couple of mailbox driver bugs. Changes from v6: - Dropped PHY changes from series. Will be posted later by Thierry. - Added an MFD device with the mailbox and xHCI host as sub-devices. Changes from v5: - Addressed review comments from Jassi and Felipe. Changes from v4: - Made USB support optional in padctl driver. - Made usb3-port a pinconfig property again. - Cleaned up mbox_request_channel() error handling and allowed it to defer probing (patch 3). - Minor xHCI (patch 1) and mailbox framework (patch 2) cleanups suggested by Thierry. - Addressed Thierry's review comments. Changes from v3: - Fixed USB2.0 flakiness on Jetson-TK1. - Switched to 32-bit DMA mask for host. - Addressed Stephen's review comments. Chagnes from v2: - Dropped mailbox channel specifier. The mailbox driver allocates virtual channels backed by the single physical channel. - Added support for HS_CURR_LEVEL adjustment pinconfig property, which will be required for the Blaze board. - Addressed Stephen's review comments. Changes from v1: - Converted mailbox driver to use the common mailbox framework. - Fixed up host driver so that it can now be built and used as a module. - Addressed Stephen's review comments. - Misc. cleanups. Andrew Bresticker (8): xhci: Set shared HCD's hcd_priv in xhci_gen_setup mailbox: Make mbox_chan_ops const mfd: Add binding document for NVIDIA Tegra XUSB mfd: Add driver for NVIDIA Tegra XUSB mailbox: Add NVIDIA Tegra XUSB mailbox binding mailbox: Add NVIDIA Tegra XUSB mailbox driver usb: Add NVIDIA Tegra xHCI controller binding usb: xhci: Add NVIDIA Tegra xHCI host-controller driver Benson Leung (1): mailbox: Fix up error handling in mbox_request_channel() .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 32 + .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 + .../bindings/usb/nvidia,tegra124-xhci.txt | 96 +++ drivers/mailbox/Kconfig| 8 + drivers/mailbox/Makefile | 2 + drivers/mailbox/arm_mhu.c | 2 +- drivers/mailbox/mailbox-altera.c | 2 +- drivers/mailbox/mailbox.c | 11 +- drivers/mailbox/omap-mailbox.c | 8 +- drivers/mailbox/pcc.c | 2 +- drivers/mailbox/tegra-xusb-mailbox.c | 290 +++ drivers/mfd/Kconfig| 7 + drivers/mfd/Makefile | 1 + drivers/mfd/tegra-xusb.c | 75 ++ drivers/usb/host/Kconfig | 10 + drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-pci.c| 5 - drivers/usb/host/xhci-plat.c | 5 - drivers/usb/host/xhci-tegra.c | 947 + drivers/usb/host/xhci.c| 6 +- include/linux/mailbox_controller.h | 2 +- include/soc/tegra/xusb.h | 43 + 22 files changed, 1568 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt create mode 100644 drivers/mailbox/tegra-xusb-mailbox.c create mode 100644 drivers/mfd/tegra-xusb.c create mode 100644 drivers/usb/host/xhci-tegra.c create mode 100644 include/soc/tegra/xusb.h -- 2.2.0.rc0.207.ga3a616c -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at
[PATCH v8 0/9] Tegra xHCI support
This series adds support for xHCI on NVIDIA Tegra SoCs. This includes: - patches 1, 2, and 3: minor cleanups for mailbox framework and xHCI, - patches 4 and 5: adding an MFD driver for the XUSB cmoplex, - patches 6 and 7: adding a driver for the mailbox used to communicate with the xHCI controller's firmware, and - patches 8 and 9: adding a xHCI host-controller driver. The addition of USB PHY support to the XUSB padctl driver has been dropped. Thierry will be posting those patches later. Given the many compile and run-time dependencies in this series, it is probably best if the first 3 patches are picked up by the relevant maintainers in topic branches so that the remainder of the series can go through the Tegra tree. Tested on Jetson TK1 and Nyan-Big with a variety of USB2.0 and USB3.0 memory sticks and ethernet dongles. This has also been tested, with additional out-of-tree patches, on Tegra132 and Tegra210 based boards. Based on v4.1-rc2. A branch with the entire series is available at: https://github.com/abrestic/linux/tree/tegra-xhci-v8 Cc: Jon Hunter jonath...@nvidia.com Changes from v7: - Move non-shared resources into child nodes of MFD. - Fixed a couple of mailbox driver bugs. Changes from v6: - Dropped PHY changes from series. Will be posted later by Thierry. - Added an MFD device with the mailbox and xHCI host as sub-devices. Changes from v5: - Addressed review comments from Jassi and Felipe. Changes from v4: - Made USB support optional in padctl driver. - Made usb3-port a pinconfig property again. - Cleaned up mbox_request_channel() error handling and allowed it to defer probing (patch 3). - Minor xHCI (patch 1) and mailbox framework (patch 2) cleanups suggested by Thierry. - Addressed Thierry's review comments. Changes from v3: - Fixed USB2.0 flakiness on Jetson-TK1. - Switched to 32-bit DMA mask for host. - Addressed Stephen's review comments. Chagnes from v2: - Dropped mailbox channel specifier. The mailbox driver allocates virtual channels backed by the single physical channel. - Added support for HS_CURR_LEVEL adjustment pinconfig property, which will be required for the Blaze board. - Addressed Stephen's review comments. Changes from v1: - Converted mailbox driver to use the common mailbox framework. - Fixed up host driver so that it can now be built and used as a module. - Addressed Stephen's review comments. - Misc. cleanups. Andrew Bresticker (8): xhci: Set shared HCD's hcd_priv in xhci_gen_setup mailbox: Make mbox_chan_ops const mfd: Add binding document for NVIDIA Tegra XUSB mfd: Add driver for NVIDIA Tegra XUSB mailbox: Add NVIDIA Tegra XUSB mailbox binding mailbox: Add NVIDIA Tegra XUSB mailbox driver usb: Add NVIDIA Tegra xHCI controller binding usb: xhci: Add NVIDIA Tegra xHCI host-controller driver Benson Leung (1): mailbox: Fix up error handling in mbox_request_channel() .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 32 + .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 + .../bindings/usb/nvidia,tegra124-xhci.txt | 96 +++ drivers/mailbox/Kconfig| 8 + drivers/mailbox/Makefile | 2 + drivers/mailbox/arm_mhu.c | 2 +- drivers/mailbox/mailbox-altera.c | 2 +- drivers/mailbox/mailbox.c | 11 +- drivers/mailbox/omap-mailbox.c | 8 +- drivers/mailbox/pcc.c | 2 +- drivers/mailbox/tegra-xusb-mailbox.c | 290 +++ drivers/mfd/Kconfig| 7 + drivers/mfd/Makefile | 1 + drivers/mfd/tegra-xusb.c | 75 ++ drivers/usb/host/Kconfig | 10 + drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-pci.c| 5 - drivers/usb/host/xhci-plat.c | 5 - drivers/usb/host/xhci-tegra.c | 947 + drivers/usb/host/xhci.c| 6 +- include/linux/mailbox_controller.h | 2 +- include/soc/tegra/xusb.h | 43 + 22 files changed, 1568 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt create mode 100644 drivers/mailbox/tegra-xusb-mailbox.c create mode 100644 drivers/mfd/tegra-xusb.c create mode 100644 drivers/usb/host/xhci-tegra.c create mode 100644 include/soc/tegra/xusb.h -- 2.2.0.rc0.207.ga3a616c -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at
