Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Wed, Sep 07, 2016 at 03:50:57PM +0200, Ralf Ramsauer wrote: > Hi all, > > may I *poke* you again? > > We're close to the release of 4.8, and this patch (b5c86b749 upstream) > should still be reverted on mainline Ok, done in fixes now. -Olof
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Wed, Sep 07, 2016 at 03:50:57PM +0200, Ralf Ramsauer wrote: > Hi all, > > may I *poke* you again? > > We're close to the release of 4.8, and this patch (b5c86b749 upstream) > should still be reverted on mainline Ok, done in fixes now. -Olof
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
Hi all,
may I *poke* you again?
We're close to the release of 4.8, and this patch (b5c86b749 upstream)
should still be reverted on mainline
Ralf
On 08/10/2016 10:46 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
> I just notice this was still missing in v4.8-rc1, so I added it to
> the fixes branch now, with a stable tag for v4.7
>
> Arnd
>
--
Ralf Ramsauer
PGP: 0x8F10049B
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
Hi all,
may I *poke* you again?
We're close to the release of 4.8, and this patch (b5c86b749 upstream)
should still be reverted on mainline
Ralf
On 08/10/2016 10:46 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
> I just notice this was still missing in v4.8-rc1, so I added it to
> the fixes branch now, with a stable tag for v4.7
>
> Arnd
>
--
Ralf Ramsauer
PGP: 0x8F10049B
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
Hi,
may I poke you again?
Could you please revert this one (b5c86b7 upstream)? It was only
required for 4.7.x where it got already applied.
Thanks
Ralf
On 08/12/2016 07:26 PM, Ralf Ramsauer wrote:
> On 08/10/2016 10:46 PM, Arnd Bergmann wrote:
>> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab3c in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
tree")
Signed-off-by: Ralf Ramsauer
Acked-by: Thierry Reding
Cc: linux-te...@vger.kernel.org
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> ARM-SoC maintainers,
>>>
>>> Just to clarify, this is targetted at v4.7 because the offending patch
>>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>>> even if this is terribly last minute.
>>>
>>
>> I just notice this was still missing in v4.8-rc1, so I added it to
>> the fixes branch now, with a stable tag for v4.7
> Hi Arnd,
>
> Ahm - this patch should have only be applied if it would have been
> possible to commit it before the release of v4.7.
>
> Mainline Patch b5896f6 ("ARM: tegra: Remove commas from unit addresses
> on Tegra124") which was introduced during the merge window of v4.8 makes
> this patch superfluous and introduces the same error again that we
> initially wanted to fix :-)
>
> This patch is only required for stable v4.7.x.
>
> I think the best is to revert it on mainline, as long as stabilization
> window is still open.
>
> Ralf
>>
>> Arnd
>>
>
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
Hi,
may I poke you again?
Could you please revert this one (b5c86b7 upstream)? It was only
required for 4.7.x where it got already applied.
Thanks
Ralf
On 08/12/2016 07:26 PM, Ralf Ramsauer wrote:
> On 08/10/2016 10:46 PM, Arnd Bergmann wrote:
>> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab3c in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
tree")
Signed-off-by: Ralf Ramsauer
Acked-by: Thierry Reding
Cc: linux-te...@vger.kernel.org
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> ARM-SoC maintainers,
>>>
>>> Just to clarify, this is targetted at v4.7 because the offending patch
>>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>>> even if this is terribly last minute.
>>>
>>
>> I just notice this was still missing in v4.8-rc1, so I added it to
>> the fixes branch now, with a stable tag for v4.7
> Hi Arnd,
>
> Ahm - this patch should have only be applied if it would have been
> possible to commit it before the release of v4.7.
>
> Mainline Patch b5896f6 ("ARM: tegra: Remove commas from unit addresses
> on Tegra124") which was introduced during the merge window of v4.8 makes
> this patch superfluous and introduces the same error again that we
> initially wanted to fix :-)
>
> This patch is only required for stable v4.7.x.
>
> I think the best is to revert it on mainline, as long as stabilization
> window is still open.
>
> Ralf
>>
>> Arnd
>>
>
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On 08/10/2016 10:46 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
> I just notice this was still missing in v4.8-rc1, so I added it to
> the fixes branch now, with a stable tag for v4.7
Hi Arnd,
Ahm - this patch should have only be applied if it would have been
possible to commit it before the release of v4.7.
Mainline Patch b5896f6 ("ARM: tegra: Remove commas from unit addresses
on Tegra124") which was introduced during the merge window of v4.8 makes
this patch superfluous and introduces the same error again that we
initially wanted to fix :-)
This patch is only required for stable v4.7.x.
I think the best is to revert it on mainline, as long as stabilization
window is still open.
Ralf
>
> Arnd
>
--
Ralf Ramsauer
PGP: 0x8F10049B
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On 08/10/2016 10:46 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
> I just notice this was still missing in v4.8-rc1, so I added it to
> the fixes branch now, with a stable tag for v4.7
Hi Arnd,
Ahm - this patch should have only be applied if it would have been
possible to commit it before the release of v4.7.
Mainline Patch b5896f6 ("ARM: tegra: Remove commas from unit addresses
on Tegra124") which was introduced during the merge window of v4.8 makes
this patch superfluous and introduces the same error again that we
initially wanted to fix :-)
This patch is only required for stable v4.7.x.
I think the best is to revert it on mainline, as long as stabilization
window is still open.
Ralf
>
> Arnd
>
--
Ralf Ramsauer
PGP: 0x8F10049B
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> > c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> > quirk, wrong addresses were introduced. Fix it and use the correct
> > addresses.
> >
> > Thierry let me know, that there is another patch (b5896f67ab3c in
> > linux-next) in preparation which removes all the '0,' prefixes of unit
> > addresses on Tegra124 and is planned to go upstream in 4.8, so
> > this patch will get reverted then.
> >
> > But for the moment, this patch is necessary to fix current misbehaviour.
> >
> > Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> > tree")
> > Signed-off-by: Ralf Ramsauer
> > Acked-by: Thierry Reding
> > Cc: linux-te...@vger.kernel.org
> > ---
> > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
>
> ARM-SoC maintainers,
>
> Just to clarify, this is targetted at v4.7 because the offending patch
> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
> even if this is terribly last minute.
>
I just notice this was still missing in v4.8-rc1, so I added it to
the fixes branch now, with a stable tag for v4.7
Arnd
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> > c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> > quirk, wrong addresses were introduced. Fix it and use the correct
> > addresses.
> >
> > Thierry let me know, that there is another patch (b5896f67ab3c in
> > linux-next) in preparation which removes all the '0,' prefixes of unit
> > addresses on Tegra124 and is planned to go upstream in 4.8, so
> > this patch will get reverted then.
> >
> > But for the moment, this patch is necessary to fix current misbehaviour.
> >
> > Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> > tree")
> > Signed-off-by: Ralf Ramsauer
> > Acked-by: Thierry Reding
> > Cc: linux-te...@vger.kernel.org
> > ---
> > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
>
> ARM-SoC maintainers,
>
> Just to clarify, this is targetted at v4.7 because the offending patch
> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
> even if this is terribly last minute.
>
I just notice this was still missing in v4.8-rc1, so I added it to
the fixes branch now, with a stable tag for v4.7
Arnd
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Sun, Jul 24, 2016 at 10:38:38PM +0200, Ralf Ramsauer wrote:
> On 07/21/2016 02:28 PM, Arnd Bergmann wrote:
> > On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
> >> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> >>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> >>> quirk, wrong addresses were introduced. Fix it and use the correct
> >>> addresses.
> >>>
> >>> Thierry let me know, that there is another patch (b5896f67ab3c in
> >>> linux-next) in preparation which removes all the '0,' prefixes of unit
> >>> addresses on Tegra124 and is planned to go upstream in 4.8, so
> >>> this patch will get reverted then.
> >>>
> >>> But for the moment, this patch is necessary to fix current misbehaviour.
> >>>
> >>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> >>> tree")
> >>> Signed-off-by: Ralf Ramsauer
> >>> Acked-by: Thierry Reding
> >>> Cc: linux-te...@vger.kernel.org
> >>> ---
> >>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> >>> 1 file changed, 2 insertions(+), 2 deletions(-)
> >>
> >> ARM-SoC maintainers,
> >>
> >> Just to clarify, this is targetted at v4.7 because the offending patch
> >> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
> >> even if this is terribly last minute.
> >>
> >
> > I've applied it to the fixes branch, but as Linus is currently offline
> > and hasn't pulled the previous set of fixes, I suspect it's not
> > going to make it.
> Yep, didn't make it. I'll resend the fix with stable in Cc tomorrow.
> Keep you also in Cc.
>
> Thierry, this fix is only required for 4.7.x and gets superfluous when
> b5896f67ab3c is applied. So I guess there is no need to fix mainline, right?
Agreed.
Thierry
signature.asc
Description: PGP signature
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Sun, Jul 24, 2016 at 10:38:38PM +0200, Ralf Ramsauer wrote:
> On 07/21/2016 02:28 PM, Arnd Bergmann wrote:
> > On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
> >> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> >>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> >>> quirk, wrong addresses were introduced. Fix it and use the correct
> >>> addresses.
> >>>
> >>> Thierry let me know, that there is another patch (b5896f67ab3c in
> >>> linux-next) in preparation which removes all the '0,' prefixes of unit
> >>> addresses on Tegra124 and is planned to go upstream in 4.8, so
> >>> this patch will get reverted then.
> >>>
> >>> But for the moment, this patch is necessary to fix current misbehaviour.
> >>>
> >>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> >>> tree")
> >>> Signed-off-by: Ralf Ramsauer
> >>> Acked-by: Thierry Reding
> >>> Cc: linux-te...@vger.kernel.org
> >>> ---
> >>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> >>> 1 file changed, 2 insertions(+), 2 deletions(-)
> >>
> >> ARM-SoC maintainers,
> >>
> >> Just to clarify, this is targetted at v4.7 because the offending patch
> >> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
> >> even if this is terribly last minute.
> >>
> >
> > I've applied it to the fixes branch, but as Linus is currently offline
> > and hasn't pulled the previous set of fixes, I suspect it's not
> > going to make it.
> Yep, didn't make it. I'll resend the fix with stable in Cc tomorrow.
> Keep you also in Cc.
>
> Thierry, this fix is only required for 4.7.x and gets superfluous when
> b5896f67ab3c is applied. So I guess there is no need to fix mainline, right?
Agreed.
Thierry
signature.asc
Description: PGP signature
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On 07/21/2016 02:28 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
> I've applied it to the fixes branch, but as Linus is currently offline
> and hasn't pulled the previous set of fixes, I suspect it's not
> going to make it.
Yep, didn't make it. I'll resend the fix with stable in Cc tomorrow.
Keep you also in Cc.
Thierry, this fix is only required for 4.7.x and gets superfluous when
b5896f67ab3c is applied. So I guess there is no need to fix mainline, right?
Ralf
>
> Olof, do you think we should send an amended pull request, or are
> we at the point where nothing gets pulled anyway?
>
> Arnd
>
--
Ralf Ramsauer
GPG: 0x8F10049B
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On 07/21/2016 02:28 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
> I've applied it to the fixes branch, but as Linus is currently offline
> and hasn't pulled the previous set of fixes, I suspect it's not
> going to make it.
Yep, didn't make it. I'll resend the fix with stable in Cc tomorrow.
Keep you also in Cc.
Thierry, this fix is only required for 4.7.x and gets superfluous when
b5896f67ab3c is applied. So I guess there is no need to fix mainline, right?
Ralf
>
> Olof, do you think we should send an amended pull request, or are
> we at the point where nothing gets pulled anyway?
>
> Arnd
>
--
Ralf Ramsauer
GPG: 0x8F10049B
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On 07/21/2016 02:28 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
Arnd,
> I've applied it to the fixes branch, but as Linus is currently offline
> and hasn't pulled the previous set of fixes, I suspect it's not
> going to make it.
thank you very much. If it's not merged in 4.7 then I'll follow up with
a revert patch with stable in Cc.
Ralf
>
> Olof, do you think we should send an amended pull request, or are
> we at the point where nothing gets pulled anyway?
>
> Arnd
>
--
Ralf Ramsauer
PGP: 0x8F10049B
signature.asc
Description: OpenPGP digital signature
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On 07/21/2016 02:28 PM, Arnd Bergmann wrote:
> On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
>> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
>>> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
>>> quirk, wrong addresses were introduced. Fix it and use the correct
>>> addresses.
>>>
>>> Thierry let me know, that there is another patch (b5896f67ab3c in
>>> linux-next) in preparation which removes all the '0,' prefixes of unit
>>> addresses on Tegra124 and is planned to go upstream in 4.8, so
>>> this patch will get reverted then.
>>>
>>> But for the moment, this patch is necessary to fix current misbehaviour.
>>>
>>> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
>>> tree")
>>> Signed-off-by: Ralf Ramsauer
>>> Acked-by: Thierry Reding
>>> Cc: linux-te...@vger.kernel.org
>>> ---
>>> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> ARM-SoC maintainers,
>>
>> Just to clarify, this is targetted at v4.7 because the offending patch
>> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
>> even if this is terribly last minute.
>>
>
Arnd,
> I've applied it to the fixes branch, but as Linus is currently offline
> and hasn't pulled the previous set of fixes, I suspect it's not
> going to make it.
thank you very much. If it's not merged in 4.7 then I'll follow up with
a revert patch with stable in Cc.
Ralf
>
> Olof, do you think we should send an amended pull request, or are
> we at the point where nothing gets pulled anyway?
>
> Arnd
>
--
Ralf Ramsauer
PGP: 0x8F10049B
signature.asc
Description: OpenPGP digital signature
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> > c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> > quirk, wrong addresses were introduced. Fix it and use the correct
> > addresses.
> >
> > Thierry let me know, that there is another patch (b5896f67ab3c in
> > linux-next) in preparation which removes all the '0,' prefixes of unit
> > addresses on Tegra124 and is planned to go upstream in 4.8, so
> > this patch will get reverted then.
> >
> > But for the moment, this patch is necessary to fix current misbehaviour.
> >
> > Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> > tree")
> > Signed-off-by: Ralf Ramsauer
> > Acked-by: Thierry Reding
> > Cc: linux-te...@vger.kernel.org
> > ---
> > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
>
> ARM-SoC maintainers,
>
> Just to clarify, this is targetted at v4.7 because the offending patch
> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
> even if this is terribly last minute.
>
I've applied it to the fixes branch, but as Linus is currently offline
and hasn't pulled the previous set of fixes, I suspect it's not
going to make it.
Olof, do you think we should send an amended pull request, or are
we at the point where nothing gets pulled anyway?
Arnd
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Monday, July 18, 2016 11:58:02 AM CEST Thierry Reding wrote:
> On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> > c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> > quirk, wrong addresses were introduced. Fix it and use the correct
> > addresses.
> >
> > Thierry let me know, that there is another patch (b5896f67ab3c in
> > linux-next) in preparation which removes all the '0,' prefixes of unit
> > addresses on Tegra124 and is planned to go upstream in 4.8, so
> > this patch will get reverted then.
> >
> > But for the moment, this patch is necessary to fix current misbehaviour.
> >
> > Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> > tree")
> > Signed-off-by: Ralf Ramsauer
> > Acked-by: Thierry Reding
> > Cc: linux-te...@vger.kernel.org
> > ---
> > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
>
> ARM-SoC maintainers,
>
> Just to clarify, this is targetted at v4.7 because the offending patch
> was merged in v4.7-rc1. If at all possible it'd be great to get this in,
> even if this is terribly last minute.
>
I've applied it to the fixes branch, but as Linus is currently offline
and hasn't pulled the previous set of fixes, I suspect it's not
going to make it.
Olof, do you think we should send an amended pull request, or are
we at the point where nothing gets pulled anyway?
Arnd
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> quirk, wrong addresses were introduced. Fix it and use the correct
> addresses.
>
> Thierry let me know, that there is another patch (b5896f67ab3c in
> linux-next) in preparation which removes all the '0,' prefixes of unit
> addresses on Tegra124 and is planned to go upstream in 4.8, so
> this patch will get reverted then.
>
> But for the moment, this patch is necessary to fix current misbehaviour.
>
> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> tree")
> Signed-off-by: Ralf Ramsauer
> Acked-by: Thierry Reding
> Cc: linux-te...@vger.kernel.org
> ---
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
ARM-SoC maintainers,
Just to clarify, this is targetted at v4.7 because the offending patch
was merged in v4.7-rc1. If at all possible it'd be great to get this in,
even if this is terribly last minute.
Thanks,
Thierry
>
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 941f362..f4d8125 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1386,7 +1386,7 @@
>* Pin 41: BR_UART1_TXD
>* Pin 44: BR_UART1_RXD
>*/
> - serial@70006000 {
> + serial@0,70006000 {
> compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
> status = "okay";
> };
> @@ -1398,7 +1398,7 @@
>* Pin 71: UART2_CTS_L
>* Pin 74: UART2_RTS_L
>*/
> - serial@70006040 {
> + serial@0,70006040 {
> compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
> status = "okay";
> };
> --
> 2.7.3
>
signature.asc
Description: PGP signature
Re: [RESEND PATCH] ARM: tegra: fix erroneous address in dts
On Mon, Jul 18, 2016 at 11:46:48AM +0200, Ralf Ramsauer wrote:
> c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
> quirk, wrong addresses were introduced. Fix it and use the correct
> addresses.
>
> Thierry let me know, that there is another patch (b5896f67ab3c in
> linux-next) in preparation which removes all the '0,' prefixes of unit
> addresses on Tegra124 and is planned to go upstream in 4.8, so
> this patch will get reverted then.
>
> But for the moment, this patch is necessary to fix current misbehaviour.
>
> Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device
> tree")
> Signed-off-by: Ralf Ramsauer
> Acked-by: Thierry Reding
> Cc: linux-te...@vger.kernel.org
> ---
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
ARM-SoC maintainers,
Just to clarify, this is targetted at v4.7 because the offending patch
was merged in v4.7-rc1. If at all possible it'd be great to get this in,
even if this is terribly last minute.
Thanks,
Thierry
>
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 941f362..f4d8125 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1386,7 +1386,7 @@
>* Pin 41: BR_UART1_TXD
>* Pin 44: BR_UART1_RXD
>*/
> - serial@70006000 {
> + serial@0,70006000 {
> compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
> status = "okay";
> };
> @@ -1398,7 +1398,7 @@
>* Pin 71: UART2_CTS_L
>* Pin 74: UART2_RTS_L
>*/
> - serial@70006040 {
> + serial@0,70006040 {
> compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
> status = "okay";
> };
> --
> 2.7.3
>
signature.asc
Description: PGP signature
[RESEND PATCH] ARM: tegra: fix erroneous address in dts
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab3c in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer
Acked-by: Thierry Reding
Cc: linux-te...@vger.kernel.org
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 941f362..f4d8125 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1386,7 +1386,7 @@
* Pin 41: BR_UART1_TXD
* Pin 44: BR_UART1_RXD
*/
- serial@70006000 {
+ serial@0,70006000 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
@@ -1398,7 +1398,7 @@
* Pin 71: UART2_CTS_L
* Pin 74: UART2_RTS_L
*/
- serial@70006040 {
+ serial@0,70006040 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
--
2.7.3
[RESEND PATCH] ARM: tegra: fix erroneous address in dts
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab3c in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer
Acked-by: Thierry Reding
Cc: linux-te...@vger.kernel.org
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 941f362..f4d8125 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1386,7 +1386,7 @@
* Pin 41: BR_UART1_TXD
* Pin 44: BR_UART1_RXD
*/
- serial@70006000 {
+ serial@0,70006000 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
@@ -1398,7 +1398,7 @@
* Pin 71: UART2_CTS_L
* Pin 74: UART2_RTS_L
*/
- serial@70006040 {
+ serial@0,70006040 {
compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
status = "okay";
};
--
2.7.3
