Re: APIC error interrupt routine.
On Sun, 10 Sep 2000, Chris Chiappa wrote: > It's not really a big deal to me since I'm getting rid of the BP6 in 2 or 3 > weeks, but it's definitely my last ABIT product. Does anyone else make a dual celeron capable mobo that is socket 370? The heatsink/fan layout is not-removable from my procs (so I can't put them into a slot-1 adapter) and I'd like to salvage them somehow rather trying to ebay them or something. Spending ~$100 for a new mobo is better than taking it in the shorts getting rid of them all. =-=-=-=-=-= Robert Hayden [EMAIL PROTECTED] UIN: 16570192 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
Re: APIC error interrupt routine.
On Sat, Aug 19, 2000 at 12:34:17AM +0200, Ingo Molnar wrote: > > You're one of the lucky ones then. I have a non-overclocked BP6, CPUs > > at default voltage and cooling fans up the wazoo (I even have a 486 > > fan with extra grease strapped to the BX) and if I run CPU intensive > > apps, I still generate a bunch of APIC errors. [...] > could you try to lower the CPU voltage by 0.05V or 0.10V (below the > default), does it make a difference? If not, please try to increase CPU > volate by the same amount - any difference? What CPU speed, system bus > speed and PCI/AGP bus speed do you have - you can see it in the Soft-CPU > menu. The ABP6 system here has two 466MHz Celerons, 66MHz(1/2) system > bus/PCI speed, x4.5 multiplier, AGPCLK 2/3 and 2.05v core voltage. And for > the duration of the test, could you keep the cover(s) open, so that air > circulates better. Finally got all this done (been a bit busy moving etc). I was able to generate APIC errors while running the Seti@Home client at 1.90, 1.95, 2.00, 2.05 and 2.10 Volts. Cover was off for all tests. It seemed like APIC errors were less common at the higher voltages, but I didn't bother to make any records to compare etc. Setup is: 400MHz CPUs, 66MHz bus rate, Default AGPCLK (I assume 2/3), QQ Beta BIOS Power supply is a PC Power & Cooling turbo cool 300, I have another fan in the front of the box and a 486 fan over the BX chipset. Other peripherals: 1 Toshiba SCSI DVD drive 3 x IBM UW SCSI hard drives Matrox G400 AGP Diamond Dual Fireport 40 (Symbios 876 chip) Creative Ensoniq Soundscape 3C905A Ethernet ISA modem It's not really a big deal to me since I'm getting rid of the BP6 in 2 or 3 weeks, but it's definitely my last ABIT product. -- ..ooOO [EMAIL PROTECTED]| My opinions are my own OOoo.. ..ooOO [EMAIL PROTECTED] | and certainly not those OOoo.. ..ooOO http://www.snurgle.org/~griffon/ | of my employer OOoo.. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
Re: APIC error interrupt routine.
On Sat, Aug 19, 2000 at 12:34:17AM +0200, Ingo Molnar wrote: You're one of the lucky ones then. I have a non-overclocked BP6, CPUs at default voltage and cooling fans up the wazoo (I even have a 486 fan with extra grease strapped to the BX) and if I run CPU intensive apps, I still generate a bunch of APIC errors. [...] could you try to lower the CPU voltage by 0.05V or 0.10V (below the default), does it make a difference? If not, please try to increase CPU volate by the same amount - any difference? What CPU speed, system bus speed and PCI/AGP bus speed do you have - you can see it in the Soft-CPU menu. The ABP6 system here has two 466MHz Celerons, 66MHz(1/2) system bus/PCI speed, x4.5 multiplier, AGPCLK 2/3 and 2.05v core voltage. And for the duration of the test, could you keep the cover(s) open, so that air circulates better. Finally got all this done (been a bit busy moving etc). I was able to generate APIC errors while running the Seti@Home client at 1.90, 1.95, 2.00, 2.05 and 2.10 Volts. Cover was off for all tests. It seemed like APIC errors were less common at the higher voltages, but I didn't bother to make any records to compare etc. Setup is: 400MHz CPUs, 66MHz bus rate, Default AGPCLK (I assume 2/3), QQ Beta BIOS Power supply is a PC Power Cooling turbo cool 300, I have another fan in the front of the box and a 486 fan over the BX chipset. Other peripherals: 1 Toshiba SCSI DVD drive 3 x IBM UW SCSI hard drives Matrox G400 AGP Diamond Dual Fireport 40 (Symbios 876 chip) Creative Ensoniq Soundscape 3C905A Ethernet ISA modem It's not really a big deal to me since I'm getting rid of the BP6 in 2 or 3 weeks, but it's definitely my last ABIT product. -- ..ooOO [EMAIL PROTECTED]| My opinions are my own OOoo.. ..ooOO [EMAIL PROTECTED] | and certainly not those OOoo.. ..ooOO http://www.snurgle.org/~griffon/ | of my employer OOoo.. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
Re: APIC error interrupt routine.
On Sun, 10 Sep 2000, Chris Chiappa wrote: It's not really a big deal to me since I'm getting rid of the BP6 in 2 or 3 weeks, but it's definitely my last ABIT product. Does anyone else make a dual celeron capable mobo that is socket 370? The heatsink/fan layout is not-removable from my procs (so I can't put them into a slot-1 adapter) and I'd like to salvage them somehow rather trying to ebay them or something. Spending ~$100 for a new mobo is better than taking it in the shorts getting rid of them all. =-=-=-=-=-= Robert Hayden [EMAIL PROTECTED] UIN: 16570192 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/